Projects & Experience

Engineering for the Petroleum & Process Industries - ENPPI

 a. Oil Refining &
Petrochemicals and Chemicals
Experience

Engineering for the Petroleum & Process Industries - ENPPI

 Oil Refining

Engineering for the Petroleum & Process Industries - ENPPI

New CCR & Platforming Unit Project
2015 / 2018
Client: Alexandria National Refining & Petrochemicals Co. (ANRPC)
Project Description
The project aims to increase the capacity of the existing refinery by building a new Continuous
Catalytic Regeneration (CCR) & Plat-forming Unit with the relevant Regeneration Unit within its
premises, based on UOP extended License. The new CCR will be designed to process 604,000
T/Y of Hydro-treated Heavy Naphtha from the existing Naphtha Hydro-treating Units to
produce the following:
o Reformate with high Octane number (RON 100) utilized in the production of various
types of gasoline
o Stabilized LPG
o Hydrogen which will be utilized in downstream future processing facilities within
premises in Alexandria
Contract Type
Lump Sum for professional Services & Construction and Material Supply Cost Plus
Scope of Services
Detailed Engineering, Procurement and Material Supply, Construction including Construction,
Supervision, Commissioning & Start Up and Overall Project Management

New Vacuum Distillation Unit

2014 / 2017
Client: Suez Oil Processing Company (SOPC)
Project Description
The project aims to install a new vacuum distillation unit for asphalt production by removing
lighter fraction from long residue that is produced from the atmospheric distillation units
processing Land, Marine Balayiem or equivalent crude oil. The new VDU for Asphalt production
should be designed to produce 1,200 ton/day of asphalt and vapor gas oil.
Contract Type
Lump sum for professional services and material supply cost plus
Scope of Services
Basic & detailed engineering, procurement services, construction supervision, commissioning,
start up assistance and overall project management

Engineering for the Petroleum & Process Industries - ENPPI

New Vapor Recovery Unit
2014 / 2017
Client: Suez Oil Processing Company (SOPC)
Project Description
The project aims to install a new vapor recovery unit
instead of the demolished existing Unit to accommodate
the off gases from various gas streams generated by
processing units in addition to a new electrical substation
and a new control room. The new VRU unit design
capacity is 200,000 T/Y.
Contract Type
Lump sum for professional services and material supply
cost plus
Scope of Services
Basic & detailed engineering, procurement services,
construction supervision, commissioning, start up
assistance and overall project management

New Preflash Column System

2014 / 2016
Client: Middle East Oil Refinery (MIDOR)
Project Description
The project aims to install a New Pre-Flash Column to
decrease the Vapor Load at Crude fired Heater in order
to achieve design Unit throughput during processing
Crude Oils with Higher API gravity and/or increase the
CDU/VDU Unit-01 capacity to 115% in case of
processing Crude Oil with same design API.
Contract Type
Lump Sum
Scope of Services
Basic and Detailed Engineering, Commissioning and
Start-up Assistance

Engineering for the Petroleum & Process Industries - ENPPI

New Vapor Recovery Unit
2014 / 2016
Client: Assiut Oil Refining Company (ASORC)
Project Description
ASORC intends to build a New Vapor Recovery Unit
with a feed capacity of 400,000 TON/YR to be working
in parallel with the existing Vapor Recovery Unit and
to serve the new Crude Distillation Unit currently
under production since January 2003 with the
possibility to serve the old Crude Distillation Unit and
the future complex projects.
Contract Type
Lump sum
Scope of Services
 Basic and Detailed Engineering Services
 Procurement Services
 Construction Supervision
 Commissioning & start up Assistance

Installation of a New Naphtha Hydro Treating Unit

2009 / 2012
Client: Alexandria National Refining & Petrochemicals Co.
(ANRPC)
Project Description
The project aims to install a new Naphtha Hydro Treating
Unit with a capacity of 824000 metric ton per year
treated Naphtha
Contract Type
EPC Consortium with Petrojet (Enppi Leader)
Scope of Services
Detailed engineering, procurement services, consortium
activities including construction supervision and
management, commissioning and start-up supervision
Licensor: UOP

Engineering for the Petroleum & Process Industries - ENPPI

Engineering and Design Services Project
2008 / 2010
Client: Deir El Zor Petroleum Company (DEZPC)
Project Description
Provision of integrated technical services to execute various projects in Syria for Deir Ezzor
Petroleum Company (DEZPC). Through this contract, ENPPI will avail an integrated project team
of various specialists throughout the contract duration (2 years).
Contract Type
Reimbursable
Scope of Services
Engineering services

Assiut Grass Root Refinery, 2.5 MM T/Y

1999 / 2001
Client: Assiut Oil Refining Company (ASORC)
Project Description
The project aims to increase the refining capacity by 2 MT/Y to produce:
- 516,000 T/Y Diesel - 283,000 T/Y Naphtha
- 189,000 T/Y Kerosene - 1,000,000 T/Y Fuel Oil
Contract Type
Lump-sum for professional services, cost plus for material supply & construction
Scope of Services
EPCM contractor: detailed engineering, procurement, construction, commissioning & start-up
assistance, overall project management.

Light Naphtha Isomerization Plant

1997 / 1999

Client: Cairo Oil Refining Company (CORC)

Project Description
The project aims to install an Isomerization unit with a feed
capacity of 1000 T/D to improve the Octane number of light
Naphtha by using UOP license.
Contract Type
EPL turnkey – maximum ceil
Scope of Services
Detailed engineering, procurement, construction, supervision,
commissioning & start-up and overall project management
Licensor: UOP

Engineering for the Petroleum & Process Industries - ENPPI

Naphtha Isomerization
1997 / 1999

Client: Amreya Petroleum Refining Company (APRC)

Project Description
The project aims to install an Isomerization unit with a
feed capacity of 500 T/D to improve the octane number
of light Naphtha and using UOP License.
Contract Type
EPCM: Lump-sum professional services, material supply
disbursable and construction
Scope of Services
EPCM Contractor: detailed engineering, procurement,
construction, commissioning & start-up assistance and
overall project management
Licensor: UOP

Spent Lube Oil Re-refining Project

1994 / 1996

Client: Alexandria Petroleum Company (APC)

Project Description
Spent lube oil refining plant 30,000 tons/year feed of spent oil based on KTI, gas oil remover,
high vacuum distillation, lube hydro-finishing & fractionation.
Contract Type
EPCM: Lump-sum for professional services, material supply disbursable and construction
Scope of Services
EPCM Contractor: detailed engineering, procurement, construction, commissioning & start-up
assistance and overall project management
Licensor: KTI Know-how

Engineering for the Petroleum & Process Industries - ENPPI

Assiut Grass Root Refinery, 2.5 MM T/Y
1985 / 1987
Client: Assiut Oil Refining Company (ASORC)
Project Description
A grass root refinery 2.5 MM Tons/Year crude distillation unit,
a vapor recovery unit and LPG, Naphtha caustic wash units.
Contract Type
Lump sum for services & guaranteed maximum for materials
Scope of Services
ENPPI performed front end study, basic & detailed
engineering, procurement services & material supply, pre-
commissioning & start-up. ENPPI also arranged the project
finance from Lloyd’s bank, ECGD & SAE.

