Questions between 11- 20 CNS 1

1. Two Engineers submitted sealed ___ to a prospective client for a project. The client told
engineer A how much engineer B have bid and invited engineer A to beat that amount. Engineer
A really wants that project and honestly believes that he can do better than engineer B. What
should he do?
Ans.: he should remain to be considered that design, but must not change his bid.
2. the best description for “going along the crowd” and “doing what romans do”
Ans.: Mob Action
3. which of the following terms is not belong to code of ethics:
A. The ten commandments C. Rossetas stone
B. The ancient code of Hammurabi D. The Scouting Creed
4. which is the following is not belong to ethics:
A. Honesty C. Integrity
B. Morality D. Profitability

CNS 2

86. A joint was made by joining two metals by distributing a molten non-ferrous filler into the interface.
this process is best described as____.

Ans. Soldering

87. a process that involves molten metals

Ans. Casting

88. A process of “ Grinding” that essentially makes NO changes in the dimensions of the workpiece.

Ans. Superfinishing

89. which of the following operations is not a cold-working operations.

Ans. Piercing

90. which of the following welding procedure uses electrode.

Ans. SMAW
CNS 1

72. why does an ice skaters angular velocity increases as she moves her arms towards her body.

Ans. all of the above

73. What can you solve using the impulse momentum method

Ans. force-energy-time

74. first derivative of kinetic energy w/ respect to time?

Ans. Power

75. net force is equal to zero

Ans. Has linear Momentum

76. a perfect sphere moves up an incline. which of the ff. is increased?

Ans. Potential Energy

Additional random (situational) Prince

1. An engineer authored a book and published it with prints like “Best-seller”, etc, surpassing every
competitor in the market. a Buyer bought the book and complained about its credibility, etc.
what will the agency do/ what is the best approach the agency can do?

Ans. make the engineer sight proper evidences first supporting his claim.

2. An engineer, with years of experience, is made aware of a construction (of a something) which
he is sure will harm/ endanger the ecosystem there. What’s the best approach he can do?

Ans.: Ask proper agencies first and learn more about the project.

3. A scientist logs into her book. what must be the first thing he should write in his book?

Ans. Date and time?

4. use compressed air to clean hydraulic/ discharge units.

Ans.: Never
CNS 1

Plan stamping is best defined as:

Ans.: An illegal action of signing off on a project you didn’t design or check

Complete the sentence: the us department of justice’s successful action in 1970’s against the
engineering code of ethics….

Ans.: the prohibition violated antitrust statutes.

An Engineer that specializes in designing wood framed houses.

II – the local rotary club

II – the local chamber of commerce

III – the national-timber foundation

IV – the pro-logging lobbying tea

Ans.: All of the above (I,II,III,IV)

Best description of the behaviour of a substance

Ans.: internal energy

Derivative of Kinetic Energy With Respect to Time

Ans.: Power

Derivative of Kinetic Energy With Respect to Velocity

Ans.: Momentum

CNS 1

26. charging professional services is unethical

Ans.: Per Diem, Billed Monthly in Advance

27. Engineer is using his vacant time in illegal gambling

Ans.: Yes, Engineer _____ only in person and organization.

28. Field engineer, inspecting and saw leaking hazardous chemicals and reported to his supervisor about
the matter, then supervisor command to the field engineer to send report to the maintenance division.
in the next several month, mas nilala and leak sa pipe.

Ans.: ask the supervisor to investigate what action has been taken.

29. A 30 years old, senior engineer nag gunit sya sa 3 group design, geotechnical, environmental____.
after mahuman and project sa 3 ka group , kay n iagi pa sa iya kay sya mag approve sa design. unsa ang
ethical na himuon sa leader sa group pag magapproach sa senior engineer

Ans.: Each design segment must signed and by the licensed group leader.

30. A new engineer firm, nagabalak na iadvertise ilang services sa newspaper. the advertisement agency
gives four concepts or types of advertisement na pilian sa firm.

Ans.: neither I, ii, iii, iv

41. City engineer, contractor came up with bid and two tickets of football game.

Ans.: return the ticket, accepts the bid.

42. all real gases deviates from PV=mrt. which of the following has the smallest deviation?

Ans.: high temperature, low pressure

44. liquid boils when vapour pressure is equal

Ans.: ambient pressure

46. not an extensive property

Ans.: Temperature

47. a substance that is uniform property.

Ans.: pure substance

48: Saturated at 2.0 kpa and 17.5 Celsius, at 40 celsius and 2.0 kpa?

Ans.: Superheated
CNS 2:

26. HVAC pneumatic control system, air pressure?

Ans.: 18 psig

27. pneumatic control system, falls in range of air pressure?

