VARIO GT 24

The variable Girder Wall Formwork System

with the proven Lattice Girder GT 24

Product Brochure – Issue 11/2017

PERI GmbH
Formwork Scaffolding Engineering
Rudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950 - 0
Fax +49 (0)7309.951- 0
[email protected]
www.peri.com

Important Notes

All current safety regulations and guidelines must be

observed in those countries where our products are
used.

The photos shown in this brochure feature construction

sites in progress. For this reason, safety and anchor
details in particular cannot always be considered as
conclusive or final. These are subject to the risk assess-
ment carried out by the contractor.

In addition, computer graphics are used which are to

be understood as system representations. For ensuring
a better understanding, these and the detailed illustra-
tions shown have been partially reduced to certain
aspects. The safety installations which have possibly
not been shown in these detailed descriptions must
nevertheless be available.

The systems or items shown might not be available in

every country.

Safety instructions and load specifications are to be

strictly observed at all times. Separate structural calcu-
lations are required in case of changes and deviations.

The information contained herein is subject to technical

changes in the interests of progress. Errors and typo-
graphical mistakes reserved.
 Content

General
2 The variable girder wall formwork system
6 Complicated geometries with standard system
components
8 The GT 24 lattice girder
10 The standard system components of a
VARIO GT 24 panel

Standard Applications
12 VARIO GT 24 standard panels
14 Continuously adjustable panel connections
16 Fillers, stopend formwork and panel width
extension units
18 External corners, internal corners and shafts
20 Push-pull prop connector, crane lifting units
22 Working and Concreting Scaffold
24 Panel extensions

Special applications
26 Architectural concrete
30 Bridge construction
34 Water-retaining structures
38 Single-sided walls

40 Components

1
General
The variable girder wall formwork system

VARIO GT 24 is the proven girder wall

formwork system complete with the
continuously adjustable elongated
hole couplings.

Regardless whether it is industrial or

residential construction, bridge abut-
ments or retaining walls, every layout
and any height up to 18 m can be
formed with PERI VARIO.

The 30 cm increments of the

GT 24 girder allow easy ad-
justment to suit the required
height.

Pre-assembled, ready-to-use platforms

provide site personnel with a very
high level of safety, as well as large
time savings particularly with multiple
usage.

2
 Extended VARIO GT 24 The VARIO GT 24 girder wall formwork
panels being used
to shutter administration
system offers many advantages. This
building. includes simple planning, minimum
on-site material requirements and
fast, efficient formwork sequencing.

Optimally-sized large elements can be

assembled specifically for every project.
In the process, the following points can
always be freely selected:
n type and size of the formlining
GB 80 GB 80 n formlining fixings
1.05 m

n panel widths and heights

n position of any height extension or

reduction
n girder length and spacing
n waler position, profile and length
1.48 m

n permissible fresh concrete pressure

n tie arrangement (horizontal, vertical)
n type of panel (straight, curved, offset)
1.48 m
1.48 m
11.50 m

RS 1000
1.51 m
1.48 m

VARIO GT 24 being used to

build a sewage treatment
facility with tapered walls.

RS 650
1.48 m
1.48 m

RS 450
0.45 m

3
General
The variable girder wall formwork system

The formwork is extended with the VARIO GT 24 formwork specially

adapted to the requirements with
VARIO Extension Splice 24. defined formlining joint formation
and tie point positioning.
Quickly and easily fitted through the
latticework of the GT 24, without having
to drill girders.
The flexurall rigid connection automati-
cally aligns the girders. The splice con-
sists of just two components which are
quickly connected using triple wingnuts.

4
VARIO GT 24 on the RCS rail VARIO panels, with concret-
climbing system for constructing ing scaffold and push-pull
the elevator and stairway shafts of props, are shifted as a
a highrise building. complete unit.
2.37 m
2.71 m

Soundproof sealing of the

tie points costs 50% less as
0.50 m

the top tie point is above the

concrete with waler spacing
of 2.37 m.

5
General
Complicated geometries
with standard system components

14 m high VARIO elements were arranged

polygonally in the curved areas. With large-sized
Fin-Ply Maxi plywood as formlining, an excellent
concrete surface quality could be achieved.
6
 11.05

VARIO GT 24 being used to construct a Even for this complicated layout,

circular tank. Timber wedges between over 90% of the formwork consists
girders and steel walers produce the of standard system components.
circular shape.

The stringent French safety standards for high-rise construc-

tion were taken into account during the formwork planning.
They included fine wire mesh panels for all safety handrails,
and end handrail swing frames for the outside climbing units,
in order to maximise the protection against falling, even
during climbing.

Multi-storey building in Paris with

VARIO GT 24 and CB 240 climbing
formwork systems.

7
General
The GT 24 lattice girder

As the main component in slab and wall Therefore, successful contractors use
formwork, the formwork girder signifi- the GT 24 lattice girder from PERI:
cantly determines the profitability of the n light and manageable for slabs

formwork. Thereby, it is not the initial n strong for wall formwork

investment costs but the durability and n cost-effective for customized form-

handling costs which are the decisive work solutions

factors.

The GT 24 from PERI offers:

n long service life
n shorter forming times

More information is available in the

GT 24 brochure.

Designed by timber specialists to

ensure a long service life
The patented girder nodes with mini-finger The GT 24 in
VT 20 GT 24 Diff.%
joints has virtully no “water cavities” comparison
which could trap moisture. The latticework
Permissible
design ensures excellent air circulation 22 kN 28 kN* + 27%
reaction force
even when the girders are stacked.
Permissible
bending moment 5 kNm 7 kNm* + 40%

Flexural stiffness 460 kNm2 887 kNm2 + 86%

Weight 5.3 kg/m 5.9 kg/m ±0%

* When supported at the nodes.

8
High load-bearing capacity with 6 x 8 cm thick chord
low weight For easy screwing and nailing. The girder
Perm. Q on the chord is prevented from splitting as the
compression struts QD = 14 kN full depth of the chord is finger-jointed
Perm. bending moment M = 7 kNm to the struts and tied at each girder
ly = 8.064 cm4 connection.

Steel end caps with through-rivets PERI Design Tables are available for
n Robust end protection slab and wall formwork operations.
n Prevents end being sawn off The girder is monitored according to
accidentally the requirements of DIN EN 13377.
n Can be used to replace the rubbing

board on VARIO panels if required

Mark of conformity
Year of manufacture
Day of production

Length in cm (rounded off)

The GT 24 lattice girder –

the girder that reduces
your shuttering costs!

9
General
The standard system components
of a VARIO GT 24 panel

The GT 24 formwork girder Cross-section

forms the main element of the VARIO
GT 24 wall formwork. Available in 80 mm
lengths from 90 cm to 17.80 m, in 30 cm
increments.

60 mm
240 mm
296
mm

163
mm 28

296
mm

311
mm

Steel Waler SRZ / SRU

Available in standard lengths as well
as any special sizes and forms. Profile
cross-sections of the U 100 to U 140
and others.

VARIO Steel Waler and

Internal Corner Waler IRZ
for corner panels.

10
Formlining
PERI formlining sheets come in a range
of sizes, thicknesses and grades to
­ensure that the most appropriate form-
lining is available to meet individual site
requirements.

Connecting components
Hook Strap HB 24
for connecting the GT 24 to SRZ and
SRU walers on the girder nodes.

Hook Strap Uni HBU

for connecting the GT 24 to SRZ and
SRU walers outside of the girder nodes.

TSS Torx Screw

for assembling the formlining.

11
Standard Applications
VARIO GT 24 standard panels

VARIO GT 24 standard elements

complete with platforms.

VARIO standard panels are pre-assem-

bled rentable formwork panels which
are fitted with 21 mm formlining.
The ready-to-use wall formwork is
assembled using tried and tested VARIO
system components. The panels are
supplied complete with lifting eyes and
rubbing board.

Permissible fresh concrete pressure:

60 kN/m² with tie spacings 55/140/55
or 50 kN/m² with tie spacings
62.5/125/62.5 according to DIN 18202,
Table 3, Line 7.

Integrated crane lifting

unit as well as top
cover board for protect-
ing against concrete
splashes.

Height increments 6.00 m

VARIO standard panels are available in
60 cm height increments. These panels 5.40 m
are simply extended for greater heights.

4.80 m
1.18

1.18

4.20 m

3.60 m
Base panel for extension
1.18
1.18

1.18

1.18

without top cover.

3.00 m
5.95
5.36

2.40 m
4.77

1.18
1.18

1.18
1.18

1.18
4.18
3.58
2.99

1.78
2.40

1.18

1.18

1.18

1.18
1.18

1.18
0.48
0.48

0.48

0.48
0.48
0.48

0.48

12
 VARIO standard panels for
9 m high tunnel walls.

Width increments VARIO standard internal corners

VARIO standard panels are The consistent leg length of 75 cm
available in 4 widths: allows this design to be used as a
left-hand or right-hand corner.
2.50 m
0.625 1.25 0.625

1.875 m
0.625 0.625 0.625

0.75
1.25 m
0.625 0.625
0.75

1.00 m

The VARIO standard internal

corner is available in 5
heights: 2.40, 3.00, 3.60,
4.80 and 6.00 m.

13
Standard Applications
Continuously adjustable panel connections

The rows of slots in the PERI steel

walers and couplings allow continu-
ous tightening of panel joints of even
roughly erected panels.

