Scribd
Upload
31 views

9-2 Engine System

This document provides information on mounting specifications for an engine system's group 2 components. It lists the engine and accessories mounting points and their required tightening torques. It also outlines the cooling system and fuel tank mounting, listing components like the fuel tank, radiator, oil cooler, and their mounting point sizes and tightening torque specifications.

Uploaded by

krisnanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

9-2 Engine System

This document provides information on mounting specifications for an engine system's group 2 components. It lists the engine and accessories mounting points and their required tightening torques. It also outlines the cooling system and fuel tank mounting, listing components like the fuel tank, radiator, oil cooler, and their mounting point sizes and tightening torque specifications.

Uploaded by

krisnanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GROUP 2 ENGINE SYSTEM

ENGINE AND ACCESSORIES MOUNTING

6 A
3

Muffler 2

6
3

1
4
2
6

Fan
A
3

Engine

4
3

1 1

Accel actuator
Air cleaner

3309S9CM01

·Tightening torque

Item Size kgf·m lbf·ft Item Size kgf·m lbf·ft


1 M 8×1.25 2.5±0.5 18.1±3.6 4 M12×1.75 12.8±3.0 92.6±21.7
2 M10×1.5 6.9±1.4 49.9±10.1 5 M14×2.0 9.8±0.9 70.8±6.5
3 M12×1.75 10.0±2.0 72.3±14.5 6 M24×3.0 90±7.0 651±51

9-2
COOLING SYSTEM AND FUEL TANK MOUNTING

4
Pre filter
Hyd tank 5
Air compressor 2

Fuel tank

Air con
idle pully 6

Air con
pully

7 7

9
9

3
Condenser
Screen
6 10
Needle
valve 7
Radiator 2
2 1

Oil cooler

Resevoir tank

6
6
7
8
Shroud
Fan guard

3309S9CM02

·Tightening torque
Item Size kgf·m lbf·ft Item Size kgf·m lbf·ft

1 M 6×1.0 0.5±0.2 3.6±1.45 6 M10×1.5 6.9±1.4 49.9±10.1


2 M 8×1.25 2.5±0.5 18.1±3.6 7 M12×1.75 12.8±3.0 92.6±21.7
3 M 8×1.25 1.3±0.2 9.4±1.45 8 M16×2.0 29.7±4.5 215±32.5
4 M 8×1.25 4.3±0.2 31.1±1.45 9 M20×2.5 57.9±8.7 419±62.9
5 M10×1.25 5.0±0.2 36.1±1.45 10 - 1.8±0.1 13.0±0.7

9-3

You might also like