Scribd
Upload
60 views

06 Rectangular Components

This document discusses resolving vectors into rectangular (x and y) components. It explains that a vector v can be expressed as the sum of its horizontal (vx) and vertical (vy) components. Trigonometry for right triangles is used to solve for the magnitudes of the components. An example problem finds the x and y components of a 28N vector at a 65 degree angle. The document states that resolving vectors into components allows vectors to be added in a new, adaptable, and useful way.

Uploaded by

jack john
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
60 views

06 Rectangular Components

This document discusses resolving vectors into rectangular (x and y) components. It explains that a vector v can be expressed as the sum of its horizontal (vx) and vertical (vy) components. Trigonometry for right triangles is used to solve for the magnitudes of the components. An example problem finds the x and y components of a 28N vector at a 65 degree angle. The document states that resolving vectors into components allows vectors to be added in a new, adaptable, and useful way.

Uploaded by

jack john
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Resolution of Vectors into Rectangular Components

To break a vector, ~v , into rectangular components means to break them into


x and y (or horizontal and vertical components).

The horizontal and vertical compo-


nents of ~v are normally expressed as
v~x and v~y respectively. The vector ~v
is always the sum of its components,

~v = v~x + v~y .

In order to solve for the magnitudes of v~x and v~y we must use trigonometry
for right angled triangles.

Example 1.1. Find v~x and v~y for the vector in the following diagram.

Since we have a right angle triangle,


vx vy
cos 65◦ = sin 65◦ =
28N 28N
⇒ vx = cos 65◦ · 28N vy = sin 65◦ · 28N

⇒ v~x = 11.8 N [Right] ⇒ v~y = 25.4 N [Down].

By breaking vectors into their rectangular components, we can add vectors


in a new way. This method is very adaptable and useful in cases where the
sine and cosine law methods are cumbersome. It will also be used more
exclusively later in the course.

*Explore the GSP file


VectorAdditionByComponents.gsp

Assign the students questions from the text for them to practice breaking
vectors into components.

Example 1.2. Inclined Plane Example A box weighing 140 N is resting on


a ramp that is inclined at an angle of 20◦ . Resolve the weight vector F~g into
rectangular components that are parallel and perpendicular to the plane.

1
In this case, we must break F~g into
rectangular components as shown in
the diagram on the right. However, in
order to calculate the magnitudes of
the components, we must first deter-
mine the angle θ.

From the next diagram we can see that


x + z = 90◦ since the sum of angles
in a triangle must be 180◦ , but it is
also clear that z + y = 90◦ . Thus,
x = y, and so the angle θ is in fact
the same measure as the angle of the
incline, and θ = 20◦ .

Now to calculate the components, we have that


g// = (140N ) sin 20◦ g⊥ = (140N ) cos 20◦
g// = 48 N g⊥ = 132 N

You might also like