0% found this document useful (0 votes)
46 views2 pages

Design and Analysis of Isolated Footings: Project Information

This document contains an isolated footing design for a proposed 2 storey duplex residential project in the Philippines. It provides input data on material properties, basic footing dimensions and geometry, soil properties, and an applied load of 267 kN. The design was performed by engineer MGARIMANDO for client ALLAN FLORESCA.

Uploaded by

mark7301158
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
46 views2 pages

Design and Analysis of Isolated Footings: Project Information

This document contains an isolated footing design for a proposed 2 storey duplex residential project in the Philippines. It provides input data on material properties, basic footing dimensions and geometry, soil properties, and an applied load of 267 kN. The design was performed by engineer MGARIMANDO for client ALLAN FLORESCA.

Uploaded by

mark7301158
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ACECOMS GEAR: Isolated Footing Design Version: 2.1 (Rev.

5)

Design and Analysis of Isolated Footings

Project Information

Project = PROPOSED 2 STOREY DUPLEX RESIDENTIAL

Title = F-1

Client = ALLAN FLORESCA

Organization = MGR

Engineer = MGARIMANDO

Footing1: Input Data

Material Properties:

Main Rebars, fy 275.8 N/mm^2


Concrete fc' 20.7 N/mm^2
Concrete Density 24.0 kN/m^2

Basic Footing Data

Column Cross-Section XSRectangle


Soil Density 18.0 kN/m^3
Soil Bearing Capacity 250.0 kN/m^2
Natural Soil Level (NSL) 1.50 m
Excavation Level (Excl) 1.50 m
Height of Overburden 1.50 m
Soil (Hso)

Geometry Data:

Length 1.25 m
Width 1.25 m

2/3/2019 (User: MG.A.RIMANDO) 1


ACECOMS GEAR: Isolated Footing Design Version: 2.1 (Rev. 5)

Thickness at Edge 0.30 m


Thickness at Center 0.30 m

Applied Loads

Sr Load Pu (kN) Mux (kN- Muy (kN- Load OS


. Comb m) m) Factor Factor
N
o.
1 Pu 267 25 0 1.45 1

Footing Diagram

Footing1

2/3/2019 (User: MG.A.RIMANDO) 2

You might also like