VARIO Coupling VKZ Important: Concrete Concrete

With the VARIO coupling, the panels are PERI steel walers and couplings have side Steel Waler SRZ side
simultaneously aligned. notches in the elongated holes. These
must always point towards the concrete
The multi-functional VARIO coupling side. As a result, the tolerances are
with the wedge: equal to zero and the panel joints are
n continuously tightens until joint is optimally aligned.
Concrete Concrete
grout-tight side VARIO Coupling side
n aligns panels Standard joint
n supports plywood fillers The continuous adjustment possibility
n extends the width of panels ensures extremely tight panel joints.
n fixes stopend formwork
n stabilises internal corners
n is continuously adjustable on both sides

Filler joint Internal corner Oblique joint

Any gap up to 1.25 m wide can be filled. The same VARIO coupling as for the Any angle can be shuttered with the
straight joint. articulated coupling.

Practical tip
Whether a wedge is locking or pulling is wedge locking wedge pulling
evident from its inclination:
Wedge tip points to the element joint
= wedge pulls
Wedge tip points away from the
­element joint
= wedge pushes

14
Neat and precise panel joints are
­always specifically required where
special architectural requirements
are placed on the concrete surface.

VARIO Coupling Concrete Finish VKS

With the VARIO Coupling VKS and the
Alignment Clamp VRS, it is easy and
quick to carry out.

The Coupling VKS allows offsets up to

5 mm to be compensated. At the same
time, the Coupling VKS can be used as
a “standard panel connection”.

Handling

n Centrally position the Coupling VKS on

the element joint in the steel waler. max. 5 mm element offset
n The smaller side of the trapezoidal-

shaped cut-outs point to the plywood.

Panel ➀ Panel ➁
(Fig. 1)

n Position the Wedges KZ in the same

way as with coupling VKZ. Fig. 1
n With element offsets, mount Align-

ment Clamp VRS on Panel ➀ which is

positioned more rear.
n Release pulling wedge on Panel ➁.
Panel ➀ Panel ➁
n Use counter wedge to slightly open

the formlining joint on Panel ➁. (Fig. 2)

Fig. 2
n Loosen pulling and counter wedges Counter Pulling wedge
wedge
on Panel ➀.
n Eliminate panel offset by tensioning

the Alignment Clamp VRS.

n Release pulling wedge on Panel ➁. Panel ➀ Panel ➁
n Tightly close joint on Panel ➁ with

counter wedge.
n Counter with pulling wedge on

Panel ➁. (Fig. 3) Fig. 3

Pulling wedge Counter Counter Pulling wedge
wedge wedge

15
Standard Applications
Fillers, stopend formwork and panel
width extensions units

Infill areas
VARIO GT 24 infill areas are shuttered
using the Couplings VKZ 147 and VKZ 211.

Coupling VKZ

Wedge K

Coupling Compres-
sion Plate KDP

Continuous infill area width

with Couplings VKZ.

Coupling VKZ 147

max. 0.48 m

Coupling VKZ 211

max. 1.20 m

16
Stopend Formwork
VARIO offers 2 possibilities for realising
stopend formwork: either the Coupling
VKZ or Bulkhead Tie is used.

Coupling VKZ
perm. tension force 50 kN.

Coupling VKZ 99, Item no. 013010

Spacer timber provided
by the contractor

Important:
Pulling wedge must be inserted in
the first hole.

Bulkhead Tie
perm. tension force 30 kN.

Bulkhead Tie, Item no. 013240

Complete stopend form-

work with bulkhead tie.
x

Panel width extensions

Panel width extensions are

also realised using VARIO with
system components.

17
Standard Applications
External corners, internal corners and shafts

Depending on the application, external

and internal corners can be formed in
various alternative ways.

n With VARIO Corner Panels

n With Cross Walers & Shaft Corners
n With Special Walers

VARIO Corner Panel

With this solution, especially for thin
walls and low utilisation, the fillers
consist of standard components.

External:
Panel w = 2.50 m
1 panel with extension.
Internal:
Corner Panel w = 1.25 / 0.50 m and
Panel w = 1.25 m with filler element.

Internal Corner External Corner Details of the VARIO Corner

VARIO Internal Corner with filler element. Ensure that it is tightened when the
correct angle is achieved. The continuous
adjustment possibility facilitates this
process. d
1
1.25
d 1

The waler on the panel width extension unit must

project 2 cm to enable firm pre-tensioning of the
corner. x 0.50

18
Shafts Details of the Quick
Release Corner 150 mm

21
In particular, small shafts can be realised

150 mm
extremely cost-effectively with custom-
ised Cross Walers and the quick-release
Shaft Corner SSE.

Practical tip
The shaft corner should be stripped at
the very latest one day after concreting.

Small lift shaft with Cross Walers

and Quick Release Corner SSE.

19
Standard Applications
Push-pull prop connector, crane lifting units

Push-Pull Prop Connector

Connecting the push-props and kickers
to the VARIO panel is carried out using
the Girder Headpiece or Wedge Head-
piece. Fixing to the slab takes place
using Base Plates and PERI Anchor
Bolts14/20 x 130.

The first panel must always be

secured with 2 push-pull props.

Connecting to the GT 24 girder by means of the Connecting to Steel Waler SRZ with the Wedge
Girder Headpiece, Item no. 028050. Headpiece, Item no. 028060 and Wedge K,
Item no. 024250.

20
Crane Lifting Unit
PERI VARIO offers three possibilities
for lifting panels with the crane.

1. The Crane Splice 24

as easily assembled and dismantled
lifting unit.

2. The Crane Lifting Eye 24, right / left

as permanently mounted lifting unit.

3. The Crane Lifting Unit 2 t / GT 24

for very heavy formwork units.

Important:
In general, two crane lifting units are
used per moving unit. The Instructions
for Use contain important information
and must be followed at all times.

Kranlasche 24
Art.-Nr. 070760

Originalbetriebsanleitung

Ausgabe 01 | 2013
Instructions for Use
for the Crane Splice 24.

Customized,
ready-to-use
VARIO GT 24 element.

Instructions for Use

for the Crane Lifting
Unit 2t/GT 24.

Crane Splice 24 Crane Lifting Eye 24, right/left

Permissible load-bearing capacity 700 kg Permissible load-bearing capacity 700 kg
with a crane sling angle of max. 15°. with a crane sling angle of max. 15°.

21
Standard Applications
Working and Concreting Scaffold

Scaffold Bracket GB 80
The Scaffold Bracket GB 80 is used for
the assembly of an 80 cm wide working
scaffold. Scaffold components supplied
by the contractor must comply with lo-
cal valid safety regulations (for Germany
DIN 4420). Timber components must
conform at least to S10 or MS10 clas-
sification according to DIN 4074 as well
as being clearly marked (BGR 169).
Cross-section of guardrail boards:
3 cm x 15 cm.
Secure planking and guardrails with nails
or screws.

A correctly assembled
concreting platform
complete with PERI
End Guardrail Frame 55,
Item no. 065066.

PERI Scaffold Bracket GB 80,

perm. working load 1.5 kN/m²,
max. width of influence 1.25 m.

Several working platform

levels are required at
great heights.

22
 VARIO Platform System
Platform Guardrail 80
Pre-assembled concreting/working
VARIO Platform 100/250 platforms in different widths.
with Hatch Complete with guardrails, end hand-
rail frame, push-pull prop connections
and crane eye. With or without access
Platform Strut 246 hatch.
Ladder 240–270

VARIO
Integrated Platform
Crane Eye
RS 650

RS 300
3.00 m

Platform Strut 167

Base Plate RS 210-1400

RS 450 Platform Connector

Ready-to-use VARIO standard panel

h = 5.40 m with 2 concreting plat-
forms, ladder and push-pull props.

23
Standard Applications
Panel extensions

Heights up to 8.00 m
The standard method of extension is
to use the VARIO Extension Splice 24.

The flexurally stiff connection also au- Extensions up to 8.00 m

tomatically aligns the panels. The splice 8 x Extension Splices 24 for a 2.50 m
consists of only two components and element width.
is connected in no time with two quick
action wingnuts.

Static values for the Extension

Splice 24
M perm. = 1.73 kNm
Q perm. = 0 kN
or
M perm. = 0 kNm
Q perm. = 5 kN

Extensions up to 5.00 m
4 x Extension Splices 24 for a 2.50 m
element width.

60 cm high timber extension simply realised with

the Extension Splice 24.

8.00 m
min. 0.46 min. 0.46
5.00 m

Assembly of the Extension Splice 24 takes place

through the lattice work of the GT 24 without having
to drill the girders.

24
 11.00 m high bridge abutment with
butted girders and additional overlap-
ping girders for stiffening.

Heights up to 9.80 m Heights up to

0.78
with overlapping girders.
11.90 m
with additional girders.

1.18
0.16

4.14

1.18
0.89

5.95
1.18

1.18
0.16
3.85

1.18

1.18
1.18
5.95

11.90
3.88
1.18

1.22
1.22
0.76

9.80
2.10

2.07
1.18

1.18

1.18

1.18
0.16

0.13
1.18

1.18
5.95
5.95

1.18

1.18
1.18

1.18

For more information on extensions,

see PERI Design Tables or VARIO GT 24
0.46
0.46

assembly instructions.

25
Special Applications
Architectural concrete | Perfect concrete surfaces
with VARIO

Achieving a first-class architectural

concrete finish is primarily a question of
selecting the most suitable formwork
and formlining. Other factors such as
the accuracy of the formwork assembly,
shuttering work, concrete release agent,
concrete and its placing all significantly
influence the result. Through the free
choice of girder lengths and spacings,
tie positions and formlining, the VARIO
GT 24 girder wall formwork offers the
highest possible degree of flexibility for
the realisation of architectural concrete
structures.

