Scribd
Upload
315 views6 pages

Circuit Power Audio Amplifier Stereo IC TDA2822

The TDA2822 is a monolithic integrated circuit intended for use as a dual audio power amplifier, capable of delivering 1 watt of output power per channel. It can operate with a supply voltage as low as 1.8V and features low distortion, low quiescent current, and noise-free operation. The circuit diagram and list of components provided allow for the construction of a basic stereo amplifier using this IC.

Uploaded by

msicoie1851
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
315 views6 pages

Circuit Power Audio Amplifier Stereo IC TDA2822

The TDA2822 is a monolithic integrated circuit intended for use as a dual audio power amplifier, capable of delivering 1 watt of output power per channel. It can operate with a supply voltage as low as 1.8V and features low distortion, low quiescent current, and noise-free operation. The circuit diagram and list of components provided allow for the construction of a basic stereo amplifier using this IC.

Uploaded by

msicoie1851
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

Circuit power audio amplifier stereo IC TDA2822 – 2x 1 W

TDA2822 is an ideal Op amp for low output applications. It is a good choice as a preamplifier in stereo high power amplifier circuits. It has two inputs and two
outputs which can deliver 250 milli watts output power. The amplifier circuit with in the IC is well set for noise free operation. Outputs can be directly coupled to
the speakers through the decoupling capacitors.
Schematic amplifier dual (stereo) – TDA2822
Suggested PCB
Characteristics for tda2822
 supply voltage down to 1.8v
 low crossover distortion
 low quiescent current
 bridge or stereo configuration

The TDA2822M is a monolithic integrated circuit in 8 lead Minidip package. It is intended for use as dual audio power amplifier in portable radios.

List of material for assembly a stereo amplifier with tda 2822


Parts Value

C1,C2 10uF/ 25 Volts Electrolytic

C3, C4, C5, C8,C9 100nF Polyester – 104 or 0.1 or .1 or 100n

C6, C7 470uF /25 Volts Electrolytic

IC1 TDA2822M

P1 10K Potentiometer Duple – Volume control

R3, R4 4.7 Yellow, Violet, Gold, Gold

R5, R6 10K Brown, Black, Orange, Gold

VCC, OUT, IN Connectors

You might also like