Gas Oil & Lube Oil Dewaxing

1994 / 1995
Client: Amerya Petroleum Refining Company (APRC)
Project Description
 Gas Oil Rate: 6,500 BPSD
 Lube Oil Rate: 2,500 BPSD
Scope of Services
Completion of MOBIL process package up to basic engineering, Detailed engineering and
Assistance in commissioning & start-up
Licensor: MOBIL research & development

Furfural Extraction Unit Revamp Project

1994 / 1995
Client: Alexandria Petroleum Company (APC)
Project Description
The project aimed to Converting the extraction method using Furfural as an extraction solvent
to using NMP (Normal Methyl 2-Pyroledone) because o the following:
 NMP is environmentally better than Furfural.
 NMP chemical characteristics that prefers it as a solvent.
Contract Type
Detailed Engineering services
Scope of Services
Carrying out the detailed design of the MP Refining Unit Revamp, Reviewing and
finalizing the P&ID's with full piping, Designations (including pipe specifications,
insulation thickness, valve, Designations), vendor equipment data and drain points, and
reviewing hydraulics system and plot layout to ensure unit performance matches
equipment specifications.
Licensor: Bechtel
Engineering for the Petroleum & Process Industries - ENPPI
Phenol Extraction Unit Upgrading to MP Refining Project

Client: Amerya Petroleum Refining Company (APRC)

Project Description
Converting the extraction method using Phenol as an extraction solvent to using NMP (Normal
Methyl 2-Pyroledone) because of the following:
 NMP is environmentally better than Phenol.
 NMP chemical characteristics that prefers it as a solvent.
 Shortage in Phenol production.
Contract Type
Detailed Engineering services
Scope of Services
 Carrying out the detailed design of the MP Refining Unit Revamp, reviewing and
finalizing the P&ID's with full piping, designations (including pipe specifications,
insulation thickness, valve, Designations), vendor equipment data and drain points and
reviewing hydraulics system and plot layout to ensure unit performance matches
equipment specifications
Licensor: Bechtel

Engineering for the Petroleum & Process Industries - ENPPI

 Chemicals & Petrochemicals

Engineering for the Petroleum & Process Industries - ENPPI

New Polyethylene Plant 400,000 MT/Y
2011 / 2015

Client: The Egyptian Ethylene and Derivatives

Company (ETHYDCO)
Project Description
The project aims to building a Polyethylene plant in
Alexandria with a Total capacity of 400 KTA, Linear
Low Density Polyethylene (LLDPE) and High Density
Polyethylene (HDPE) Through two trains of a
capacity 200 KTA each, using polymer grade
ethylene as feed stock.
Contract Type
EPC LSTK – Joint Venture ENPPI / Toyo engineering Corporation
Scope of Services
Engineering, Procurement, Construction and Overall Management
Licensor: UNIVATION TECHNOLOGIES LLC

Ethylene Cracker Project

2011 / 2015

Client: The Egyptian Ethylene and Derivatives

Company (ETHYDCO)
Project Description
The project aims to execution of the EPC scope of
work of the 460 KTA Ethylene and 20 KTA
Butadiene project at Ameriya in Alexandria,
Egypt.
Contract Type
EPC LSTK – Joint Venture ENPPI / Toyo
engineering Corporation
Scope of Services
Engineering, Procurement, Construction and Overall Management
Licensor: ABB LUMMUS, Global / BASF TEL

Engineering for the Petroleum & Process Industries - ENPPI

Ethydco Complex New Flare System
2013 / 2015

Client: The Egyptian Ethylene and Derivatives Company (ETHYDCO)

Project Description
The project aims to executea new flare system for the Ethylene Derivatives Complex in
Alexandria.
Contract Type
Lump Sum for Professional Services
Scope of Services
Basic and Detailed Engineering, Procurement, Contrsuction, Commissioning and start-up
Assistance.

Polystyrene Plant (EPC Phase)

2008 / 2012

Client: Egyptian Styrenics Production Company

(E-Styrenics)
Project Description
The new 200,000 tons/year polystyrene unit produces
high impact and general purpose high quality grades of
polystyrene, in addition to the supporting utilities and
Feed & Product storage & handling facilities.
Contract Type
EPC LSTK – Consortium with Petrojet (Enppi Leader)
Scope of Services
Detailed engineering, material supply, commissioning,
construction supervision, start-up &, overall management as consortium leader
Licensor: INEOS

Engineering for the Petroleum & Process Industries - ENPPI

Damietta Methanol Project
2007 / 2009
Client: Techint / E–Methanex
Project Description
Execution of Methanol plant with production
capacity of 3600 MTPD at Damietta-Egypt free zone
Contract Type
Professional services lump-sum
Scope of Services
Engineering services as S/C – Technit, ENPPI main
engineering activities; process engineering,
mechanical, piping, civil, Electrical &
Instrumentation

Project Management Services for Egyptian Polypropylene Project

2007/2010

Client: Egyptian Propylene &polypropylene

Company (EPP)
Project Description
The petrochemical complex; 350,000 MTA of
polymer grade propylene and 350,000 MTA
polypropylene (PP) as well as all associated utilities
and off-sites
Contract Type
Lump-sum for professional services
Scope of Services
Project Management Services on behalf of EPPC, UHDE is the EPC main contractor, ENPPI
scope covers all phases of engineering, procurement and construction.

Engineering for the Petroleum & Process Industries - ENPPI

Egyptian Linear Alkyl Benzene Project (ELAB)
2007/2009

Client: Egyptian Linear Alkyl Benzene (ELAB)

Project Description
The plant capacity is 100,000 ton per year of linear Alkyl Benzene. The main feeds for the
complex are Kerosene / Jet A-1 fuel from Alexandria Petroleum Company (APC) & Ameriya
Petroleum Refining Company (APRC), as well as, reformat and Hydrogen from Alexandria
National & Petrochemicals Company (ANRPC).
Contract Type: EPC LSTK
ENPPI Scope of Services
(PHASE I) Professional services - license selection, basic engineering based on UOP license
(PHASE II) Professional services - detailed engineering through consortium GS E&C Leader /
ENPPI / Petrojet
Licnesor: UOP

UHDE Granulation Plant

2003 / 2005

Client: Krupp, UHDE Gmbh

Project Description
The Project aims to fulfill the granulation process requirements of both Suez Fertilizer Company
& Alexandria Fertilizer Company. The granulation process aims to produce 1,200 T/D Ammonia
and 1,925 T/D Urea including utilities and off-site facilities.
Contract Type
Lump sum for professional services
Scope of Services
Detailed engineering & procurement Services

Engineering for the Petroleum & Process Industries - ENPPI

Lube Oil Blending Plant
1993 - 1995

Client: Misr Petroleum Company (MISR)

Project Description
The Project aimed to install Lube oil blending plant of
capacity 150,000 tons/year (one shift).
Contract Type
EPC Turnkey, lump sum for professional services,
disbursable for material supply and construction
Scope of Services
EPC Turn-key
Licensor: CELLIER know-how

Engineering for the Petroleum & Process Industries - ENPPI

 b. Gas Production & Processing

Engineering for the Petroleum & Process Industries - ENPPI

Assil & Karam Gas Development Project
2011 / 2015
Client: Client: Badr Petroleum Company (Bapetco)
Project Description
The project aims to the Installation of CO2 removal Plant,
utility facilities to support CO2 REMOVAL PLANT, 29KM
P/L, Gas turbine generator, Air cooler,2 Separators, Flare
Package.
Contract Type
Professional Services & Construction Lump-sum, Material
Disbursable – EPC Turnkey
Scope of Services
Detailed engineering, material supply, construction, commissioning & start-up

Qasr Gas Compression Project

2012 / 2015
Client: Khalda Petroleum Company (KPC) / Apache (Egypt)
Project Description
The project will add pressure boosting facilities (Turbo-Gas
Compressor) and associated utilities to the existing Qasr,
start-of-line (SOL) Plant located in the Egyptian Western
Desert.
Contract Type
EPC LSTK (ENPPI Main Contractor)
Scope of Services
Engineering, procurement, Construction, Commissioning &
Start-up and overall management

Engineering for the Petroleum & Process Industries - ENPPI

West Harbor Expansion Project
2010 / 2015
Client: Pharaonic Petroleum Company (PhPC)
Project Description
The project aims to expand West Harbor facility,
which is currently processing 280 MMSCFD from
Ha’py and 265 MMSCFD from Taurt fields; by
providing an additional HP stage Compression Train
and Expand the plant design capacity to 585
MMSCFD
Contract Type
EPC LSTK (ENPPI Main Contractor)
Scope of Services
Engineering, Material Supply, Construction, Commissioning and Start-up and Overall
Management

Phase VII Main Compression Onshore Project

2009 / 2012
Client: Burullus Gas Company (Burullus)
Project Description
The project aims to the installation of a new 5x25%
gas turbine driven compression trains, for Burullus
Gas Company (a joint venture with BG), with a
capacity of 642 Million Standard Cubic Feet per day
in the 7th phase of Idku Hub plant, to accommodate
the pressure declination of the plant inlet pressure
from 58 to 30 bar gauge.
It also includes a new Finger type slug catcher, High
Pressure Separators and all supporting utilities.
Contract Type
EPC LSTK (ENPPI Main Contractor)
Scope of Services
Basic & detailed engineering, Project Management, material supply, construction,
commissioning & start-up