Attractive looking concrete finish

with rough vertical board finish.

43.50 m high tower with

architectural concrete with
a board finish for an indus-
trial plant.

26
 Church steeple in Feldmo-
ching near Munich. VARIO
GT 24 on KGF 240 climbing
formwork.

Consecretion Hall, Neubiberg,

Exemplary fairfaced concrete with Germany. VARIO with an
rough horizontal board finish. orderly tie pattern. Formlining
screwed on from the rear.

Perfect architectural concrete finish with horizontal and vertical panicular pattern.

27
Special Applications
Architectural concrete | Perfect concrete surfaces
with VARIO

Due to the freely configurable waler and

tie spacings, numerous possibilities for
realising neat joint and tie arrangements
can be executed.

An orderly pattern of ties spaced

at 0.75 x 1.18 m and smooth,
architectural concrete are the result
(Secondary School in Kletow).

2.50 x 3.60 m panel 2.50 x 3.60 m panel 3.00 x 3.90 m panel

with tie spacings of 1.25 x 1.18 m. with tie spacings of 0.88 x 1.78 m. Architectural concrete with an orderly
2 ties horizontally, 3 ties vertically. 3 ties horizontally, 2 ties vertically. pattern of joints and tie spacings of
0.75 x 1.18 m. 4 ties horizontally,
3 ties vertically.

3.90 m
3.60 m
3.60 m

0m
m m 3.0
0 0
2.5 2.5

28
The rough surface finish ensures that
the massive tunnel portals blend into
the volcanic rock landscape. The unusual
washboard structure was created by
using extra battens on the formlining.

Portal of a tunnel structure

on Hawaii, shuttered with
VARIO GT 24 on KGF 240
climbing scaffold.

Forming boards provided by

the contractor

High-quality architectural concrete

with vertical board finish.
The panels were pre-assembled at
PERI’s Weissenhorn factory.

The BAB 4 motorway bridge

over the Triebischbach valley
was constructed with 49 m
high circular piers featuring
trumpet-shaped pier heads.

29
Special Applications
Bridge construction | VARIO on climbing scaffold
and working platforms
Further information:
Climbing Scaffold CB
product brochure.

Type-tested safety with KGF 240,

KG 180 and CB 240, CB 160 systems.

The KGF 240 and CB 240 carriages allow

the formwork to be moved 0.75 m on the
platform without a crane. The formwork
is moved together with the scaffold ver-
tically in one crane lift. This saves time.

The KGF 240 and CB 240 provide a high

level of safety due to the obstruction-free
surface of the platform. The brackets
are positioned below the platform which
means there are no tripping hazards.

The platform lining can be pre-assembled

and can be used immediately when
moving from one site to the next. This
results in considerable assembly time
savings.

0.75 m

CB 240, the triangular

bracket for problem-free
working in front of and
behind the formwork.

30
 Further information:
Klettergerüste
KGF 240 und KG 180
Climbing Scaffold KG
product brochure.

1.18
0.80
1.18

6.80

Motorway viaduct in France.

Sophisticated pier geometry with
an extraordinary concrete finish.
Formed with VARIO GT 24 and
SKS climbing brackets.

On ASG 160 On Folding Platform FB 180 Further information:

Folding Platform FB 180
product brochure.
max. h = 5.40 m

max. h = 5.40 m

ASG 160 FB 180

31
Special Applications
Bridge construction | Abutments and piers

Bridge over the Danube,

BAB 8 motorway near Leipheim.

Section A-A Ground plan

A
1.00 m 9.10 m

GB 80

A
m

RSS III
6.09
5.98 m

9.25 m

32
 Bridge over the Danube,
BAB 8 motorway near
Leipheim.

Abutment and bridge pier with Sides of hollow piers on the banks of
VARIO GT 24. Crossing structure for the river, climbed with VARIO GT 24 on
the suburban railway line to the new PERI KG 240 climbing scaffold. Adapting
Munich Airport. to the arch-shaped ends was achieved
with VARIO standard components and
forming boards.

Example of a bridge pier tapered

towards the top.

View of the longitudinal side Section

5.40

3.05 2.75 3.05

33
Special Applications
Water-retaining structures

Single-sided forming
without formwork ties
When constructing locks, dams, cooling
towers and walls requiring single-sided
shuttering,VARIO GT 24 is frequently
used with KG and CB, or SKS, climbing
scaffold systems.

Magdeburg Waterway Intersection.

The intersection for three transort routes:
rail – road – waterway. As part of this
major transportation project, a number
of key structures had to be realised. The
photo shows the Rothensee lock facility.
It was formed with VARIO GT 24 on KG V-Strongback SKS
climbing scaffold and single-sided SKS
climbing scaffold. Compression Brace SKS

Bracket SKSF 240

Section VARIO GT 24
on single-sided SKSF 240
climbing scaffold.

34
 Front of the weir pier. VARIO in combina-
tion with GRV circular formwork system
on KGF 240 climbing scaffold.

VARIO GT 24 –
tied formwork

Section VARIO GT 24,

tied girder wall formwork on KGF 240
climbing scaffold.

GB 80

Bracket
KGF 240

Finishing Platform
KGF 240

Power station on the River Isar near the town of Rear side of the weir pier. The VARIO
GT 24 could be easily adapted to suit
Plattling-Pielwachs. Pier formwork with VARIO the inclined rear wall requirements.
GT 24 in combination with GRV circular form-
work. The concrete surface was realised in the
form of architectural concrete with a vertical
board finish. PERI VARIO GT 24’s versatility
and easy adaptability makes it a particularly
cost-effective shuttering system in this area.

35
Special Applications
Water-retaining structures | Circular structures
with VARIO

VARIO GT 24 – for shuttering

circular structures
The VARIO articulated couplings connect
the straight steel walers in a polygonal
arrangement. It can be moved continu-
ously to the right or to the left via the
wedges. This results in a flush and neat
panel joint.

In general, two design versions is

standard.

Silo, h = 72 m, Ø = 20 m for power

station in Oppeln, Poland. Shuttered
with circular VARIO girder formwork
on KGF climbing scaffold.

More information on
PERI circular formwork:
RUNDFLEX and GRV
product brochures.

36
 Steel Waler SRZ Special Length

Timber wedge Steel Waler SRZ 245

Version 1 The haunched transition to the ground slab was pre-

assembled with the VARIO wall formwork panels to
Spacer timber inserted between form a single unit for lifting.
GT 24 girders and SRZ steel walers.

Version 2 7.50 m hight circular formwork with segment profile

timbers on the GT 24 girders.
Segment profile timbers between the
formlining and girders.

37
Special Applications
Single-sided walls | With VARIO and Brace Frame SB

For concreting against rock faces,

existing walls or sheet piling, VARIO
GT 24 with SB Brace Frames is used.

PERI brace frames

allow single-sided concreting up to a
max. height of 8.75 m (see PERI Design
Tables).

PERI Brace Frames SB-A0, A, B, C

are sized for loading on a lorry or in a
container.

PERI brace frames

can be connected to all PERI wall form-
work systems with standard system
components.

Max. concreting height of 8.75 m, Brace Frame

SB-A0, A, B and C with VARIO GT 24
wall formwork.

The PERI V-Tie Holder The advantages of the anchoring system

For easy and accurate installation of with the Leading Anchor Coupler and
anchors when using brace frames. V-Tie Holder are:
The V-Tie Holder and the Leading An- n less on-site material requirements The tension forces arising at the
chor Coupler allow accurate assembly n no need to cut the tie rods to size brace frame’s anchor point determine
of the Tension Anchor under 45°. n tie rods are recoverable the choice of anchor system.

m
35 c

Anchor system is easily fixed to the The Leading Anchor Coupler is removed Example: DW 20 anchor system
reinforcement with wire and pliers. using the Single-Ended Spanner SW 70. Perm. tension force according to
DIN 18216 2 x 150 kN = 300 kN.

38
 When using PERI brace frames, Instructions and information
regarding the use: PERI Brace
the following must be taken into Frame SB product brochure.
­consideration:

1. The structural members (e.g. founda-

tions or ground slabs) must be able
to carry the tension and compression
forces arising. Check the design of the SB-C
members and position of the anchors
when planning.
2. The “other side” of the single-sided
formwork (existing walls, planking, rocks
etc.) must obviously be able to with-
stand the fresh concrete pressure acting
upon it.
3. DW tie rods installed for anchoring
purposes must not be welded or bent. Example:
We recommend the use of PERI V-Tie VARIO GT 24 h = 8.75 m.
Holders.

The following connecting parts are re- SB-B

8.75 m

quired for connecting VARIO GT 24 to

Brace Frames SB-A0, A, B and C:

Waler Connector Wedge K, galv.

