Scribd
Upload
25 views

NewFunctions en

cubase controller

Uploaded by

Geo Puiu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

NewFunctions en

cubase controller

Uploaded by

Geo Puiu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

V1.

6 New Functions
CC121 New Functions Jog/Shuttle function with
scrubbing
The new functions of the CC121 are described Scrub operation is available via the Jog/Shuttle
below. function in the AI Knob section.

Cubase version 5.1.1 or later is necessary for the


new functions.

EQ gain inverse
You can invert the gain of individual EQ bands or
the entire EQ gain curve on Cubase via the EQ
section.

Operation is as follows.

1 Hold down [JOG] to call up the


CC121 control panel window.
When the window appears, release [JOG].
Operation is as follows.

Individual EQ bands
Hold down [EQ TYPE] and press desired [ON].

Entire EQ gain curve


Hold down [ALL BYPASS] and press one of [ON].
Each [ON] has the same function in this case.

The EQ gain invert function is not available while 2 Press [JOG] to switch the Jog
the CC121 is in the Quick Control mode. Mode setting to [Shuttle] or
[Scrub].
Each setting in the Jog Mode works as
follows. For details, refer to the CC121 and
Cubase Operation Manual.
Jog:
Works as the CC121 standard Jog/Shuttle
function.
Shuttle:
Works as the “Shuttle speed” function on
Cubase.
Scrub: 2 Press [VALUE] knob to select the
Works as the “Jog wheel” function on Bank.
Cubase. You can adjust the Jog wheel speed
by the pull-down menu on the right side. The
larger the number, the faster the speed.

3 Hold down [JOG] to close the


CC121 control panel window. 3 Press [VALUE] knob to switch the
When the window closes, release [JOG]. Bank setting.
You can switch the function selected in the

4 Operate AI KNOB. Bank to the “Studio Control,” ”Monitor


Control,” or “User Assignable.”
For details, refer to the CC121 Operation
Manual.

Switching the function in


the Function section 4 Hold down [JOG] to close the
You can switch between functions by using the CC121 control panel window.
knob in the Function section.
When the window closes, release [JOG].

Operation is as follows.

1 Hold down [JOG] to call up the


CC121 control panel window.
When the window appears, release [JOG].

U.R.G., Pro Audio Division


© 2010 Yamaha Corporation
008MW-B0

You might also like