Scribd
Upload
61 views

Course Title: Engineering Graphics Course Code: 2005 Course Category: F Periods/ Week: 5 Periods/ Semester: 75 Credit: 0

The document provides information about the engineering graphics course including the course title, code, category, periods per week/semester, credits, time schedule by module and topic, course outcomes, specific outcomes by module, and content details by module. The course aims to help students understand the importance of engineering graphics and develop skills in lettering, dimensioning, geometric constructions, scales, and projections of points, lines and planes. It is a 75 period semester course worth 0 credits.

Uploaded by

vaisakmct
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views

Course Title: Engineering Graphics Course Code: 2005 Course Category: F Periods/ Week: 5 Periods/ Semester: 75 Credit: 0

The document provides information about the engineering graphics course including the course title, code, category, periods per week/semester, credits, time schedule by module and topic, course outcomes, specific outcomes by module, and content details by module. The course aims to help students understand the importance of engineering graphics and develop skills in lettering, dimensioning, geometric constructions, scales, and projections of points, lines and planes. It is a 75 period semester course worth 0 credits.

Uploaded by

vaisakmct
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

COURSE TITLE : ENGINEERING GRAPHICS

COURSE CODE : 2005


COURSE CATEGORY :F
PERIODS/ WEEK :5
PERIODS/ SEMESTER : 75
CREDIT :0

TIME SCHEDULE

MODULE TOPIC PERIODS


Introduction of engineering graphics
1
Lettering, numbering and dimensioning 19
2 Geometric construction & Scales 21
3 Projections of points and lines 18
4 Projections of planes 17
TOTAL 75

COURSE OUTCOME:

After the completion of the course, student will be able to


o Understand the importance of engineering graphics
o Recognise the use of drawing instruments, standards, symbols etc.
o Appreciate the lettering, numbering , dimensioning
o Recognise geometric construction & Scales
o Understand the projections of points ,lines etc.
o Understand the projections of planes

SPECIFIC OUTCOME:

MODULE - I

1.1.0 Understand the importance of engineering graphics


1.1.1 Understand the importance of engineering graphics
1.1.2 Explain the importance of engineering communication medium
1.1.3 Describe the development of engineering graphics and computer aided drafting
CAD
1.1.4 Indicate the link between engineering graphics and other subjects of study in
diploma courses
1.2.0 Recognise the use of drawing instruments
1.2.1 Use engineering drawing instruments
1.2.2 Select the proper instrument to draw horizontal, vertical and inclined lines
1.2.3 Select the proper instrument to draw large and small circles and arcs to its
specifications
1.2.4 Select the proper pencil to draw different types of line according to its
specifications
1.2.5 Identify the steps to keep the drawing clean and tidy

1.3.0 Recognise the use of drawing standards, symbols etc


1.3.1 Appreciate the standards of engineering drawing
1.3.2 Select the drawing sheet
1.3.3 Draw different types of lines
1.3.4 Prepare title block as per BIS
1.3.5 Fold drawing sheets as per standards

1.4.0 Appreciate the lettering & numbering


1.4.1 Apply lettering and numbering
1.4.2 Write drawing title using sloping and vertical lettering including numerals as per
BIS
1.4.3 Select suitable size of letters of different layout and applications
1.4.4 Write engineering drawings notes using lettering

1.5.0 Appreciate the dimensioning


1.5.1 Apply dimensioning as per standards
1.5.2 State the need of dimensioning as per BIS specification
1.5.3 Identify the notations used in a drawing as per BIS
1.5.4 Identify the system of placement of the dimensions as per BIS
1.5.5 Dimension of a given drawing according to BIS including features
1.5.6 Apply the rules for dimensioning of standard features, given a drawing
comprising of standard features
1.5.7 Identify the principles of dimensioning, given a dimensioned drawing
1.5.8 Identity the correctness of an engineering drawing dimensioned and dimension
the same as per BIS

MODULE - II

2.1.0 Recognise Geometric construction


2.1.1 Apply principles of geometrical construction
2.1.2 Construct polygon, given the length of the side
2.1.3 Insert a regular polygon in a circle.
2.1.4 Define Ellipse, involutes, helix, Parabola, Hyperbola and Cycloid,
2.1.5 Construct Ellipse by concentric circle, eccentricity, rectangular and parallelogram
methods
2.1.6 Construct an involute, helix, parabola from given data
2.1.7 Identify the application of these constructions in engineering practice.