SB-A, B, C Item no.: 024250
Item no.: 025760

SB-A

SB-A0

39
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Girders GT 24 L
075100   5.300 Girder GT 24, l = 0.90 m 918
075120   7.100 Girder GT 24, l = 1.20 m
1214
075150   8.900 Girder GT 24, l = 1.50 m
1510
075180  10.600 Girder GT 24, l = 1.80 m
1806
075210  12.400 Girder GT 24, l = 2.10 m
2102
075240  14.200 Girder GT 24, l = 2.40 m
2398
075270  15.900 Girder GT 24, l = 2.70 m
2694
075300  17.700 Girder GT 24, l = 3.00 m
2990
075330  19.500 Girder GT 24, l = 3.30 m
3286
075360  21.200 Girder GT 24, l = 3.60 m
3582
075390  23.000 Girder GT 24, l = 3.90 m
3878
075420  24.800 Girder GT 24, l = 4.20 m
4174
075450  26.600 Girder GT 24, l = 4.50 m
4470
075480  28.300 Girder GT 24, l = 4.80 m
4766
075510  30.100 Girder GT 24, l = 5.10 m
5062
075540  31.900 Girder GT 24, l = 5.40 m
5358
075570  33.600 Girder GT 24, l = 5.70 m
5654
075600  35.400 Girder GT 24, l = 6.00 m
5950

311 296

163 296
60
120
240
60

28
80

40
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
VARIO Standard Panels S b = 2.50 m Note
101241 320.000 VARIO Standard Panel S 250 x 240 Panel h = 2.40 m, without Cover Board and Crane
101242 381.000 VARIO Standard Panel S 250 x 300 Eyes 24.
101243 489.000 VARIO Standard Panel S 250 x 360 Permissible load-bearing point capacity 700 kg
101244 597.000 VARIO Standard Panel S 250 x 420 with crane sling angle ≤ 15°.
101245 648.000 VARIO Standard Panel S 250 x 480
101246 756.000 VARIO Standard Panel S 250 x 540
101247 805.000 VARIO Standard Panel S 250 x 600
Pre-assembled panels with 21 mm plywood. With
Slip Boards, Cover Board and Crane Eyes 24.

. .
2500
297 350 350 350 350 350 297 78 600

21
240
540

100
625 1250 625

480

1184

1184
420

360

1184

1184

1184
1184

300

5950
5358
240
4766
1184

1184

1184

1184
1184

4174
3582
2990
1776
2398
1184

1184

1184

1184

1184
1184

459

459

459
459

459

459

459

101311   6.170 Protection Board 250

As top covering for VARIO GT 24 standard panels.
248

2500 21

41
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
VARIO Standard Panels S b = 1.875 m Note
101248 237.000 VARIO Standard Panel S 187.5 x 240 Panel h = 2.40 m, without Cover Board and Crane
101249 284.000 VARIO Standard Panel S 187.5 x 300 Eyes 24.
101250 364.000 VARIO Standard Panel S 187.5 x 360 Permissible load-bearing point capacity 700 kg
101251 444.000 VARIO Standard Panel S 187.5 x 420 with crane sling angle ≤ 15°.
101252 481.000 VARIO Standard Panel S 187.5 x 480
101253 562.000 VARIO Standard Panel S 187.5 x 540
101254 598.000 VARIO Standard Panel S 187.5 x 600
Pre-assembled panels with 21 mm plywood. With
Slip Boards, Cover Board and Crane Eyes 24.

. .
1875
319,5 360 360 360 319,5 78 600

21
240
540
625 625 625 100

480

1184

1184
420

360
1184

1184

1184

1184
300

5950
5358

240
4766
1184

1184

1184

1184

1184
4174
3582
2990
1776
2398
1184

1184

1184

1184

1184

1184
459

459

459

459

459

459

459

101318   4.470 Protection Board 187.5

As top covering for VARIO GT 24 standard panels.
248

1875 21

42
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
VARIO Standard Panels S b = 1.25 m Note
101255 173.000 VARIO Standard Panel S 125 x 240 Panel h = 2.40 m, without Cover Board and Crane
101256 209.000 VARIO Standard Panel S 125 x 300 Eyes 24.
101257 267.000 VARIO Standard Panel S 125 x 360 Permissible load-bearing point capacity 700 kg
101258 324.000 VARIO Standard Panel S 125 x 420 with crane sling angle ≤ 15°.
101259 352.000 VARIO Standard Panel S 125 x 480
101260 410.000 VARIO Standard Panel S 125 x 540
101261 438.000 VARIO Standard Panel S 125 x 600
Pre-assembled panels with 21 mm plywood. With
Slip Boards, Cover Board and Crane Eyes 24.

. .
1248
297 180 320 297 77 600

21
240
100
540
624 624

480

1184

1184
420

360
1184

1184

1184

1184
300

5950
5358
240
4766
1184

1184

1184

1184

1184
4174
3582
2990
1776
2398
1184

1184

1184

1184

1184

1184
459

459

459

459

459

459

459

101319   2.860 Protection Board 125

As top covering for VARIO GT 24 standard panels.
248

1248 21

43
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
VARIO Standard Panels S b = 1.00 m Note
101411 138.000 VARIO Standard Panel S 100 x 240 Panel h = 2.40 m, without Cover Board and Crane
101410 168.000 VARIO Standard Panel S 100 x 300 Eyes 24.
101409 214.000 VARIO Standard Panel S 100 x 360 Permissible load-bearing point capacity 700 kg
101408 260.000 VARIO Standard Panel S 100 x 420 with crane sling angle ≤ 15°.
101407 283.000 VARIO Standard Panel S 100 x 480
101406 329.000 VARIO Standard Panel S 100 x 540
101405 351.000 VARIO Standard Panel S 100 x 600
Pre-assembled panels with 21 mm plywood. With
Slip Boards, Cover Board and Crane Eyes 24.

. .
998
297 250 297 77 600
21
240

540
100

480

1184

1184
420

360
1184

1184

1184

1184
300

5950
5358

240
4766
1184

1184

1184

1184

1184
4174
3582
2990
1776
2398
1184

1184

1184

1184

1184

1184
459

459

459

459

459

459

459

101404   2.230 Protection Board 100

As top covering for VARIO GT 24 standard panels.
248

998 21

44
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
VARIO Internal Edges S 75/75 Note
101471 214.000 VARIO Internal Edge S 75/75 x 240 Panel h = 2.40 m, without Cover Board and Crane
101470 254.000 VARIO Internal Edge S 75/75 x 300 Eyes 24.
101469 328.000 VARIO Internal Edge S 75/75 x 360 Permissible load-bearing point capacity 700 kg
101467 434.000 VARIO Internal Edge S 75/75 x 480 with crane sling angle ≤ 15°.
101465 539.000 VARIO Internal Edge S 75/75 x 600
Pre-assembled panels with 21 mm plywood. With
Slip Boards, Cover Board and Crane Eyes 24.

. .
750
310 301 78 600

21
240

750
100
262
76

480

1184
360

1184

1184
300

5950
240
4766
1184

1184

1184
3582
2990
1776
2398
1184

1184

1184

1184
459
459

459

459

459

101464   4.730 Protection Board IE 75/75

As top covering for VARIO GT 24 standard panels.
750
400

750 21

45
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Steel Walers SRZ U100 L
010600  19.800 Steel Waler SRZ U100, l = 0.95 m 950
010030  24.900 Steel Waler SRZ U100, l = 1.20 m 1200
010610  30.400 Steel Waler SRZ U100, l = 1.45 m 1450
010060  38.300 Steel Waler SRZ U100, l = 1.825 m 1825
010070  40.900 Steel Waler SRZ U100, l = 1.95 m 1950
010050  51.600 Steel Waler SRZ U100, l = 2.45 m 2450
010120  61.500 Steel Waler SRZ U100, l = 2.95 m 2950
Steel waler for VARIO GT 24 panels and special Note
applications. Special lengths and other profile sizes on request.
Technical Data
U100: Wy = 82.4 cm³, ly = 412 cm4.

93
30 170 135 205 25

20
53
40 X x 60

Ø6 Ø9

60
100

52
152

Steel Walers SRZ spec. length Technical Data

010080  22.000 Steel Waler SRZ U100 spec. length U100: Wy = 82.4 cm³, ly = 412 cm4.
010150  28.000 Steel Waler SRZ U120 spec. length U120: Wy = 121.4 cm³, ly = 728 cm4.
010090  33.000 Steel Waler SRZ U140 spec. length U140: Wy = 172.8 cm³, ly = 1210 cm4.
010350   0.000 Additional Row of SRZ Slots

60 52 60
. 50 52 50
55 52 55
140
120
100

U100 U120 U140

710001   0.370 End Plate SRZ

For Steel waler SRZ with special lengths.

150 5
Ø6,3 Ø9
60

46
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Steel Walers VSRZ Note
010440  32.100 Steel Waler VSRZ-24 U100, l = 1.20/12 Special lengths and other profile sizes on request.
010420  58.800 Steel Waler VSRZ-24 U100, l = 2.45/12 Technical Data
010490   0.000 Welding Unit for VSRZ/12 Wy = 82.4 cm³, ly = 412 cm4.
010500   0.000 Welding Unit for VSRZ
Steel waler for VARIO GT 24 corner panels and
special applications.

93
236

236
Ø9

120
1200 / 2450 52

VARIO Walers VSRZ, spec. lenght Note

010240  22.000 VARIO Waler U100 VSRZ, spec. lenght When ordering, state dimensions L1.
010430  28.000 VARIO Waler U120 VSRZ, spec. lenght Technical Data
010250  33.000 VARIO Waler U140 VSRZ, spec. lenght U100: Wy = 82.4 cm³, ly = 412 cm4.
U120: Wy = 121.4 cm³, ly = 728 cm4.
U140: Wy = 172.8 cm³, ly = 1210 cm4.

93
. 236

236
Ø9
120

L1 52

010200  42.300 Internal Corner Waler IRZ 75/75 Technical Data

Steel waler for VARIO GT 24 corner panel Wy = 82.4 cm³, ly = 412 cm4.
75 x 75 cm. Allows easy striking.

