Scribd
Upload
1K views

Error Code Mid 185 - Pid 84 - Fmi 2

This document provides information on the fault code MID 185 - PID 84 - FMI 2, which indicates that the vehicle speed signal from the vehicle management ECU (G001) is absent or intermittent. This would cause the air management fault warning light to illuminate and prevent automatic acceleration. The troubleshooting process involves checking wiring harnesses and connectors for the air production management ECU (G051) and vehicle management ECU (G001) and using a Renault Trucks test tool to take measurements and note any fault codes.

Uploaded by

lampard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Error Code Mid 185 - Pid 84 - Fmi 2

This document provides information on the fault code MID 185 - PID 84 - FMI 2, which indicates that the vehicle speed signal from the vehicle management ECU (G001) is absent or intermittent. This would cause the air management fault warning light to illuminate and prevent automatic acceleration. The troubleshooting process involves checking wiring harnesses and connectors for the air production management ECU (G051) and vehicle management ECU (G001) and using a Renault Trucks test tool to take measurements and note any fault codes.

Uploaded by

lampard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

https://secureweb.renault-trucks.

com/K58WEBMR/web/controller

Fault code: MID 185 - PID 84 - FMI 2


General information on the fault code:
MID185 G051 - Air production management ECU

PID84 Vehicle speed

FMI-2 Data inexact or intermittent


Appliance(s) implicated:

Appliance(s) implicated:

G051 Air production management ECU

G001 Vehicle management ECU

Condition(s) and reason(s) for saving of fault code:

The signals normally transmitted by the component(s) G001 are absent.

Perceptible symptoms or "customer complaint" due to fault:

D107 Air management fault warning light

The warning light D049 comes on (D048: "STOP" warning light ; D049: "SERVICE" warning light).
Recording of the fault code by the ECU G051.
A demand for automatic acceleration of the vehicle is impossible.

The warning light D049 comes on (D048: "STOP" warning light ; D049: "SERVICE" warning light).

Recording of the fault code by the ECU G051.

A demand for automatic acceleration of the vehicle is impossible.

Troubleshooting and repair method:

https://secureweb.renault-trucks.com/K58WEBMR/web/controller (1 of 3)1/24/2012 9:17:41 AM


https://secureweb.renault-trucks.com/K58WEBMR/web/controller

IN NO CIRCUMSTANCE SHOULD THE "AIR PRODUCT MANAGEMENT" SYSTEM BE DISASSEMBLED.

Only the cartridge and the exhaust pipe can be subjected to maintenance.

In order not to damage the equipment, the repair steps should be carried out in the correct order.

General checks:

Check the general state of the function:

● The wiring harnesses and the fluids routing pipes are sound.
● The connectors are neither oxidized nor physically damaged.
● The connecting arrangement is not damaged.
● The connectors are properly plugged into their equipment.

Diagnostics using the RENAULT TRUCKS test tool:

Using the RENAULT TRUCKS test tool, perform the operation.

Advanced control and monitoring:

Measurements and diagnostics on the module G001 :

Illustration of the module G001 Location

https://secureweb.renault-trucks.com/K58WEBMR/web/controller (2 of 3)1/24/2012 9:17:41 AM


https://secureweb.renault-trucks.com/K58WEBMR/web/controller

Key: in the illustration above, the unit G001 is identified by item "A".

The location (see illustration above) is given as an indication only, for more precision, refer to the appropriate vehicle repair manual.

Preparation for tests and measurements:

Turn the ignition key to the "stop" position. Turn the master switch to the "OFF" position. Turn the master switch to the "ON" position. Erase the fault code then restart the engine. Check whether the code
is again recorded. If so, turn the ignition key to the "stop" position, turn the master switch back to the "OFF" position and wit for 30 seconds before undertaking any troubleshooting.

Tests and measurements:

Note down and process all the fault codes recorded in the appliances listed below.

MID144 G001 - Vehicle management ECU

https://secureweb.renault-trucks.com/K58WEBMR/web/controller (3 of 3)1/24/2012 9:17:41 AM

You might also like