Scribd
Upload
76 views

Learning Outcome: STAAD - Pro & PROKON

The document outlines the learning objectives of training courses in STAAD.Pro, PROKON, ETABS, and SAFE structural analysis and design software. Some key topics covered include modeling plane and space frames, understanding static determinacy, modeling trusses and frames, applying loads, performing analyses, extracting results, and designing structural elements like foundations, columns, beams, and slabs. The training aims to teach modeling, analysis, and design of steel, concrete, and composite buildings according to various codes.

Uploaded by

mohd sumer
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
76 views

Learning Outcome: STAAD - Pro & PROKON

The document outlines the learning objectives of training courses in STAAD.Pro, PROKON, ETABS, and SAFE structural analysis and design software. Some key topics covered include modeling plane and space frames, understanding static determinacy, modeling trusses and frames, applying loads, performing analyses, extracting results, and designing structural elements like foundations, columns, beams, and slabs. The training aims to teach modeling, analysis, and design of steel, concrete, and composite buildings according to various codes.

Uploaded by

mohd sumer
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Learning Outcome: STAAD.

Pro & PROKON


 Understanding the usage of Plane and Space Frame Analysis
 Modeling the Truss – 2D Frame
 Modeling the 3D Frame Analysis
 Understanding difference between statically determinate structure Vs.
Indeterminate structure
 Modeling the 2D Truss and 3D Frame Analysis by using STAAD Editor
 Short cut tool to check the Structural steel model
 Modeling the plate (Either steel / concrete)
 Understanding the different kind of support system
 Advantages of using Simply support and Fixed support
 Modeling the Ware House (Steel Structure)
 Modeling the office Building (Steel structure)
 Modeling the Mono pitch Roof
 Modeling the Tie beam (Concrete Structure) along with the 3D Steel structural
model
 Adding the Mezzanine floor in the 3D Steel structural Model
 Assigning the different kind of supports
 Assigning the steel section sizes with respect to the design
requirements/Arch./other disciplines
 Changing the axis of structural steel section with respect to Arch.
Requirements.
 Creating the different kind of load cases for Gravity and Lateral (Wind,
Seismic)
 Understanding the Codal requirements for Imposed load with respect to the
Arch. Disciplines
 Understanding the application of Wind force (Upward & Downward Wind
force)
 Understanding the application of Seismic force
 Understanding the load combination as per British Standard
 Understanding the load combination as per American Standard
 Understanding the load combination as per UBC code
 Assigning the different kind of Load combination (Ultimate & Service) with
respect to BS, ACI & UBC.
 Understanding the Moment Release on beams
 Understanding the moment release on Floating columns
 Assigning the Different kind of loads as
 Applying the moment on the structural steel element
 How to Analyze the model
 Understanding the Design parameters prior to run the analysis.
 Extracting the Base Reaction from the 3D Steel structural model
 Extracting the Bending moment and Shear force from the Structural elements.
 Extracting the Diagrammatic Bending moment and Shear force from 3D Steel
Structural model.
 Designing the Different kind of foundation as follows.
 Isolated Footing
 Designing the steel structure with different codes such as ACI, BS & EN
 Comparing the Actual programme Drift Vs. Codal provisions
CONCRETE DESIGN BY USING ETABS AND SAFE

ETABS MODEL
ETABS is a program designed for the purpose of analyzing the architectural design of
buildings. Arabian info tech offers various courses in the following topics for
professionals wishing to undergo ETABS training in Dubai.

 Modeling Part
 Structural Analysis Part
 Design Part

ETABS Building & Modeling

 Creating the different kind structure with respect to Architecture


 Checking the force/Reaction
o Influence area method
o Comparing the reaction with SAFE
 Assigning the Diaphragm – Wind force (BS/ACI)
 Assigning the Load cases (BS/ACI)
 Assigning the seismic force (UBC 97)
 Assigning the modulus of elasticity (BS/ACI)

Structural Engineering Analysis

 Assigning the load combination (BS/ACI & UBC 97)


 Construction sequence analysis
 Response spectrum analysis
 P-Delta Analysis
 Stress & Failure analysis
 Time period calculation
 Calculate the displacement due to wind

ETABS Building Design

 Column Design (BS/ACI)


 Wall Design
 Beam Design
 Extracting the Reinforcement details from ETABS.
 Extracting the stresses due to temperature
 Understanding the placement of reinforcement.

SAFE MODEL
SAFE is the ultimate tool for designing concrete floors and foundation systems. From
farming layout all the way through to detail drawing production, SAFE integrates
every aspects of Structural engineering design process in one easy and intuitive
environment.
Arabian info tech offers various courses in the following topics for professionals
wishing to undergo Concrete Design training in Dubai.

 Modeling Part
 Structural Analysis Part
 Design Part

Modeling Part:

 Creating different kind of slab shapes with respect to Architecture.


 Importing the DXF file from AUTOCAD
 Assigning the load cases
 Modeling the foundations

Structural Analysis Part:

 Assigning the load combination (BS/ACI & UBI 97)


 Assigning the subgrade modulus of raft foundation.
 Assigning the vertical & horizontal spring constant of Pile foundation.
 Extracting the reaction from structural 3D model.
 Analyzing the foundation

Design Part:

 Designing the suspended slab and reinforcement


 Designing the beams and extracting the reinforcement
 Modeling the reinforcement strips
 Understanding the placement of reinforcement (Slab & Beam)
 Understanding the placement of reinforcement of foundation
 Checking the soil pressure of foundation
 Checking the deflection of slabs
 Calculating the modulus of ruptures.

Why study ETABS training with Arabian Info tech


Arabian Info Tech provides structural engineering, Etabs training and precast concrete
design in Dubai. Creating the different kinds shapes in regards to Architecture &
Etabs building design.

Throughout classes at Arabian Info tech our expert tutors keep skill developments and
merit under observation. Every student will be tested and evaluated at each ending
term. Arabian InfoTech will also dedicate time to student wishing to seek further help
if and when required.

Our ETABS courses are aimed at those wishing to expand their existing skills or
delve into a new career. If this sounds like something you may be interested in contact
us today

You might also like