Scribd
Upload
63 views1 page

Models: David Grissom (DGT) : Solder Black Ground Wire From Bridge To Volume Pot Casing

The document provides wiring instructions for pickups, volume and tone controls, and output jack of an electric guitar. It shows the bridge pickup, neck pickup, 3-way toggle switch, volume potentiometer, and tone potentiometer need to be wired. The ground wires from the bridge, neck pickups and switches are soldered to the casing of the volume pot. The hot leads are soldered to the appropriate lugs on the 3-way switch and tone pot.

Uploaded by

Greg Jonsky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views1 page

Models: David Grissom (DGT) : Solder Black Ground Wire From Bridge To Volume Pot Casing

The document provides wiring instructions for pickups, volume and tone controls, and output jack of an electric guitar. It shows the bridge pickup, neck pickup, 3-way toggle switch, volume potentiometer, and tone potentiometer need to be wired. The ground wires from the bridge, neck pickups and switches are soldered to the casing of the volume pot. The hot leads are soldered to the appropriate lugs on the 3-way switch and tone pot.

Uploaded by

Greg Jonsky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Solder black ground

wire from bridge


to volume pot casing
Neck Pickup
Bridge Pickup
Bridge

Volume 3-way toggle

180
pf
180 Jack 'hot' uf
pf
(black) 22
.0
Solder Harness
Shielding to
Volume Pot Neck

1.1
Casings (ground)
sh-

k
Pu ll

2.2
pu e
Ton

k
Volume

Solder Jack
Shielding to
Volume Pot Jack Output
Casing (ground)

Volume pot wiring: 3-way pickup selector switch:


Pickup "Hot"
Lead
Neck Volume Bridge Volume
Red (Hot) Red (Hot)
180
pf
To volume pot
Black wire to 3-way right leg (ground)
22
toggle ground tab .0

To push-pull
Red wire to 3-way tone pot middle leg
toggle "hot" tab

Push-pull tone pot:

1.1K Resistor 2.2K Resistor

White neck White bridge


pickup wire pickup wire

22
.0
Black wire to volume
pot casing (ground)
.022 uf
capacitor

Models: David Grissom (DGT)

You might also like