10 715 152
70 301 38 130

Ø9
236
100
727

52
300

236
38

47
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Cross Walers KRZ spec. length Note
010180  22.000 Cross Waler KRZ U100, spec. length When ordering, state dimensions L1 and L2.
010270  28.000 Cross Waler KRZ U120, spec. length Technical Data
010190  33.000 Cross Waler KRZ U140, spec. length U100: Wy = 82.4 cm³, ly = 412 cm4.
010400   0.000 Welding Unit for KRZ U120: Wy = 121.4 cm³, ly = 728 cm4.
Steel waler for VARIO GT 24 panels for narrow lift U140: Wy = 172.8 cm³, ly = 1210 cm4.
shafts.

93

L2
236
93

236 52
L1

Column Walers SSRZ-24 U-100 Note

012150  38.700 Column Waler SSRZ-24 U-100, l = 0.97/0.85 m Special lengths and other profile sizes available on
012160  45.700 Column Waler SSRZ-24 U-100, l = 1.13/1.01 m request.
For continuously adjustable column cross-sections
24 x 24 cm up to 48 x 60 cm or 40 x 40 cm up to
64 x 76 cm. Profile U100.

852 / 1012
175

972 / 1132 52

012050  31.300 Column VARIO Waler SVRZ U-100, l = 1.20 m Note

For continuously adjustable column cross-sections Special lengths and other profile sizes available on
up to 80 x 120 cm in connection with Steel Waler request.
SRU. Profile U100.
300
375

Ø21

300 52
1274 152

Accessories
103871  24.200 Steel Waler Universal SRU U120, l = 0.97 m
103874  30.900 Steel Waler Universal SRU U120, l = 1.22 m
103877  38.100 Steel Waler Universal SRU U120, l = 1.47 m
103886  44.700 Steel Waler Universal SRU U120, l = 1.72 m
037160   0.736 Bolt Ø 20 x 205, galv.
024240   0.805 Wedge KZ, galv.

48
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Steel Walers Universal SRU L
103868  18.100 Steel Waler Universal SRU U120, l = 0.72 m 722
103871  24.200 Steel Waler Universal SRU U120, l = 0.97 m 972
103874  30.900 Steel Waler Universal SRU U120, l = 1.22 m 1222
103877  38.100 Steel Waler Universal SRU U120, l = 1.47 m 1472
103886  44.700 Steel Waler Universal SRU U120, l = 1.72 m 1722
103889  52.000 Steel Waler Universal SRU U120, l = 1.97 m 1972
103898  58.600 Steel Waler Universal SRU U120, l = 2.22 m 2222
103892  65.600 Steel Waler Universal SRU U120, l = 2.47 m 2472
103929  72.000 Steel Waler Universal SRU U120, l = 2.72 m 2722
103903  81.000 Steel Waler Universal SRU U120, l = 2.97 m 2972
103906  92.600 Steel Waler Universal SRU U120, l = 3.47 m 3472
103915 106.000 Steel Waler Universal SRU U120, l = 3.97 m 3972
103918 119.000 Steel Waler Universal SRU U120, l = 4.47 m 4472
103922 135.000 Steel Waler Universal SRU U120, l = 4.97 m 4972
103925 146.000 Steel Waler Universal SRU U120, l = 5.47 m 5472
103928 159.000 Steel Waler Universal SRU U120, l = 5.97 m 5972
Universal Steel Waler Profile U120 used as waling Note
for girder wall formwork and for diverse special Permissible load: see PERI Design Tables.
applications. With adjustable spacers. Technical Data
U120: Wy = 121.4 cm³, ly = 728 cm4.

51 N X 60

37,5 52,5
Ø21
48,5 N x 125

198,5 3 x 65

19
17

112
36 70 X

52
120

162

49
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
103943 157.000 Steel Waler Universal SRU U140, l = 4.97 m Note
Universal steel waler profile U140 used as waling Permissible load: see PERI Design Tables.
for girder wall formwork and for diverse special Technical Data
applications. With adjustable spacers. U140: Wy = 172.8 cm³, ly = 1210 cm4.

4972

51 N x 60

37,5 52,5
48,5 N x 125 21

198,5 3 x 65

19
17

112
36 70 X

52

140
172

104027   7.610 Extension VARIO 24 U120 Complete with

For assembly on Steel Waler SRU. 4 pc. 710252 Bolt ISO 4017 M16 x 50-8.8, galv.
4 pc. 104024 Nut ISO 7040 M16-8, galv.
4 pc. 710880 Washer DIN 434 18, galv.
Technical Data
U120: Wy = 121.4 cm³, Iy = 728 cm4.
53
120
65

52

M 16
236 162

024070   0.691 Hook Strap HB 24-100/120, galv.

For fixing GT 24 Girders to Steel Walers SRZ, SRU
and BR: U100 – U120.

M 8x70

152 (U 100) 82
162 (U 120)

50
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
024080   0.735 Hook Strap HB 24-140/160, galv.
For fixing GT 24 Girders to Steel Walers SRZ, SRU
and BR: U140 – U160.

M 8x70

172 (U 140) 82
182 (U 160)

Accessories Hook Straps HB

071218   0.000 Screw Change HB, incl. Screws
126228   0.030 F.H. Bolt DIN 603 M8 x 70 MU, galv.
710240   0.050 F.H. Bolt DIN 603 M8 x 100 MU, galv.
024090   0.005 Nut ISO 4032 M8-8, galv.

024600   0.907 Girder Claw HB

For mounting the GT 24 Edge Girder on the Steel
Waler SRZ and SRU Profile U100 – U120.

M 8x100

154
152 (U 100)
152
162 (U 120)

024630   0.742 Fix Strap U100 – U120, galv.

For fixing the GT 24 Girder in the VARIO Corner.

M 8x100

152 (U 100) 113

162 (U 120)

024640   0.923 Quick Str. Hook Strap 24-100/140, galv. Note

For fixing GT 24 Girders to Steel Waler SRZ, SRU, Girders fixed in position with the quick strap must
Profile U100 – U140 outside of the girder nodes. be specially screwed to the formlining when using
crane lifting gears.
99

90 56

51
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Hook Straps Uni HBU Note
104931   0.865 Hook Strap Uni HBU 20-24 The girders can be mounted at right-angles or
103845   0.893 Hook Strap Uni HBU 24-28 diagonally to the steel walers and also outside of
For fixing GT 24 Girders or VT 20 Girders to Steel the nodes.
Walers SRZ and SRU Profiles U100 – U140.

max 240
max 280
82

min 200
min 240
152 (U 100)
162 (U 120)
172 (U 140)

Accessories
024540   0.005 TSS-Torx 6 x 40, galv.

Hook Straps Uni Double HBUD Note

104930   0.887 Hook Strap Uni Double HBUD 20-24 The girders can be mounted at right-angles or dia-
104096   0.912 Hook Strap Uni Double HBUD 24-28 gonally to the steel walers and also outside of the
For fixing two GT 24 Girders or VT 20 Girders to nodes.
SRZ Steel Walers and SRU Profiles U100 – U140.

max 240
max 280
160

min 200
min 240

152 (U 100)
162 (U 120)
172 (U 140)

Accessories Hook Straps HBU, HBUD

071219   0.000 Screw Change HBU, HBUD
104929   0.050 Bolt ISO 4014 M8 x 150-8.8, galv.
107185   0.060 Bolt ISO 4014 M8 x 180-8.8, galv.
103518   0.060 Bolt ISO 4014 M8 x 190-8.8, galv.
103844   0.013 Sleeve HBU/HBUD, galv.

024860   0.616 Hook Strap HB 24 QB 150, galv.

For fixing GT 24 Girders independent from girder
node and timber beams to Steel Walers SRZ, SRU
and BR: U100 – U120.

M 8x70

152 (U 100) 130

162 (U 120)

52
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
TSS-Torxs, galv.
024470   0.008 TSS-Torx 6 x 60, galv.
024690   0.008 TSS-Torx 6 x 80, galv.
For Torx Blade TX 30. Self-drilling.

60 / 80

TX 30

110272   0.006 TSS-Torx 6 x 60, ZKS, galv.

For Torx Blade TX 30. Self-drilling.

60

TX 30

Lag Screws DIN 571, galv.

024270   0.023 Lag Screw DIN 571 8 x 60, galv.
024260   0.027 Lag Screw DIN 571 8 x 80, galv.

60 / 80
SW 13

128013   2.100 Cordless Combi Drill ABS 18 Note

Universal power screwdriver with continuous elec- Follow Instructions for Use!
tronic speed control and clockwise/anti-clockwise
rotation. Including 2 batteries and a battery char-
ger in case.

Accessories
072220   0.400 Bit Holder for SCU 7-9
072140   0.005 Bit Point TX 30
128016   0.760 Replacement Battery Li-Ion 18V

Accessories Cordless Combi Drill ABS 18

072220   0.400 Bit Holder for SCU 7-9
072140   0.005 Bit Point TX 30

53
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
128011   1.800 Cordless Impact Screwdriver ASCD 18-W2 Note
Light weight electric power wrench for moment- Follow Instructions for Use!
free working, with clockwise/anti-clockwise rotati-
on and 1/2 square drive. Including 2 batteries and
a battery charger in case.

128016   0.760 Replacement Battery Li-Ion 18V Note

For use with Cordless Combi Drill ABS 18 and Follow Instructions for Use!
Cordless Impact Screwdriver ASCD 18-W2. Technical Data
Capacity 4 Ah.

072180   0.560 Ratchet Wrench 1/2"

300

030370   1.660 Wingnut Pivot Plate DW 15, galv. Note

For anchoring with Tie Rod DW 15 and B 15. With Wrench size SW 27.
pivoting captive nut. Maximum angle of tilting 8°. Technical Data
Permissible load 90 kN.

