CALIBRATION SYSTEMS

Design Your Own

Calibration Program

www.gagemaker.com
 CALIBRATION SYSTEMS CALIBRATION SYSTEMS
Inspect Parts, Calibrate and Track Gages Calibrate Hand Held Gages, and Preset Indicator Style Gages
In-House Precision Gage Calibration System Shop Floor Gage Setting & Part Measurement System
MIC TRAC 4000 Series MIC TRAC 3000 Series
• Delivers the highest accuracy in a controlled environment • Delivers high accuracy in a variety of enviroments including the shop floor
• Calibrates your ring and plug gages regularly with TDWIN thread calculation software • Serves as a setting master for gages produced by various manufacturers
• Produces computerized digital readouts, calibration reports and certificates • Provides fast, accurate dimensional part measurements
• Avoid calibration service “turnaround times” by having your own system in place • Calibrates hand-held gages in-house for faster turnaround
• Tracks & retrieves gage history, certifications, calibration dates and renewal • Ensures measurement repeatability from operator to operator using the optional
information Force Lok accessory
• Offers a huge variety of accessories for unmatched versatility in measurement
capabilities

Choosing the Right Calibration System

Step 1: Find what type of gages you have.
RG-7000 PD-8000 Calipers Depth Micrometers Indicators LG-5002 / LG-5003 TH-3000 PD-8000 Test Indicator Cylindrical Ring Threaded Plug Threaded Ring Cylindrical Plug Spline Gage Dial Bore Gage
Allen Lead Gage (Solid Only) (NPT)
OD OD
Micrometer Micrometer
Gages
& MRP
Micrometer
Upper Arm
Indicators Calipers Standard

for
Calibration ET-7000 ET-7000
PG-6000
IT-6000
IT-5000

Step 2: Determine which system you need.

MT-4000
(Accuracies to .00001”
(.254µ))
    
(>0.0001” Res.)
    
(>0.0001” Res.)
     
MT-3000
(Accuracies to .00002”          
(.508µ))
(>0.0005” Res.) (>0.0005” Res.)

Step 3: Locate the fixures and accessories necessary.

Cal-Pak Calibration Package Additional Calibration Accessories
Included with MT-4000 In-House Calibration System; can be purchased separately. These fixtures and accessories are not part of the CAL-PAK and must be purchased separately.

TF-1F TF-SA TF-CA TF-DG TF-IND TF-LG-2 TF-LG-3 TF-VB TF-SV TF-SS TF-CR TF-2R TF-IT TF-TP TF-SP TF-VN
(included in
the CAL-PAK)

Necessary
Fixtures &
Accessories
By Gage TF-SA to TF-1F TF-SA to TF-SS TF-1F TF-1F TF-1F TF-1F TF-1F MASTER
Support Support Long Required
(included in
the CAL-PAK) RING
Type RG-7000/ Calipers to Support
GAGE
PG-6000 for Extended 1-2-3 BLOCK TF-2R
Setting Probes
TF-TI BLOCKS
Required
with TF-SS 1-2-3 1-2-3 TF-1F
to Test TF-WH BLOCKS BLOCKS (included in
the CAL-PAK)
Indicator THREAD
Probes WIRES
INTERNAL
TF-SV TF-SS TF-TI GAGE BLOCK

www.gagemaker.com www.gagemaker.com
 CALIBRATION SYSTEMS
Calibration System Specifications
In-House Precision Gage Calibration
MIC TRAC 4000
• Accuracies to .00002” (.508 µ ) traceable to the NIST
• Ultra precision scale with 1.00” travel and resolution of .00001”
• Houses two precision optical glass scales enabling its precision measuring capability
• Includes receiver pads and anvils that are manufactured and precision ground to .00001”
• Adjustable electronic measurement master with ranges from 0” to 48”
• Provides critical thread dimensions for manufacturing & inspection using TDWIN Software
• Adjustable tilt support table to accommodate many applications
• Assortment of fixtures to hold various types of gages during calibration
• Documented calibration procedures for your lab
• Requires closely monitored environment held at 68°F with relative humidity not to exceed 50%
• Dell desktop computer and CERTIFI calibration software to produce calibration reports, recal
stickers, and gage usage history. Single user or network versions available

Shop Floor Gage Setting & Part Measurement System

MIC TRAC 3000
• Accuracy: ±.0001” (2.54μ) traceable to NIST
• Resolution of .00005”
• Digital readout provides measurement reading in inch or metric
• Durable construction allows use in practically any environment
• State of the art assembly of internal glass scale, precision linear bearing and a set of
precisely lapped measuring blocks
• Electronic adjustable measurement master with ranges from 0” to 12” (Units with up to
60” Ranges)
• Unique Force-Lok feature for measuring parts and improving repeatability from operator
to operator

Gagemaker Professional Calibration and

Repair Services
We Inspect, Calibrate, Repair, Track, and Certify Gages
and Calibration Equipment
• Clean and inspect your equipment for any visual damage
• Generate all necessary calibration certificates
• Inspect equipment following specific procedures developed per instrument
• Verify real accuracy and repeatability of the gage
• Return equipment to manufacturer specifications to maximize productivity

Gagemaker LP, • P.O. Box 87709, Houston, Texas 77287-7709

712 East Southmore Ave., Pasadena, Texas 77502
Phone: 713-472-7360 • Fax: 713-472-7241
Email: [email protected]
© 2013 Gagemaker, LP

www.gagemaker.com