Scribd
Upload
255 views2 pages

13 17513 Operational Safety Guideline Electric Drill

This document provides guidelines for safely operating an electric drill. It describes the drill, identifies potential hazards such as exposed moving parts and electricity, and lists required personal protective equipment. It also includes a safe work checklist with steps for pre-operation, operation, and post-operation tasks such as securing the workpiece, keeping hands clear of moving parts, and good housekeeping practices. Only trained operators listed on page 2 are authorized to use the drill.

Uploaded by

Norman Polilin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
255 views2 pages

13 17513 Operational Safety Guideline Electric Drill

This document provides guidelines for safely operating an electric drill. It describes the drill, identifies potential hazards such as exposed moving parts and electricity, and lists required personal protective equipment. It also includes a safe work checklist with steps for pre-operation, operation, and post-operation tasks such as securing the workpiece, keeping hands clear of moving parts, and good housekeeping practices. Only trained operators listed on page 2 are authorized to use the drill.

Uploaded by

Norman Polilin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

No.

15
Authorised By:
Ass. Dir Infrastructure Planning
Operational Safety Guideline
& Compliance
Electric Drill
Issue Date: September 2013 Page Number: 1 of 2
Last Reviewed: September 2013
Next Review Date: September 2014

DO NOT use this machine unless you have been trained in its safe use and operation.
Description of Work: Using a electric drill.
Potential Hazards: Exposed moving parts and
electrical hazard with the potential to cause harm
through entanglement, impact and cutting, exposure
to heat, dust, projectiles and sharp objects.

Personal Protective Equipment (PPE) Required (Check the box for required PPE):

Gloves Face Masks Eye Welding Appropriate Hearing Protective


Protection Mask Footwear Protection Clothing

Safe Work Checklist:

1. PRE-Operation:
 Task (e.g. Drawings, instructions, specifications etc) is clearly understood.
 Ensure drill bit is installed tightly into chuck and chuck key has been removed (if applicable).
 Work piece is secured.
 Correct drill speed has been set.
 Where necessary, depth stop for drill has been set or wood to be drilled is rested on scrap.
 Correct drill bit has been selected for material being drilled.
 Identify ON/OFF switch and emergency stop button (if applicable).
2. Operation:
 Only use as per directions in User Manual.
 Check that drill bit runs ‘true’ and does not wobble.
 Keep hands clear of work piece and away from rotating tool.
 Back out frequently on deep cuts to clean and cool drill bit.
 Turn off drill before speed settings or bit is changed.
 Exercise caution when removing hot drill bit.
3. POST-Operation:
 Switch off drill before removing waste material from the drill table.
 Ensure good housekeeping practices are in place to minimise dust build-up.
 Return clean drill bit to drill rack and clamps to their storage area.

THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED


No. 15
Authorised By:
Ass. Dir Infrastructure Planning
Operational Safety Guideline
& Compliance
Electric Drill
Issue Date: September 2013 Page Number: 2 of 2
Last Reviewed: September 2013
Next Review Date: September 2014

Competent Persons (The following persons are authorised to operate the equipment).

Name: Title: Contact Details:

THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED

You might also like