117 72

Ø10

54
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Tie Rod DW 15 Note
030030   1.440 Tie Rod DW 15, spec. length Non-weldable! Take official Approval into
030050   0.000 Cutting Cost Tie Rod DW 15, B 15 consideration!
Technical Data
Permissible tension force 90 kN.

DW 15

065027   0.359 Spacer Tube rough DR 22, l = 2.00 m

Plastic Spacer Tube for DW 15, B 15.

Ø 22
Ø 26
031050   1.780 Tie Rod Wrench 20, galv.
For easy handling of Tie Rod DW 20.

260 140 20

065036   0.002 Plug DR 22 Note

Plastic. Suitable for Spacer Tube DR 22. Delivery unit 1000 pieces.

17
Ø 23
Ø 22

065033   0.010 Cone DR 22 Note

Plastic. Suitable for Spacer Tube DR 22. Delivery unit 500 pieces.
Ø 46
Ø 21

15
32,5

55
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Couplings VKZ L
013010   9.000 Coupling VKZ 99 990
013020  13.300 Coupling VKZ 147 1470
013030  19.100 Coupling VKZ 211 2110
013080   9.000 Coupling VKZ spec. length
For connection of SRZ and SRU Steel Walers. Technical Data
Wy = 17.1 cm³, Iy = 68.3 cm4.

44
80
L

101395   7.110 Offset Coupling VVKZ 3/99

For connecting extended and non-extended VARIO
panels above the extension.

30
12
30
80
990

Corner Couplings EKZ

013140  11.900 Corner Coupling EKZ 95/43
013130  13.300 Corner Coupling EKZ 76/76
103938   8.850 Corner Coupling EKZ 47/43
013180   9.000 Corner Coupling EKZ spec. length
For continuously variable tight (tension and
compression) connection of SRZ and SRU Steel
Walers.
44
429 / 765

948 / 765
80

56
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
103850  24.700 Outside Corner Coupling AKZ 85/85
For providing tensile and compression-proof con-
nections of Steel Walers SRZ and SRU on external
corners.

44
120
335
845

845
343
Articulated Couplings GKZ
013220  11.500 Articulated Coupling GKZ 60/60
013210  14.400 Articulated Coupling GKZ 76/76
013230   9.000 Articulated Coupling GKZ spec. length
For continuously variable tight (tension and com-
pression) connection of SRZ and SRU Steel Walers
with oblique angles more than 48°.

44
640 / 790 483 / 690

80
600 / 760 600 / 760

102825   8.610 VARIO Coupling Concrete Finish VKS 99

For connecting VARIO GT 24 panels. Allows com-
pensation of up to max. 5 mm panel offsets.
44
80

990

Accessories
102945   2.070 VARIO Alignment Clamp VRS

57
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
103054  11.200 Articulated Coupling GKS 60/60 S
For connecting VARIO GT 24 panels. Allows com-
pensation of up to max. 5 mm panel offsets.

44
640 483

80
600 600

Accessories
102945   2.070 VARIO Alignment Clamp VRS

102945   2.070 VARIO Alignment Clamp VRS Complete with

In connection with Coupling VKS 99 or Articulated 1 pc. 030370 Wingnut Pivot Plate DW 15, galv.
Coupling GKS 60/60. For compensating maximum
5 mm element offset.

117
247

103737  10.800 Universal Coupling UK 70 Note

For a rigid connection of Steel Walers SRU and for Permissible load: see PERI Design Tables.
connecting Heavy-Duty Spindles SLS.

62,5 187,5 125 187,5 62,5 48

21 210

685 50

Accessories
104031   0.462 Fitting Pin Ø 21 x 120
018060   0.014 Cotter Pin 4/1, galv.

104031   0.462 Fitting Pin Ø 21 x 120

For different connections.

207
122
Ø6

Ø21

Accessories
018060   0.014 Cotter Pin 4/1, galv.

58
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
018060   0.014 Cotter Pin 4/1, galv.

Ø4

024210   2.180 Tie Yoke SKZ

For tensioning on external corners with Steel
Waler SRZ, SRU, U100 – U140 and VARIO
couplings.

146
Ø18
161 48

013240   2.100 Stopend Tie Technical Data

For assembling stopend formwork with VARIO Permissible tension force 30.0 kN.
GT 24.

390

8
DW 15

80

024240   0.805 Wedge KZ, galv.

For connecting panels with VARIO Couplings or Tie
Yoke SKZ.
47

254
20

59
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
024220   1.230 Coupling Compression Plate KDP
For mounting girders to VARIO Couplings in infill
areas.

120
12 107
90 128

024250   0.331 Wedge K, galv.

For Coupling Compression Plate KDP, Wedge Head
Piece SRZ/SRU and Waler Connector SB-A, B, C.

Ø8

35
208

20

8
031200   0.470 Chamfer Strip with Flange, l = 2.50 m

2500 15

15
20
Formwork Joints
030260   0.500 Formwork Joint 21/20, l = 2.50 m
101706   1.230 Formwork Joint 21/40, l = 3.00 m
Plastic profile strip for easier striking of shafts.

2500 / 3000 34/65

22

max 20
max 40

60
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Quick Release Corners SSE L
025200  32.200 Quick Release Corner SSE 1.0 m 1000
025210  70.000 Quick Release Corner SSE 2.0 m 2000
025220 105.000 Quick Release Corner SSE 3.0 m 3000
025230 140.000 Quick Release Corner SSE 4.0 m 4000
025240 180.000 Quick Release Corner SSE 5.0 m 5000
025250  35.000 Quick Release Corner SSE spec. length
For easier striking of shaft internal formwork. We Note
recommend removing the shaft corner immediate- Formlining size is 15 cm shorter than the
ly after concreting. dimension of the concrete.

150
235

235
027590   2.400 Hook Strap for SB-1, 2
For fixing Brace Frame SB-1 and SB-2 to Steel
Waler SRZ and SRU Profile U100 – U140.

SW 22
M 14

152 (U 100) 150

162 (U 120)
172 (U 140)

024480   7.040 Extension Splice 24-2 Complete with

For extending GT 24 girders and VARIO GT 24 2 pc. 030190 Three Wingnut DW 15, galv.
panels up to max. height of 8.00 m. Note
Permissible load: see PERI Design Tables.
28

626
850
121

61
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
070760   4.650 Crane Splice GT 24 Complete with
For transporting elements by crane with the 1 pc. 018050 Pin Ø 16 x 65/86, galv.
GT 24 girder. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Follow Instructions for Use!
Technical Data
Permissible load-bearing capacity 700 kg with
crane sling angle ≤ 15°.

635
117 25 30

Crane Eyes 24 Complete with

021990   2.780 Crane Eye 24, right 4 pc. 710138 Bolt ISO 4014 M10 x 110-8.8, galv.
021980   2.780 Crane Eye 24, left 4 pc. 780356 Nut ISO 7042 M10-8, galv.
For transporting elements by crane with the GT 24 4 pc. 710139 Washer R11 DIN 440, galv.
girder. Mounted securely to the element. Note
Illustration shows Crane Eye 24, left.
Follow Instructions for Use!
Technical Data
Permissible load-bearing capacity 700 kg with
crane sling angle ≤ 15°.
55
393
90 90

20 180

228 M 10x110

111238  19.800 Crane Hook 2 t / GT 24 Complete with

For transporting elements by crane with the GT 24 1 pc. 018060 Cotter Pin 4/1, galv.
Girder. Adjustable from 230 to 410 mm. 8 pc. 710138 Bolt ISO 4014 M10 x 110-8.8, galv.
8 pc. 780356 Nut ISO 7042 M10-8, galv.
Note
Follow Instructions for Use!
Technical Data
Permissible load-bearing capacity 2.0 t with crane
sling angle ≤ 30°.
448
80
160

min 230 max 410 230

660

62
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
027110  11.000 Scaffold Bracket GB 80 Technical Data
For assembly of a working and concreting scaffold Permissible load 150 kg/m2. Maximum width of
with GT 24 girder. influence 1.25 m.

120
65 35

460

1050
899
66 757

Ø7

85

600
180

Corner Scaffold Brackets EGB Note

027060  13.800 Corner Scaffold Bracket EGB 24 – 80, right Illustration shows Corner Scaffold Bracket EGB
027070  13.800 Corner Scaffold Bracket EGB 24 – 80, left 24 – 80 right.
For assembling a working scaffold to panels with Technical Data
GT 24 Girders. With securing bolts. Permissible load 150 kg/m2 with a maximum width
of influence 1.25 m.

120
35

460

1050
1274

600
85

9
72

Ø7

63
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
112159   2.120 Handrail Post Holder VARIO Complete with
For assembling a guardrail with GT 24 Girder. 1 pc. 024250 Wedge K, galv.
1 pc. 780800 Sleeve ISO 8752 8 x 20, galv.
Technical Data
Maximum width of influence 2.00 m.

70 45 45

8,51°

402

400
115 117

Accessories
116292   4.720 Guardrail Post HSGP-2

116292   4.720 Guardrail Post HSGP-2

As guardrail for different systems.

120
450
1050
1300

65 35

105985 156.000 Platform VARIO 100 x 250 with Hatch Complete with
Pre-assembled working platform for VARIO GT 24 2 pc. 100813 Platform Guardrail 80
panels. Technical Data
Permissible load 150 kg/m2.

2480
1165

1299

64
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
102415  98.800 Platform VARIO 100 x 125 with Hatch Technical Data
Pre-assembled working platform for VARIO GT 24 Permissible load 150 kg/m2.
panels.