Engineering for the Petroleum & Process Industries - ENPPI

Yanbu Gas Plant Expansion
2006 / 2009
Client: Saudi Aramco
Project Description
The project aims to expand Yanbu NGL plant capacity from
390 to 585 MBOD. The work scope includes 195 MBOD de-
Ethanizer with ancillaries and propane, refrigeration
system, feed to the existing de-Propanizer and de-Butanizer
columns, construction of substation with process interface
room and expansion of DCS and ESD systems.
Contract Type
EPC LSTK (ENPPI Main Contractor)
Scope of Services
Detailed engineering, material supply, construction, commissioning & start-up

Extraction and Compression Project

Client: Petróleos de Venezuela, S.A. (PDVSA)
Project Description
The project aims to install a new NGL extraction
plant in San Joaquin with a processing capacity of
1000 MMSCFD of natural gas.
Contract Type
Lump-sum for professional services & material
supply cost plus
Scope of Services
Basic & detailed engineering & procurement
services

Engineering for the Petroleum & Process Industries - ENPPI

PAGMI Project Phase I & II Gas conditioning for Domestic Market
2007 / 2013 (Different Phases)

Client: Petróleos de Venezuela, S.A. (PDVSA)

Project Description
Treating & Conditioning of gas produced from the
offshore area in Northeastern Venezuela to be used in
the domestic market in the PDVSA Complex, located
in Güİria, Estado Sucre – Venezuela.
Phase I: Conditioning of 600 MMSCFD from Dragon
field (mainly Methane saturated with water),
molecular sieve dehydration package and all required
utilities to accomplish the domestic market
requirements.
Phase II: Treatment of 1000 MMSCFD gas & 20197
STD bpd condensate. There will be an additional
dehydration module (module B) parallel to module A
in PAGMI phase I with a capacity of 600 MMSCFD with different outlet water content.
Contract Type
EPCM – Lump-sum for professional services, material supply cost plus and unit rates for
construction works
Scope of Services
Basic engineering review, detailed engineering and procurement services for long lead
equipment, construction management and overall management for phase I. Conceptual
engineering and basic and detailed engineering for phase II

Khursaniyah Gas Plant

2005 / 2006
Client: Saudi Aramco / Bechtel
Project Description
The Khursaniyah gas plant includes two gas-conditioning trains, ethane and natural gas liquids
recovery units process 1000 MMSCFD of natural gas, produce 550 MMSCFD sales gas, 240,000 BL/D
ethane / natural gas liquids, and 1,800 metric tons / day sulfur. The complex will process natural
gas from three onshore fields in the eastern province: Abu Hadriya, Fadhili, and Khursaniyah.
Contract Type
Professional services - reimbursable basis
Scope of Services
Engineering services (main contractor – Bechtel)

Engineering for the Petroleum & Process Industries - ENPPI

Ethane Recovery Project

Client: Petróleos de Venezuela, S.A. (PDVSA)

Project Description
Installation of 2200 MMSCFD gas sweetening plant to
completely remove the CO2 / H2S and CO2 dehydration
for the natural gas upstream. The extraction facilities in
ANACO and the dehydrated CO2 (200 MMSCFD) will be
used for well gas lift, in addition to retrofit of the San
Joaquin extraction facilities Trains A & B to achieve 98 %
ethane recovery. The scope includes provision of
molecular sieve dehydration package along with its
regeneration
(H2O plus CO2 200 MMSCFD – well gas lift.)
Contract Type
Lump sum for professional services
Scope of Services
Basic & detailed engineering for sweetening package (ISBL), detailed engineering for C2
extraction unit (ISBL) and overall project management & coordination

Fractionation Capacity Increase at Jose (ACFJ) Project

Client: Petróleos de Venezuela, S.A. (PDVSA)

Project Description
Development of new facilities to process the
increase of NGL capacity to 50000 BPD in order
to cover the requirements of the 1st phase of
NGL production increase. Each fractionation
train will be designed to produce propane, ISO-
butane, n-butane, pentanes, gasoline, and
heavy ends.
Contract Type
Lump sum for professional services / material
supply cost plus
Scope of Services
Conceptual design, basic & detailed engineering, procurement services and construction
supervision

Engineering for the Petroleum & Process Industries - ENPPI

Al-Khafji Field Development – Phase 1
2006 / 2010
Client: Al-Khafji Joint Operations (KJO)
Project Description
The field development for Khafji has been developed
to maintain the maximum sustainable capacity of
300,000 Barrel Oil per Day and production of 125
Million Standard Cubic Feet Per Day of Associated
gases, as well as, 50 Million Standard Cubic Feet Per
Day gas lift, by installation of 6 new platforms, 8500
tons total structure weight and modification of 9
existing platforms, in addition to subsea pipelines
with a total length of 110 kilometer sizing 24 inches,
28 inches, 36 inches and 42 inches and laying of 59
km subsea cables.
Contract Type
Consortium (Enppi – Petrojet - PMS - Rawabi) LSTK
Scope of Services
Engineering, material supply, supervision of onshore structure fabrication & offshore
laying/installation, overall management, consortium leader and commissioning & start-up

Obayied Pre-Compression Project

2006 / 2009
Client: Badr Petroleum Company (BAPETCO)
Project Description
The project aims to restore Obayied Gas
Plant (OGP) compression capacity by 420
MMSCFD through the installation of
2x50% compression train facilities to
upgrade OGP pressure from 25 to 86
barg.
Contract Type
EPC turnkey – Lump-sum for professional
services and construction works and
disbursable for material supply
Scope of Services
Detailed engineering, procurement, construction supervision, commissioning & start-up
assistance and overall project management

Engineering for the Petroleum & Process Industries - ENPPI

Sapphire Gas Development Project
2003 / 2005
Client: Burullus Gas Company (Burullus)
Project Description
Extension to the onshore existing
Scarab/Saffron and Simian/Sienna facility to
treat 665 MMSCFD of natural gas produced
from Sapphire offshore deepwater fields to
feed the onshore Egyptian LNG Plant.
Contract Type
EPC Lump-sum turnkey – consortium
Scope of Services
Consortium leader, overall Project
management, basic & detailed engineering,
procurement services, construction supervision, commissioning & start-up assistance

Simian / Sienna Gas Development Project

2003 / 2005
Client: Burullus Gas Company (Burullus)
Project Description
Extension to the onshore existing
Scarab/Saffron facility to treat 665 MMSCFD
of natural gas produced from Simian / Sienna
offshore deep water fields to feed the
onshore Egyptian LNG Plant.
Contract Type
EPC Lump-sum turnkey – consortium
Scope of Services
Consortium leader, overall project
management, basic & detailed engineering, procurement services, construction supervision,
commissioning & start-up assistance

Engineering for the Petroleum & Process Industries - ENPPI

Maximization of C2 / C3 from Western Desert Gas Fields
2005 / 2012 (Different Phases)

Client: The Egyptian Natural Gas Company (GASCO)

Project Description
The project aims to maximize C2 & C3
recovery in the Western Desert Gas Complex
and Amerya Liquefied Petroleum Gas (LPG)
plant. The recovered C2 & C3 in Amerya LPG
plant will be transferred to Western Desert
Gas Complex through a 12 inch pipeline to
be processed within Western Desert Gas
Complex, where the storage and loading
facilities exist.
The project was executed in three phases; the 1st tends to reach a production of 600 million
standard cubic feet per day, the 2nd stage tends to reach a production of 800 million standard
cubic feet per day, and finally to reach by the 3rd phase a total production of 900 million
standard cubic feet per day.
Contract Type
Lump-sum for professional services / material supply disbursable
Scope of Services
EPCM: Techno-Economic / Feasibility Study, Basic and Detailed Engineering, Procurement,
Construction Supervision, Commissioning & Start Up Assistance & Overall Project Management.

Western Desert Gas Complex

1997 / 2000

Client: The Egyptian Natural Gas Company (GASCO)

Project Description
The project aims to the treatment of 550 million standard cubic feet per day of natural gas
produced from the western desert (Obaiyed, Salam and Tarek), to produce ethane & propane
mixture of downstream ethylene and polyethylene production, commercial propane, sales gas,
Liquefied Petroleum Gas (LPG) and condensate.
Contract Type
Lump-sum for professional services and disbursable for material supply
Scope of Services
EPCM: Techno-Economic / Feasibility Study, Basic and Detailed Engineering, Procurement,
Construction Supervision, Commissioning & Start Up Assistance & Overall Project Management.