2.2.0 Recognise Scales


2.2.1 Know about the importance of scale in Engineering Drawing
2.2.2 Identify different types of Scales

MODULE - III

3.1.0 Understand the projections of points & lines


3.1.1 Understand the projection of points, lines and planes
3.1.2 Project points in different quadrants
3.1.3 Project lines parallel to both planes
3.1.4 Project lines perpendicular to HP and || to VP
3.1.5 Project lines perpendicular to VP and || to HP
3.1.6 Project lines inclined to HP and || to VP
3.1.7 Project lines inclined to VP and || to HP
3.1.8 Project lines inclined to both planes - simple direct questions and answers
3.1.9 Find true length of lines

MODULE - IV

4.1.0 Understand the projections of planes


4.1.1 Project planes parallel to VP and perpendicular to HP
4.1.2 Project planes parallel to HP and perpendicular to VP
4.1.3 Project planes inclined to one plane and parallel to other

CONTENT DETAILS

MODULE - I

1.1 The Importance of Engineering Graphics


Explanation of the scope and objective of this subject – its importance as a graphic
communication- Computer Aided Drafting (CAD) need for preparing drawing as per BIS
standards.

1.2 Drawing Instruments.


Basic drawing instruments – T square – Set square – compass - dividers – drawing
boards – Pencils – Drawing papers – Mini drafter – French curves – Stencils – Selection
and mode of using them.
1.3 Drawing Standards
Size of drawing sheets – Layouts of drawing sheet – Title Blocks – Types of lines –
Folding of drawing sheets

1.4 Free hand Lettering and Numbering


Need for legible lettering and numbering on drawings – selection of suitable size of
lettering for different drawing writing of Engineering drawing titles and notes using both
vertical and sloping styles.

1.5 Dimensioning
Function of dimensioning - need for dimensioning engineering drawing according to BIS
– notation used in dimensions – dimension line – extension line – arrow heads and
leader – system of dimensioning (method I and method II)

MODULE - II

2.1 Geometric construction


Construction of regular polygon given the length of its side - methods of inserting a
regular Polygon in a given circle – construction of ellipse by different methods –
eccentricity - concentric circle- rectangular and parallelogram. Definition of involute -
helix - parabola & hyperbola – construction of cycloid- helix- involute and parabola.

2.2 Scales
Meaning of drawing to scale – reduced scale – enlarged scale – full size scale – types of
scale – plain scales & diagonal scales – dividing a line into number of equal parts

MODULE - III

3.1 Projection of points- lines and planes


Projection of points in different quadrants-
Projection of straight lines(in first quadrant only) - parallel to one or both planes -
parallel to one plane and perpendicular to other – inclined to one plane and parallel to
other - inclined to both planes. Methods of finding true length and its inclination with
the reference planes.
MODULE - IV

4.1 Projection of planes


Projection of planes (in first quadrant only) – perpendicular to both planes - parallel to
one plane and perpendicular to other plane - inclined to one plane and perpendicular to
the other plane

TEXT BOOKS

1. K. C Jon, - Engineering Graphics - PHI Learning Private Limited


2. P. I. Varghese - Engineering Graphics - VIP Publishers

REFERENCE BOOKS

1. N D Bhatt - Engineering Drawing


2. Sageer& Abu - Engineering Graphics
3 M. B. Shah and B.C.Rana - Engineering Drawing - Pearson Publications
4. T.Jayapoovan - Engineering Drawing & Graphics using Autocad – Vikas
publications

You might also like