Scribd
Upload
32 views

Printashrink TW3: Technical Data

The document summarizes the Printashrink TW3 heatshrink sleeve. It has a 3:1 shrink ratio and low shrink temperature of 70°C, making it suitable for irregular or large components. It is black, available in diameters up to 50mm, and can be cut and printed. It provides insulation, protection from mechanical damage, cable bundling and protection of wires and electrical components. Properties include an operating temperature range of -55°C to +125°C and flame retardancy.

Uploaded by

Nicacio Lucena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

Printashrink TW3: Technical Data

The document summarizes the Printashrink TW3 heatshrink sleeve. It has a 3:1 shrink ratio and low shrink temperature of 70°C, making it suitable for irregular or large components. It is black, available in diameters up to 50mm, and can be cut and printed. It provides insulation, protection from mechanical damage, cable bundling and protection of wires and electrical components. Properties include an operating temperature range of -55°C to +125°C and flame retardancy.

Uploaded by

Nicacio Lucena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Printashrink TW3

Printashrink TW3 is a 3:1 shrink ratio, commercial grade


thin wall heatshrink polyolefin with a low shrink
temperature. It is a low cost, fire retardant solution ideal for
fitting over irregular or large components. Supplied in black
as standard, diameters up to 50mm are available. It can be
cut and printed as required.
This high quality, UL approved commercial grade of heatshrink
sleeve is ideal for insulation and protection purposes. It is a very
resilient tube used for mechanical protection, cable bundling and
the protection of wires, cables, harnesses, connectors, terminals
and electrical components. The 3:1 shrink ratio enables easy
installation where irregular shapes and large components are an
unavoidable factor of manufacture. We offer our full range of
printing and cutting services on this sleeve making it perfect for
identification, branding or marking purposes.
Properties Typical Values Test Methods
General
Technical Data Operating Temperature -55°C – +125°C
• Shrink Ratio: 3:1 Minimum shrink temperature 70°C
• Shrink Temperature” +70°C Full recovery temperature 100°C
• Operating Temperature -55°C – +125°C
• Flame Retardant: Yes Shrink temperature 3:1
• Colours: Black, Other colours available to order Physical
• Sizes: 1.5/0.5mm → 50/17mm Tensile Strength >14 MPa
• Packing: Reels, mini-reels, mini-packs, cut to length, kits, cut Thermal
sleeves
• Print: Yes, full range of text and logos Flammability Pass VW-1
• Approvals: UL 224 125C 600V VW-1, RoHS Compliant Electrical
• Applications / Industries: General, Commercial, Electrical, Dielectric strength >20kV/mm
Electronics, Industrial, Mechanical, Automotive

Size (mm) Supplied diameter (mm) Shrunk diameter (mm) Nominal wall thickness (mm)
1.5/0.5 1.6 0.5 0.45
3/1 3.2 1.0 0.55
4.8/1.6 4.8 1.5 0.60
6/2 6.4 2.0 0.65
9/3 9.5 3.0 0.75
12/4 12.7 4.0 0.8
18/6 19.1 6.0 0.90
24/8 25.4 8.0 1.00
39/13 39.0 13.0 1.25
50/17 50.0 17.0

Printasleeve Ltd is as diligent as possible in compiling and updating the above information. It reflects averages derived from product sample testing, is
subject to normal manufacturing and testing tolerances and may be changed without notice. Furthermore aesthetic and textural style differences can
result in local variation. For specific or further information concerning our products, their specifications and their utiliation please contact us. E & OE

Printasleeve Ltd, West Chinnock, Crewkerne, Somerset, TA18 7QA | Tel: 01935 881516 | email: [email protected]

You might also like