Engineering for the Petroleum & Process Industries - ENPPI

NGL Project at Port Said
2001 / 2004

Client: United Gas Derivatives Company (UGDC) (BP / Eni / GASCO)

Project Description
Installation of processing facilities for
1100 MMSCFD feed of natural gases
produced from El- Gamil & HA’PY fields to
produce propane, LPG, and condensates
(dehydration package: 1100 MMSCFD
molecular sieve one train).
Contract Type
Lump-sum for professional services and
material supply disbursable
Scope of Services
EPCM: Basic Engineering Review, Detailed Engineering and Procurement, Construction,
Commissioning & Start-Up Assistance and Overall Project Management

Damietta Export Facilities

2001 / 2004
Client: United Gas Derivatives Company
(UGDC)
Project Description
Installation of Marine export facilities –
cryogenic tank capacity (30,000m3) for
propane storage produced from Port
Said NGL process facilities
Contract Type
EPC turnkey – consortium (ENPPI /
Tractebel) – lump-sum for professional services, cost plus fees for material supply and
construction work
Scope of Services
FEED & detailed engineering, procurement, construction, commissioning, & start-up assistance

Engineering for the Petroleum & Process Industries - ENPPI

Professional Services for Denise Platform
2006 / 2008
Client: Belayim Petroleum Company (Petrobel)
Project Description
Upgrade of TNW2 existing platform to suit Denise gas field production, transmit additional
capacity to onshore via 61 KM 32” offshore pipeline and 1 KM 32” pipeline onshore and
upgrade of El Gamil onshore facilities.
Contract Type
Lump sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Semman Field Development

2006 / 2008
Client: Belayim Petroleum Company (Petrobel)
Project Description
Installation of new Semman platform (tripod plus
deck) and laying of new 18” sea line from Semman to
existing Darfeel platform with total length 20 Km.
Contract Type
Professional services reimbursable
Scope of Services
Basic engineering review, detailed engineering and procurement services

Taurt Onshore Detailed Engineering

2006 / 2007
Client: Gulf of Suez Petroleum Company (GUPCO)
Project Description
GUPCO intends to develop Taurt field through a sub-sea production system (SPS) that consists
of 7 sub-sea wells tied with a manifold with well testing capability.
Contract Type
Professional services reimbursable
Scope of Services
Detailed Engineering for onshore part of Taurt gas field development project

Engineering for the Petroleum & Process Industries - ENPPI

Offshore North Sinai Field Development ONS
2005 / 2007 - NOSPCO
Client: The Egyptian Natural Gas Company (GASCO)
Project Description
Development of Tao offshore gas field, 60 km north of
Rommana producing 130 MMSCFD of gas. The
development includes offshore production wells,
production platform, submarine pipeline, onshore gas
treatment plant and sales gas pipeline, in addition to gas
dehydration.
Contract Type
Lump-Sum for professional services and disbursable for
material supply
Scope of Services
Detailed engineering for offshore topside facilities and
onshore gas central processing facility, overall
procurement services except pipelines and offshore
structure steel, and construction supervision

Temsah – 4 Platform
2005 / 2007
Client: Belayim Petroleum Company (Petrobel)
Project Description
Installation of a new platform: 4 legs, 12-slot unmanned
fixed offshore production platform at 85 m water depth
and a capacity of 10 MMSCMD gas plus 3000 BPD
condensate.
Contract Type
Lump-sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Engineering for the Petroleum & Process Industries - ENPPI

Baltim-N Platform
2003 / 2005

Client: Belayim Petroleum Company (Petrobel )

Project Description
The project aims to install 4 legs 9-slots tubular steel frame jacket, and a fixed offshore
production platform with a capacity of 4.7 MMSCMD Gas. Gas & Condensate are directed to
Baltim east existing platform through an 18" Pipeline.
Contract Type
Lump sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Barboni Platform
2003 / 2005
Client: Belayim Petroleum Company (Petrobel)
Project Description
The project aims to install a new platform in 91 m Water
Depth, Capacity of 4.4 MMSCMD. Gas is transmitted to
Noras P.L.E.M. via 26” subsea pipeline.
Contract Type
Lump-sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Rashid-2 Platform Project

2003 / 2004
Client: Rashid Petroleum Company (RASHPETCO)
Project Description
The project aims to install 4 legged unmanned steel jacket
platform located at Rosetta 49 m water depth with a
capacity of 265 MMSCFD and weighing 450 tons. The gas is
transmitted through a 24” subsea pipeline to the onshore
terminal for final processing, along with 3 (1X70 mm2)
XLPE 12/20 KV 61 KM submarine cable with optical fiber
bundle
Contract Type
Lump-sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Engineering for the Petroleum & Process Industries - ENPPI

Amerya LPG Recovery Plant
Client: Egyptian General Petroleum Corporation (EGPC)
Project Description
The project aims to install LPG recovery plant with
inlet gas production capacity of 300 MMSCFD
producing 360 T/D of LPG. The scope includes
dehydration: 330 MMSCFD molecular sieve one
train.
Contract Type
Lump-sum for professional services and disbursable
for material supply and construction work
Scope of Services
Basic & detailed engineering and procurement
services, construction supervision, commissioning &
start-up assistance

Damietta LNG project

2002 / 2005
Client: SEGAS - Union Fenosa – M.W. Kellogg – UK
Project Description
The Project aims to install LNG plant at Damietta
with production of 4.7 MMTY of LNG.
Contract Type
Lump-sum for engineering services, reimbursable
for procurement services & construction supervision
Scope of Services
Detailed engineering for fractionators unit,
procurement services & construction supervision

Engineering for the Petroleum & Process Industries - ENPPI

Egyptian LNG Project
2002 / 2005

Client: The Egyptian Liquefied Natural Gas Company

(ELNG)
Project Description
The 1st LNG project in Egypt, two trains LNG plant with
a capacity of 3.6 MMTY LNG productions each, located
In Idku, Beheira - Northern Coast of Egypt.
Contract Type
S/C. Lump sum for engineering services – Bechtel
Houston
Scope of Services
Detailed engineering for: Inlet treating unit, buildings
for power generation, LNG storage, flares, marine facilities & utilities

Rosetta Gas Field Development

1998 / 2000
Client: Rashid Petroleum Company (RASHPETCO)
Project Description
The project aims to install offshore production platform with a capacity of 275 MMSCFD. Gas is
transmitted through a 24” gas subsea P/L 67 km to onshore terminal.
Contract Type
Lump sum for basic & detailed engineering reimbursable for construction supervision,
commissioning and start-up assistance
Scope of Services
Detailed engineering, procurement services, construction supervision, commissioning & start-
up assistance

Engineering for the Petroleum & Process Industries - ENPPI

Transgulf LPG Plant
1995 / 1999
Client: Egyptian General Petroleum Corporation
(EGPC)
Project Description
Inlet gas production 130 MMSCFD - produce 960 T/D
of LPG. The scope includes provision of molecular sieve
dehydration package along with its regeneration 130
MMSCFD one train.
Contract Type
EPC turnkey - Lump sum for professional services and
disbursable for material supply and construction works
Scope of Services
Detailed engineering, procurement services,
construction supervision, commissioning and start-up
assistance

Qantara Field Development

2000 / 2001
Client: Qantara Petroleum Company (QPC)
Project Description
Development of Qantara field with a total capacity of 8 MMSCFD to produce:
- 6 MMSCFD sales gas transferred to GASCO gas grid manifold through a 6” Pipeline 0.4 Km.
- 1000 BBL/Day transferred to the petroleum pipeline company 12”condensate pipeline
through 4” pipeline to the Suez Refinery.
Contract Type
EPC Lump-sum turnkey
Scope of Services
Detailed engineering, material supply, construction, commissioning & start-up

Engineering for the Petroleum & Process Industries - ENPPI

Bed 2 Field Development
Client: Egyptian General Petroleum Corporation (EGPC)
Project Description
Bed 2 gas field includes a gas gathering and gas liquid separation, one gas production train, 180
MMCFD, train contains production separator, glycol dehydration unit and inter field pipelines
between Bed-2 & Bed-3, in addition to third gas train in Bed-3. The scope also includes
provision of TEG Dehydration package along with its regeneration.
Contract Type
Reimbursable MHR's
Scope of Services
Basic and detailed engineering as subcontractor through COMPRIMO

