Tradition is our strength

Innovation is our mission

www.itsgut.com

CAVI2COAT
SANTEX RIMAR GROUP Worldwide
• Italy
• Switzerland
• China
• India

Multifunctional coating
and laminating
SANTEX RIMAR AG

Fliegeneggstrasse 9, CH – 9555 Tobel, Switzerland

Tel. +41 71 918 66 66
Machines for technical textiles
[email protected] – www.santexrimar.com
CAVI2COAT Multifuctional coating and laminating
The coating modus can be changed between rotogravure and
fullsurface coating.

Innovative technologies for highest coating precision with

CAVI2COAT offers the rotogravure and a number of multi-roll processes enormous flexibility and short downtime.

» Rotogravure mode: The adhesive is fed in plasticized form to a coating head. » It is taken over by the engraved roll, the blank parts cleaned
off with a doctor blade, the adhesive inside the cavities is transferred onto the substrate passing by on the pressure counter roll.

» Multi-Roll mode: The adhesive is fed from the melter or the extruder in between the coating and dosing roll. » Depending on the gap
between the rolls, a specified quantity of adhesive is transferred onto the substrate. » The coating roll rotates together whit the counter pressure
roll in the same direction as the substrate for Direct-Coating or the coating roll rotates in counter direction for Reverse-Roll-Coating.
» These processes allow a one side full-surface or irregular-open coating surface.

» Another option is when the substrate passes through the gap of the coating and dosing roll. » It is dipped through the adhesive and enables
Both-Side-Coating.

Advantages of CAVI2COAT
• Environmental-friendly process, free of solvents and water
• No auxiliary equipment for the evaporation of exhaust air and other Advantages of CAVI2COAT
questionable emissions Environmental-friendly process, free of solvents and water
• Substrates are not subject to any deteriorating thermal stress No auxiliary equipment for the evaporation of exhaust air and other
questionable emissions
• No drying or sintering needed Substrates are not subject to any deteriorating thermal stress T
No drying or sintering needed W
• Lower power consumption-no special preparation of the coating mass
Lower power consumption – no special preparation of the coating W
• Wide range of application and flexibility thanks to the large selection of mass A
adhesives Wide range of application and flexibility thanks to the large selection
of adhesives C
• Simple operation and high production reliability-large choice of substrates
Simple operation and high production reliability – large choice of
• Full surface, dot or a diversity of net-shaped coating patterns substrates S
Dot or a diversity of net-shaped coating patterns

High precision dosing and

coating rolls enable a perfect CAVI2COAT
full surface coating process.The TECHNICAL DATA
dosing roll can be replaced by

CAVI2COAT
Working width 1200 - 2600 mm
a rotogravure roll for partial and
Working speed up to 80 m/min
dot coating process.
Adhesives Thermoplastic adhesive,
Reactive PUR
Coating weights 3 - 80 g/m2 (rotogravure)
10 - 500 g/m2 (full-surface)
Substrate Suitable fabrics, knitted fabrics, non-
The backing roll is placed
wovens, membranes, films, foams
underneath the coating roll.
The position can be preselected
between Reverse-roll and Direct
coating process.