Scribd
Upload
393 views

(ELECTRICAL CIRCUITS 2) Syllabus

This document provides a course syllabus for Electrical Circuits 2, a 4-unit course offered at the Technological Institute of the Philippines. The syllabus outlines the course code, name, credits, contact hours, instructor, textbooks, and other course details. Specific topics covered include analysis of RLC circuits with sinusoidal voltage, complex impedance, bridge circuits, power factor correction, resonant circuits, and two-port network parameters. By the end of the course, students will be able to analyze AC circuits, apply power factor correction, and conceptualize bridge circuits.

Uploaded by

Mark Dasigan
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
393 views

(ELECTRICAL CIRCUITS 2) Syllabus

This document provides a course syllabus for Electrical Circuits 2, a 4-unit course offered at the Technological Institute of the Philippines. The syllabus outlines the course code, name, credits, contact hours, instructor, textbooks, and other course details. Specific topics covered include analysis of RLC circuits with sinusoidal voltage, complex impedance, bridge circuits, power factor correction, resonant circuits, and two-port network parameters. By the end of the course, students will be able to analyze AC circuits, apply power factor correction, and conceptualize bridge circuits.

Uploaded by

Mark Dasigan
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES

COURSE SYLLABUS

COURSE CODE EE 003


COURSE NAME ELECTRICAL CIRCUITS 2
CREDITS 4 units (3 units lecture, 1 unit laboratory)
CONTACT HOURS 3 hours lecture, 3 hours laboratory
Engr. Eric L. Ybanez
INSTRUCTOR
Faculty Member, Electrical Engineering
Sadiku, M (2013), Applied Circuit Analysis. New York, New York:
TEXTBOOK
McGraw-Hill Inc.
Robbins, (2013). Circuit Analysis Theory and Practice (5th Edition).
New York: Delmar Cengage Learning
Dorf, Richard(2011). Introduction to Electric Circuits, 8th Ed. New
Jersey: John Wiley & Sons
Sadiku, M.N, & Alexander, C.K. (2013). Fundamentals of Electric
Other Supplemental
Circuits. New York, New York: MCGraw-Hill Inc.
Materials
Snyder, G.D. (2012). Problem Solving Guide for DC/AC. New Jersey:
Pearson Education.
Gibilisco, S. (2012). Electricity Demystified (2nd Ed.). New York, New
York: McGraw-Hill Inc.

SPECIFIC COURSE INFORMATION


a. Course Description
The course introduces the concept of instantaneous electric circuits. It provides the knowledge and
principles of AC circuits involving analysis of RLC circuits applied with sinusoidal voltage; complex
impedance, bridge circuits; analysis of complex circuits connected with different load impedance;
concept of power and power factor correction through power triangle relationship; resonant and tuned
circuits, two-port network parameters and transfer function and analysis of dynamic circuits with AC
excitation, basic principles of coupled circuits. The students are expected to demonstrate the knowledge
and principles of electric circuits in solving complex problem in electrical systems.

b. Prerequisites EE 002 ELECTRICAL CIRCUITS 1


Co-requisites MATH 011 ADVANCED ENGINEERING MATHEMATICS

c. Course Classification Required


(Required/elective/
selected elective)
SPECIFIC GOALS FOR THE COURSE
a. Course Objective
The course aims to provide knowledge and principles to students to enhance their critical thinking skills
in solving complex AC system through the principles of circuit analysis involving inductive, capacitive
and resistive load. The course also aims to characterize, evaluate and compare the output response both
in the time and frequency domain relative to the passive elements (resistance, capacitance and
inductance) impressed with sinusoidal voltage, to verify the behavior of ac system at with and without
static capacitor; analyze ac system under transient current condition, principles of AC bridge circuits and
application, Principles of Harmonics and Filters, and analysis of ac system involving Maximum Power
Transfer
TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
COURSE SYLLABUS

b. Course Outcomes
By the end of the course, the students will be able to:
1. Distinguish resistive, inductive and capacitive load circuits
2. Convert maximum values into root-mean squared values
3. Analyze ac circuits under condition of resonance frequency and during transient current
4. Use appropriate techniques in the analysis of ac circuits as applied with ac voltage
5. Evaluate the time response of series RL and RC circuits applied with ac voltage
6. Apply power factor correction in correcting power factor using power triangle method
7. Conceptualize ac bridge circuits as applied to ac system or equipment
c. Student Outcomes Addressed by the Course
a. apply knowledge of mathematics, science, and engineering to solve complex engineering
problems
COURSE TOPICS
Prelim Period (Weeks 1–6)
I. Introduction: TIP Vision and Mission; TIP Graduate Attributes/ Institutional Intended Learning
Outcomes; Program Objectives/ Program Intended Learning Outcomes; Course Objectives/ Course
Intended Learning Outcomes; Course Policies
II. Introduction to AC Electrical System and its Characteristics: Generation of Alternating
Current; Average and RMS Values; RLC Circuits; Sum of Voltages with Classical Method;
Impedance, and Phase Angle
III. Properties of AC Electric Circuits: Functional Transformation; Ohm’s Law in AC Circuits;
Phasor Voltage and Current; Impedance; Reactance; Susceptance; Parallel & Series Operation of
Load Impedances
Midterm Period (Week 7-12)
IV. Linear Bilateral Circuits: Analysis of Multiple Sources; Complex Circuits Analysis involving
Thevenin’s and Norton’s Theorems; Linear Bilateral Circuits involving Nodal Principles.
V. Power and Power Factor Analysis in Single-Phase and Three-Phase AC Circuits:; Power
Triangle; Power Factor Correction; Power in Multiple Loads of Inductive, Resistive, and Capacitive
Loads; Maximum Power Transfer
Final Period (Weeks 13–18)
VI. AC Circuits Involving Resonance and Tuned Circuits with Varying Frequency: Series and
Parallel Resonance in AC Circuits; Bandwidth Frequency; Harmonics, and Harmonic Filters
VII. Two-Port Network: Impedance Parameters; Admittance Parameters; Hybrid Parameters;
Transmission Parameters; Interconnection of Networks.

You might also like