Bed 3 Field Development

Client: Egyptian General Petroleum Corporation (EGPC)
Project Description
Two identical gas conditioning trains, 90 MMSCFD capacity each, trains contains production
separator, glycol dehydration unit, turbo-expander, LTS and sales gas compressor, the third
train was added due to increase Bed-2 supply increase, oil production trains produces oil at 3
different levels with total capacity of 40,000 BBLD. The scope includes provision of Triethylene
Glycol Dehydration package along with its regeneration.
Contract Type
Reimbursable MHR's
Scope of Services
Basic engineering, (subcontract of detailed engineering – International Bechtel Incorporation IBI
UK) in addition to procurement services

Abu Sannan Condensate Recovery Plant

1988 / 1990
Client: General Petroleum Company (GPC)
Project Description
Gathering of 85 MMSCFD of natural gas from three gas fields (T, Y & Bed 1) through pipelines
and delivered to a central processing area where condensate is recovered and spiked into GPC
existing crude pipelines. The scope also includes provision of Tri-ethylene Glycol Dehydration
package along with its regeneration.
Contract Type
Lump sum for professional services & disbursable for material supply and construction work
reimbursable
Scope of Services
Detailed engineering, material supply, construction, commissioning & start-up

Engineering for the Petroleum & Process Industries - ENPPI

Abu Madi LPG Recovery
1989 / 1992
Client: Belayim Petroleum Company (Petrobel)
Project Description
The plant is designed to treat 260 MMSCFD produced at existing LTS units in order to recover
LPG and condensate and deliver sales gas to users - dehydration: 260 MMSCFD Molecular Sieve.
Contract Type
Reimbursable maximum ceil man-hours
Scope of Services
Project management including basic and detailed engineering review and procurement
services, in addition to partial detailed engineering and survey services as subcontractor to
Snamprogetti

Engineering for the Petroleum & Process Industries - ENPPI

 c. Crude Oil Production

Engineering for the Petroleum & Process Industries - ENPPI

Kalabsha Development Project
2010 / 2012

Client: Khalda Petreolum Company (KPC)

Project Description
The project aims to develop the facilities at Kalabsha and overcome the downstream
bottlenecking till the receiving point at El Hamra facilities.
 1st Phase: To produce 20,000 BOPD (completed)
 2nd Phase: To produce 40,000 BOPD
Contract Type
EP scope: Lump-sum for Professional services and
Cost Plus for Material Supply
Scope of Services
Basic and Detailed Engineering, procurement and
Material supply

Kharir Development Project

2008 / 2010

Client: Total E&P Yemen

Project Description
The project aims to the installation of crude stabilization unit with capacity of 30,000 Barrel per
day. The unit includes oil separator, water bath heater, crude storage and export pumps, as
well as, supporting utilities. The Project is situated in Kharir at Hadramout, 600 Kilometer from
Sana’a in Yemen
Contract Type
EPC LSTK Consortium with Petrojet (Enppi Leader)
Scope of Services
Engineering, material supply, construction supervision, project management, commissioning,
start-up assistance & consortium leader

Engineering for the Petroleum & Process Industries - ENPPI

Safaniya Water Disposal System Upgrade
2006 / 2009
Client: Saudi Aramco
Project Description
The project will expand Safaniya Arabian Heavy
Crude and Utilities Plants to maintain the plant's
crude oil demand until 2011. New facilities shall be
added to overcome the expected increase of
Water Content from 17% to 35% in Safaniya Crude
oil by 2011; which allows for increasing maximum
sustain rates & water wash from 383 to 805
MBOD:
 3 Low Pressure Production Trap (LPPT)
phase separators – 1053 MBOD separation
 3 Formation Water Draw-off pumps – 318 MBOD
 6 Corrugated Plate Interceptors CPI’s – Total rating 364 MBOD
 Formation Water Treatment – Rated by 847 MBOD
 Additional 230 KV electric feeders, Others: Substation / Control System / Utilities
Contract Type
EPC LSTK (Main Contractor)
Scope of Services
Engineering, material supply, construction, commissioning & start-up and overall management

Al-Khafji Field Development – Phase 1

2006 / 2010
Client: Al-Khafji Joint Operations (KJO)
Project Description
The field development for Khafji has been developed
to maintain the maximum sustainable capacity of
300,000 Barrel Oil per Day and production of 125
Million Standard Cubic Feet Per Day of Associated
gases, as well as, 50 Million Standard Cubic Feet Per
Day gas lift, by installation of 6 new platforms, 8500
tons total structure weight and modification of 9
existing platforms, in addition to subsea pipelines with
a total length of 110 kilometer sizing 24 inches, 28
inches, 36 inches and 42 inches and laying of 59 kilometer subsea cables.
Contract Type Consortium (Enppi – Petrojet - PMS - Rawabi) LSTK
Scope of Services
Engineering, material supply, supervision of onshore structure fabrication & offshore
laying/installation, overall management, consortium leader and commissioning & start-up
Engineering for the Petroleum & Process Industries - ENPPI
GUPCO Rehabilitation Project
2005 / 2015 (Long-Term Contract)

Client: Gulf of Suez Petroleum Company (GUPCO)

Project Description
The project aims to the Rehabilitation of BP offshore facilities including steel structural
platforms, topside facilities and subsea pipelines. The offshore facilities consist of 9 complexes
& 69 satellites (with an overall count of 119 platforms and 400 wells) and 1600 km of sub-sea
pipelines.
The aim of the overall rehabilitation project was to make sure that the whole system could
safely operate for at least additional 25 years maintaining the best possible operating
conditions and capacities. A qualitative risk based approach had been followed for the whole
119 platforms in order to evaluate the hazard of structural failure.
Contract Type
Professional services and cost plus for material & subcontractors
Scope of Services
EPCM: basic & detailed engineering, procurement services & construction management

Tanak / Omar Vapor Recovery / Tanak Water Injection

2001 / 2003

Client: Al Furat Petroleum Company

Project Description
2 associated vapor recovery units, capacity 2.7 MMSCFD & 3.5 MMSCFD ; new Water injection
unit 900 cubic meter/hour at Tanak area, related pipelines 36 Km 10”, 11 Km 8”, 4 Km 4” and
utilities.
Contract Type
Lump-sum turnkey
Scope of Services
Basic & detailed engineering, construction, procurement, material supply, commissioning &
start-up

Engineering for the Petroleum & Process Industries - ENPPI

SABAN / JARNOF - AZRAK / MALEH
1999 / 2000

Client: Al Furat Petroleum Company

Project Description
Upgrade the maximum production capacity of Saban/Jarnof field to 45,000 b/d and upgrade
production capacity of Azraq / Maleh field from 35,000 to 55,000 b/d and installation of a new
8.4 km - 10” pipeline.
Contract Type
EPC LSTK (Main Contractor)
Scope of Services
Basic / detailed engineering, construction, procurement, material supply, commissioning &
start-up

Crude Treatment Plant (RAS BAKR)

1999 / 2001
Client: General Petroleum Company (GPC)
Project Description
Treatment for oil with a capacity of 50,000 B/D, including water separation and desalination
units.
Contract Type
Lump-sum professional services, disbursable for material supply and construction
Scope of Services
Basic / detailed engineering, construction, procurement, material supply, commissioning &
start-up and Overall Management

Engineering for the Petroleum & Process Industries - ENPPI

Meleiha Field Development
1997 / 1999

Client: Agiba Petroleum Company (AGIBA)

Project Description
Upgrade the existing production facilities to accommodate the additional condensate received
from El Obayied Field.
Contract Type
Lump-sum for professional services, disbursable for material supply and construction
Scope of Services
Basic / detailed engineering, construction, procurement, material supply, commissioning &
start-up

Ras Qattara (El Faras) South Field Development

1996 / 1997

Client: Agiba Petroleum Company (AGIBA)

Project Description
Production capacity is 10,000 BBL/D. The project includes pipeline, gathering system, flow
station, utilities and storage. Pipeline system includes transfer pumps, pipeline 55 Km, 6 inch to
tie-in flow station with BAPETCO.
Contract Type
Lump sum for professional services, disbursable for equipment, materials and construction
Scope of Services
Basic & detailed engineering, procurement, construction supervision, commissioning, start-up
and project management services

Engineering for the Petroleum & Process Industries - ENPPI

Port Fouad Gas Field Development
1994 / 1996

Client: Belayim Petroleum Company (Petrobel)

