1

INFO

info
Version 1.0
INFO INFO 1
Inquiry specification for control valves Inquiry Specification for Compensating Bypass Check Valves

In case of pump protection the SR/SA-type is Please transmit the following data for a particular The Compensating Bypass Check Valve is a pump pumps and plant data. Please transmit the following
highly associated with modern process control and valve design to: protection device. It automatically protects centrifu- data for a particular valve design to:
monitoring systems, as the minimum flow can Schroeder Valves GmbH & Co. KG gal pumps from damage which might occur through
be precisely adjusted to customers resp. plant Fax +49 (0) 2263-70121 partial evaporation of the pump contents during low Schroeder Valves GmbH & Co. KG
requirements. [email protected] load operation. Every Compensating Bypass Check Fax +49 (0) 2263-70121
Valve is designed particularly for the necessary [email protected]

Company: Project: Company: Project:

Name: Quantity: Name: Quantity:

Phone: Inquiry-No.: Phone: Inquiry-No.:

Fax: Date: Fax: Date:

1. Type of power SR SA Preferred company and type: 1. Non return valve in the bypass branch * no yes
1.1 electric 2. Installation * vertical horizontal
1.2 pneumatic 3. Variable Pump Speed * no yes
1.3 hydraulic
4. Medium *
1.4 medium conrolled (only SA)
5. Density * [kg/m3]
2. Accessories
6. Operating Temperature * [°C] [°F]
3. Technical Data 4. Preferred type 7. Standards * DIN ANSI Other
Pressure rate pD [bar] angle type
8. Max. Capacity Qmax [m3/h]
Temperature TD [°C] z-type
9. Design Capacity Q100% * [m3/h]
Medium straight through
10. Total Head at Q100% * [m]
Density [kg/m3]
11. Bypass Flow QBy * [m3/h]
5. Process data
12. Total Head at QBy * [m]
Loading condition I II III IV
13. Pump inlet pressure * [bar]
Flow rate Q [m3/h]
Inlet pressure pi [bar] 14. Back pressure on bypass branch [bar]

Outlet pressure po [bar] 15. Valve pressure rating

Differential pressure Δpmax [bar] 16. Valve Flange size / rating inlet outlet bypass
Inlet temperature Ti [°C] 17. Valve Flange sealing

6. Pipe connection 18. Additional branch yes, function

Flange DN Inlet 19. Pump curve attached no yes
Welding end DN Outlet
Others Material
Remarks / Specifications / Documentation / Inspections etc.:

Others / Comments / Specifications / Documentations, etc.:

* requested design data

INFO INFO 1
Comparison of economy

The Compensating Bypass Check Valves do not

only protect pumps from damages. Compared with a
constant bypass flow it improves the economy of the
plant. Example:

Process data Economy data

fluid, temperature water, 134 °C operating time p.a. 330 days per 24h
density in operat. temp. 0.93 kg/dm3 cost of energy 0.05 € / kWh
operating flow Q100% 63 m3/h
head in Q100% 288 m

Design data
pump data flow total head efficiency factor NPSHR
1 minimum flow QBy 12 m /h
3
325 m 0.38 1.7 m

2 operating flow Q100% 63 m3/h 288 m 0.73 2.4 m

minimum + operating flow
75 m3/h 288 m 0.76 3.1 m
QBy + Q100%

Required pump power and energy consumption Standards and Certifications

const. bypass flow with Schroeder bypass possible cost saving
check valve
pump power at minimum flow PQBy 26 kW 1 26 kW 1 – Our Special-Compensating Bypass Check Valves and All pressure holding parts of our products are built from
energy costs (p.a.)
10,300,- E 1 10,300,- E 1 –
our Multiport Throttles are designed according to the materials with a 3.1-certificate.
at minimum flow QBy
AD 2000 Standard (e.g. in calculation and choice of
pump power at operating flow PQ100% 72 kW 3 63 kW 2 9 kW
material). For all products you can get acc. to standard
energy costs (p.a.)
28,500,- E 3 24,900,- E 2 3,600,- E EN 10204
at operating flow Q100%
Valve SSV 10 50/40-50/50/25/0-1 price for this application appr. 1,900,- E The construction is according to specification AD 2000 • a Certificate of compliance with the order 2.1,
and particularly to EN 13445. As per Pressure Equip- • a Test report 2.2 or
ment Directive 97/23 EG the products are provided • an Inspection certificate 3.1
with the CE marking and the Declaration of Confor-
mity. Certified according to the Module H1 (Pressure Our company is certificated according to DIN 9001
Equipment Directive 97/23 EG) all dangerous material since 1995 and according to the new DIN EN ISO
classes of category 1 to 4 are covered. 9001:2000 since 2003.
 SSV 10-12
Special Compensating Bypass
Check Valve

look at info PN 10-PN 400 up to

2
overview ANSI 150-2500 p 250 bar
SS
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
The Compensating Bypass Check Valves of the All bypass valve components are easily serviced. SSV
range SSV 10 can be utilized for Δp up to 220 To facilitate serving of the bypass valve, we
10-12
bar, the type SSV 11 for Δp up to 250 bar and the recommend a removable flanged pipe approx. 1m
SSV 12 for Δp up to 40 bar with temperature long to be fitted to the bypass branch. We also
ranges from –250 °C up to +400 °C. The valves are recommend installing a pressure relieve valve and a
manufactured in the sizes DN 25 to DN 500 and the stop valve. The stop valve must be of a type which
range of nominal pressure is PN 10 up to PN 400 can be locked in the OPEN position.
(ANSI 150 - ANSI 2500). The bypass flow can be Illustration 1 shows a typical arrangement and flow
up to 50% of the main flow, recommended is up to scheme of our Compensating Bypass Check Valve. look at info
overview
35%. The hand-operated bypass feature is optional.
The valve operates without additional auxiliary In order to avoid vibrations in the valve and the
energy. pipes we recommend continuing the connecting line
For the protection of fluid pumps with delivery heads at the outlet (DN2) and Bypass branch (DN3) for bar

of above 2200 m we recommend the range SMA approx. 2-3 m in the chosen nominal size. A pipe
63/64 (see prospect) with „ON-OFF-regulation“ of bend directly at the bypass branch is not admissible. PN 10-PN 400
ANSI 150-2500
the bypass.

Mode of Operation
The Compensating Bypass Check Valve is flow
controlled, that means the non-return cone (3) is kept
up to
in its operating position by main flow only. The valve Δp 250 bar
is designed in such a way, that the cone reaches its
SSV 10-12 utmost upper position at denominated main flow.
(type with integrated throttles in the bypass) The non-return cone activates the Rotary Slide Valve
(13) in the bypass by means of a lever (14). If the
Range of Applications This is required for larger bypass flows up to 40 bar cone is positioned on the cone seat, the Rotary Slide
The Compensating Bypass Check Valve type SSV differential pressure. The choice is done in our works. Valve is completely open. It closes correspon-
10-12 is a pump protection device. It automatically The valve range SSV is utilized for fluids with a ding to the rising of the cone by delivery in main
protects centrifugal pumps – especially those viscosity < 150 cSt without solids, e.g.: direction. The valve just allows such an amount of
handling hot water – from damage which might bypass flow, as it is necessary for supplement of the
occur through partial evaporation of the water • in boiler feed water and cooling water plants required minimum flow of the pump.
content during low load operation. • in Petrochemical and Chemical Industry and As soon as the main flow exceeds the minimum
As soon as the pump capacity drops below a prede- refrigeration pump flow, the bypass closes. On the other hand
termined flow rate, the bypass valve opens suffici- • in potable water supply and backwater disposal the bypass opens again, when the main flow falls
ently to maintain the pump minimum flow rate. This • Offshore short of the bypass flow.
rate is maintained even if the flow through the main • in snow production
valve to the boiler or process is completely shut off. • in steel production Installation
The pressure will be reduced by integrated throttle • for fire fighting systems. Valves SSV should preferably be connected directly
stages within the bypass. The utilization in nuclear power plants emphasizes to the pump discharge branch, and must be mounted
The type SSV 12 is supplied with a larger Bypass. the reliability of these fittings (certified to KTA 1401). vertically with flow entry from below. Limited
possibilities for horizontal installation exist, but
must be confirmed by the manufacturer.
Illustration 1:
The bypass flow is piped back to the suction tank. Bypass Return with additional hand operated branch (optional).
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
Design The pressure reduction from pump pressure to the SSV
The construction is according to specification counter pressure in the bypass line takes place via
10-12
AD 2000 and particularly to EN 13445. As per the Bypass Valve Head (12) and the throttle (15), for
Pressure Equipment Directive 97/23 EG the products higher pressure with multistage throttles.
are provided with the CE marking and the Declara-
tion of Conformity. Certified according to the Modu- The hand operating branch with multiport-throttle is
le H1 (Pressure Equipment Directive 97/23 EG) all fitted at the casing below the cone seat and serves
dangerous material classes of category 1 to 4 are to pass off the minimum flow via a hand-operated
covered. Suitable nominal size and nominal pressure valve combination. We recommend the branch for look at info
overview
are to be chosen according to the pump pressure protection of the internal bypass parts at extreme
branch. However, it must be observed, that the operating conditions, e.g. at high differential pres-
admissible flow velocity of 10 m/s may not be sures and frequent operation in the range of bypass
exceeded (guarantee). Compensating Bypass Check flow as well as for filling and start-up of the plant. bar

Valves in larger sizes, for higher pressures and in

special designs, which are not listed here, can also Start-Up-Trim (SUT) substitutes the Bypass valve PN 10-PN 400
ANSI 150-2500
be supplied (on request). head during cleaning and start-up of plants and
Standard body material 1.0460 (P250GH)
If the bypass flow has been indicated too low, it may therefore spares the sophisticated regulating parts
result in vibrations within the plant, a hammering (optional, permanently open Bypass outlet). Also
Compensating Bypass Check Valve resp. a damage usable instead of the Hand operating branch SSV 10/12 with throttles in the bypass and hand-operated branch (optional)
of the Valve and the pump (see “inquiry specifica-
up to
tion“). Warm-up branch, pressure gauge branch, draining Parts List SSV 10/12 Spare/Wear Parts SSV 10/12 Δp 250 bar
branch etc. can be provided, if required.
Construction Flange designs to DIN, ANSI, BS, ISO and all rela- Lower body Part-No. 1 Bypass Valve Head, complete Part-No. 60, consisting of:
The Valve SSV comprises a radial split body with ted standards are possible. Upper body Part-No. 2 Casing Part-No. 12
non-return cone (3), and a separate bypass device Cone Part-No. 3 Rotary slide valve Part-No. 13
in the bypass branch. Furthermore we supply: Cone guide Part-No. 4 Operating lever Part-No. 14
All sliding parts are machined from proven stainless • Compensating Bypass Check Valves with control Cone guide Part-No. 5 Dowel pin Part-No. 94.1
steels suitably matched to each other. Parts subjects disc and bearing plate in the bypass for high Bypass branch Part-No. 10 Dowel pin Part-No. 94.2
to wear such as the check valve seat are stellite- bypass flows at low pump pressure Valve head casing Part-No. 12
faced. The coil springs are also made of stainless • Autonomous Minimum Flow System Type Rotary slide valve Part-No. 13 Throttle in the Bypass Branch, consisting of:
steel. In the standard version the casing is of forged SMA 63/64 from DN 65 up-wards at pump Operating lever Part-No. 14 Throttle Part-No. 15
steel P250GH (1.0460). In addition high-quality pressures from PN 250 - 400 bar. Throttle Part-No. 15 O-Ring Part-No. 78.2
steels of various qualities can be supplied. • Multiport throttles for pressure- and flow reduction Hand-op. branch Part-No. 24
of high-pressure media from DN 15 upwards and Multi-port throttle Part-No. 25 Single Spare Parts
In the Bypass the minimum flow is passed off auto- pressures from PN 10 to PN 640 bar. O-Ring Part-No. 78.1 O-Ring Part-No. 78.1
matically by the Bypass valve head (12). O-Ring Part-No. 78.2 Coil spring Part-No. 95.1
Socket screw Part-No. 91.1 (95.2)
Socket screw Part-No. 91.2
Dowel pin Part-No. 94.1
Dowel pin Part-No. 94.2
Coil spring Part-No. 95.1
(95.2)
Coil spring Part-No. 95.3

Materials according to operating conditions and valid standards.

SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
Dimensions and Weights of Valve Range SSV 10 - DIN Dimensions and Weights of Valve Range SSV 10 - DIN SSV
Nominal size CV Valve 1) Nominal size CV Valve 1) 10
DN1 PN 1-stage 2-stage 3-stage DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN 1-stage 2-stage 3-stage DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar mm
[USG/min] [USG/min] [USG/min] mm mm mm mm mm mm mm kg kg mm bar mm
[USG/min] [USG/min] [USG/min] mm mm mm mm mm mm mm kg kg
15 165 18 25 220 45
10-40 2.48 25 240 93 165 93 165 19 2 10-40 7.38 40 310 120 220 120 220 46 3
50 240 49
15 25 230 59
63 2.48 1.81 25 3 63 7.38 4.59 40 350 130 230 130 230 60 5
50 250 61
15 25 240 72 look at info
32 100 2.48 1.81 1.44 32 25 25 3 80 100 7.38 4.59 3.50 80 40 25 370 130 240 130 240 73 5 overview
50 260 77
15 25 240 72
160 25 3.5 160 5.57 4.04 3.23 40 370 130 240 130 240 73 6
50 260 74
15 25 250 102 bar

250 25 4.5 250 5.57 4.04 3.23 40 400 150 250 150 250 103 8
50 270 107
PN 10-PN 400
15 170 19 40 280 75
10-40 2.48 25 220 78 170 78 170 20 2 10-40 11.00 50 380 145 280 145 280 76 3
32 180 22 65 300 79
15 190 30 40 280 96
63 2.48 1.81 25 270 100 190 100 190 31 3 63 11.00 6.85 50 390 145 280 145 280 97 6
32 200 33 65 300 100
15 190 30 40 300 116
40 100 2.48 1.81 1.44 40 25 25 270 100 190 100 190 31 3 100 100 11.00 6.85 5.22 100 50 380 430 155 300 155 300 117 6
32 200 33 65 320 121 up to
15 190 30 40 300 116 Δp 220 bar
160 2.25 1.71 1.40 25 270 100 190 100 190 31 3.5 160 8.34 6.04 4.83 50 430 155 300 155 300 117 7
32 200 33 65 320 121
15 195 41 40 320 183
250 2.25 1.71 1.40 25 300 115 195 115 195 42 4.5 250 8.34 6.04 4.83 50 500 180 320 180 320 185 9
32 200 44 65 340 190
15 180 27 40 360 192
10-40 3.21 25 250 90 180 90 180 28 2 10-40 17.71 50 440 165 360 165 360 118 4
32 200 30 65 380 123
15 36 40 360 158
200
63 3.21 2.03 25 250 105 105 200 37 3 63 17.71 12.01 50 460 165 360 165 360 160 7
200
32 39 65 380 165
15 43 40 360 192
200
50 100 3.21 2.03 1.55 50 25 25 290 105 105 200 44 3 125 100 17.71 12.01 9.36 125 50 40 500 170 360 170 360 194 9
200
32 46 65 380 200
15 43 40 360 192
200
160 2.93 1.96 1.51 25 290 105 105 200 44 3.5 160 12.68 10.02 8.32 50 500 170 360 170 360 194 10
200
32 46 65 380 200
15 50 40 380 264
205
250 2.93 1.96 1.51 25 330 125 125 205 51 4.5 250 12.68 10.02 8.32 50 570 190 380 190 380 267 12
205
32 51 65 400 274
25 200 41 50 380 179
10-40 4.42 40 280 105 200 105 200 42 2 10-40 22.78 65 500 190 390 190 380 181 7
50 210 44 80 410 186
25 220 54 50 400 229
63 4.42 2.99 40 320 120 225 120 220 55 3 63 22.78 16.12 65 520 190 400 190 400 231 10
50 235 57 80 420 236
25 220 66 50 400 261
65 100 4.42 2.99 2.33 65 40 25 340 125 225 125 220 67 3 150 100 22.78 16.12 12.75 150 65 50 580 190 400 190 400 264 13
50 235 69 80 420 270
25 220 66 50 400 288
160 3.67 2.73 2.21 40 340 125 225 125 220 67 3.5 160 18.73 14.47 11.88 65 580 190 400 190 400 291 15
50 235 69 80 420 297
25 240 81 50 420 378
250 3.67 2.73 2.21 40 370 140 240 140 240 82 4.5 250 18.73 13.49 11.32 65 630 220 420 220 420 381 19
50 250 85 80 440 389
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
Dimensions and Weights of Valve Range SSV 10 - DIN SSV Dimensions and Weights of Valve Range SSV 10 - ANSI SSV
Nominal size CV Valve 1) 10 Nominal size CV Valve 1) 10
DN1 PN 1-stage 2-stage 3-stage DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN 1-stage 2-stage 3-stage DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar mm
[USG/min] [USG/min] [USG/min] mm mm mm mm mm mm mm kg kg inch lbs inch
[USG/min] [USG/min] [USG/min] inch inch mm mm mm mm mm kg kg
65 460 360 0.5˝ 165 18
10-40 55.42 80 630 240 470 240 460 364 10 150 2.48 1˝ 240 93 165 96 165 19 2
100 490 370
65 480 401 0.5˝ 170 26
63 55.45 30.47 80 650 240 480 240 480 403 14 300 2.48 1.81 1˝ 280 103 170 103 170 27 3
100 500 409
65 500 443 look at info 0.5˝ look at info
200 100 55.45 30.47 22.51 200 80 65 680 240 500 240 500 446 17 overview 1.25˝ 600 2.48 1.81 1.44 1.25˝ 1˝ 1˝ 29 3 overview
100 520 454
65 520 456 0.5˝
160 31.78 23.96 19.47 80 720 240 520 240 520 459 20 900 1˝ 37 3.5
100 540 467
65 590 700 bar 0.5˝ bar

250 21.47 18.50 16.18 80 830 265 590 265 590 704 27 1500 1˝ 40 4.5
100 610 714
PN 10-PN 400 ANSI 150-2500
80 520 658 0.5˝ 170 19
10-40 67.44 100 730 265 520 265 520 661 17 150 2.48 1˝ 220 78 170 78 170 19 2
125 540 667 1.25˝ 180 20
80 550 696 0.5˝ 170 27
63 67.44 45.06 100 760 265 550 265 550 699 22 300 2.48 1.81 1˝ 270 100 170 100 170 27 3
125 570 705 1.25˝ 180 28
80 590 784 0.5˝ 190 28
250 100 67.44 45.06 34.86 250 100 80 840 280 590 280 590 788 23 1.5˝ 600 2.48 1.81 1.44 1.5˝ 1˝ 1˝ 270 100 190 100 190 29 3
125 610 796 up to 1.25˝ 200 31 up to
80 590 810 Δp 220 bar 0.5˝ 200 36 Δp 220 bar
160 39.82 33.27 28.47 100 880 280 590 280 590 814 29 900 2.25 1.71 1.40 1˝ 320 125 200 125 200 37 3.5
125 610 822 1.25˝ 210 39
80 700 1234 0.5˝ 200 39
250 37.65 31.93 27.62 100 1050 340 700 340 700 1239 59 1500 2.25 1.71 1.40 1˝ 320 125 200 125 200 40 4.5
125 720 1249 1.25˝ 210 42
100 580 823 0.5˝ 180 27
10-40 100.27 125 860 320 580 320 580 826 20 150 3.21 1˝ 250 90 180 90 180 28 2
150 600 832 1.25˝ 190 29
100 640 881 0.5˝ 180 32
63 100.27 68.81 125 900 320 640 320 640 884 28 300 3.21 2.03 1˝ 270 100 180 100 180 33 3
150 660 890 1.25˝ 190 34
100 650 1113 0.5˝ 200 39
300 100 100.27 68.81 53.37 300 125 100 1050 330 650 330 650 1118 29 2˝ 600 3.21 2.03 1.55 2˝ 1˝ 1˝ 290 105 200 105 200 40 3
150 670 1126 1.25˝ 210 42
100 650 1113 0.5˝ 210 52
160 50.79 44.56 39.57 125 1050 330 650 330 650 1118 38 900 2.93 1.96 1.51 1˝ 325 125 210 125 210 53 3.5
150 670 1126 1.25˝ 220 55
100 740 2043 0.5˝ 210 61
250 50.79 44.56 39.57 125 1200 380 740 380 740 2051 75 1500 2.93 1.96 1.51 1˝ 350 135 210 135 210 62 4.5
150 760 2062 1.25˝ 220 64
1˝ 200 43
150 4.42 1.5˝ 280 105 200 105 200 44 2
1) Weight of hand-operating branch 2˝ 210 45
1˝ 200 51
Other pipe sizes, pressure ranges and special designs are deliverable on request. 300 4.42 2.99 1.5˝ 300 115 200 115 200 52 3
With reservation to changes of dimensions and weights. 2˝ 210 53
1˝ 220 62
2.5˝ 600 4.42 2.99 2.33 2.5˝ 1.5˝ 1˝ 340 125 225 125 220 64 3
2˝ 235 65
1˝ 230 75
900 3.67 2.73 2.21 1.5˝ 370 140 235 140 230 77 3.5
2˝ 245 79
1˝ 240 91
1500 3.67 2.73 2.21 1.5˝ 390 150 240 150 240 93 4.5
2˝ 250 96
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
Dimensions and Weights of Valve Range SSV 10 - ANSI Dimensions and Weights of Valve Range SSV 10 - ANSI SSV
Nominal size CV Valve 1) Nominal size CV Valve 1) 10
DN1 PN 1-stage 2-stage 3-stage DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN 1-stage 2-stage 3-stage DN2 DN3 DN4 L H S H1 S1 Weight G1
inch lbs inch
[USG/min] [USG/min] [USG/min] inch inch mm mm mm mm mm kg kg inch lbs inch
[USG/min] [USG/min] [USG/min] inch inch mm mm mm mm mm kg kg
1˝ 220 45 2.5˝ 460 360
150 7.38 1.5˝ 310 120 220 120 220 46 3 150 55.42 3˝ 630 240 470 240 460 362 10
2˝ 240 49 4˝ 490 368
1˝ 230 59 2.5˝ 480 390
300 7.38 4.59 1.5˝ 330 125 230 125 230 60 5 300 55.42 30.47 3˝ 650 240 480 240 480 392 14
2˝ 250 63 4˝ 500 398
1˝ 240 79 2.5˝ 500 442 look at info
3˝ 600 7.38 4.59 3.50 3˝ 1.5˝ 1˝ 370 130 240 130 240 80 5 8˝ 600 55.42 30.47 22.51 8˝ 3˝ 2.5˝ 680 240 500 240 500 445 17 overview
2˝ 260 84 4˝ 520 453
1˝ 240 84 2.5˝ 530 592
900 5.57 4.04 3.23 1.5˝ 390 140 240 140 240 85 6 900 31.78 23.96 19.47 3˝ 750 250 530 250 530 595 20
2˝ 260 89 4˝ 550 603
1˝ 250 116 2.5˝ 590 727 bar