Ans.: 3-15 psig

28. What kind of pneumatic thermostat?

Ans.: direct acting

29. What kind of pneumatic hot water valve

Ans.: Normally open

30. term from pneumatic signal 15 psia to contrl pressure 20

Ans.: pneumatic relay

31. what kind of pneumatic steam valve

Ans.: normally closed

41. False About noncircular ellipse?

Ans.: A and C are equal to the x^2 and y^2

42. y=a1 +a2x

Ans.: straight line

CNS 1:

42. Mr. Franklin, 94 yrs old. none of his sons are ME. accepts his sons work and puts seals.

Ans.: This mode is not permittable

43. Depreciation allowance is best described as?

Ans.: Federal law…

44. Paking Factor:

Ans.: volume of atoms over cell volume

45. NPFT

Ans.: National Piping for Threading

46. Why allows excess air in combustion?

Ans.: for complete combustion

47. Products of combustion:

Ans. Carbon dioxide and water

48. the ratio of inertial force over gravitational force:

Ans.: Froude’s Number

49. passive element/ material of a circuit

Ans.: Stores, delivers energy

50. Hardest metal

Ans.: Martensite

51. ductile to brittle temperature test

Ans.: for systems working on cold temperature, systems that fail on 20 J

52. Two concentric springs oil-hardened

Ans. inner – 5 outer – 7

53. bevel gears

ans. both sun and planet gears

54. a computer language perform by central processing unit

ans. machine language

55. use of compiler

ans. a software use to translate high level language to machine code

56. effect of recursive

ans.: less code more memory

57. 8 bit system accurately translate 180 and above integer

ans. if the integer is ranging to (-225,0)

58. an operating system required to read HTML

ans.: apple(os), ms-dos, windows, unnix

59. a preferred fluid for hydrotesting from boiler and high pressure valves

ans.: water

60. best describe as formula or a set of step in problem solving

ans.: algorithm

61. in typical spreed sheet, what is directly below AB4

ans.: AB5

62. RT(word na RT)

ans.: precision is important, accuracy is not important

63. marking in a boiler design based on RPTV

ans.: S

64. not included in pneumatic system

ans.: pump

65. in programing, recursive

ans. calls itself

66. Safety high pressure valves

ans.: UV

67. Included in halogen family

ans.: fluorine

68. An engineer having an issue about the design, supervisor said she has a point, but cant do anything
to change the design because it is used through the years

ans.: go to company’s upper and nontechnical management

69. Can’t be derive from tensile test

ans.: endurance limit

70. Number of atoms in an hexagonal closed-packed cell

ans.: 6

71. Engineer should uphold safety, health and

ans.: welfare

72. Not an extensive state

ans.: temperature

73. Ideal Rankine cycle

ans. two constant pressure and two isentropic process

74. Otto combustion cycle

ans. two constant volume and two two isentropic process

75. For every gas of particular temperature above which the properties of gas cannot be distinguish
from the properties of liquid no matter how great the pressure. The temperature is known as

ans. critical temperature

76. What is the best statement o second law of thermodynamics

ans.: Its impossible for a system working in complete cycle to accomplish, as its sole effect, the
transfer of heat from a body at given temperature to a body at higher temperature.

77. Which of the following statements is false

ans.: the maximum work output will be obtained in an irreversible process

78. Daltons law of partial pressure state

ans.: the total pressure of gas mixture is the sum of individual gases partial pressures.

79. Excess air is required in combustion because it

ans.: allows complete combustion

80. In order to use lump capacitance to evaluate transient heat transfer. The biot number must be

ans.: less than 0.1

81. The products of combustion of gases hydrocarbon

ans. carbon dioxide and water

82. Dimensionless number does combination of variables represent shown

ans. Prandtl

83. A substance that is uniform throughout the sample

ans.: pure substance

84. False statement about radiant heat transfer

ans.: radiant energy cannot travel through vacuum

85. T is absolute temperature, the intensity of radiation from an ideal radiator is proportional to

ans.: T^4
86. The term for the ratio of stress to strain below proportional limit

ans.: Young’s modulus

87. Not an identity matrix

ans.: AI= A-1

88. Components of hydraulic system

ans.: all given components form I to VI

89. Not a formula used to solve thin walled thickness

ans.: jowwalsky formula

90. Phase water-alcohol mixture

ans. 3

91. Atmospheric air humidity 50% heated 10 degrees Celsius to 25 degrees Celsius

ans. heat absorbed equal heat constant mixture

92. Thermal resistance single diagonal conduction

ans. logarithmic

93. Ideal rate of heat transfer to the wall

ans. directly proportional to coefficient and inversely proportional to the wall

94. Kinetic viscosity is

ans. m2/s

95. Does not affected by the rise and fall of liquid

ans. viscosity of fluid

96. Net force IS equal to zero

ans.: constant linear momentum

97. Newtons force

ans. acceleration of 10 kg mass, 0.1 meter per second squared

98. Net force NOTt equal to zero

ans. acceleration is the same to the resultant force

99. Two identical gears

ans. ring and gear

100. -3x2-4y2+1

ans. ellipse

101. i+3j+k= 0, i+5j-7k=0

ans. orthogonal

102. Mixture of ice and water maintained in o degrees Celsius

ans. 0 degrees freedom of degrees

103. Pneumatic pressure range in control system

ans. 3psig-15psig

104. “cleaning the laboratory “

ans. positive pressure room and negative pressure laboratory

105. What is the name for a vector that represent the sum of two Vectors

ans.resultant

106. For which type of process does the equation dQ=TdS hold?

ans. reversible

107. A leak from faucet comes out in separate drops. Which of the following is the main cause of this
phenomenon?

ans. surface tension

108. Ethics in groups

ans. all of the above(time, culture, place)

