Scribd
Upload
71 views

Product Description Parameter Unit Specification 60/70 N

This document provides specifications for several asphalt and bitumen products including Pertamina Asphalt 60/70 N, Paving Asphalt 60/70 N, and Shell Bitumen 60/70. It lists parameters such as penetration, softening point, ductility, specific gravity, flash point, and solubility. The specifications are in accordance with standards from ASTM and other organizations and provide the measurement units and acceptable ranges for each parameter.

Uploaded by

Bobby Hartanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views

Product Description Parameter Unit Specification 60/70 N

This document provides specifications for several asphalt and bitumen products including Pertamina Asphalt 60/70 N, Paving Asphalt 60/70 N, and Shell Bitumen 60/70. It lists parameters such as penetration, softening point, ductility, specific gravity, flash point, and solubility. The specifications are in accordance with standards from ASTM and other organizations and provide the measurement units and acceptable ranges for each parameter.

Uploaded by

Bobby Hartanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Description Parameter Unit Specification 60/70 N

Penetration at 25° C x 0.1 mm ASTM D 5 60-70

Softening Point °C ASTM D 36 48-58


Pertamina Asphalt is produced in Pertamina
Ductility at 25° C, 5 cm/min (min) cm ASTM D 113 100
Refinery UP IV Cilacap from Asphallic type of
Cure Oil in semisolid form, with characteristic Specific gravity - ASTM D 70 1
non metallic soluble in CS2 (carbon disulphide),
Flash Point (min) °C ASTM D 92 200
water proofing and adhesive.
Solubility in trichloroethylene (min) mass % ASTM D 2042 99

Loss on heating % ASTM D 6 0.4

Penetration at 25° C x 0.1 mm ASTM D 5 60-70


Softening Point °C ASTM D 36 47-54

Ductility at 15° C, 5 cm/min (min) cm ASTM D 113 100


Paving Asphalt 60/70 N is a penetration graded Ductility at 10° C, 5 cm/min (min) cm ASTM D 113 20
asphalt product derived from specially selected
Dynamic viscosity at 60° C (min) Pa.s ASTM D 2171 180
crude oils via carefully controlled refining
processes. Wax content (max) mass % DIN EN 12606-1 2
Specific gravity - ASTM D 70 1.01-1.05

Flash Point (min) °C ASTM D 92 260


Solubility in trichloroethylene (min) mass % ASTM D 2042 99.5

Penetration at 25° C x 0.1 mm ASTM D 5 60-70

Softening Point °C ASTM D 36 48 - 56 99.5


Shell Bitumen 60/70 is unlikely to present any
Solubility in trichloroethylene (min) mass % ASTM D 2042 99.5
significant health or safety hazard when
properly used in the recommended application, Ductility at 25° C, 5 cm/min (min) cm ASTM D 113 100
provided good standards of industrial and
Loss on heating % ASTM D 6 0.2
personal hygiene are maintained.
Drop in penetration after heating % ASTM D 5 20

Relative Density @ 25/25oC ASTM D 70 1.00 – 1.06

You might also like