1500 5.57 4.04 3.23 1.5˝ 430 160 255 160 250 117 8 1500 21.47 18.50 16.18 3˝ 880 295 590 295 590 730 27
2˝ 275 121 4˝ 610 740
ANSI 150-2500
1.5˝ 280 77 3˝ 520 646
150 11.00 2˝ 380 145 280 145 280 78 3 150 67.44 4˝ 730 265 520 265 520 648 17
2.5˝ 300 82 5˝ 540 654
1.5˝ 280 102 3˝ 530 690
300 11.00 6.85 2˝ 390 145 280 145 280 103 6 300 67.44 45.06 4˝ 750 270 530 270 530 692 22
2.5˝ 300 107 5˝ 550 698
1.5˝ 300 127 3˝ 590 795
4˝ 600 11.00 6.85 5.22 4˝ 2˝ 1.5˝ 430 155 300 155 300 128 6 10˝ 600 67.44 45.06 34.86 10˝ 4˝ 3˝ 840 280 590 280 590 800 23
2.5˝ 320 133 5˝ 610 808 up to
1.5˝ 300 154 3˝ 590 917 Δp 220 bar
900 8.34 6.04 4.83 2˝ 450 165 300 165 300 155 7 900 39.82 33.27 28.47 4˝ 900 290 590 290 590 922 29
2.5˝ 320 160 5˝ 610 930
1.5˝ 320 194 3˝ 700 1149
1500 8.34 6.04 4.83 2˝ 520 190 320 190 320 196 9 1500 37.65 31.93 27.62 4˝ 1100 370 700 370 700 1455 59
2.5˝ 340 202 5˝ 720 1465
1.5˝ 360 119 4˝ 590 816
150 17.71 2˝ 450 165 360 165 360 121 4 150 100.27 5˝ 860 320 590 320 580 818 20
2.5˝ 380 126 6˝ 600 842
1.5˝ 360 158 4˝ 600 879
300 17.71 12.01 2˝ 460 165 360 165 360 160 7 300 100.27 68.81 5˝ 880 320 600 320 600 881 28
2.5˝ 380 165 6˝ 620 887
1.5˝ 360 221 4˝ 650 1096
5˝ 600 17.71 12.01 9.36 5˝ 2˝ 1.5˝ 500 170 360 170 360 223 9 12˝ 600 100.27 68.81 53.37 12˝ 5˝ 4˝ 1050 330 650 330 350 1101 29
2.5˝ 380 229 6˝ 670 1110
1.5˝ 360 258 4˝ 650 1294
900 12.68 10.02 8.32 2˝ 530 185 370 185 360 261 10 900 50.79 44.56 39.57 5˝ 1050 330 650 330 650 1299 38
2.5˝ 390 268 6˝ 670 1308
1.5˝ 390 341 4˝ 740 1998
1500 12.68 10.02 8.32 2˝ 630 230 390 230 390 344 12 1500 50.79 44.56 39.57 5˝ 1250 410 740 410 740 2005 75
2.5˝ 410 351 6˝ 760 2016
2˝ 380 178
150 22.78 2.5˝ 500 190 380 190 380 179 7
3˝ 400 184 1) Weight of hand-operating branch
2˝ 400 224
300 22.78 16.12 2.5˝ 520 190 400 190 400 227 10 Other pipe sizes, pressure ranges and special designs are deliverable on request.
3˝ 420 333 With reservation to changes of dimensions and weights.
2˝ 400
273
6˝ 600 22.78 16.12 12.75 6˝ 2.5˝ 2˝ 580 190 400 190 400 13
27282
3˝ 420
2˝ 410 335
900 18.73 14.47 11.88 2.5˝ 600 200 420 200 410 337 15
3˝ 430 344
2˝ 420 410
1500 16.73 13.49 11.32 2.5˝ 700 260 420 260 420 413 19
3˝ 440 421
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
Dimensions and Weights of Valve Range SSV 12 - DIN Dimensions and Weights of Valve Range SSV 12 - DIN SSV
Nominal size CV Valve 1) Nominal size CV Valve 1) 12
DN1 PN 1-stage 2-stage DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN 1-stage 2-stage DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar mm
[USG/min] [USG/min] mm mm mm mm mm mm mm kg kg mm bar mm
[USG/min] [USG/min] mm mm mm mm mm mm mm kg kg
15 170 19 40 350 104
10-40 2.93 25 220 78 170 78 170 19 2 10-40 17.71 50 410 160 350 160 350 105 3
40 180 20 65 370 110
15 40 350 125
63 2.93 1.91 25 3 63 17.71 11.77 50 420 160 350 160 350 126 6
40 65 370 131
15 40 350 132 look at info
40 100 40 25 25 100 100 17.71 11.77 100 50 40 460 170 350 170 350 134 6 overview
40 65 370 140
15 40 350 132
160 25 160 17.71 11.77 50 480 170 350 170 350 134 7
40 65 370 140
15 40 bar

250 25 250 50
40 65
PN 10-PN 160
25 200 33 50 380 120
10-40 3.67 40 260 95 200 95 200 35 2 10-40 18.73 65 470 180 390 180 380 123 4
50 210 38 80 140 129
25 220 42 50
63 3.67 2.67 40 300 120 225 120 220 44 3 63 18.73 14.24 65
50 235 47 80
25 50
50 100 50 40 25 125 100 125 65 50
50 80 up to
25 50 Δp 40 bar
160 40 160 65
50 80
25 50
250 40 250 65
50 80
25 220 47 65 420 183
10-40 5.57 40 290 110 220 110 220 48 2 10-40 48.16 80 520 190 430 190 420 186 7
50 240 51 100 450 193
25 230 60 65
63 5.57 3.96 40 330 125 230 125 230 61 3 63 48.16 42.56 80
50 250 64 100
25 65 460 278
65 100 65 40 25 150 100 48.16 42.56 150 80 65 620 210 460 210 480 281 13
50 100 480 290
25 65 490 320
160 40 160 48.16 42.56 80 620 210 490 210 490 323 15
50 100 510 331
25 65
250 40 250 80
50 100
40 280 50 80 490 366
10-40 8.34 5.92 50 330 130 280 130 280 51 3 10-40 39.82 100 650 240 490 240 490 370 1
65 300 54 125 510 376
40 80 520 409
63 8.34 5.92 50 63 39.82 32.87 100 680 270 520 270 520 411 14
65 125 540 418
40 300 93 80
80 100 8.34 5.92 80 50 40 400 150 300 150 300 94 5 200 100 200 100 80
65 320 98 125
40 300 93 80
160 8.34 5.92 50 400 150 300 150 300 94 6 160 100
65 320 98 125
40 80
250 50 250 100
65 125
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
Dimensions and Weights of Valve Range SSV 12 - DIN SSV Dimensions and Weights of Valve Range SSV 12 - ANSI SSV
Nominal size CV Valve 1) 12 Nominal size CV Valve 1) 12
DN1 PN 1-stage 2-stage DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN 1-stage 2-stage DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar mm
[USG/min] [USG/min] mm mm mm mm mm mm mm kg kg inch lbs inch
[USG/min] [USG/min] inch inch mm mm mm mm mm kg kg
100 560 662 0.5˝ 170 19
10-40 53.25 125 750 270 560 270 560 664 17 150 2.93 1˝ 220 78 170 78 170 19 2
150 580 672 1.5˝ 180 20
100 0.5˝ 170 27
63 53.25 32.82 125 300 2.93 1.91 1˝ 270 100 170 100 170 27 3
150 1.5˝ 180 28
100 look at info 0.5˝ look at info
250 100 250 125 100 overview 1.5˝ 600 1.5˝ 1˝ 1˝ overview
150 1.5˝
100 0.5˝
160 125 900 1˝
150 1.5˝
100 bar 0.5˝ bar

250 125 1500 1˝

150 1.5˝
PN 10-PN 400 ANSI 150-900
125 580 830 1˝ 200 29
10-40 172.02 150 860 320 580 320 580 832 20 150 3.67 1.5˝ 250 90 200 90 200 30 2
200 600 842 2˝ 210 32
125 1˝ 200 35
63 172.02 80.39 150 300 3.67 2.67 1.5˝ 280 105 200 105 200 36 3
200 2˝ 210 38
125 1˝
300 100 300 150 125 2˝ 600 2˝ 1.5˝ 1˝
200 up to 2˝ up to
125 Δp 40 bar 1˝ Δp 40 bar
160 150 900 1.5˝
200 2˝
125 0.5˝
250 150 1500 1˝
200 1.25˝
1˝ 220 47
150 5.57 1.5˝ 290 110 220 110 220 48 2
1) Weight of hand-operating branch 2˝ 230 50
1˝ 230 55
Other pipe sizes, pressure ranges and special designs are deliverable on request. 300 5.57 3.96 1.5˝ 310 120 230 120 230 56 3
With reservation to changes of dimensions and weights. 2˝ 250 59
1˝
2.5˝ 600 2.5˝ 1.5˝ 1˝
2˝
1˝
900 1.5˝
2˝
0.5˝
1500 1˝
1.25˝
1.5˝ 280 50
150 8.34 5.92 2˝ 330 130 280 130 280 51 3
2.5˝ 300 55
1.5˝ 280 62
300 8.34 5.92 2˝ 350 135 280 135 280 63
2.5˝ 300 67
1.5˝ 300 85
3˝ 600 8.34 5.92 3˝ 2˝ 1.5˝ 390 140 300 140 300 86 5
2.5˝ 320 91
1.5˝ 300 105
900 8.34 5.92 2˝ 410 150 300 150 300 106 6
2.5˝ 320 111
1.5˝
1500 2˝
2.5˝
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
2
Dimensions and Weights of Valve Range SSV 12 - ANSI Dimensions and Weights of Valve Range SSV 12 - ANSI SSV
Nominal size CV Valve 1) Nominal size CV Valve 1) 12
DN1 PN 1-stage 2-stage DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN 1-stage 2-stage DN2 DN3 DN4 L H S H1 S1 Weight G1
inch lbs inch
[USG/min] [USG/min] inch inch mm mm mm mm mm kg kg inch lbs inch
[USG/min] [USG/min] inch inch mm mm mm mm mm kg kg
1.5˝ 350 104 4˝ 560 662
150 17.71 2˝ 410 160 350 160 350 106 3 150 53.25 5˝ 750 270 560 270 560 664 17
2.5˝ 370 111 6˝ 580 670
1.5˝ 350 108 4˝ 580 705
300 17.71 11.77 2˝ 420 160 350 160 350 110 6 300 53.25 32.82 5˝ 770 275 580 275 580 707
2.5˝ 370 115 6˝ 600 716
1.5˝ 360 132 4˝ look at info
4˝ 600 17.71 11.77 14˝ 2˝ 1.5˝ 460 170 360 170 360 134 6 10˝ 600 10˝ 5˝ 4˝ overview
2.5˝ 380 140 6˝
1.5˝ 4˝
900 17.71 11.77 2˝ 7 900 5˝
2.5˝ 6˝
1.5˝ 4˝ bar

