Scribd
Upload
30 views

Slab Design by ShubhamBabar

The document describes the design of a two-way reinforced concrete slab. It provides dimensions, material properties, and goes through several steps of calculating required reinforcement and checking deflection and shear. Reinforcement amounts and spacing are calculated and provided for both the main steel and distributed steel.

Uploaded by

Maharajan Mcs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
30 views

Slab Design by ShubhamBabar

The document describes the design of a two-way reinforced concrete slab. It provides dimensions, material properties, and goes through several steps of calculating required reinforcement and checking deflection and shear. Reinforcement amounts and spacing are calculated and provided for both the main steel and distributed steel.

Uploaded by

Maharajan Mcs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 7

STEP - 1 STEP - 2

Inputs - Support Condition


Lx (Short Span) 4.00 (m)
Ly (Long Span) 6.00 (m)
Live Load 2 (KN/m2)
F.F. 1 (KN/m2) 0.000
Fck 20 (N/mm2) 0
Fy 250 (N/mm2) 0.00
d 100 (mm)
dt 20 (mm)
D 120 (mm)
Aspect Ratio 1.50
Type Two Way
Load 9.00 (KN/m)

STEP - 3
If One-Way If
Mx 18.00 (KN.m) Mx(sup)
d(reqd) 77.88 (mm) Mx(mid)
d(provided) 150 (mm) My(sup)
Cover 20 (mm) My(mid)
Depth 170 (mm)

One Way Slab

Steel Main Distributed

Ast(reqd) (mm2) 579.73 255.00


Dia of bar (mm) 8 6
Spacing(reqd) (mm) 86.70 110.88
Spacing(provided) (mm) 200 200
Ast(provided) (mm2) 251.33 141.37
% of steel 0.17 0.10
upport Conditions-

0.084 1 12.16

0.044 Y 6.26
0.063 X 9.12

0.000 0 0.00

STEP - 3
If Two-Way
12.16 (KN.m) d(reqd) 64.01 (mm)
9.12 (KN.m) d(provided) 100 (mm)
0.00 (KN.m) Cover 20 (mm)
6.26 (KN.m) Depth 120 (mm)

STEP - 4
Two Way Slab
For Lx
Distributed
Steel At Support
255.00 Ast(reqd) (mm2) 604.62
6 Dia of bar (mm) 6
110.88 Spacing(reqd) (mm) 46.76
200 Spacing(provided) (mm) 180
141.37 Ast(provided) (mm2) 157.08
0.10 % of steel 0.16
1) Fill only Red colour cells
2) In Step 2, If slab is continuous Put 1 in that cell
If slab is simply supported Put 0 in that cell
3) Cells in yellow colour, it required attentation

0.000 Designed and Developed By


0 Shubham S. Babar
0.00
In Association with
Hyonkows.com

STEP - 5
Check For Deflection Check For Shear
Fs 558.12 (N/mm2) Tv 0.270 (N/mm2)
Modification Factor 0.23 Tc' 0.323 (N/mm2)
Check For d NOT OK Check OK

Two Way Slab


For Lx For Ly
At Mid-Span At Support At Mid-Span
443.81 0.00 327.63
8 6 6
113.26 157.08 86.30
180 250 123456
279.25 113.10 0.23
0.28 0.12 0.00
that cell
t 0 in that cell

You might also like