Project Description
1. Offshore Facilities: Four legs (27m water depth) Unmanned platform for the installation of
the wellheads, test and production separators, glycol injection facilities produced water
separation, treatment and disposal pig traps.
2. Sealines: 12” mixed phase sealine (44 km) for the transportation of the recombined gas and
condensate stream, 3” sealine for glycol supply.
3. Onshore Facilities: slug catcher, LTS unit, condensate stabilization unit, and floating roof
tanks to store gasoline, dry gas centrifugal compressor.
4. Transportation to Port Said: 14” pipeline (20 km) for dry gas transportation.
Contract Type
Reimbursable, Lump sum
Scope of Services
Basic engineering review, engineering and procurement assistance for onshore facilities

SUMED Pipeline Throughput Achievement

1992 / 1994

Client: Arab Petroleum Pipelines Co. (SUMED)

Project Description
Crude pipeline throughput achievement from 80 to 117 MM T/Y consisting of three areas as
follows:
 Ain Sukhna: Effluent treatment System (1000 M3/H) Expansion
 Dahshour: Two new pumping Stations (three pumps 8000 M3/H each) site facilities
 Sidi Kreir: three pumps 4000 M3/H each
Contract Type
EPCM Contractor: Lump-sum for professional services, disbursable for material supply and
construction
Scope of Services
Basic & detailed engineering, procurement services, construction supervision, commissioning,
& start-Up

Engineering for the Petroleum & Process Industries - ENPPI

 d. Pipelines Experience

Engineering for the Petroleum & Process Industries - ENPPI

 Offshore Pipelines Experience

Engineering for the Petroleum & Process Industries - ENPPI

Al-Khafji Field Development – Phase 1
2006 / 2010

Client: Al-Khafji Joint Operations (KJO)

Project Description
The field development for Khafji has been developed
to maintain the maximum sustainable capacity of
300,000 BOPD and production of 125 MMSCFD of
associated gases, as well as, 50 MMSCFD gas lift, by
installation of 6 new platforms, 8500 tons total
structure weight and modification of 9 existing
platforms, in addition to subsea pipelines with a
total length of 110 km sizing 24”, 28”, 36” and 42 “
and laying of 59 km subsea cables.
Sizing / length
Total Pipelines length 110 km, sizes 24” / 28” / 36” / 42” and laying of subsea cables with a total
length of 59 km
Contract Type
Consortium (Enppi – Petrojet - PMS - Rawabi) LSTK
Scope of Services
Engineering, material supply, supervision of onshore structure fabrication & offshore
laying/installation, overall management, consortium leader and commissioning & start-up

Semman Field Development

2006 / 2008

Client: Belayim Petroleum Company (Petrobel)

Project Description
Installation of new Semman platform (tripod plus
deck) and laying of new 18” sea line from Semman to
existing Darfeel platform with a total length of 20 Km,
top site facilities of Semman platform will be operated
by Blown down system.
Sizing / length
18” 20 km subsea P/L
Contract Type
Lump Sum for professional services
Scope of Services
FEED review, detailed engineering and procurement
services

Engineering for the Petroleum & Process Industries - ENPPI

Professional Services for Denise Platform
2006 / 2008
Client: Belayim Petroleum Company (Petrobel)
Project Description
Upgrade of TNW2 existing platform to suit Denise gas field production, transmit additional
capacity to onshore via 61 KM 32” offshore pipeline and 1 KM 32” pipeline onshore.
Sizing / length
61 KM 32" Offshore Pipeline & 1 KM 32" Onshore
Contract Type
Lump Sum for professional services
Scope of Services
FEED, detailed engineering and procurement services

Anshoga Field Development Project

Client: Belayim Petroleum Company (Petrobel)
Project Description
Anshoga filed one tripod platform accommodate two wells & 18” sealine, 6.2km to transport
produced gas to existing plem at Nouras “A” area.
Sizing / length
18” 6km
Contract Type
Lump Sum for professional services
Scope of Services
FEED, detailed engineering and procurement services

Temsah – 4 Platform
2005 / 2007
Client: Belayim Petroleum Company (Petrobel)
Project Description
The project aims to install 4 legs, 12-slot unmanned fixed
offshore production platform at 85 m water depth and
capacity of 10 MMSCFD gas plus 3000 BBLD condensate.
Sizing / length
24" gas pipeline 5.5 Km, 10" condensate P/L 5.5 Km, 4"
produced water 5.5 Km and 3" instrument gas 5.5 Km-
offshore
Contract Type
Lump Sum for professional services
Scope of Services
FEED, detailed engineering & procurement services

Engineering for the Petroleum & Process Industries - ENPPI

Temsah N.W. Platform TNWP-2

Client: Belayim Petroleum Company (Petrobel)

Project Description
New Temsah North West platform TNWP-2 and associated sealine
Sizing / length
24” 2km gas, 10” 2km condensate, 4” 2km water and 3” 2km glycol
Contract Type
Lump Sum for professional services
Scope of Services
Engineering and procurement services

Baltim-N Platform
2003 / 2005

Client: Belayim Petroleum Company (Petrobel)

Project Description
The project aims to install 4 legs 9-slots tubular steel frame jacket, and a fixed offshore
production platform with a Capacity of 4.7 MMSCMD Gas. Gas & Condensate are directed to
Baltim east existing platform through an 18" Pipeline.
Sizing / length
18” gas pipeline 20km & 4” produced water 20km offshore
Contract Type
Lump Sum for professional services
Scope of Services
FEED, detailed engineering & procurement services

PF-D & RPP Development

2003 / 2005

Client: Belayim Petroleum Company (Petrobel)

Project Description
The project aims to install sealine; new well, new offshore structure PF-D will be located on the
well to deliver the production through 12” sealine to RPP platform
Sizing / length
26” gas 55km, 12” multiphase 5km and 3” 5km instrument gas
Contract Type
Lump Sum for professional services
Scope of Services
FEED review, detailed engineering & procurement services

Engineering for the Petroleum & Process Industries - ENPPI

 Onshore Pipelines Experience

Engineering for the Petroleum & Process Industries - ENPPI

Provision of PMC for Missan Oil Export Pipeline (MOEP)
2013 / 2015

Client: PetroChina Company Limited

Project Description
Missan 42” Oil export pipeline is designed to handle
1,000,000 BOPD, and starts at the designated Halfaya
junction point (meeting point of Halfaya and Buzurgan
oil field branch pipelines) in Missan Governorate.
The pipeline is divided into two segments; Segment
“A” extends for 121 km between Halfaya and Bin-Umr,
while Segment “B” extends for 151 km between Bin-
Umr and Faw terminal.The pipeline is fitted with
SCADA system and 15 block valve stations along its
entire route.
Contract Type
PMC – Reimbursable MHRS
Scope of Services
Project Management Consultancy services, including review Basic/Detailed Engineering,
procurement and construction supervision

Crude Oil Supply from Yanbu Crude Oil Terminal (YCOT)

Client: Yanbu Aramco Sinopec Refining (YASREF)

Project Description
The project aims to supply YASREF crude oil tanks
with Arab Heavy crude oil from YCOT existing plant
through existing YCOT YR Pumps. The project starts at
the common discharge U/G header of YCOT tanks T-
1, 2 and 3 where a new interconnecting A/G pipeline
will be connected to reach the Existing YR pumps. The
YR pumps discharge will then be connected to a new
metering skid before connecting to the interface
point with SP2 inside YCOT fence.
Contract Type
EPC LSTK
Scope of Services
Basic & detailed engineering, procurement and construction

Engineering for the Petroleum & Process Industries - ENPPI

El Nubaria / El Sadat & El Sadat / El Fayoum Pipelines
2010 / 2012

Client: The Egyptian Natural Gas Company (GASCO)

Project Description
The project aims to install two gas transmission
pipelines and associated facilities:
 32” Nubaria / El Sadat city - 70 Km
 42” El Sadat / El Fayoum - 80 Km
Contract Type
Lump Sum for Professional Services, Material Supply &
Subcontracts - Cost Plus
Scope of Services
Engineering & Procurement services / Material Supply

Assiut / Aswan Gas Pipeline and

Dahshour Compression Station
2008 / 2012
Client: Egyptian Natural Gas Holding Company (EGAS)
Project Description
Installation of gas transmission pipelines
(500 KM) from Assiut to Aswan as follow:
- PHASE I: Assiut / Gerga P/L 120 km – 32”
- PHASE II: Gerga / Aswan P/L 380 km – 30”
- PHASE III: Compression Station in Dahshour
Contract Type
Lump Sum for professional services , Material Supply
Disbursable
Scope of Services: Route selection, surveying, basic and detailed engineering, procurement
Service, construction supervision and overall project management.