1500 2˝ 1500 5˝
2.5˝ 6˝
ANSI 150-900
2˝ 370 125 5˝ 580 830
150 18.73 2.5˝ 480 180 370 180 370 127 4 150 172.02 6˝ 860 320 580 320 580 832 20
3˝ 390 132 8˝ 600 842
2˝ 390 164 5˝ 580 896
300 18.73 14.24 2.5˝ 500 180 390 180 390 166 300 172.02 80.39 6˝ 880 320 580 320 580 898
3˝ 410 171 8˝ 600 908
2˝ 5˝
5˝ 600 5˝ 2.5˝ 2˝ 12˝ 600 12˝ 6˝ 5˝
3˝ 8˝ up to
2˝ 5˝ Δp 40 bar
900 2.5˝ 900 6˝
3˝ 8˝
2˝ 5˝
1500 2.5˝ 1500 6˝
3˝ 8˝
2.5˝ 420 183
150 48.16 3˝ 520 190 430 190 420 185 7
4˝ 450 191 1) Weight of hand-operating branch
2.5˝ 440 229
300 48.16 42.56 3˝ 540 190 440 190 440 232 Other pipe sizes, pressure ranges and special designs are deliverable on request.
4˝ 460 238 With reservation to changes of dimensions and weights.
2.5˝ 460 287
6˝ 600 48.16 42.56 6˝ 3˝ 2.5˝ 620 210 460 210 460 281 13
4˝ 480 289
2.5˝ 500 340
900 48.16 42.56 3˝ 640 220 500 220 500 343 15
4˝ 520 351
2.5˝
1500 3˝
4˝
3˝ 490 368
150 39.82 4˝ 650 240 490 240 490 370 1
5˝ 510 376
3˝ 500 398
300 39.82 32.87 4˝ 690 260 500 260 500 400 14
5˝ 520 406
3˝
8˝ 600 8˝ 4˝ 3˝
5˝
3˝
900 4˝
5˝
3˝
1500 4˝
5˝
 SSV 18-20
Special Compensating Bypass
Check Valve
SS look at info
overview
PN 10-PN 400
ANSI 150-2500
up to
p 250 bar
3
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
The Compensating Bypass Check Valves of the All bypass valve components are easily serviced. SSV
range SSV 18 can be utilized for Δp up to 220 To facilitate serving of the bypass valve, we
18-20
bar, the type SSV 19 for Δp up to 250 bar and the recommend a removable flanged pipe approx. 1 m
SSV 20 for Δp up to 40 bar with temperature long to be fitted to the bypass branch. We also
ranges from –250°C up to +400°C. The valves are recommend to install a pressure relieve valve and a
manufactured in the sizes DN 25 to DN 500 and the stop valve. The stop valve must be of a type which
range of nominal pressure is PN 10 up to PN 400 can be locked in the OPEN position.
(ANSI 150 – ANSI 2500). The bypass flow can be up Illustration 1 shows a typical arrangement and flow
to 50% of the main flow, recommended is up scheme of our Compensating Bypass Check Valve. look at info
overview
to 35%. The hand-operated bypass feature is optional.
The valve operates without additional auxiliary In order to avoid vibrations in the valve and the
energy. pipes we recommend continuing the connecting line
For the protection of fluid pumps with delivery heads at the outlet (DN2) and Bypass branch (DN3) for bar

of above 2200 m we recommend the range SMA approx. 2-3 m in the chosen nominal size. A pipe
63/64 (see prospect) with „ON-OFF-regulation“ of bend directly at the bypass branch is not admissible. PN 10-PN 400
ANSI 150-2500
the bypass.

Mode of Operation
The Compensating Bypass Check Valve is flow
controlled, that means the non-return cone (3) is kept
up to
in its operating position by main flow only. The valve Δp 250 bar
is designed in such a way, that the cone reaches its
SSV 18-20 utmost upper position at denominated main flow.
(type with integrated non-return valve in the bypass) The non-return cone activates the Rotary Slide Valve
(13) in the bypass by means of a lever (14). If the
Range of Applications This is required for larger bypass flows up to 40 bar cone is positioned on the cone seat, the Rotary Slide
Compared to the series SSV 10-12, the series SSV differential pressure. The choice is done in our Valve is completely open. It closes corresponding to
18-20 uses an integrated non-return valve in the by- works. the rising of the cone by delivery in main direction.
pass. It automatically protects centrifugal pumps – The valve range SSV is utilized for fluids with a vis- The valve just allows such an amount of bypass flow,
especially those handling hot water – from damage cosity < 150 cSt without solids, e.g.: as it is necessary for supplement of the required
which might occur through partial evaporation of the • in boiler feed water and cooling water plants minimum flow of the pump.
water content during low load operation. • in Petrochemical and Chemical Industry and As soon as the main flow exceeds the minimum
As soon as the pump capacity drops below a prede- refrigeration pump flow, the bypass closes. On the other hand
termined flow rate, the bypass valve opens suffici- • in potable water supply and backwater disposal the bypass opens again, when the main flow falls
ently to maintain the pump minimum flow rate. This • Offshore short of the bypass flow.
rate is maintained even if the flow through the main • in snow production
valve to the boiler or process is completely shut off. • in steel production Installation
The pressure will be reduced by integrated throttle • for fire fighting systems. Valves SSV should preferably be connected directly
stages within the bypass. The utilization in nuclear power plants emphasizes to the pump discharge branch, and must be mounted
The type SSV 20 is supplied with a larger bypass. the reliability of these fittings (certified to KTA 1401). vertically with flow entry from below. Limited
possibilities for horizontal installation exist, but
must be confirmed by the manufacturer.
Illustration 1:
The bypass flow is piped back to the suction tank. Bypass Return with additional hand operated branch (optional).
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
Design reduction from pump pressure to the counter pressure SSV
The construction is according to specification in the bypass line takes place via the Bypass Valve
18-20
AD 2000 and particularly to EN 13445. As per Head (12), the throttle (16) and the valve (17) for
Pressure Equipment Directive 97/23 EG the products type SSV 18/20.
are provided with the CE marking and the Declaration
of Conformity. Certified according to the Module The hand operating branch with multiport-throttle is
H1 (Pressure Equipment Directive 97/23 EG) all fitted at the casing below the cone seat and serves
dangerous material classes of category 1 to 4 are to pass off the minimum flow via a hand-operated
covered. Suitable nominal size and nominal pressure valve combination. We recommend the branch for look at info
overview
are to be chosen according to the pump pressure protection of the internal bypass parts at extreme
branch. However, it must be observed, that the operating conditions, e.g. at high differential pres-
admissible flow velocity of 10 m/s may not be sures and frequent operation in the range of bypass
exceeded (guarantee). Compensating Bypass Check flow as well as for filling and start-up of the plant. bar

Valves in larger sizes, for higher pressures and in

special designs, which are not listed here, can also Start-Up-Trim (SUT) substitutes the Bypass valve PN 10-PN 400
ANSI 150-2500
be supplied (on request). head during cleaning and start-up of plants and
Standard body material 1.0460 (P250GH)
If the bypass flow has been indicated too low, it may therefore spares the sophisticated regulating parts
result in vibrations within the plant, a hammering (optional, permanently open Bypass outlet). Also
Compensating Bypass Check Valve resp. a damage usable instead of the Hand operating branch SSV 18-20 with non-return valve in the bypass and hand-operated branch (optional)
of the Valve and the pump (see “inquiry specifica-
up to
tion“). Warm-up branch, pressure gauge branch, draining Parts List SSV 18/20 Spare/Wear Parts SSV 18/20 Δp 250 bar
branch etc. can be provided, if required.
Construction Flange designs to DIN, ANSI, BS, ISO and all Lower body Part-No. 1 Bypass Valve Head, complete Part-No. 60 consisting of:
The Valve SSV comprises a radial split body with related standards are possible. Upper body Part-No. 2 Casing Part-No. 12
non-return cone (3), and a separate bypass device Cone Part-No. 3 Rotary slide valve Part-No. 13
in the bypass branch. Furthermore we supply: Cone guide Part-No. 4 Operating lever Part-No. 14
All sliding parts are machined from proven stainless • Compensating Bypass Check Valves with control Cone guide Part-No. 5 Dowel pin Part-No. 94.1
steels suitably matched to each other. Parts subjects disc and bearing plate in the bypass for high Bypass branch Part-No. 10 Dowel pin Part-No. 94.2
to wear such as the check valve seat are stellite- bypass flows at low pump pressure Valve head casing Part-No. 12
faced. The coil springs are also made of stainless • Autonomous Minimum Flow System Type Rotary slide valve Part-No. 13 Non-Return Valve in the Bypass Branch, complete, consisting of:
steel. In the standard version the casing is of SMA 63/64 from DN 65 up-wards at pump Operating lever Part-No. 14 Throttle Part-No. 16
forged steel P250GH (1.0460). In addition high- pressures from PN 250 – 400 bar. Throttle Part-No. 16 Non-Return Valve Part-No. 17
quality steels of various qualities can be supplied. • Multiport throttles for pressure- and flow reduction Non-Return Valve Part-No. 17 O-Ring Part-No. 78.2
of high-pressure media from DN 15 upwards and Hand-op. branch Part-No. 24 Coil spring Part-No. 95.3
In the Bypass the minimum flow is passed off automa- pressures from PN 10 to PN 640 bar. Multi-port throttle Part-No. 25
tically by the Bypass valve head (12). The pressure O-Ring Part-No. 78.1 Single Spare Parts
O-Ring Part-No. 78.2 O-Ring Part-No. 78.1
Socket screw Part-No. 91.1 O-Ring Part-No. 78.2
Socket screw Part-No. 91.2 Coil spring Part-No. 95.1
Coil spring Part-No. 95.1 (95.2)
(95.2) Coil spring Part-No. 95.3
Coil spring Part-No. 95.3

Materials according to operating conditions and valid standards.

SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
Dimensions and Weights of Valve Range SSV 18 - DIN Dimensions and Weights of Valve Range SSV 18 - DIN SSV
Nominal size Valve 1) Nominal size Valve 1) 18
DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar [USG/min] mm mm mm mm mm mm mm mm kg kg mm bar [USG/min] mm mm mm mm mm mm mm mm kg kg
15 180 20 25 205 41
10-40 2.30 2 220 78 170 78 170 20 2 10-40 3.87 40 280 105 205 105 205 42 2
50 215 44
15 190 30 25 220 53
63 2.30 25 270 100 190 100 190 31 3 63 3.87 40 320 120 225 120 225 55 3
50 235 58
15 190 30 25 220 65 look at info
25 100 2.30 25 25 25 270 100 190 100 190 31 3 65 100 3.87 65 40 40 340 125 225 125 225 67 3 overview
50 235 70
15 190 30 25 220 65
160 2.12 25 270 100 190 100 190 31 3.5 160 3.34 40 340 125 225 125 225 67 3.5
50 235 70
15 195 41 25 240 80 bar

250 2.12 25 300 115 195 115 195 42 4.5 250 3.34 40 370 140 240 140 240 82 4.5
50 250 86
PN 10-PN 400
15 180 20 25 245 48
10-40 2.30 25 220 78 170 78 170 20 2 10-40 6.45 40 310 120 230 120 230 46 3
50 250 50
15 190 30 25 245 62
63 2.30 25 270 100 190 100 190 31 3 63 6.45 40 350 130 230 130 230 60 5
50 250 64
15 190 30 25 250 74
32 100 2.30 32 25 25 270 100 190 100 190 31 3 80 100 6.45 80 40 40 370 130 240 130 240 73 5
50 260 78 up to
15 190 30 25 250 74 Δp 200 bar
160 2.12 25 270 100 190 100 190 31 3.5 160 5.14 40 370 130 240 130 240 73 6
50 260 78
15 195 41 25 255 103
250 2.12 25 300 115 195 115 195 41 4.5 250 5.14 40 400 150 250 150 250 103 8
50 270 108
15 180 20 40 280 75
10-40 2.30 25 220 78 170 78 170 20 2 10-40 9.67 50 380 145 280 145 280 76 3
32 180 22 65 300 80
15 190 30 40 280 96
63 2.30 25 270 100 190 100 190 31 3 63 9.67 50 390 145 280 145 280 97 6
32 200 33 65 300 101
15 190 30 40 300 116
40 100 2.30 40 25 25 270 100 190 100 190 31 3 100 100 9.67 100 50 50 430 155 300 155 300 117 6
32 200 33 65 320 122
15 190 30 40 300 116
160 2.12 25 270 100 190 100 190 31 3.5 160 7.72 50 430 155 300 155 300 117 7
32 200 33 65 320 122
15 195 41 40 320 184
250 2.12 25 300 115 195 115 195 42 4.5 250 7.72 50 500 180 320 180 320 185 9
32 205 44 65 340 191
15 190 28 50 360 116
10-40 2.86 25 250 90 180 90 180 28 2 10-40 15.91 65 440 165 360 165 360 118 4
32 190 30 80 380 122
15 200 36 50 360 158
63 2.86 25 280 105 200 105 200 37 3 63 15.91 65 460 165 360 165 360 160 7
32 210 39 80 380 165
15 200 43 50 360 192
50 100 2.86 50 25 25 290 105 200 105 200 44 3 125 100 15.91 125 65 50 500 170 360 170 360 194 9
32 210 46 80 380 200
15 200 43 50 360 195
160 2.65 25 290 105 200 105 200 44 3.5 160 11.96 65 500 170 360 170 360 197 10
32 210 46 80 380 203
15 205 50 50 380 265
250 2.65 25 330 125 205 125 205 51 4.5 250 11.96 65 570 190 380 190 380 267 12
32 215 53 80 400 274
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
Dimensions and Weights of Valve Range SSV 18 - DIN SSV Dimensions and Weights of Valve Range SSV 18 - ANSI SSV
Nominal size Valve 1) 18 Nominal size Valve 1) 18
DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar [USG/min] mm mm mm mm mm mm mm mm kg kg inch lbs [USG/min] inch inch inch mm mm mm mm mm kg kg
60 390 181 0.5˝ 180 19
10-40 23.13 80 500 190 395 190 390 184 7 150 2.30 1˝ 220 78 170 78 170 19 2
100 415 191
60 400 231 0.5˝ 180 27
63 23.13 80 520 190 405 190 400 234 10 300 2.30 1˝ 270 100 170 100 170 27 3
100 425 241
60 420 264 look at info 0.5˝ 190 28 look at info
150 100 23.13 150 80 65 580 190 420 190 420 266 13 overview 1˝ 600 2.30 1˝ 1˝ 1˝ 270 100 190 100 190 29 3 overview
100 440 274
60 420 291 0.5˝ 200 36
160 16.05 80 580 190 420 190 420 293 15 900 2.12 1˝ 320 125 200 125 200 37 3.5
100 440 301
60 420 381 bar 0.5˝ 200 39 bar