1165
1230 1299

Accessories
100813   4.980 Platform Guardrail 80

105986 155.000 Platform VARIO 100 x 250 without Hatch Complete with
Pre-assembled working platform for VARIO GT 24 2 pc. 100813 Platform Guardrail 80
panels. Technical Data
Permissible load 150 kg/m2.

2480
1165

1299

65
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Platforms VARIO without Hatch Technical Data
102920 115.000 Platform VARIO 100 x 187.5 Permissible load 150 kg/m2.
103203  84.900 Platform VARIO 100 x 100
Pre-assembled working platform for VARIO GT 24
panels.

1165
1855 / 980 1299

Accessories
100813   4.980 Platform Guardrail 80

103932  36.300 End Platform VARIO Technical Data

Pre-assembled working platform for VARIO GT 24 Permissible load 150 kg/m2.
stopend formwork. 2 pieces per set of stopend
formwork and platform level.

986

1020 275

Accessories
103865  22.000 Guardrail for End Platform VARIO

103992  65.600 External Corner Platform VARIO Technical Data

Pre-assembled working platform for VARIO GT 24 Permissible load 150 kg/m2.
panels. Connecting platform with pivot-mounted
end handrail. For external corners from 80° to
100°.
1044
850

2125

66
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
103865  22.000 Guardrail for End Platform VARIO
For assembly on VARIO End Platform with wall
thicknesses up to 0.50 m. With foldable VARIO
Platform Handrail 80.

1290 140

1288
100813   4.980 Platform Guardrail 80 Complete with
End handrail for various platforms. Pivot-mounted. 2 pc. 102414 Bolt Ø 12 x 105 x 5 x 95-ST, galv.
2 pc. 018060 Cotter Pin 4/1, galv.

810

420
880

100541   4.020 Connector for Platform VARIO Complete with

For connecting the VARIO platforms and platform 1 pc. 027170 Pin Ø 16 x 42, galv.
struts to GT 24 girders. 1 pc. 018060 Cotter Pin 4/1, galv.
82

148
14
80

208 min 60 41
max 76

67
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
Platform Struts VARIO Complete with
101273   7.780 Platform Strut VARIO 167 2 pc. 018050 Pin Ø 16 x 65/86, galv.
101269  11.200 Platform Strut VARIO 246 2 pc. 018060 Cotter Pin 4/1, galv.
For assembling VARIO platforms. 2 pieces per
platform.

50
65 30 1576 / 2368
1726 / 2518

Platform Beams VARIO Note

105480  16.600 Platform Beam VARIO, left Illustration shows the VARIO Platform Beam, left.
105484  16.600 Platform Beam VARIO, right
For assembling VARIO GT 24 filler platforms with
bolted boarding.

269
1299

175
105823   9.310 Platform Bracket VARIO VBK 90 Complete with
For assembly of a working and concreting scaffold 1 pc. 106336 Bolt Ø 20 x 120, galv.
on elements with GT 24 girders. With safety pins 1 pc. 018060 Cotter Pin 4/1, galv.
and cotter pins. Technical Data
Permissible load 150 kg/m2 with a maximum
width of influence 1.25 m.

1042
68 890
744

180

Ø6

Ø7
85

Accessories
116292   4.720 Guardrail Post HSGP-2

68
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
107738  24.100 Ladder 240 – 360
Adjustable from 2.40 m to 3.60 m.

422
N x 300
min 2360 max 3710

111165   6.080 Ladder Connector VARIO, adjustable Complete with

For connecting ladders to Steel Walers SRZ and 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv.
SRU, Profile U100 – U120. 2 pc. 701763 Clamping Plate Fl 25 x 10 x 90

90
835

295
454

U100 / U120 min 0 max 111

051410  11.700 Ladder 180/6, galv. Complete with

As access for PERI Formwork Systems. 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv.
4 pc. 710381 Nut ISO 7042 M12-8, galv.

450
SW 19 5 x 298 = 1490 83
1960

103724  10.400 End Ladder 180/2, galv. Complete with

As access for PERI Formwork Systems. 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv.
4 pc. 710381 Nut ISO 7042 M12-8, galv.
450

298 1200
1885

69
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
051460   2.180 Ladder Base, galv.
As bottom ladder connection and for securing
ladders against sliding on the scaffold decks.

210
405 50

Ladder Safety Cages Complete with

104132  15.600 Ladder Safety Cage 75, galv. 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv.
051450  25.200 Ladder Safety Cage 150, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
Ladder safety cage for PERI Access Ladders.

710
SW 19

750 / 1500

704
103718   0.684 Ladder Hook, galv. Complete with
For adjusting the bottom ladder. 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv.
Always use in pairs. 2 pc. 710381 Nut ISO 7042 M12-8, galv.

SW 19
330

028050   4.550 Girder Headpiece GT 24, galv. Complete with

For connecting push-pull props and kicker braces 1 pc. 027170 Pin Ø 16 x 42, galv.
to GT 24 Girders 1 pc. 018060 Cotter Pin 4/1, galv.

145
14
40 min 40
170

70
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
028070   4.680 Girder Headpiece GT 24/A, galv. Complete with
For connecting push-pull props and kicker braces 1 pc. 027170 Pin Ø 16 x 42, galv.
to extended GT 24 Girders in the area of the 1 pc. 018060 Cotter Pin 4/1, galv.
Extension Splice 24-2.

145
14

max 100
min 52
170

40
028060   1.940 Wedge Headpiece SRZ/SRU Complete with
For connecting push-pull props and kicker braces 1 pc. 027170 Pin Ø 16 x 42, galv.
to Steel Waler SRZ and SRU Profile U100 – U140. 1 pc. 018060 Cotter Pin 4/1, galv.

U100 48

24

14
100

82
U120
U140

Accessories
024250   0.331 Wedge K, galv.

117466  10.600 Push-Pull Prop RS 210, galv. Note

Extension length l = 1.30 – 2.10 m. Permissible load see PERI Design Tables.
For aligning PERI Formwork Systems and precast
concrete elements.

min 1300 max 2100

Ø48,3

Ø21 Ø17
Ø 60,6

1178
9

118238  12.100 Push-Pull Prop RS 260, galv. Note

Extension length l = 2.30 – 2.60 m. Permissible load see PERI Design Tables.
For aligning PERI Formwork Systems and precast
concrete elements.

min 2300 max 2600

Ø48,3

Ø17
Ø 60,6

Ø21
2178
9

71
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
117467  15.500 Push-Pull Prop RS 300, galv. Note
Extension length l = 1.90 – 3.00 m. Permissible load see PERI Design Tables.
For aligning PERI Formwork Systems and precast
concrete elements.

min 1900 max 3000

Ø48,3

Ø21 Ø17

Ø64,5
1773

9
117468  23.000 Push-Pull Prop RS 450, galv. Note
Extension length l = 2.80 – 4.50 m. Permissible load see PERI Design Tables.
For aligning PERI Formwork Systems and precast
concrete elements.

min 2800 max 4500

Ø48,3

Ø17

Ø 73
Ø21
2670

9
117469  39.900 Push-Pull Prop RS 650, galv. Note
Extension length l = 4.30 – 6.50 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.

min 4300 max 6500

Ø48,3

Ø17
Ø 88,9

Ø21
4140

028990 115.000 Push-Pull Prop RS 1000, galv. Note

Extension length l = 6.40 – 10.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.

min 6325 max 10000

Ø48,3 Ø17

Ø21 Ø21
Ø 102

10

72
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
103800 271.000 Push-Pull Prop RS 1400, galv. Note
Extension length l = 6.40 – 14.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems. Chain can be operated from bottom.

min 6400 max 14000

6460

17 x 200 = 3400 17 x 200 = 3400

Ø21 Ø21
Ø17
Ø48,3 Ø48,3

10
400 400

126666   3.070 Base Plate-3 for RS 210 - 1400 Complete with

For assembly of Push-Pull Props RS 210, 260, 2 pc. 105400 Pin Ø 20 x 140, galv.
300, 450, 650, 1000 and 1400. 2 pc. 018060 Cotter Pin 4/1, galv.
1 pc. 113063 Bolt ISO 4014 M12 x 80-8.8, galv.
1 pc. 113064 Hex Nut ISO7042-M12-8-G, galv.

105
Ø21

264 52
64

Accessories
124777   0.210 Anchor Bolt PERI 14/20 x 130

102018   4.880 Base Plate-2 for RS 1000/1400, galv. Complete with

For assembly of Push-Pull Props RS 210, 260, 300, 2 pc. 105400 Pin Ø 20 x 140, galv.
450, 650, 1000, 1400 and Heavy Duty Spindles. 2 pc. 018060 Cotter Pin 4/1, galv.
108

Ø21

290 95

73
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
117343   3.250 Base Plate-2 for RS 210 - 1400, galv. Complete with
For assembly of Push-Pull Props RS 210, 260, 2 pc. 105400 Pin Ø 20 x 140, galv.
300, 450, 650, 1000 and 1400. 2 pc. 018060 Cotter Pin 4/1, galv.

