Scribd
Upload
110 views

Biometric Device SDK - Programmers Guide

The document describes common processes for different series of access control devices, including downloading attendance and operation records, setting access control, downloading and enrolling user information, receiving real-time events, and uploading short messages. Specific processes are broken down for the B&W, iFace, and TFT series, such as downloading information for all or a specified user, and different methods for online user enrollment.

Uploaded by

Chit Khun
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
110 views

Biometric Device SDK - Programmers Guide

The document describes common processes for different series of access control devices, including downloading attendance and operation records, setting access control, downloading and enrolling user information, receiving real-time events, and uploading short messages. Specific processes are broken down for the B&W, iFace, and TFT series, such as downloading information for all or a specified user, and different methods for online user enrollment.

Uploaded by

Chit Khun
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

1 Common Processes

1.1 B&W Series


For details, see the descriptions of the demo program.

1.1.1 Downloading Attendance Records


1.1.2 Downloading Operation Records

1.1.3 Setting Access Control


1.1.4 Downloading User Information, and Fingerprint Templates

The left diagram shows the process of downloading the information of all users. The right
diagram shows the process of downloading the information of a specified user.
1.1.5 Receiving Real-time Events

Real-time events can be received in two modes. The second mode is recommended.

1.1.6 Enrolling Users Online (Uploading Information, and Fingerprint Templates


of Users)

There are two online user enrollment modes. The left diagram shows the process in which the
device accesses the enrollment interface to enroll a user after being connected. The right
diagram shows the process of creating a user on the device and uploading the card number,
password, and fingerprint information for the user (that is, enrolling a card user, a password user,
and a fingerprint user).
1.1.7 Uploading Short Messages
1.2 iFace Series
For details, see the descriptions of the demo program.

1.2.1 Downloading Attendance Records

1.2.2 Downloading Operation Records


1.2.3 Setting Access Control

1.2.4 Downloading User Information, Fingerprint Templates, or Face Templates

The left diagram shows the process of downloading the information of all users. The right
diagram shows the process of downloading the information of a specified user.
1.2.5 Receiving Real-time Events

Real-time events can be received in two modes. The second mode is recommended.

1.2.6 Enrolling Users Online (Uploading Information, Fingerprint Templates, and


Face Templates of Users)

The following diagram shows the process of creating a user on the device and uploading the
card number, password, and fingerprint information for the user (that is, enrolling a card user, a
password user, and a fingerprint user).
1.3 TFT Series
For details, see the descriptions of the demo program.

1.3.1 Downloading Attendance Records

1.3.2 Downloading Operation Records


1.3.3 Setting Access Control

1.3.4 Downloading User Information, or Fingerprint Templates

The left diagram shows the process of downloading the information of all users. The right
diagram shows the process of downloading the information of a specified user.
1.3.5 Receiving Real-time Events

Real-time events can be received in two modes. The second mode is recommended.

1.3.6 Enrolling Users Online (Uploading Information,and Fingerprint Templates


of Users)

There are two online user enrollment modes. The left diagram shows the process in which the
device accesses the enrollment interface to enroll a user after being connected. The right
diagram shows the process of creating a user on the device and uploading the card number,
password, and fingerprint information for the user (that is, enrolling a card user, a password user,
and a fingerprint user).
Start Start

Connect the device Connect the device


(Connect_Net or others) (Connect_Net or others)

Register card
Start online Set card number of the user
enrollment (attribute:cardnumber or
(StartEnroll) SetStrCardNumber)

Register user and password


Is enrollment Upload user information to device. Create the user
end? if the user does not exist
(SSR_SetUserInfo)

Y Register fingerprint
Upload fingerprint template to specified user
(SSR_SetUserTmpStr or
SetUserTmpExStr)
Enable device to
wait for user
verification
(startIdentify)

End End

1.3.7 Uploading Short Messages

You might also like