250 16.05 80 630 220 420 220 420 383 19 1500 2.12 1˝ 320 125 200 125 200 40 4.5
100 440 393
PN 10-PN 400 ANSI 150-2500
80 480 364 0.5˝ 170 19
10-40 44.84 100 630 240 480 240 480 366 10 150 2.30 1˝ 220 78 170 78 170 19 2
125 500 372
80 485 403 0.5˝ 180 27
63 44.84 100 650 240 485 240 485 405 14 300 2.30 1˝ 270 100 170 100 170 27 3
125 505 411
80 510 446 0.5˝ 190 28
200 100 44.84 200 100 80 680 240 520 240 510 451 17 1.25˝ 600 2.30 1.25˝ 1˝ 1˝ 270 100 190 100 190 29 3
125 540 459 up to up to
80 520 459 Δp 200 bar 0.5˝ 200 36 Δp 200 bar
160 20.96 100 720 240 535 240 520 464 20 900 2.12 1˝ 320 125 200 125 200 37 3.5
125 555 473
80 590 704 0.5˝ 200 39
250 20.96 100 830 265 590 265 590 707 27 1500 2.12 1˝ 320 125 200 125 200 40 4.5
125 610 717
100 560 661 0.5˝ 180 19
10-40 55.05 125 730 265 560 265 560 664 17 150 2.30 1˝ 220 78 170 78 170 19 2
150 580 672 1.25˝ 180 20
100 550 699 0.5˝ 180 27
63 55.05 125 760 265 550 265 550 702 22 300 2.30 1˝ 270 100 170 100 170 27 3
150 570 710 1.25˝ 180 28
100 590 788 0.5˝ 190 28
250 100 55.05 250 125 100 840 280 590 280 590 791 23 1.5˝ 600 2.30 1.5˝ 1˝ 1˝ 270 100 190 100 190 29 3
150 610 799 1.25˝ 200 31
100 590 814 0.5˝ 200 36
160 34.97 125 880 280 590 280 590 817 29 900 2.12 1˝ 320 125 200 125 200 37 3.5
150 610 826 1.25˝ 210 39
100 700 1239 0.5˝ 200 39
250 34.97 125 1050 340 700 340 700 1243 59 1500 2.12 1˝ 320 125 200 125 200 40 4.5
150 720 1253 1.25˝ 210 42
125 640 826 0.5˝ 190 28
10-40 81.85 150 860 320 640 320 640 829 20 150 2.86 1˝ 250 90 180 90 180 28 2
200 660 837 1.25˝ 190 29
125 640 884 0.5˝ 190 33
63 81.85 150 900 320 640 320 640 887 28 300 2.86 1˝ 270 100 180 100 180 33 3
200 660 895 1.25˝ 190 34
125 680 1118 0.5˝ 200 39
300 100 81.85 300 150 125 1050 330 680 330 680 1123 29 2˝ 600 2.86 2˝ 1˝ 1.5˝ 290 105 200 105 200 40 3
200 100 1133 1.25˝ 210 42
125 680 1118 0.5˝ 210 52
160 42.29 150 1050 330 680 330 680 1123 38 900 2.65 1˝ 325 125 210 125 210 53 3.5
200 700 1133 1.25˝ 220 55
125 740 2051 0.5˝ 210 61
250 42.29 150 1200 380 740 380 740 2056 75 1500 2.65 1˝ 350 135 210 135 210 62 4.5
200 760 2066 1.25˝ 220 64

1) Weight of hand-operating branch

Other pipe sizes, pressure ranges and special designs are deliverable on request.
With reservation to changes of dimensions and weights.
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
Dimensions and Weights of Valve Range SSV 18 - ANSI Dimensions and Weights of Valve Range SSV 18 - ANSI SSV
Nominal size Valve 1) Nominal size Valve 1) 18
DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1
inch lbs [USG/min] inch inch inch mm mm mm mm mm kg kg inch lbs [USG/min] inch inch inch mm mm mm mm mm kg kg
1˝ 205 43 2.5˝ 390 179
150 3.87 1.5˝ 280 105 205 105 205 44 2 150 23.13 3˝ 500 190 395 190 390 181 7
2˝ 215 45 4˝ 415 187
1˝ 205 51 2.5˝ 390 227
300 3.87 1.5˝ 300 115 205 115 205 52 3 300 23.13 3˝ 520 190 395 190 390 230 10
2˝ 215 53 4˝ 415 236
1˝ 220 62 2.5˝ 420 275 look at info
2.5˝ 600 3.87 2.5˝ 1.5˝ 1.5˝ 340 125 225 125 225 63 3 6˝ 600 23.13 6˝ 3˝ 2.5˝ 580 190 420 190 420 277 13 overview
2˝ 235 67 4˝ 440 284
1˝ 230 75 2.5˝ 420 337
900 3.34 1.5˝ 370 140 235 140 235 77 3.5 900 16.05 3˝ 600 200 420 200 420 339 15
2˝ 245 80 4˝ 440 346
1˝ 240 91 2.5˝ 420 413 bar

1500 3.34 1.5˝ 390 150 240 150 240 93 4.5 1500 16.05 3˝ 700 260 420 260 420 416 19
2˝ 250 97 4˝ 440 424
ANSI 150-2500
1.5˝ 245 48 3˝ 480 362
150 6.45 2˝ 310 120 230 120 230 46 3 150 44.84 4˝ 630 240 480 240 480 364 10
2.5˝ 250 50 5˝ 500 370
1.5˝ 245 62 3˝ 480 392
300 6.45 2˝ 330 125 230 125 230 60 5 300 44.84 4˝ 650 240 480 240 480 394 14
2.5˝ 250 64 5˝ 500 400
1.5˝ 250 81 3˝ 510 445
3˝ 600 6.45 3˝ 2˝ 1.5˝ 370 130 240 130 240 80 5 8˝ 600 44.84 8˝ 4˝ 3˝ 680 240 520 240 510 450 17
2.5˝ 260 84 5˝ 540 458 up to
1.5˝ 250 85 3˝ 520 595 Δp 200 bar
900 5.14 2˝ 390 140 245 140 245 85 6 900 20.96 4˝ 750 250 535 250 520 601 20
2.5˝ 265 89 5˝ 555 609
1.5˝ 255 117 3˝ 590 730
1500 5.14 2˝ 430 160 250 160 250 117 8 1500 20.96 4˝ 880 295 590 295 590 733 27
2.5˝ 270 121 5˝ 610 741
1.5˝ 280 77 4˝ 560 648
150 9.67 2˝ 380 145 280 145 280 78 3 150 55.05 5˝ 730 265 560 265 560 650 17
2.5˝ 300 82 6˝ 580 656
1.5˝ 280 102 4˝ 560 692
300 9.67 2˝ 390 145 280 145 280 103 6 300 55.05 5˝ 750 270 560 270 560 694 22
2.5˝ 300 107 6˝ 580 700
1.5˝ 300 126 4˝ 590 800
4˝ 600 9.67 4˝ 2˝ 2˝ 430 155 300 155 300 128 6 10˝ 600 55.05 10˝ 5˝ 4˝ 840 280 590 280 590 805 23
2.5˝ 320 133 6˝ 610 813
1.5˝ 300 152 4˝ 590 922
900 7.72 2˝ 450 165 310 165 310 155 7 900 34.67 5˝ 900 290 590 290 590 927 29
2.5˝ 320 159 6˝ 610 935
1.5˝ 320 192 4˝ 700 1455
1500 7.72 2˝ 520 190 320 190 320 196 9 1500 34.67 5˝ 1100 370 700 370 700 1461 59
2.5˝ 340 202 6˝ 720 1471
2˝ 360 121 5˝ 635 818
150 15.91 2.5˝ 450 165 360 165 360 123 4 150 81.85 6˝ 860 320 635 320 635 820 20
3˝ 380 128 8˝ 655 826
2˝ 370 160 5˝ 640 881
300 15.91 2.5˝ 480 165 360 165 370 161 7 300 81.85 6˝ 880 320 640 320 640 883 28
3˝ 380 166 8˝ 660 889
2˝ 360 223 5˝ 680 1101
5˝ 600 15.91 5˝ 2.5˝ 2˝ 500 170 360 170 360 225 9 12˝ 600 81.85 12˝ 6˝ 5˝ 1050 330 680 330 680 1106 29
3˝ 380 231 8˝ 700 1115
2˝ 370 261 5˝ 680 1299
900 11.96 2.5˝ 530 185 375 185 370 264 10 900 42.29 6˝ 1050 330 680 330 680 1304 38
3˝ 395 271 8˝ 700 1313
2˝ 390 344 5˝ 740 2005
1500 11.96 2.5˝ 630 230 390 230 390 346 12 1500 42.29 6˝ 1250 410 740 410 740 2012 75
3˝ 410 353 8˝ 760 2024

1) Weight of hand-operating branch

Other pipe sizes, pressure ranges and special designs are deliverable on request.
With reservation to changes of dimensions and weights.
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
Dimensions and Weights of Valve Range SSV 20 - DIN SSV Dimensions and Weights of Valve Range SSV 20 - DIN SSV
Nominal size Valve 1) 20 Nominal size Valve 1) 20
DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar [USG/min] mm mm mm mm mm mm mm mm kg kg mm bar [USG/min] mm mm mm mm mm mm mm mm kg kg
15 180 20 50 350 108
10-40 2.86 25 220 78 170 78 170 20 2 10-40 15.91 65 410 160 350 160 350 109 5
32 180 21 80 370 113
15 190 30 50 350 129
63 2.86 25 270 100 190 100 190 31 3 63 15.91 65 420 160 350 160 350 130 6
32 200 32 80 370 134
15 look at info 50 350 136 look at info
40 100 40 25 25 overview 100 100 15.91 100 65 50 460 170 350 170 350 137 6 overview
35 80 370 141
15 50 350 136
160 25 160 65 460 170 350 170 350 137 6
35 80 370 141
15 bar 50 bar