109. Recrystallization

ans. same with annealing but for lower temperature

110. Bidder gives two tickets for basketball event and have lowest bid.

ans. return the tickets and accept the bid

111. Why there is code of ethics?

ans. because engineers can take advantage to their clients easily

112. NSPE; competitive bids

ans. clients are required to seek complex bidding

113. You are at the city engineer contractor arrives with football tickets

ans. return the ticket and accept the bid

114. New engineering firm; advertisement for local newspaper

ans. neither I,II,III nor IV

115. Complete the statement “professional Engr. took licensed exam in ME

ans. may designed electrical engineering that she is competent and electrical part is insufficient
to the overall job.

116. Engineering firm hired a developer for shopping wall deadline of the bidding at some contractor
contact the firm.

ans. the firm cannot reveal the list, etc. without the consent of the client as required by the law

117. Cannot directly determine by pitot tube

ans. discharge rate

118. Inertial forces to gravitational forces

ans. froudes number

119. Seawage treatment plant near what place

ans. the engineer should contact the agencies to get more data

120. Contractor received bad publicity in the local paper

ans. the article must be objective and truthful.

121. Which of the following is a basic component of hydraulic system

ans. fluid, reservoir, pump, line, valve, actuator

122. What do you call the vessel which has join efficiency of 0.85?

ans. RT-3

123. Mark which means safety vessel valve

ans. UV

124. To increase the force, is also increasing

ans. cylinder size

125. If a rod reaches its yield point, then again subjected to another tension

ans. new yield point is establish, higher than the original

126. Difference between recrystallizing and reanneallizing

ans. recrystallizing is the same with reanneallizing except for lower temperature

127. Poission’s ratio

ans. ratio of unit lateral stress to unit longitude stress

128. Cold water – hot water

ans. identical

129. Cold water- cold water

ans. reversible
130. Cold water- concurrent

ans. end to end

131. Device used to test the hardness of metals

ans. scleroscopic

132. Describe the metal crystalline structure depending in temperature

ans. allotropism

133. Discontinuity of an abrupt change in geometric is

ans. incremental stress

134. A submarine having a volume of concentration of 0.06%. What is the concentration of partial per
minute (ppm)

ans. 600 ppm

135. What is the method we use to know the leakage of hydraulic?

ans. inspect the area visually normal light

136. An unethical act that an engineer would not be permitted to do?

ans. revealing data, design without the permission of the employer

137. Gift from the employers

ans. a coffee mug incripted with employers logo

138. Ethical way an engineer would do to the employees

ans. spend personal time outside the contract

139. Difference between shakedown and ratcheting

ans. shakedown is static, ratcheting is progressive

140. In a pressure vessel, the welded joint is a?

ans. single welded butt joint with backing strip

141. Cleaning the inside of a water boiler

ans. handhole

142. Relationship between ethical and legal requirements

ans. ethical requirements adds restrictions not required by law

143. 600 degrees Fahrenheit, 300 psig

ans. superheated

144. BLEVE

ans. catastrophic boiler explosion

145. Temperature versus distance travelled to cold

ans. inverted end to end

146. Temperature steam

ans. constant

147. Material breach of contract

ans. owner’s become in solvent

148. To reduce annual maintenance cost

ans. the contractor will share one time at owner’s savings

149. Time of essence

ans. damages will not be claimed

150. TORT

ans. is a civil wrong

151. True about legality and enforceability

ans. mutual understanding about all parties is evident

152. Line of privity

ans. the contractor is responsible for owner not in general contractor

153. Reduce labor cost

ans. efficient methodology for contractor only

154. Specific sum for engineer payment of each day within the project

ans. pier-dem fee

155. Proven but slightly injured

ans. nominal

156. New sewage

ans. the engineer must approach agencies that gathers data before implementing judgment

157. What is exactly below AB4

ans. AB5

158. ‘cold’ to ‘hot’

ans. identical

159. ‘cold’ to ‘cold’

ans. reversed end to end

160. ‘cold but parallel’

ans. inverted

161. definition of power factor in an alternating circuit

ans. ratio of resistance and impedance

162. definition of enthalpy

ans. total amount of useful energy in the system

163. Effect of the rise and fall of a fluid in a small diameter

ans. no viscosity

164. Unit of kinematic viscosity

ans. m2/s

165. 3-point in a temperature-pressure diagram

ans. three phases coexist

166. Reduces relative humidity in test chamber

ans. decrease the partial pressure in water

167. Start advising company

ans. no, original owner

168. Community projects

ans. encourage employees to do community service/ volunteering

169. Leaks during heavy rains

ans. statute of limitation

170. Biddings with past employer

ans. II. Report to current employer

171. Slope from 0.5 to 1

ans. strain hardening

172. Minor losses

ans. decrease in pressure due to only friction losses