106
Ø21
52
261 64

Accessories
124777   0.210 Anchor Bolt PERI 14/20 x 130

028010  17.900 Push-Pull Prop RSS I Note

Extension length l = 2.05 – 2.94 m. Permissible load see PERI Design Tables.
For aligning PERI Formwork Systems.

min 2050 max 2940

Ø32

Ø70
Ø16,5
1915

10
Accessories
113397   1.600 Spindle Handle RSS / AV

113397   1.600 Spindle Handle RSS / AV Complete with

Spindle handle for screwing on Push-Pull-Props 2 pc. 722342 Screw ISO 4017 M8 x 25-8.8, galv.
RSS I, RSS II and Kickers AV 210 and AV RSS III. 2 pc. 711071 Nut ISO 7042 M8-8, galv.
179

196 130

028020  22.000 Push-Pull Prop RSS II Note

Extension length l = 2.91 – 3.80 m. Permissible load see PERI Design Tables.
For aligning PERI Formwork Systems.

min 2910 max 3800

Ø32
Ø 70

Ø16,5 Ø16,5
2775
15

10

Accessories
113397   1.600 Spindle Handle RSS / AV

74
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
028030  38.400 Push-Pull Prop RSS III Note
Extension length l = 4.60 – 6.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.

min 4600 max 6000

Ø48,3

Ø82,5
Ø16,5 Ø16,5
4399

15

9
106000   1.820 Base Plate-2 for RSS, galv. Complete with
For assembly of Push-Pull Props RSS. 1 pc. 027170 Pin Ø 16 x 42, galv.
1 pc. 018060 Cotter Pin 4/1, galv.

Ø11

85
Ø21

12
150 100

Accessories
124777   0.210 Anchor Bolt PERI 14/20 x 130

Kickers AV min. L max. L

057087   3.510 Kicker AV 82 500 820
057088   4.200 Kicker AV 111 790 1110
For aligning PERI Formwork Systems. Complete with
1 pc. 027170 Pin Ø 16 x 42, galv.
1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 500 max 820

min 790 max 1110
Ø30
Ø38

Ø16,5 Ø16x42

390
690
10
10

75
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
028110   4.850 Kicker AV 140 Complete with
Extension length l = 1.08 – 1.40 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI Formwork Systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 1080 max 1400

Ø30

Ø 38
Ø16,5 Ø16x42

980

10

10
028120  17.000 Kicker AV RSS III Complete with
Extension length l = 2.03 – 2.92 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI formwork systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 2030 max 2920

Ø32

Ø70
Ø16x42 Ø16,5
1915
10

10
Accessories
113397   1.600 Spindle Handle RSS / AV

108135  12.900 Kicker AV 210 Complete with

Extension length l = 1.28 – 2.10 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI Formwork Systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 1280 max 2100

Ø36
Ø 70

Ø16x42 Ø16,5
1171
10
10

Accessories
113397   1.600 Spindle Handle RSS / AV

76
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg
028080   2.970 Connector Kicker/Push-Pull Prop, galv. Complete with
For connecting push-pull props and kicker braces 1 pc. 018060 Cotter Pin 4/1, galv.
to Main Beam HDT. 1 pc. 027170 Pin Ø 16 x 42, galv.

Ø25

85
12
200 100

124777   0.210 Anchor Bolt PERI 14/20 x 130 Note

For temporary fixation to reinforced concrete See PERI data sheet!
structures. Drilling Ø 14 mm.

SW 24
Ø14
130

77
 PERI International

RU
CA

KZ

US AZ
TR
KR JP
TN LB
MA IL IR
JO KW
DZ
EG QA
MX SA AE IN
HK
OM
TH
PH
PA VN
NG

CO MY
SG
ID

TZ
PE BR
AO MZ

NA
CL AU
ZA
AR

North America Africa Asia

CA
Canada AO
Angola AE
United Arab Emirates KZ
Kazakhstan
PERI Formwork Systems, Inc. Pericofragens, Lda. PERI (L.L.C.) TOO PERI Kazakhstan
www.peri.ca www.peri.pt www.peri.ae www.peri.kz

MX Mexico DZ
Algeria AZ
Azerbaijan LB
Lebanon
PERI Cimbras y Andamios, S.A. de C.V. S.A.R.L. PERI PERI Repesentative Office PERI Lebanon Sarl
www.peri.com.mx www.peri.dz www.peri.com.tr [email protected]

PA
Panama EG
Egypt HK
Hong Kong MY
Malaysia
PERI Panama Inc. Egypt Branch Office PERI (Hong Kong) Limited PERI Formwork Malaysia Sdn. Bhd.
www.peri.com.pa www.peri.com.eg www.perihk.com www.perimalaysia.com

US
USA MA
Morocco ID
Indonesia OM
Oman
PERI Formwork Systems, Inc. PERI S.A. PT Beton Perkasa Wijaksana PERI (L.L.C.)
www.peri-usa.com www.peri.ma www.betonperkasa.com www.peri.ae

MZ
Mozambique IL
Israel PH
Philippines
PERI (Pty.) Ltd. PERI F.E. Ltd. PERI-Asia Philippines, INC.
South America www.peri.co.mz www.peri.co.il www.peri.com.ph

AR
Argentina NA
Namibia IN
India QA
Qatar
PERI S.A. PERI (Pty.) Ltd. PERI (India) Pvt Ltd PERI Qatar LLC
www.peri.com.ar www.peri.na www.peri.in www.peri.qa

BR
Brazil NG
Nigeria IR
Iran SA Saudi Arabia
PERI Formas e Escoramentos Ltda. PERI Nigeria Ltd. PERI Pars. Ltd. PERI Saudi Arabia Ltd.
www.peribrasil.com.br www.peri.ng www.peri.ir www.peri.com.sa

CL
Chile TN
Tunisia JO
Jordan SG
Singapore
PERI Chile Ltda. PERI S.A.U. PERI GmbH – Jordan PERI Asia Pte Ltd
www.peri.cl www.peri.es www.peri.com www.periasia.com

CO
Colombia TZ
Tanzania JP
Japan TH
Thailand
PERI S.A.S. PERI Formwork and Scaffolding Ltd PERI Japan K.K. Peri (Thailand) Co., Ltd.
www.peri.com.co www.peri.co.tz www.peri.co.jp www.peri.co.th

PE
Peru ZA South Africa KR
Korea TR
Turkey
PERI Peruana S.A.C. PERI Formwork Scaffolding (Pty) Ltd PERI (Korea) Ltd. PERI Kalıp ve İskeleleri
www.peri.com.pe www.peri.co.za www.perikorea.com www.peri.com.tr

KW
Kuwait VN
Vietnam
PERI Kuwait W.L.L. PERI ASIA PTE LTD
www.peri.com.kw www.peri.com.vn
 IS

FI
NO

SE EE
RU
LV
DK
LT

IR GB BY
NL PL

BE DE
LU CZ UA
SK
PERI GmbH
Formwork Scaffolding Engineering AT
CH HU
Rudolf-Diesel-Strasse 19 FR SI RO
89264 Weissenhorn HR
Germany
Tel. +49 (0)7309.950-0 BA RS
Fax +49 (0)7309.951-0 IT
BG
[email protected]
www.peri.com
AL
ES
PT GR
TR

Oceania
AU
Australia DK
Denmark IT
Italy SE
Sweden
PERI Australia Pty. Ltd. PERI Danmark A/S PERI S.r.l. PERI Sverige AB
www.periaus.com.au www.peri.dk www.peri.it www.peri.se

EE
Estonia LT
Lithuania SI
Slovania
PERI AS PERI UAB PERI oplate i skele d.o.o
Europe www.peri.ee www.peri.lt www.peri.com.hr

AL
Albania ES
Spain LU
Luxembourg SK
Slovakia
PERI Kalıp ve İskeleleri PERI S.A.U. N.V. PERI S.A. PERI spol. s. r.o.
www.peri.com.tr www.peri.es www.peri.lu www.peri.sk

AT
Austria FI
Finland LV
Latvia UA
Ukraine
PERI Ges.mbH PERI Suomi Ltd. Oy PERI SIA TOW PERI
www.peri.at www.perisuomi.fi www.peri-latvija.lv www.peri.ua

BA Bosnia and Herzegovina FR

France NL
Netherlands
PERI oplate i skele d.o.o PERI S.A.S. PERI b.v.
www.peri.com.hr www.peri.fr www.peri.nl

BE
Belgium GB United Kingdom NO
Norway
PERI N.V. PERI Ltd. PERI Norge AS
www.peri.be www.peri.ltd.uk www.peri.no

BG
Bulgaria GR
Greece PL
Poland
PERI Bulgaria EOOD PERI Hellas Ltd. PERI Polska Sp. z o.o.
www.peri.bg www.perihellas.gr www.peri.com.pl

BY
Belorussia HR
Croatia PT
Portugal
IOOO PERI PERI oplate i skele d.o.o. Pericofragens Lda.
www.peri.by www.peri.com.hr www.peri.pt

CH
Switzerland HU
Hungary RO
Romania
PERI AG PERI Kft. PERI România SRL
www.peri.ch www.peri.hu www.peri.ro

CZ Czech Republic IR
Ireland RS
Serbia
PERI spol. s r.o. Siteserv Access & Formwork PERI oplate d.o.o.
www.peri.cz www.siteservaccess.ie www.peri.rs

DE
Germany IS
Iceland RU
Russia
PERI GmbH Armar ehf. OOO PERI
www.peri.de www.armar.is www.peri.ru
The optimal System
for every Project and
every Requirement

Wall Formwork Column Formwork Slab Formwork

Climbing Systems Bridge Formwork Tunnel Formwork Shoring Systems

Construction Scaffold Facade Scaffold Industrial Scaffold Access

DE en 11 | 2017 5eb 790578 © PERI GmbH

Protection Scaffold Safety Systems System-Independent Accessories Services

PERI GmbH
Formwork Scaffolding Engineering
Rudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950 - 0
Fax +49 (0)7309.951- 0
[email protected]
www.peri.com