Tradition is our strength

Innovation is our mission

www.itsgut.com
SANTEX RIMAR GROUP Worldwide
• Italy

CAVIFLEX
• Switzerland
• China
• India

Hotmelt laminating machine with

exchangeable coating modules
SANTEX RIMAR AG

Fliegeneggstrasse 9, CH – 9555 Tobel, Switzerland

Tel. +41 71 918 66 66
Machines for technical textiles
[email protected] – www.santexrimar.com
CAVIFLEX Hotmelt laminating machine with exchangeable coating modules For the first time there is the possibility to operate 4 different
Hotmelt Coating Technologies in the same laminating plant.

» CAVITEC combines the Holmelt coating machine with laminating calenders, low tension drive and web guiding systems, unwinders for Who knows today the requirements of tomorrow?
substrate and laminate, winder for product, accumulators, etc. to a complete lamination plant according to your requirements. At the beginning you may start with one system and later retrofit
» Auxiliary equipment for heating, cooling, melting (extruder, drum or block melter, ...) complete the scope of supply. further coating modules.
The available modules are all suitable to the same plant. These
» CAVIFLEX can be equipped with only one or with a second application head with 4 different coating systems. available modules are:
» The two head system allows the production of Tri-Laminates in one pass. • CAVIMELT gravure roll
• CAVIROLL multi roll
• CAVISCREEN rotary screen
• CAVISLOT slot die

Advantages of CAVIFLEX
• Environmental-friendly process, free of solvents and water
• No auxiliary equipment for the evaporation of exhaust air and other
questionable emissions
• Substrates are not subject to any deteriorating thermal stress
• No drying or sintering needed
• Lower power consumption-no special preparation of the coating mass
• Wide range of application and flexibility thanks to the large selection of
adhesives
• Simple operation and high production reliability-large choice of
substrates
• Dot or a diversity of net-shaped coating patterns
• Laminates with soft touch and surface application according to the
specified requirements

CAVIFLEX
TECHNICAL DATA
Working width 500 - 2600 mm
Working speed 2 - 200 m/mim
Adhesives Thermoplastic adhesive,

CAVIFLEX
Reactive PUR
Coating weights Gravure rolls module: 3 - 80 g/m2
(provided the corresponding
engraved rollers are purchased
Multi roll module 5 - 500 g/m2
Screen module 8 - 50 g/m2 (provided the corre-
sponding screens are purchased
Slot die module 1 - 200 g/m2
Modul Cleaning device
Substrate Suitable fabrics, knitted fabrics, non-
wovens, membranes, films, foams