Scribd
Upload
54 views2 pages

Especificaciones Tecnicas Grupo Generador Electrogeno 1379009853026

This document provides information about 3M 61 tape, which is a PTFE film with silicone adhesive. The tape is 5 mil thick PTFE backing with a silicone thermosetting adhesive. It is used on high temperature coils, capacitors, and wire harnesses where high dielectric strength and breaking strength are required.

Uploaded by

Duvan Mauricio Osorio Gutiérrez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views2 pages

Especificaciones Tecnicas Grupo Generador Electrogeno 1379009853026

This document provides information about 3M 61 tape, which is a PTFE film with silicone adhesive. The tape is 5 mil thick PTFE backing with a silicone thermosetting adhesive. It is used on high temperature coils, capacitors, and wire harnesses where high dielectric strength and breaking strength are required.

Uploaded by

Duvan Mauricio Osorio Gutiérrez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

61 Tape

PTFE Film With Silicone Adhesive


Data Sheet

Product Description Applications


• 5.0-mil PTFE backing 3M 61 Tape is for use on high temperature coils,
• Silicone thermosetting adhesive
• Supplied on 3 inch cores capacitors and wire harnesses where high dielectric and
breaking strength are required.
Like all 3M insulating tapes, 3M 61 Tape is available in
standard and custom widths and lengths. Standard length
is 36 yards.

• Widths from 1/4” to 14”


• Longer lengths up to several times normal length,
dependent upon width. Check with Customer Service.

Properties Typical Values


Adhesive Silicone Thermosetting
Backing PTFE Film
1
Backing Thickness 5.0 Mil
Total Thickness 7.0 mils/0.178mm
Temperature Class 180°C /356°F
1
Dielectric Breakdown 15000 Volts
1
Insulation Resistance (megohms) >1 x 106
Breaking Strength1 45 lbs./in. (79 n/10mm)
1
Elongation (% at break) 300
2
Electrolytic Corrosion Factor 1.0
Adhesion to Steel1 35 oz./in. (3,8 n/10mm)
3
UL Flame Retardant Yes

* Footnote: 1. Test method ASTM D 1000


2. 3M Test Method-Available on request
3. UL-recognized for flame retardancy per UL 510, Product Category 0ANZ2, File E17385.
3M is a trademark of 3M.

Important Notice

All statements, technical information and recommendations The statements contained herein are made in lieu of all
related to the Seller’s products are based on information warranties, expressed or implied, including but not limited to
believed to be reliable, but the accuracy or completeness the implied warranties of merchantability and fitness for a
thereof is not guaranteed. Before utilizing the product, the particular purpose which warranties are hereby expressly
user should determine the suitability of the product for its disclaimed.
intended
use. The user assumes all risks and liability whatsoever in SELLER SHALL NOT BE LIABLE TO THE USER OR ANY
connection with such use. OTHER PERSON UNDER ANY LEGAL THEORY,
INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR
Any statements or recommendations of the Seller which are STRICT LIABILITY, FOR ANY INJURY OR FOR ANY
not contained in the Seller’s current publications shall have DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
no force or effect unless contained in an agreement signed CONSEQUENTIAL DAMAGES SUSTAINED OR
by an authorized officer of the Seller. INCURRED BY REASON OF THE USE OF ANY OF THE
SELLER’S PRODUCTS THAT WERE DEFECTIVE.

Electrical Products Division


6801 River Place Blvd.
Austin, TX 78726-9000
800 676 8381 © 3M 1998
http://www.3m.com/elpd 78-8124-4715-5

You might also like