Scribd
Upload
253 views

Project Estimation and Total Hours For Mahad Project

This document provides a project man hours estimation for a piping 3D modeling project for a water block package at a site in Delhi, India with a duration of 2.5 months. It lists 21 tasks required for the project along with the estimated total hours and rate per hour. It then provides staffing details estimating a total of 11 staff are required including 1 piping engineer, 1 PDS admin, 2 PDS 3D modellers, 1 for 3D model reviews, and 1 checker. The total manhours estimated for the 3 month project is 1898 hours.

Uploaded by

Shishir Dwivedi
Copyright
© © All Rights Reserved
253 views

Project Estimation and Total Hours For Mahad Project

This document provides a project man hours estimation for a piping 3D modeling project for a water block package at a site in Delhi, India with a duration of 2.5 months. It lists 21 tasks required for the project along with the estimated total hours and rate per hour. It then provides staffing details estimating a total of 11 staff are required including 1 piping engineer, 1 PDS admin, 2 PDS 3D modellers, 1 for 3D model reviews, and 1 checker. The total manhours estimated for the 3 month project is 1898 hours.

Uploaded by

Shishir Dwivedi
Copyright
© © All Rights Reserved
You are on page 1/ 8

Client Name

Project Piping 3D Modeling for water block package


Site Address Delhi
Duration 2.5 MONTHS
Software AUTO CAD, PDS ver.12.00.01.13,Micro Station , MS OFFICE
Date 7/2/2019
Data Base Oracle 12g

PROJECT MAN HOURS ESTIMATION FOR 130 LINES


Sr. Discription
Total Hours
1 Document Index for your entire Scope of work. 20
2 One Point Project Co-ordination With Client 80
Preparation of Piping Material Specification, admin setup, Daily
3 administration & Troubleshooting (QTY 14 PMS) 140
Mechanical Equipment Modelling with nozzle details (As per your GA)
4 (Qty 30) 75
5 Civil & Structure Modelling As per Civil Drawing ( GA) 170
Piping 3D Model will include Piping rout design With help of GAD (Qty
6 130) 1040
7 Piping Support Modelling 24
8 Inline instrumentation Modelling as per P&ID 45
9 Electrical cable tray modelling. 45

Perform pipe stress static analysis for operating, sustain, occasional


10 and expansion load cases as per ASME B31.3 (Qty.25 lines) 0
To calculate the forces and moment on primary support from CAESAR
11 II 0

To check the nozzle allowable loads on mounted bullets due to piping.


12 Stresses and load on supports mark up on isometric drawings 0

13 Piping 3D Model Review 30%, 60% and 90% with client at Delhi Office 80
14 Piping 3D model checking with Read markup 35
Extraction of Piping layout from 3D Model Front and Top View with
15 Dimension 40
16 Extraction of Piping Isometrics with MTO from 3D Model 35
17 Piping Stress analysis with ISO mark up 0
18 Extraction Overall MTO from Model for Procurement 5
19 Electrical cable tray layout darwing from 3D Model 16
20 Other miscellaneous Drawing and activity 20
21 Project Templates Customization 10
Total Hours 1880
Rate Per Hour Amount Remark
400 8000
750 60000

950 133000

700 52500
700 119000

700 728000
600 14400
600 27000
650 29250

700 56000
700 24500

650 26000
600 21000
0
600 3000
600 9600
600 12000
750 7500
1330750
Client Name Driplex
Project Piping 3D Modeling for water block package
Site Address Delhi
Duration 2.5 MONTHS
Software AUTO CAD, PDS ver.12.00.01.13,Micro Station , MS OFFICE
Date 7/2/2019

PROJECT MAN HOURS ESTIMATION FOR 130 LINES


Sr. Discription Qty
1 Piping Engineer 1
2 PDS Admin for project Setup & PMS Creation 1
3 PDS 3D Modeller 2
4 Piping 3D Model Review 30%, 60% and 90% with client at Delhi Office 1
5 3D Model and Drawing checker 1
Total 11
Total Hours Per Day Per Month Hours Total Manhours for 3 Month Remark
4 104 260
6 150 150
16 416 1040
8 48 48
8 160 400
42 878 1898

You might also like