250 25 250 65
35 80
PN 10-PN 400 PN 10-PN 400
25 205 33 ANSI 150-2500 65 380 120 ANSI 150-2500
10-40 3.87 40 260 95 205 95 205 35 2 10-40 23.13 80 470 180 385 180 380 122 7
50 215 38 100 405 128
25 220 43 65 390 197
63 3.87 40 300 120 225 120 225 45 3 63 23.13 80 490 180 395 180 390 200 8
50 235 48 100 415 207
25 65
50 100 3.87 50 40 40 125 100 125 80 40
50 up to 100 up to
25 Δp 40 bar 65 Δp 40 bar
160 40 160 80
50 100
25 65
250 40 250 80
50 100
25 245 51 80 440 187
10-40 6.45 40 290 110 230 110 230 49 2 10-40 46.79 100 520 190 440 190 440 188 7
50 250 52 125 460 195
25 245 59 80 445 240
63 6.45 40 330 125 230 125 230 61 3 63 46.79 100 550 200 445 200 445 242 10
50 250 64 125 465 249
25 80 470 276
65 100 65 40 40 150 100 46.79 150 100 80 620 210 480 210 470 279 13
50 125 500 287
25 80 480 338
160 40 160 46.79 100 620 210 495 210 480 343 15
50 125 515 352
25 80
250 40 250 100
50 125
40 280 51 100 530 390
10-40 9.67 50 330 130 280 130 280 52 5 10-40 33.33 125 650 240 530 240 530 393 10
65 300 56 150 550 402
40 100 520 449
63 9.67 50 63 33.33 125 670 240 520 240 520 451 14
65 150 540 460
40 300 93 100 560 517
80 100 9.67 80 50 50 400 150 300 150 300 94 6 200 100 200 125 100 720 260 560 260 560 520 20
65 320 98 150 580 532
40 300 93 100 560 540
160 9.67 50 400 150 300 150 300 94 6 160 125 760 260 560 260 560 543 20
65 320 98 150 580 555
40 100
250 50 250 125
65 150
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
Dimensions and Weights of Valve Range SSV 20 - DIN SSV Dimensions and Weights of Valve Range SSV 20 - ANSI SSV
Nominal size Valve 1) 20 Nominal size Valve 1) 20
DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1
mm bar [USG/min] mm mm mm mm mm mm mm mm kg kg inch lbs [USG/min] inch inch inch mm mm mm mm mm kg kg
125 620 671 0.5˝ 180 19
10-40 50.56 150 750 270 620 270 620 673 20 150 2.86 1˝ 220 78 170 78 170 19 2
200 640 683 1.25˝ 180 20
125 620 712 0.5˝ 180 27
63 50.56 150 750 270 620 270 620 715 23 300 2.86 1˝ 270 100 170 100 170 27 3
200 640 726 1.25˝ 180 28
125 look at info 0.5˝ look at info
250 100 250 150 125 overview 1.5˝ 600 1.5˝ 1˝ 1˝ overview
200 1.25˝
125 0.5˝
160 150 900 1˝
200 1.25˝
125 bar 0.5˝ bar

250 150 1500 1˝

200 1.25˝
PN 10-PN 400 ANSI 150-900
150 ANSI 150-2500 1˝ 205 31
10-40 200 150 3.87 1.5˝ 250 90 205 90 250 32 2
250 2˝ 215 34
150 1˝ 205 38
63 200 300 3.87 1.5˝ 280 105 205 105 205 39 3
250 2˝ 215 41
150 1˝ 220 42
300 100 300 200 150 2˝ 600 3.87 2˝ 1.5˝ 1.5˝ 310 120 225 120 225 44 3
250 up to 2˝ 235 47 up to
150 Δp 40 bar 1˝ Δp 40 bar
160 200 900 1.5˝
250 2˝
150 1˝
250 200 1500 1.5˝
250 2˝
1˝ 245 53
150 6.45 1.5˝ 290 110 230 110 230 51 2
2˝ 250 54
1˝ 245 58
300 6.45 1.5˝ 310 120 230 120 230 56 3
2˝ 250 59
1˝
2.5˝ 600 2.5˝ 1.5˝ 1.5˝
2˝
1˝
900 1.5˝
2˝
1˝
1500 1.5˝
2˝
1.5˝ 280 50
150 9.67 2˝ 330 130 280 130 280 51 3
2.5˝ 300 55
1.5˝ 280 62
300 9.67 2˝ 350 135 280 135 280 63 5
2.5˝ 300 67
1.5˝ 240 85
3˝ 600 9.67 3˝ 2˝ 2˝ 390 140 240 140 240 86 5
2.5˝ 260 91
1.5˝ 300 105
900 9.67 2˝ 410 150 310 150 310 106 6
2.5˝ 320 111
1.5˝
1500 2˝
2.5˝
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
3
Dimensions and Weights of Valve Range SSV 20 - ANSI Dimensions and Weights of Valve Range SSV 20 - ANSI SSV
Nominal size Valve 1) Nominal size Valve 1) 20
DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1 DN1 PN CV DN2 DN3 DN4 L H S H1 S1 Weight G1
inch lbs [USG/min] inch inch inch mm mm mm mm mm kg kg inch lbs [USG/min] inch inch inch mm mm mm mm mm kg kg
2˝ 350 106 5˝ 620 677
150 15.91 2.5˝ 410 160 350 160 350 107 3 150 50.56 6˝ 750 270 620 270 620 680 17
3˝ 370 111 8˝ 640 691
2˝ 360 110 5˝ 726
620
300 15.91 2.5˝ 420 160 360 160 360 111 6 300 50.56 6˝ 770 275 275 620 729 22
620
3˝ 380 115 8˝ 740
2˝ 360 134 5˝ look at info
4˝ 600 15.91 4˝ 2.5˝ 2˝ 460 170 360 170 360 135 6 10˝ 600 10˝ 6˝ 5˝ overview
3˝ 380 140 8˝
2˝ 5˝
900 2.5˝ 900 6˝
3˝ 8˝
2˝ 5˝ bar

1500 2.5˝ 1500 6˝

3˝ 8˝
ANSI 150-900
2.5˝ 380 127 6˝
150 23.13 3˝ 480 180 385 180 380 129 4 150 8˝
4˝ 405 134 10˝
2.5˝ 380 166 6˝
300 23.13 3˝ 500 180 385 180 380 168 7 300 8˝
4˝ 405 173 10˝
2.5˝ 6˝
5˝ 600 5˝ 3˝ 2.5˝ 12˝ 600 12˝ 8˝ 6˝
4˝ 10˝ up to
2.5˝ 6˝ Δp 40 bar
900 3˝ 900 8˝
4˝ 10˝
2.5˝ 6˝
1500 3˝ 1500 8˝
4˝ 10˝
3˝ 440 185
150 46.79 4˝ 520 190 440 190 440 186 7
5˝ 460 193 1) Weight of hand-operating branch
3˝ 440 232
300 46.79 4˝ 540 190 440 190 440 233 10 Other pipe sizes, pressure ranges and special designs are deliverable on request.
5˝ 460 241 With reservation to changes of dimensions and weights.
3˝ 470 281
6˝ 600 46.79 6˝ 4˝ 3˝ 620 210 480 210 470 284 13
5˝ 500 292
3˝ 490 343
900 46.79 4˝ 640 220 505 220 490 348 15
5˝ 525 357
3˝
1500 4˝
5˝
4˝ 530 387
150 33.33 5˝ 650 240 530 240 530 380 10
6˝ 550 389
4˝ 408
530
300 33.33 5˝ 690 280 260 530 410 14
530
6˝ 419
4˝
8˝ 600 8˝ 5˝ 4˝
6˝
4˝
900 5˝
6˝
4˝
1500 5˝
6˝
 SSV 40-49
Special Compensating Bypass
SS Check Valve

look at info
overview
PN 10-PN 100
ANSI 150-600
up to
Δp 80 bar
4
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
4
SSV
40-49

look at info
overview

SSV 40-49 (with control disc and bearing plate)

Range of applications Mode of Operation bar

The Compensating Bypass Check Valve type SSV The Compensating Bypass Check Valve with control
40 to 49 is a pump protection device. Based on the disc and bearing plate works flow controlled, that PN 10-PN 100
Standard body material 1.0460 (P250GH) ANSI 150-600
SSV 10 to 20 series it was especially designed for means the non-return cone (3) is kept in his operating
centrifugal pumps with high bypass flow and low position by main flow only. The valve is designed in
pressure load. such a way, that the cone reaches its utmost upper SSV 40-49 with control disc and bearing plate
Therefore up to 65% of the nominal pump flow can position at denominated main flow.
be delivered through the bypass as minimum flow. The non-return cone (3) activates the control disc (37) Parts List Spare Parts
(with Type SSV 10 to 20 approx. 35% nominal pump in the bypass by means of the lever (32). If the cone up to
Δp 80 bar
flow is recommended). The max. bypass flow values is positioned on the cone seat, the control disc (37) is Lower body Part-No. 1 Control disc complete, consisting of:
QBy can be gathered from table 1. completely open. It closes corresponding to the rising Upper body Part-No. 2 Control disc Part-No. 37
The SSV 40 to 49 valves normally are manufactured of the cone by delivery in main direction. The valve Cone complete Part-No. 3 Bearing plate Part-No. 38
in the sizes DN 50 to DN 600 (resp. NVS 2” to NVS just allows such an amount of bypass flow, as it is Cone guide Part-No. 4 Dowel pin Part-No. 94.3
24”). Other sizes are deliverable on request. For de- necessary for supplement of the required minimum Cone guide Part-No. 5
sign reasons the pressure loss ΔpBy at the bypass flow of the pump. As soon as the main flow exceeds Bypass-branch Part-No. 30 Single Spare Parts
is limited to approx. 80 bar. Other operating limits the minimum pump flow, the bypass closes. On the Adapter Part-No. 31 Coil spring Part-No. 95.1
and application ranges are equal to the SSV 10 to other hand the bypass opens again, when the main Lever Part-No. 32
20 series. flow falls short of the bypass flow. Toothed segment Part-No. 33
Bearing pin Part-No. 34
Pin cover plate Part-No. 35
Nominal sizes Specific values Carrier plate Part-No. 36
Valve Body Bypass- Valve Body Bypass- Control disc Part-No. 37
branch branch
Bearing plate Part-No. 38
DIN ANSI
Throttle Part-No. 40
Typ DN DN3 DN DN3 KV CV Stud bolt Part-No. 90.1
mm mm inch inch [m3/h] [USG/min]
SSV 40 50-80 25-40 2˝-3˝ 1˝-1.5˝ 10.50 12.29
Eye bolt Part-No. 90.2
SSV 41 80-125 40-50 3˝-5˝ 1.5˝-2˝ 21.00 24.57 Socket screw Part-No. 91.1
SSV 42 100-150 65-80 4˝-6˝ 2.5˝-3˝ 42.00 49.14
Socket screw Part-No. 91.2
SSV 43 150-250 100-125 6˝-10˝ 4˝-5˝ 80.00 93.60
SSV 44 200-400 125-150 8˝-16˝ 5˝-6˝ 120.00 140.40 Cap nut Part-No. 92
SSV 45 250-400 125-150 10˝-16˝ 5˝-6˝ 172.00 201.24 Dowel pin Part-No. 94.1
SSV 46 300-500 150-250 12˝-18˝ 6˝-10˝ 240.00 280.80
SSV 47 350-600 200-300 14˝-20˝ 8˝-12˝ 350.00 409.50
Dowel pin Part-No. 94.2
SSV 48 350-600 250-350 14˝-20˝ 10˝-14˝ 502.00 587.34 Dowel pin Part-No. 94.3
SSV 49 400-600 350-400 16˝-20˝ 14˝-16˝ 780.00 912.60
Coil spring Part-No. 95.1

Materials according to operating conditions and valid standards.

