Scribd
Upload
119 views

Commands:: For Changining Periodic Location Update Timer

This document contains commands for configuring various parameters on 2G BTS and BSC networks. It includes commands for changing timer values, neighbor lists, BCCH configuration, alarm monitoring, and other radio frequency and call processing parameters.

Uploaded by

Anonymous yzm4ussws
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
119 views

Commands:: For Changining Periodic Location Update Timer

This document contains commands for configuring various parameters on 2G BTS and BSC networks. It includes commands for changing timer values, neighbor lists, BCCH configuration, alarm monitoring, and other radio frequency and call processing parameters.

Uploaded by

Anonymous yzm4ussws
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

DOCUMENTTYPE 1 (6)

TypeUnitOrDepartmentHere
TypeYourNameHere TypeDateHere

Commands:

*For Changining Periodic Location Update Timer :

=>ZEQO:BTS= :CCH; To CHECK THE VALUE.


=>ZEQJ:BTS= :PER: ; To Modify.

For Changing AHOP-

ZEQO:BTS= ;
ZEQS:BTS= :L;
ZEQE:BTS= :AHOP=N;

For CHECK ALARM HESTORY-

ZEHO:YEAR-M-DD,TIME:BCF= ;

For CHECK ALL DAYALARM HESTORY-

ZEOH::BCF= ;

For CHECK NEIGH LIST-

ZEAP:BTS= ;

ADD NEIGH IN SAME BSC-

ZEAC:BTS= ::ABTS= ;

ADD NEIGH IN DIFF BSC-

ZEAC:BTS= S::LAC=T,CI=T,NCC=T,BCC=T,FREQ=T;

NEIGH DELETION-

ZEAD:BTS= ::LAC= ,CI= ;

NEIGH DELETION BY INDEX FROM ZEAP-


DOCUMENTTYPE 2 (6)

TypeUnitOrDepartmentHere
TypeYourNameHere TypeDateHere

ZEAD:BTS=S:INDEX= ;

For SHIFT BCCH-

ZDTC:T0-BCF-TRX:AD;
ZDTC:T0-BCF-TRX:WO;

For CHECK SLIP-

ZYMO:ET;
ZYMO: BCF: OMU;

CHECK DOWN SITES-

ZEOL::NR=7767;

CHECK CHANNEL FAIL ON SITES IN BSC-

ZEOL::NR=7745;

To GIVE BCF RESET-

ZEFS:BCF= :L;
ZEFS:BCF= :U;
For Changing FRL,FRU Value.

ZEQM:BTS= :FRL= ,FRU= ;

*For Changing RXP Value.

=>ZEQG:BTS= :RXP= ;

*For Locking & Unlocking the TRX

=>ZERS:BTS= ,TRX= :L; LOCK


=>ZERS:BTS= ,TRX= :U; UNLOCK

*For Changing DMAX Value.


DOCUMENTTYPE 3 (6)

TypeUnitOrDepartmentHere
TypeYourNameHere TypeDateHere

=>ZEQM:BTS= :DMAX= ;

*For Changing HYS Value.

ZEQG:BTS :HYS= ;

*For Changing BMA Value.

ZEQM:BTS :BMA= ;

*For Changing PMAX2 Value.

ZEQO:BTS= :ALL;
ZEUO:BTS= ;
=>ZEUG:BTS= :PMAX2= ;

CHECK ATTER ALARM-

ZAHO::NR=2992;

CHECK ABIS PORT-

ZAHO::NR=2993;

For Changing SL Value.

ZEAM:BTS= ::CI= ,LAC= ::SL= ;

For Changing DRT Value.

ZEAM:BTS= ::CI= ,LAC= ::DRT= ;


For Changing SYNC Value.

ZEAM:BTS= ::CI= ,LAC= ::SYNC= ;


DOCUMENTTYPE 4 (6)

TypeUnitOrDepartmentHere
TypeYourNameHere TypeDateHere

*For Changing GPRS Parameters.

=>ZEQV:BTS= :CDED= ,CDEF= ;

*For Changing state of trx on ET.

=>ZDTC:DNAME:WO;

*For Changing Max Que Length,

=>ZEQM:BTS= :MQL= ;

*TO CHECK FOR PER FILE LOADED IN BSC.

=>ZWOI:10,53;
=>ZWOC:10,53,FF;(TO ENABLE PER FILE)

*TO CHANGE THE PREFFERED BCCH,

=>ZERM:BTS= ,TRX= :PREF=N;

*TO ENABLE OR DISABLE ANTENNA HOPPING,

=>ZEQE:BTS= :AHOP=Y/N;

*TO CHANGE MAL OF THE CELL,

=>ZEQA:BTS= :MAL= ,MAIO= ,OFFSET= ;

*TO MODIFY T200S PARAMETER,

=>ZEFM:BCF ID::T200S= ;

*TO MODIFY BTS HOPPING MODE,

=>ZEQE:BTS= :HOP=N;

*TO CREATE NEW MAL ID,


DOCUMENTTYPE 5 (6)

TypeUnitOrDepartmentHere
TypeYourNameHere TypeDateHere

=>ZEBE:MAL ID(NEW),1800:FREQ=A & B & C & D........;

*TO MODIFY EXISTING MAL ID,

=>ZEBT:MAL ID(EXISTING),A:FREQ=A & B & C & D........;

*TO ENAVLE OR DISABLE DIRECTED RETRY

=>ZEQF:BTS= :DR=N;

*TO MODIFY T3101 TIMER VALUE,

=>ZEGT:T3101:1,TIMER VALUE(FROM 1 TO 5 SECONDS).

*TO CHECK THE BA LIST,

=>ZEBO:;

*TO ADD FREQUENCIS IN THE BA LIST,

=>ZEBM:1,A:FREQ=A & B......;

*TO CHECK THE DAC ALARM IN THE BSC,

=>ZEOL::NR=7601;

*TO CHECK THE BTS WITH NO TRANSACTION ALARM IN THE BSC,

=>ZEOL::NR=7738;

*TO CHECK THE CH FAILURE RATE ALARM IN THE BSC,

=>ZEOL::NR=7743/7745;

*TO CHANGE THE PLMN PERMITTED VALUES,

=>ZEQF:BTS= :PLMN=01 && 07;

*TO CHANGE THE PLMN PERMITTED VALUES,

=>ZEQF:BTS= :DR=Y/N;
DOCUMENTTYPE 6 (6)

TypeUnitOrDepartmentHere
TypeYourNameHere TypeDateHere

*TO CHECK THE MSC OF THE GIVEN BSC,

=>ZNHI:NA0;

*TO CHECK THE AHOP IS ACTIVETED IN GIVEN BSC OR NOT,

=>ZNHI:NA0;

*TO IMPLEMENT AHOP IN GIVEN BSC,

=>ZWOA:2,00809,A(ACTIVATE)/D(DEACTIVATE);

*TO CHECK & MODIFY PREFERRED BCCH TRX,

=>ZERM:BTS= ,TRX= :PREF:N,


=>ZERM:BTS= ,TRX= :PREF:P,

*TO LOCK THE S/G & CHANGE THE BCCH,

=>ZWTC:DNAME:AD;
=>ZWTC:DNAME:WO;

*TO CHANGE GENA TO Y/N:

ZEQV:BTS= :GENA=Y/N;

You might also like