Engineering for the Petroleum & Process Industries - ENPPI

Neem Export Pipeline
2006 / 2008
Client: Greater Nile Petroleum Operating Company (GNPOC)
Project Description
The project aims to install a 16”- 100 km long crude oil export pipeline and transport the
dehydrated crude to Diffra field production facility (DFPF) – S.W. Sudan 760 Km from Khartoum.
Sizing / length
16 inch 100 KM
Contract Type
Lump Sum for professional services
Scope of Services
Basic & detailed engineering and procurement Services

Arab Gas Pipeline Phase I:

Inter Sinai Gas Pipeline Project
1999 / 2001

Client: Belayim Petroleum Company (Petrobel)

Project Description
The project aims to install 36”, 193 km - gas pipeline
from East Bank of Suez Canal to terminal area
eastward of el Arish city, in addition to communication
systems, leak detection systems & cathodic protection
systems.
Sizing / length
36”, 193 km
Contract Type
Lump Sum for professional services
Scope of Services
Basic engineering review, detailed engineering,
procurement services, prepare and issue construction
tender package and project management

Engineering for the Petroleum & Process Industries - ENPPI

Arish-Taba Gas Pipeline
2001 / 2003

Project Description
The project aims to install 36” P/L 250 KM from Arish to
Taba 10 BCM / Year to export the Egyptian sales gas across
the Gulf of Aqaba, in addition to executing new control
building at Taba. The scope included pipeline
communication systems, leak detection systems & cathodic
protection systems.
Sizing / length
36”, 250 km
Contract Type
Lump Sum for professional services, Material supply disbursable
Scope of Services
Arish / Taba Gas pipeline topographical survey, basic, detailed engineering & procurement
services

Aqaba Thermal Power Station

2002 / 2003

Client: East Gas Company (EGC)

Project Description
The Project aims to execute a receiving and metering
station for the gas transmitted from Taba in Egypt to
Aqaba - Jordan along with the associated facilities
Contract Type
Lump Sum for professional services
Scope of Services
Basic engineering and commissioning & start-up
assistance

Engineering for the Petroleum & Process Industries - ENPPI

Arab Gas Pipeline Phase II:
1st Stage: Aqaba to Rehab Power Station P/L
2004 / 2006

Client: Jordanian Egyptian FAJR for Natural Gas Transmission and Supply Co. Ltd. (FAJR)
Project Description
The project aims to transmit and compress Egyptian gas
from Aqaba to Rehab power station by installation of
Aqaba compression station, 36”, 394 km pipeline – 10
BCM/y gas, metering, and SCADA system. Sizing /
length: 36”, 394 km up to Rehab north power station
Contract Type
Lump Sum for professional Services & Construction,
Material supply disbursable
Scope of Services
EPC Turn-key consortium, techno-economic study,
feasibility study, review funding mechanism, set project financial scheme, conceptual design &
feed, basic & detailed engineering, procurement services, material supply, construction
supervision, commissioning & start up assistance, overall management and consortium leader

Arab Gas Pipeline Phase II:

2nd Stage: Rehab Power Station to Jordan/Syrian Boarders P/L
2006 / 2008
Client: Jordanian Egyptian FAJR for Natural Gas Transmission and Supply Co. Ltd. (FAJR)
Project Description
The project aims to transmit natural gas from Rehab power station to Jordanian / Syrian
boarders through a 36”, 30 km pipeline – 10 BCM/y gas, metering skids, and SCADA system
Sizing / length:
36”, 30 km from Rehab north power station to the
Jordanian and Syrian boarders.
Contract Type
Lump Sum for professional services & Construction,
Material supply disbursable
Scope of Services
EPC Turn-key consortium, techno-economic study,
feasibility study, review funding mechanism, set project
financial scheme, conceptual design & feed, basic &
detailed engineering, procurement services, material supply, construction supervision,
commissioning & start up assistance, overall management & consortium leader

Engineering for the Petroleum & Process Industries - ENPPI

Tanak / Omar Vapor Recovery
2001 / 2003
Client: Al Furat Petroleum Company
Project Description
Installation of 2 associated vapor recovery units with
a capacity of 2.7 MMSCFD & 3.5 MMSCFD at Tanak &
Omar areas; and installation of a new water injection
unit 900 cubic meter/hour at Tanak area in addition
to the related pipelines and utilities.
Sizing / length
 10” 36km (Tanak Omar Gas Pipeline) Carbon
Steel (API 5LX42)
 8” 11 Km (Maleh water pipeline) Carbon Steel
(API 5L X42)
 4” 4 Km (Omar CBF / Omar GSA gas condensate pipeline) Carbon Steel (API 5L X42)
Contract Type
Main Contractor LSTK
Scope of Services
Basic & detailed engineering, construction, procurement, commissioning & Startup

New Karama Pipeline

2007/ 2008
Client: Qarun Petroleum Company (QPC)
Project Description
Installation of a new 10” / 120 km pipeline from
Karama to Qarun and installation of 2 transfer pumps
at Karama area
Sizing / length
20,000 B/D (10" 120 Km crude) between Qarun &
Karama
Contract Type
Lump Sum for professional services
Scope of Services
Detailed engineering services

Engineering for the Petroleum & Process Industries - ENPPI

Management Services for 3 Natural Gas Pipelines
Client: Egyptian Natural Gas Holding Company (EGAS)
Project Description
Installation of three new natural gas pipelines:
- Taba / Sharm El Sheikh (20” 208km)
- Banisuef / Abu Qurkas (phase1) (32” 150km)
- Shukair / Hurghada (phase1) (24” 127km)
Sizing / length
20" 208 km/ 32" 150 km/ 24" 127 km
Contract Type
Reimbursable MHRs
Scope of Services
Management Services

Sharara Mellitah Pipeline Extension

2004 / 2005
Client: AGIP
Project Description
30" Crude Oil Pipeline from Sharara area to Melittah - 750 km, where the new pipeline will be
executed three sections including Metering skids, Scada System.
Sizing / length
30” 750 KM
Contract Type
Lump Sum for professional services
Scope of Services
Basic & detailed engineering services

Sapphire Condensate Export Pipeline

2004 / 2005

Client: Burullus Gas Company (Burullus)

Project Description
10” O.D condensate Pipeline from Idku pumping station to Damanhur and a new 12 O.D
pipeline from Damanhur to Tanta, in addition to 2 new tanks at Tanta terminal
Sizing / length
10" and 12" - total length is 100 KM
Contract Type
Main Contractor LSTK
Scope of Services
Basic & detailed engineering, procurement, construction & start-up assistance, Lump sum,
including material supply and construction works

Engineering for the Petroleum & Process Industries - ENPPI

Off-fence Pipeline & Facilities
1998 / 2001
Client: Middle East Oil Tankage and Pipelines (MIDTAP)
Project Description
The project aims to install crude pipeline (26"12 Km), gasoline pipeline (20"18 Km),
kerosene/diesel pipeline (21 Km), multi-purpose heavy products exchange pipeline (21 Km) and
effluent water pipeline. The scope also includes pipeline communication systems and leak
detection system.
Sizing / length
Crude P/L 26" 12Km, Gasoline P/L 20" (18 Km), Kerosene/diesel P/L (21 Km), Multi-purpose
heavy products exchange P/L (21 Km), effluent water P/L 16" 6.5 KM / carbon steel material
Contract Type
Lump Sum for professional services, Material Supply Disbursable
Scope of Services
Basic & detailed engineering, procurement services/material supply and assistance for
commissioning & start-up

Engineering for the Petroleum & Process Industries - ENPPI

 e. Offshore Capabilities
& Experience

Engineering for the Petroleum & Process Industries - ENPPI

DEKA (Denis – Kawaran) Subsea Field Development
2012 – 2014

Client: Belayim Petroleum Company (Petrobel)

Project Description
The project aims to develop Denis and Karawan
areas by drilling 5 new wells and collecting the
produced gas be PLEMs, and protecting the
pipelines using HIPPS, and controlling the wells
throw umbilicals, utilizing Subsea X-mas tree
technology

Contract Type
Lump-sum for professional services

Scope of Services
Technical Support and issuance of technical evaluation report for project equipment suppliers

SETH Offshore Development Project

2011 / 2012

Client: Belayim Petroleum Company (Petrobel)