 SSV 70-79
SS Special Compensating Bypass
Check Valve

look at info PN 10-PN 100 up to

5
overview ANSI 150-600 Δp 80 bar
SSV
Special Compensating Bypass Check Valve
SSV
Special Compensating Bypass Check Valve
5
SSV
70-79

look at info
overview

SSV 70-79 (with control disc complete and non-return valve in bypass)

Range of applications Mode of Operation bar

The Compensating Bypass Check Valve type SSV The Compensating Bypass Check Valve with control
70 to 79 is a pump protection device. In addition to disc and bearing plate works flow controlled, that PN 10-PN 100
Standard body material 1.0460 (P250GH) ANSI 150-600
the SSV 40-49 series the SSV 70-79 series uses a means the non-return cone (3) is kept in his operating
non-return valve in the bypass. Based on the SSV position by main flow only. The valve is designed in
10 to 20 series it was especially designed for centri- such a way, that the cone reaches its utmost upper SSV 70-79 (with control disc complete and non-return valve in bypass)
fugal pumps with high bypass flow and low pressure position at denominated main flow.
load. Therefore up to 65% of the nominal pump flow Parts List Spare Parts
can be delivered through the bypass as minimum The non-return cone (3) activates the control disc (37) up to
Δp 80 bar
flow. (with Type SSV 10 to 20 approx. 35% nominal in the bypass by means of the lever (32). If the cone Lower body Part-No. 1 Control disc complete, consisting of:
pump flow is recommended). The max. bypass flow is positioned on the cone seat, the control disc (37) Upper body Part-No. 2 Control disc Part-No. 37
values QBy can be gathered from table 1. is completely open. It closes corresponding to the Cone complete Part-No. 3 Bearing plate Part-No. 38
The SSV 70 to 79 valves normally are manufactured rising of the cone by delivery in main direction. The Cone guide Part-No. 4 Dowel pin Part-No. 94.3
in the sizes DN 50 to DN 600 (resp. NVS 2” to NVS valve just allows such an amount of bypass flow, as is Cone guide Part-No. 5 Throttle Part-No. 16
24”). Other sizes are deliverable on request. For necessary for supplement of the required minimum Bypass-branch Part-No. 30 Non-return valve Part-No. 17
design reasons the pressure loss DpBy at the flow of the pump. As soon as the main flow exceeds Adapter Part-No. 31
bypass is limited to approx. 80 bar. Other operating the minimum pump flow, the bypass closes. On the Lever Part-No. 32 Single Spare Parts
limits and application ranges are equal to the SSV other hand the bypass opens again, when the main Toothed segment Part-No. 33 Coil spring Part-No. 95.1
10 to 20 series. flow falls short of the bypass flow. Bearing pin Part-No. 34 Coil spring Part-No. 95.3
Pin cover plate Part-No. 35
Nominal sizes Specific values Carrier plate Part-No. 36
Valve Body Bypass- Valve Body Bypass- Control disc Part-No. 37
branch branch
Bearing plate Part-No. 38
DIN ANSI
Throttle Part-No. 40
Typ DN DN3 DN DN3 Kv Cv Socket screw Part-No. 90.1
mm mm inch inch [m3/h] [USG/min]
SSV 70 50-80 25-40 2˝-3˝ 1˝-1.5˝ 8,00 9.36
Eye bolt Part-No. 90.2
SSV 71 80-125 40-50 3˝-5˝ 1.5˝-2˝ 17,40 20.36 Socket screw Part-No. 91.1
SSV 72 100-150 65-80 4˝-6˝ 2.5˝-3˝ 32,30 37.67
Socket screw Part-No. 91.2
SSV 73 150-250 100-125 6˝-10˝ 4˝-5˝ 60,60 70.90
SSV 74 200-400 125-150 8˝-16˝ 5˝-6˝ 90,00 105.30 Cap nut Part-No. 92
SSV 75 250-400 125-150 10˝-16˝ 5˝-6˝ 129,00 150.93 Dowel pin Part-No. 94.1
SSV 76 300-500 150-250 12˝-18˝ 6˝-10˝ 180,00 210.60
SSV 77 350-600 200-300 14˝-20˝ 8˝-12˝ 262,50 307.13
Dowel pin Part-No. 94.2
SSV 78 350-600 250-350 14˝-20˝ 10˝-14˝ 376,50 440.51 Dowel pin Part-No. 94.3
SSV 79 400-600 350-400 16˝-20˝ 14˝-16˝ 585,00 684.45
Coil spring Part-No. 95.1

Materials according to operating conditions and valid standards.

 SMV
SM Multifunction Valve

look at info
overview
PN 10-PN 400
ANSI 150-2500
up to
Δp 250 bar

6
SMV
Multifunction Valve
SMV
Multifunction Valve
6
When the pump is stopped, the degasification perature engineering, fuel depot engineering, and SMV
device opens because of the dropping differential in the shipping of liquefied gases. The Multifunction
10-12
pressure, so that developed gas, e.g. by after-heat Valve can be used in all pump plants delivering
18/20
in the pump system, will be passed off immediately fluids near the boiling point, two-phase-mixtures,
and effectively. The pump remains filled with fluid for gaseous media and for pumps which are – because
the next start or automatic re-start. of modern sealing systems or similar devices –
equipped with gas-injections.
Innovation as Challenge Also, the Multifunction Valve SMV will protect split
The Multifunction Valve SMV is a product innovation, cage motor pumps (non-seal pumps) and magnetic look at info
overview
created with the purpose of eliminating problems, pumps from dry operation.
known from day-to-day practice. This valve improves
plant security and availability through combining Design
vital functions at competitive prices. The combined The design is according to standard AD 2000 and bar

Illustration SMV 18)

pump protection is achieved by assuring the particulary to EN 13445. As required by Pressure
minimum flow regulation and non-return function Equipment Directive (PED) 97/23/EG the products PN 10-PN 400
ANSI 150-2500
in the main delivery stream with the Automatic- are supplied with CE Marking and Declaration of
SMV 10-20 with degasification branch for liquid gas applications
Degasification. Conformity.
SMV 10-12 with bypass throttle Certified to module H1 all dangerous classes of
SMV 18-20 with bypass non-return valve Application category 1 to 4 are covered. Otherwise installation,
The main application area is in the process enginee- mode of operation and construction are as for Type
Requirements in practice Function of the Automatic-Degasification up to
ring of technical liquefied gases, especially low tem- SSV 10-20. Δp 250 bar
Observations and case studies from practical applica- The Automatic-Degasification integrated in the
tions prove the need for the Schroeder Multifunction Schroeder Multifunction Valve provides a continuous
Valve. degasification of the stopped pump and the reserved
Operation breakdowns, damages and other pro- pump, and secures a constant filling with the
Illustration 1: Delivery of easily boiling fluids
blems, caused by dry pump operation have often delivery fluid.
been observed in fluid gas plants as well as in pump
stations of fuel depots. These problems mostly Mode of Operation
occured during times of start-up and re-starts of The Schroeder Multifunction Valve SMV is installed
pumps. near the pressure connection. Due to the elevated
position a geodetical high reference point is formed
In case of fluid gases in the boiling point, the transfor- below the non-return cone on the pump pressure side
mation of fluid into gas occurs by a minor tempera- in main stream direction. During the dwell period of the
ture increase in the stopped pump. This gas volume machine, the resulting gas is collected in the region of
then presses the fluid out of the pump towards the this high reference point. The Automatic-Degasification
suction pipe. This results in the pump filling up partly of the Multifunction Valve is automatically kept in open
or totally with gas. This can be caused by the tem- position, when the pump is not working. Thus a con-
perature influence from outside as well as from the tinuous degasification is provided and the pump is
after-heat of the pump immediately after disconnec- always filled completely with delivery fluid.
tion. Depending on the pump type it will become
completely dry or filled up with gas in a way, that the In the case of fluid gas pumps in low temperature service
impellers cannot build up delivery pressure when the machinery is constantly kept in a cold state and
the pump is re-started. Thus the pump operates is prepared for a secure start or re-start. Immediately
dry and seconds later considerable damages occur, after start-up the pump produces the required diffe
possibly leading to destruction of the pump and rential pressure, and the automatic degasification of
environment. the SMV Valve shuts the degasification line tightly.
SMV
Multifunction Valve
SMV
Multifunction Valve
6
SMV
18/20

look at info
overview

bar

PN 10-PN 400
ANSI 150-2500

Illustration 2: SMV 10 cross sectional view Illustration 3: SMV 18 cross sectional view

SMV 10-12 with throttles in the bypass and automatic degassing branch SMV 18/20 with non-return valve in the bypass and
automatic degassing branch up to
Δp 250 bar
Parts List SMV 10-12 Spare/Wear Parts SMV 10/12 Parts List SMV 18/20 Spare/Wear Parts SMV 18/20

Lower body Part-No. 1 Bypass Valve Head, complete, Part-No. 60 consisting of: Lower body Part-No. 1 Bypass Valve Head, complete Part-No. 60 consiting of:
Upper body Part-No. 2 Casing Part-No. 12 Upper body Part-No. 2 Casing Part-No. 12
Cone Part-No. 3 Rotary slide valve Part-No. 13 Cone Part-No. 3 Rotary slide valve Part-No. 13
Cone guide Part-No. 4 Operating lever Part-No. 14 Cone guide Part-No. 4 Operating lever Part-No. 14
Cone guide Part-No. 5 Dowel pin Part-No. 94.1 Cone guide Part-No. 5 Dowel pin Part-No. 94.1
Bypass branch Part-No. 10 Dowel pin Part-No. 94.2 Bypass branch Part-No. 10 Dowel pin Part-No. 94.2
Casing Part-No. 12 Casing Part-No. 12
Rotary slide valve Part-No. 13 Throttle in the Bypass Branch, consisting of: Rotary slide valve Part-No. 13 Non-Return Valve in the Bypass Branch, complete, consisting of:
Operating lever Part-No. 14 Throttle Part-No. 15 Operating lever Part-No. 14 Throttle Part-No. 16
Throttle Part-No. 15 O-Ring Part-No. 78.4 Throttle Part-No. 16 Non-Return Valve Part-No. 17
Degassing branch Part-No. 26 Non-Return Valve Part-No. 17 O-Ring Part-No. 78.2
Degassing valve Part-No. 27 Single Spare Parts Degassing branch Part-No. 26 O-Ring Part-No. 78.4
Bypass Valve Head, complete Part-No. 60 O-Ring Part-No. 78.1 Degassing valve Part-No. 27 Coil spring Part-No. 95.3
O-Ring Part-No. 78.1 O-Ring Part-No. 78.2 Bypass Valve Head, complete Part-No. 60
O-Ring Part-No. 78.2 O-Ring Part-No. 78.3 O-Ring Part-No. 78.1 Single Spare Parts
O-Ring Part-No. 78.3 O-Ring Part-No. 78.4 O-Ring Part-No. 78.2 O-Ring Part-No. 78.1
O-Ring Part-No. 78.4 O-Ring Part-No. 78.5 O-Ring Part-No. 78.3 O-Ring Part-No. 78.2
O-Ring Part-No. 78.5 Coil spring Part-No. 95.1 O-Ring Part-No. 78.4 O-Ring Part-No. 78.3
Socket screw Part-No. 91.1 (95.2) O-Ring Part-No. 78.5 O-Ring Part-No. 78.4
Socket screw Part-No. 91.2 Coil spring Part-No. 95.3 Socket screw Part-No. 91.1 O-Ring Part-No. 78.5
Dowel pin Part-No. 94.1 Coil spring Part-No. 95.4 Socket screw Part-No. 91.2 Coil spring Part-No. 95.1
Dowel pin Part-No. 94.2 Dowel pin Part-No. 94.1 (95.2)
Coil spring Part-No. 95.1 For main dimensions H, S and L see type SSV 18, Dowel pin Part-No. 94.2 Coil spring Part-No. 95.3
Coil spring Part-No. 95.4 H1 and S1 on request. Coil spring Part-No. 95.1 Coil spring Part-No. 95.4
Coil spring Part-No. 95.3
Materials according to operating conditions and valid standards.
Coil spring Part-No. 95.4 For main dimensions H, S and L see type SSV 18,
Materials according to operating conditions and valid standards. H1 and S1 on request.
 SMA
SM Automatic Minimum Flow System

look at info
overview
PN 250-PN 400
ANSI 1500-2500
180 bar < Δp
< 400 bar

7
SMA
Automatic Minimum Flow System
SMA
Automatic Minimum Flow System
7
Mode of Operation Construction SMA
The main flow lifts the non-return cone (3) up to a The Autonomous Minimum Flow Systems comprise a
63/64
defined position. As soon as the main flow equals the split body with non-return cone, bypass and the pilot
value of the pump minimum flow, the cone (3) springs unit.
upwards and stops at another predetermined position.
In the standard option the casing for valve and bypass
During this procedure the cone actuates both control are of forged steel 1.0460. Cone seat and actuator
valves of the pilot unit via the lever (32) and the control control surfaces are stellite-faced. The other parts are
plunger (31). made of suitable stainless steels. look at info
overview

