0% found this document useful (0 votes)
210 views2 pages

Brosur - Studer VarioTrack Series - HX2018.1

The VarioTrack VT-65 and VT-80 are solar charge controllers that can handle up to 1000W and 1250W of solar input respectively. They have 4 stage charging, battery temperature compensation, and protections against reverse polarity, overvoltage, overtemperature, and reverse current at night. They operate between 7-68V and have efficiencies over 99%. Communication options include Studer BUS, RCC controllers, and Xcom devices.

Uploaded by

CNP WEB
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
210 views2 pages

Brosur - Studer VarioTrack Series - HX2018.1

The VarioTrack VT-65 and VT-80 are solar charge controllers that can handle up to 1000W and 1250W of solar input respectively. They have 4 stage charging, battery temperature compensation, and protections against reverse polarity, overvoltage, overtemperature, and reverse current at night. They operate between 7-68V and have efficiencies over 99%. Communication options include Studer BUS, RCC controllers, and Xcom devices.

Uploaded by

CNP WEB
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VarioTrack

Series
Model VT-65 VT-80
Electrical characteristics PV array side
At nominal battery voltage 12 V 24 V 48 V 12 V 24 V 48 V
Maximum solar power recommended (@STC) 1000 W 2000 W 4000 W 1250 W 2500 W 5000 W
Maximum solar open circuit voltage 80 V 150 V 80 V 150 V
Maximum solar functional circuit voltage 75 V 145 V 75 V 145 V
Minimum solar functional circuit voltage Above battery voltage
Electrical characteristics battery side
Maximum output current 65 A 80 A
Nominal battery voltages Automatic / manual set to 12, 24 or 48 V
Operating voltage range 7 - 68 V
Performances of the device

          > 99 %
Maximum stand-by self-consumption (48 V) 25 mA > 1.2 W
Maximum stand-by self-consumption (24 V) 30 mA > 0.8 W
Maximum stand-by self-consumption (12 V) 35 mA > 0.5 W
Charging stages 4 stages: Bulk, Absorption, Float, Equalization
Battery temperature compensation (available with accessory BTS-01) –3 mV / °C /cell (25°C ref) default value adjustable -8 to 0 mV / °C
Electronic protections
PV reverse polarity Up to –150 V
Battery reverse polarity Up to –150 V
Battery overvoltage Up to 150 V
Over temperature Protected
Reverse current at night Prevented by relays
Environment
Operating ambient temperature range –20 to 55°C
Humidity 100 %
Ingress protection of enclosures IP54, IEC/EN 60529:2001
Mounting location indoor
General data
Warranty 5 years
   9001:2008 / 14001:2004
Weight 5.2 kg 5.5 kg
Dimensions h/w/l [mm] 120 / 220 / 310 120 / 220 / 350
Parallel operation (separated PV arrays) Up to 15 devices
Max wire size 35 mm2
Glands M 20 × 1,5
Communication
Network cabling STUDER communication BUS
Remote control & Communication RCC-02/-03, Xcom-232i / Xcom-LAN / Xcom-GSM / Xcom-SMS
Menu languages English / French / German / Spanish
Data logging With RCC-02/03, Xcom-232i on SD card · One point every minute
Accordance to standards
CE compliant EMC 2004/108/EC · LV 2006/95/EC · RoHS 2011/65/EU
Safety IEC/EN 62109–1:2010
EMC (Electro Magnetic Compatibility) IEC/EN 61000–6–3:2011 · IEC/EN 61000–6–1:2005
Accessories
z z
Remote control RCC-02 or RCC-03
z z
Module Xcom-232i
z z
Communication sets Xcom-LAN / Xcom-GSM / Xcom -SMS
z z
Battery Status Processor BSP
z z
2 aux. contacts module ARM-02
z
Cooling Module ECF-01 Included
z z
Battery temp. sensor BTS-01 (3 m)
z z
Communication cable CAB-RJ45-8-2

Data may change without any notice

You might also like