Scribd
Upload
44 views

Casing Ambient Diff. Temp. Temp Temp. ° C ° C ° C (S) (A) (DT) 1 45 30 15 2 45 30 15

The document contains information about insulation requirements for steam lines. It provides temperature measurements for the outer wall and ambient conditions. It also lists the thermal conductivity of the insulation material used. Calculations are shown to determine the minimum insulation thickness required to match the left and right sides of an equation, with notes to adjust the thickness to make the sides equal.

Uploaded by

dgmprabhakar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
44 views

Casing Ambient Diff. Temp. Temp Temp. ° C ° C ° C (S) (A) (DT) 1 45 30 15 2 45 30 15

The document contains information about insulation requirements for steam lines. It provides temperature measurements for the outer wall and ambient conditions. It also lists the thermal conductivity of the insulation material used. Calculations are shown to determine the minimum insulation thickness required to match the left and right sides of an equation, with notes to adjust the thickness to make the sides equal.

Uploaded by

dgmprabhakar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

OUTER WALL CASING AMBIENT DIFF.

DIA TEMP. TEMP. TEMP TEMP.


S.No LOCATION
mm °C °C °C °C
( Do ) ( O ) ( S ) ( A ) ( DT )
1 Steam Line 168 350 45 30 15
2 Process steam line 88.9 160 45 30 15

( 2000 x K x ( O - S ) ) / ( F x ( S - A ) ) = ( Do + 2 x L ) ln (( Do + 2 x L ) / Do )

Insulation material ; LRB Mattress


Thermal Conductivity as per IS 8183
WIND EMMISSIVITY FILM MEAN THERMAL MIN. INSULN. DENSITY
VELOCITY OF SURFACE COEFFICIENT TEMP. CONDUCTIVITY THK. REQD. OF INSULN L.H.S
M/S Kcal/hm^2°c °C Kcal/hm² °C mm Kg/m^3
( V ) ( E ) ( F ) ( MT ) ( K ) ( L min ) ( Rho )
1 0.2 8 197.5 0.069402 118.00 100 352.79
1 0.2 8 102.5 0.045958 34.00 100 88.09

+ 2 x L ) / Do )
Note: Make LHS equal to RHS by changing L min
R.H.S

354.49
89.13

You might also like