Scribd
Upload
227 views

What Are The Different Types of Sequential Circuits

Sequential circuits are logical circuits where the output depends on the present input as well as the sequence of past inputs. They contain both combinational logic and storage elements. There are two main types of sequential circuits: synchronous circuits which use a clock signal to synchronize state changes, and asynchronous circuits which change state in response to input changes without a clock. Common examples of sequential circuits include flip-flops such as RS, JK, D and T flip-flops which are fundamental building blocks used to store state in digital circuits and systems.

Uploaded by

alvin castro
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
227 views

What Are The Different Types of Sequential Circuits

Sequential circuits are logical circuits where the output depends on the present input as well as the sequence of past inputs. They contain both combinational logic and storage elements. There are two main types of sequential circuits: synchronous circuits which use a clock signal to synchronize state changes, and asynchronous circuits which change state in response to input changes without a clock. Common examples of sequential circuits include flip-flops such as RS, JK, D and T flip-flops which are fundamental building blocks used to store state in digital circuits and systems.

Uploaded by

alvin castro
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 10

What Are The Different Types of

Sequential Circuits?
 ELECTRONICS
0 COMMENT

A sequential circuit is a logical circuit, where the output depends on the present value of
the input signal as well as the sequence of past inputs. While a combinational circuit is a
function of present input only. A sequential circuit is a combination of combinational circuit
and a storage element. the sequential circuits use current input variables and previous
input variables which are stored and provides the data to the circuit on the next clock
cycle.

Sequential
Circuits Block Diagram
Types of Sequential Circuits
The sequential circuits are classified into two types
 Synchronous Circuit
 Asynchronous Circuit
In synchronous sequential circuits, the state of device changes at discrete times in
response to a clock signal. In asynchronous circuits, the state of the device changes in
response to changing inputs.

Synchronous Circuits
In synchronous circuits, the inputs are pulses with certain restrictions on pulse width and
propagation delay. Thus synchronous circuits can be divided into clocked and un-clocked
or pulsed sequential circuits.

Synchronous Circuit
Clocked Sequential Circuit
The clocked sequential circuits have flip-flops or gated latches for its memory elements.
There is a periodic clock connected to the clock inputs of all the memory elements of the
circuit to synchronize all the internal changes of state. Hence the operation of the circuit
is controlled and synchronized by the periodic pulse of the clock.

Cocked Sequential
Unclocked Sequential Circuit
In an unclocked sequential circuit requires two consecutive transitions between 0 and 1
to alternate the state of the circuit. An unclocked mode circuit is designed to respond to
pulses of certain durations which do not affect the circuit’s behaviour.
UnClocked Sequential
The synchronous logic circuit is very simple. The logic gates which perform the operations
on the data, require a finite amount of time to respond to the changes in the input.
Asynchronous Circuits
An asynchronous circuit does not have a clock signal to synchronize its internal changes
of the state. Hence the state change occurs in direct response to changes that occur in
primary input lines. An asynchronous circuit does not require the precise timing control
from flip-flops.

Asynchronous Circuit
Asynchronous logic is more difficult to design and it has some problems compared to
synchronous logic. The main problem is that the digital memory is sensitive to the order
that their input signals arrive them, like, if two signals arrive at a flip-flop at the same time,
which state the circuit goes into can depend on which signal gets to the logic gate first.

Asynchronous circuits are used in critical parts of synchronous systems where the speed
of the system is a priority, like as in microprocessors and digital signal processing circuits.
Flip Flop Circuit
A flip-flop is a sequential circuit which samples the input and changes the output at a
particular instance of time. It has two stable states and can be used to store the state
information. Signals are applied to one or more control inputs to change the state of the
circuit and will have one or two outputs.

It is the basic storage element in sequential logic and fundamental building blocks of
digital electronic systems. They can be used to keep a record of the value of a variable.
Flip-flop is also used to control the functionality of a circuit.

RS Flip Flop
The R-S flip-flop is the simplest flip-flop. It has two outputs, one output is the reverse of
the other, and two inputs. The two inputs are Set and Reset. The flip-flop basically uses
NAND gates with an additional enable pin. The circuit gives output only when the enable
pin is high.

Block Diagram

SR Flip Flop Block


Diagram
Circuit Diagram

SR Flip Flop Circuit


Diagram
SR Flip Flop Truth Table
SR Flip Flop Truth Table
JK Flip Flop
JK flip-flop is one of the important flip-flops. If the J and K inputs are one and when the
clock is applied, the output changes regardless of past condition. If the J and K inputs are
0 and when the clock is applied, there will be no change in the output. There is no
indeterminate condition in the JK flip-flop.

Circuit Diagram
JK
Flip Flop Circuit
JK Flip Flop Truth Table

JK Flip Flop
Truth Table
D Flip Flop
D flip-flop has a single data line and a clock input.The D flip-flop is the simplification of an
SR flip-flop. The input of the D flip-flop goes directly to the input S and the compliment
goes to input R. D input is sampled throughout the clock pulse.
Circuit Diagram

D
flip flop Circuit
D flip flop Truth Table

D flip flop Truth


Table
T Flip Flop
It is a method of avoiding indeterminate state found in the process of an RS flip-flop. It is
to provide only one input, i.e. T input. This flip-flop acts as a Toggle switch. Toggle means
to change to another state. T flip-flop is designed from clocked RS flip-flop.

Circuit Diagram
T Flip Flop Circuit
T Flip Flop Truth Table

T Flip Flop Truth


Table
Electronic Oscillator
An electronic oscillator is an electronic circuit that produces periodic, oscillating signals.
An oscillator converts direct current from a power supply to an alternating current signal.
Electronic Oscillator
An oscillator is an amplifier which provides feedback with an input signal. It is a non-
rotating device to produce alternating current. Enough power must be fed back to the
input circuit for the oscillator to drive itself. The feedback signal in the oscillator is
regenerative.

Electronic oscillators are classified into two categories

 Sinusoidal or Harmonic Oscillator


 Non-sinusoidal or Relaxation Oscillator
Sinusoidal or Harmonic Oscillator
The oscillators that give an output as a sine wave are called as sinusoidal oscillators.
These oscillators can provide the output at frequencies ranging from 20Hz to GHz.
Depending on the material or components used in oscillator, Sinusoidal oscillators are
further classified into four types

 Tuned Circuit Oscillator


 RC Oscillator
 Crystal Oscillator
 Negative Resistance Oscillator
Non-Sinusoidal or Relaxation Oscillator
Non-sinusoidal oscillators provide output in the form of a square, rectangular or sawtooth
waveform. These oscillators can provide an output at frequencies ranging from 0 to
20MHz.

Applications of Sequential Logic Circuits


The major applications of a Sequential Logic Circuits are,

 As a counter, shift register, flip-flops.


 Used to build the memory unit.
 As programmable devices (PLDs, FPGA, CPLDs)
This is all about the sequential circuits. The sequential circuits are the circuits, where the
immediate value of outputs depends on the immediate values of inputs and also on states
they were in previously. They contain memory blocks for storing the previous state of the
circuit.

Furthermore, any queries regarding this article or any help in implementing electrical and
electronics projects, you can approach us by commenting in the comment section below.
Here is a question for you, What is mean by sequential circuits?

You might also like