After control valve 2 closes, control valve 1 opens. For The minimum flow QBy is passed off via the Bypass.
the medium the passage to the piston (15) in the A piston (15) takes over the closing and opening of
by-pass becomes free. The piston forces forward the bypass. Double sealing of the piston in the ring bar

against the passing bypass flow and the bypass seat (14) achieves extreme durability of the internal
closes. (Position „OFF“). bypass parts. The following pressure reduction of the PN 250-PN 400
ANSI 1500-2500
minimum flow takes place with a multi-port throttle (13)
SMA 63 for non-speed controlled pumps With increasing main flow the cone (3) moves further in the bypass.
upwards. It reaches the final position at nominated
SMA 64 for speed controlled pumps
main flow Q100%. The pilot unit utilizes the medium and the pump pres-
Applications Through actuation of the bypass via a valve control sure for actuation of the piston (15). Two control valves
180 bar < Δp
The Automatic Minimum Flow System SMA 63/64 plunger (15) the bypass can be opened resp. closed With decreasing main flow the cone moves down- control the pump pressure in front of resp. behind the < 400 bar
is a protection device for pump protection. It auto- completely. This On-Off-Regulation of the Bypass wards and switches the two control valves, as soon piston and consequently the position of the piston ON
matically protects centrifugal pumps from damages, makes it possible to increase the load limit from as it falls below the required pump minimum flow. The resp. OFF is regulated. The control valves are actuated
which might occur during operation under low load 200 bar to 400 bar. The prefered duty is in the ran- bypass opens (Position „ON“) and the pump minimum depending on the main flow through the cone (3) posi-
conditions because of partial evaporation of the ge of nominal pressure 250 to 400 bar resp. ANSI flow is passed off via the bypass. tion via the lever (32). With the integrated fine throttle
pump content. As soon as the main flow falls short of 2500 lbs. (37) a cushioned move of the piston (15) is achieved.
a predetermined value, the valve opens its bypass, The Bypass flow can amount up to 35% of the main The integrated fine throttle (37) in the pilot unit reduces
so that the bypass flow is passed off, even if the flow. The valve works without additional auxiliary the velocity of the control flow in „OFF“ direction. This With a pressure indicator on the bypass the function of
delivery in main flow direction equals zero. power. prevents a too fast closing of the bypass and con- the Minimum Flow System can be supervised.
sequently a hammering valve piston (15).

Maximum flowrate for Q100% and QBy

Through the clear positions of the bypass („ON“ resp.
DIN ANSI „OFF“) combined with the pilot unit a fitting for pump
DN1 DN3 DN1 DN3 Q100% at 10 m/s QBy max. protection has been developed, which combines
DN2 DN2 a very low wear and tear with very high operational
mm mm inch inch m3/h l/s m3/h l/s security at highest pressure loads.
32 1.25˝
80 3.0˝ 180 50 45 13
40 1.5˝
40 1.5˝
100 4.0˝ 280 78 70 19
50 2.0˝
50 2.0˝ 70 19
125 5.0˝ 440 122
65 2.5˝ 120 133
65 2.5˝ 120 33
150 6.5˝ 630 175
80 3.0˝ 180 50
80 3.0˝ 180 50
200 8.0˝ 1120 311
100 4.0˝ 280 78
100 4.0˝ 280 78
250 10.0˝ 1750 486
125 5.0˝ 440 122
SMA
Automatic Minimum Flow System Notes 7
As a special design SMA 64 the system can also be design acc. to DIN, ANSI, BS, ISO and related stan- SMA
utilized for speed controlled pumps. dards are possible.
63/64
Special attention has been paid to easy main-
tenance. So it is not necessary to dismantle the Installation
bypass branch resp. the whole fitting for exchange We recommend installation directly on the pump
of the wearing parts like piston and ring seat. discharge branch. The flow direction at vertical
installation is from bottom to top, when installed ver-
The hand-operating branch with multi-port throttle tically.
serves for manual control of the minimum flow via In order to avoid vibrations in the valve and the pipe look at info
overview
a manually actuated valve combination. We recom- lines we recommend to continue the connecting
mend the branch for sparing of the internal bypass line at the outlet (DN2) and the bypass branch
parts at frequent operation in the range of minimum (DN3) for approx. 2-3 m in the chosen nominal bore.
flow as well as for filling and start-up of the plant. A pipe bend directly to the bypass branch should be bar

Two positions are possible: avoided.

PN 250-PN 400
ANSI 1500-2500
• D1 in the lower part of the casing with junction Design
below the cone; The construction is according to specification
· the bypass remains open AD 2000 and particularly to EN 13445. As per Pres-
• D2 in the upper part of the casing with junction sure Equipment Directive 97/23 EG the products are
above the cone (larger valve length); provided with the CE marking and the Declaration
180 bar < Δp
· the bypass closes at double minimum flow of Conformity. Certified according to the Module < 400 bar
H1 (Pressure Equipment Directive 97/23 EG) all
Warming-up branch, pressure gauge fitting, draina- dangerous material classes of category 1 to 4 are
ge branch etc. can be provided, if so desired. Flange covered.
SMA
Automatic Minimum Flow System
7
SMA 63 SMA
63

look at info
overview

bar

PN 250-PN 400
ANSI 1500-2500

180 bar < Δp

< 400 bar
SMA
Automatic Minimum Flow System
7
SMA 64 for speed controlled pumps SMA
64

look at info
overview

bar

PN 250-PN 400
ANSI 1500-2500

180 bar < Δp

< 400 bar
SR/S SR/SA
High Pressure Control
Valve

look at info PN 100-PN 640

overview ANSI 600-2500

8
SR/SA
High Pressure Control Valve
SR/SA
High Pressure Control Valve
8
Schroeder Flow Control Valve The valve is available with flanges acc. to DIN and Depending on the medium, the valve body is made SR/SA
ASME or welding ends in a standard range of DN of ferritic, austenitic or austenitic-ferritic (duplex)
Range of application 25 - DN 150 / NPS 1“ – NPS 6“. Other nominal sizes steel.
The SR/SA-type is a High-Pressure control valve for are possible on request.
liquids. It is designed for simple on-/off-regulation Design
(SA-type) as well as for challenging flow control The following valve characteristics are available: The design is according to specification AD 2000 and
(SR-type). Mainly it‘s utilised for the following linear, square, equal percentage and on/off. particularly to EN 13445. As per Pressure Equipment
applications: Valves can be equipped with all common types of Directive 97/23 EG the valves are provided with
actuators (electrically, pneumatically, hydraulically the CE marking and the Declaration of Conformity. look at info
overview
Power engineering actuated). Valves with on-/off-regulation can also be Certified according to the Module H1 (Pressure
• feed water control delivered self actuated, i.e. without external power Equipment Directive 97/23 EG) all dangerous
• injection systems supply and controlled by solenoid valve (figure 2). material classes of category 1 to 4 are covered.
bar

Chemical plant engineering

• process control PN 100-PN 640
ANSI 600-2500

pump protection
• minimum flow control Technical datas overview
Max. Design: 600 bar/400 °C
Pressure drop: Δp max ≤ 600 bar
In case of pump protection the SR/SA-type is highly DN 25 - DN 150
Nominal sizes:
(> other sizes on request) up to
associated with modern process control and monito- Δp = 640 bar
Connection end: welding ends or flanges
ring systems, as the minimum flow can be precisely Characteristics: on/off, linear, square, equal-%
adjusted to customers resp. plant requirements. Actuators:
electric, pneumatic, hydraulic
self operated
With the check back signal of the positioner (or other Body style: Angle- or Z-type
available sensors) the valve can be usefully integrated carbon steel
in every process control/monitoring system. In that DIN EN 10222-2
stainless steel
Body materials:
way the SR/SA-valve enlarges the Schroeder portfolio DIN EN 10222-5
duplex steel
to control valves and allows pump users to lower their DIN EN 10222-5
energy and maintenance costs. Inner Parts: chrome steel
metal to metal ceiling
Gaskets:
T ≤ 160° O-Ring,
Design datas and limits · Body
PTFE-pressure sleeve
· Inner gaskets
T > 160 ° Graphit
Referring to the increasing pressure/temperature Figure 2: SA-type self actuated, controlled by solenoid valve

level especially in the field of electrical power engi-

neering the valves are designed for pressures up
to pA = 600 bar / 8700 psi and temperatures of
TA = 400 °C / 750 °F. With up to 10 controlled throt-
teling stages pressure drops around Δp = 600 bar /
Figure 1: SR-type prepared for mounting of linear thrust actuators
8700 psi can be handled troublefree.
 SSD
Multi-Port Throttle
SS look at info
overview
PN 10-PN 640
ANSI 150-2500
up to
Δp 640 bar

9
SSD
Multi-Port Throttle Notes 9
Multi-Port
Throttle

look at info
overview

bar

PN 10-PN 640
ANSI 150-2500

Multi-Port Throttle for pressure- and flow reduction up to

Δp 640 bar

Operation range (PED) 97/23/EG the products are supplied with CE

The Multi-Port Throttles are used to reduce the Marking and Declaration of Conformity. Certified to
pressure and flow rate of fluids in pipe systems. module H1 all dangerous classes of category 1 to 4
are covered.
Design
Multi-Port Throttles are available for sizes from DN Versions
20 up to DN 500 and pressure ratings up to PN 640 The pictures above show the available versions of
and ANSI 2500 and for medium temperature up to our Multi-Port Throttles. If you have any questions
300 °C. do not hesitate to contact us – it is our pleasure to
The standard material for casing is 1.0460 (P250GH help you solving your technical problem.
similar to ASTM A105) and for the throttles 1.4581.
On request casings can be supplied of different
high-grade steel qualities. The design is according
to standard AD 2000 and particularly to EN 13445.
As required by Pressure Equipment Directive

SSD
 SDV
SD Back Pressure Device

look at info
overview
PN 10-PN 400
ANSI 150-2500
up to
p 20 bar

10
SDV
Back Pressure Device

SDV

look at info
overview

bar

PN 10-PN 400
ANSI 150-2500

SDV – Schroeder Back Pressure Device

Range of application cones to hammer at low flow rate is minimized. So

The SDV is a back pressure device, which keeps the SDV is suitable for plants with large flow range
the static pressure within the pipeline above a and frequent part load condition, too. up to
defined minimum value without reference to flow Δp 20 bar

rate. That means, the pressure will not fall below the Technical data
given minimum value over the whole operating range. The Schroeder pressure device is manufactured in
Normally back pressure devices are used to avoid the nominal sizes DN 25 – DN 200 / NPS 1“ – NPS 8“,
cavitation and partial evaporation in the pipeline. for pressure ratings up to PN 400 / ANSI 2500 and
Due to the increased pressure level in the protected a max. operating temperature of 400 °C / 750 °F.
plant section they prevent a lower deviation from the Higher pressure ratings are possible on request. The
local vapor pressure. The SDV has an integrated flange-type body is normally made of 1.0460 / ASTM
non return-valve function, i.e. the piping is also SA105. Referring to medium, several alloyed steels
protected against returning flow. are also deliverable. The regulating trim is made of
Cr-steel or aluminium-bronze.
Mode of operation
The function of the SDV is based on a spring loaded Design
cone. Cone and spring are adjusted in a way, The design is according to specification AD 2000 and
that the force of the static pressure lifts the cone particularly to EN 13445. As per Pressure Equipment
of the seat and does not allow a flow rate before Directive 97/23 EG the SDV is provided with the CE
reaching the minimum pressure value. Compared marking and the Declaration of Conformity. Certified
with other pressure devices the Schroeder SDV has a according to the Module H1 (Pressure Equipment
regulating trim, so that the throttling area of the Directive 97/23 EG) all dangerous material
cone seat is attuned to the current flow. With this classes of category 1 to 4 are covered.
design feature the tendency of spring loaded shut-off