Project Description
The project aims to install a new platform in water
depth of 83.3m at PTB Seth gas field in the Ras El
Barr Concession West Nile Delta area
(Mediterranean Sea), total field production flow rate
is 4.5 MMSCMD.
Contract Type
EPC LSTK – Consortium of ENPPI / Petrojet /
Tecnomare (Enppi Leader)
Scope of Services
Detailed engineering for topside facilities,
procurement services and material supply and
assistance for commissioning and startup

Engineering for the Petroleum & Process Industries - ENPPI

GUPCO Rehabilitation Project
2005 / 2015 (Long-Term Contract)

Client: Gulf of Suez Petroleum Company (GUPCO)

Project Description
The project aims to the Rehabilitation of BP offshore facilities including steel structural
platforms, topside facilities and subsea pipelines. The offshore facilities consist of 9 complexes
& 69 satellites (with an overall count of 119 platforms and 400 wells) and 1600 km of sub-sea
pipelines. The aim of the overall rehabilitation project was to make sure that the whole system
could safely operate for at least additional 25 years maintaining the best possible operating
conditions and capacities. A qualitative risk based approach had been followed for the whole
119 platforms in order to evaluate the hazard of structural failure.
Contract Type
Professional services and cost plus for material & subcontractors
Scope of Services
EPCM: basic & detailed engineering, procurement services and construction management

Al-Khafji Field Development Phase 1, Offshore Facilities

2006 / 2010
Client: Al-Khafji Joint Operations (KJO)
Project Description
The field development for Khafji has been developed to
maintain the maximum sustainable capacity of 300,000 Barrel
Oil per Day and production of 125 Million Standard Cubic Feet
Per Day of Associated gases, as well as, 50 Million Standard
Cubic Feet Per Day gas lift, by installation of 6 new platforms,
8500 tons total structure weight and modification of 9 existing
platforms, in addition to subsea pipelines with a total length
of 110 kilometer sizing 24 inches, 28 inches, 36 inches and 42
inches and laying of 59 kilometer subsea cables.
Contract Type: Consortium (Enppi – Petrojet - PMS - Rawabi) LSTK
Scope of Services: Engineering, material supply, supervision of onshore structure fabrication &
offshore laying/installation, overall management, consortium leader and commissioning &
start-up

Engineering for the Petroleum & Process Industries - ENPPI

Hilal Re-Development Project (FEED Stage)
2010 / 2011

Client: Gulf of Suez Petroleum Company (GUPCO)

Project Description
The project aims to replace the old Hilal platform
which was damaged due to a ship Collision by installing
a 4 legged, nine-slot normally unmanned production
platform at 80 m water depth.
Contract Type
Lump-sum for professional services
Scope of Services
Front End Engineering Design (FEED) including
engineering of the platform jacket, topsides and
tie-ins to subsea pipelines, long lead requests for
RFQs, project cost estimate and FEED technical
package.

Amer 8 Platform and related Onshore

& Offshore Facilities Development Project
2008 / 2013
Client: General Petroleum Company (GPC)
Project Description
The project aims to install a 4 legged, six-slot
production platform with 1100 tons lift weight at 24 m
water depth. The production capacity is 10,000 BPD.
The platform is designed to support two risers & two J-
tubes. The platform is equipped with Bell 412 helideck.
Contract Type
EPC – Consortium (ENPPI/Petrojet/PMS) – (Enppi
Leader)
Scope of Services
Basic & detailed engineering, procurement services,
construction, offshore installation works,
commissioning & start-up and overall management.

Engineering for the Petroleum & Process Industries - ENPPI

Re-Feed for Northwest October Field
2010 –2011
Client: PETROSALAM (J.V. with Arabian Oil Company Ltd. - AOC)
Project Description
The project aims to develop of a single nine-slot platform with ESP, 10” subsea pipeline 22 km
total length, and onshore receiving facilities at Gulf of Suez. Expected production rate 10,000
BOPD.
The offshore platform will be installed by using the Mobile Offshore Application Barge (MOAB)
system (design concept by Overdick GMBH – Germany)
Contract Type
Lump Sum for professional services
Scope of Services
Front End Engineering Design (FEED)

Global Re-Assessment of
Structures in MM & BH-PH
2009 / 2010
Client: Qatar Petroleum (QP)
Project Description
The re-assessment of the platforms structure consists of
the following:
16 platforms 22 connecting bridges
3 support jackets 3 satellite platforms
54 wellhead platforms 4 flare systems
Contract Type
Lump-sum for professional services
Scope of Services
Engineering Services

Engineering for the Petroleum & Process Industries - ENPPI

Northwest October Field Development (FEED Stage)
2008 / 2009
Client: Arabian Oil Company Ltd (AOC)
Project Description
The project aims to develop a single six-slot platform
at the Gulf of Suez with ESP, subsea 8” multiphase
pipeline, subsea 6” water injection pipeline and
onshore receiving facilities within SUCO Ras Badran
existing facility. The expected production rate is
6,000 BOPD. The onshore receiving facilities will
have a three-phase production separator, metering
equipments and onshore control room. The
separated fluids will be further treated onshore.
Contract Type
Lump-sum for professional services – reimbursable for number of specialized studies (e.g. RAM,
EIA, etc…
Scope of Services
Front End Engineering Design (FEED)

North Idku Development Project

2008 / 2010

Client: Suez Oil Company (SUCO)

Project Description
The project aims to install two new platforms and
topside facilities as well as the export pipeline and flow
line systems at North of Idku in addition to the
required modifications at WEPCO plant in Maadi.
Contract Type
Lump-sum for professional services
Scope of Services
Engineering services for the platform structure and
topside facilities including issuance of MRQ’s and
participation in technical evaluation.

Engineering for the Petroleum & Process Industries - ENPPI

TUNA Field Development
2008 / 2010
Client: Belayim Petroleum Company (Petrobel)
Project Description
PETROBEL intends to develop Tuna field at the Mediterranean
Sea by installing a new platform (4-legged platform approx. 82
m of water) and connecting pipelines (24’’ subsea pipeline
approx. 15 km from Tuna platform to new PLEM and
eventually to the existing Denise-A SSIV and 32” P/L to
onshore plant near T-NW2 existing platform) to support the
production of 4.5 MMSCFD.
Contract Type
EPC LSTK– Consortium of ENPPI, Technomare and Petrojet
(Enppi Leader)
Scope of Services
Detailed engineering, procurement services for subsea pipeline and material supply of topside
facilities

North Bardawil Development

2007 / 2008
Client: Belayim Petroleum Company (Petrobel)
Project Description
The project aims to upgrade the Barboni Platform (topside and structure) to accommodate the
new gas production of Assad and Zaraf fields, including a new sub-sea system, umbilical, control
and subsea pipeline tied from Assad & Zaraf fields to Barboni platform, 14”, 25 km.
Contract Type
Lump-sum professional services
Scope of Services
Basic engineering review, detailed engineering and project management

Denise Platform
2006 / 2008
Client: Belayim Petroleum Company (Petrobel)
Project Description
Upgrade of TNW2 existing platform to suit Denise gas field production, transmit additional
capacity to onshore through 32” 61 Km offshore pipelines and 32” 1 KM onshore and upgrade
of El Gamil onshore facilities.
Contract Type
Lump-sum for professional services
Scope of Services
Basic and detailed engineering and procurement services

Engineering for the Petroleum & Process Industries - ENPPI

Baltim-NW2 Platform
2003 / 2005

Client: Belayim Petroleum Company (Petrobel)

Project Description
The project aims to install a 12-slots RULE platform with a capacity of 10 MMSCMD Gas. Gas,
water, & condensate are transmitted onshore through 24”, 10” & 4” and subsea PLEM-2km
distance
Contract Type
Lump sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Rashid-2 Platform Project

2003 / 2004

Client: Rashid Petroleum Company (RASHPETCO)

Project Description
The project aims to install 4 legged unmanned steel
jacket platform located at Rosetta 49 m water deep with
a capacity of 265 MMSCFD and weighing 450 tons. The
gas is transmitted through a 24” subsea pipeline to the
onshore terminal for final processing, along with 3 (1X70
mm2) XLPE 12/20 KV 61 KM submarine cable with
optical fiber bundle.
Contract Type
Lump-sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Engineering for the Petroleum & Process Industries - ENPPI

Semman Field Development
2006 / 2008
Client: Belayim Petroleum Company (Petrobel)
Project Description
Installation of new Semman platform (tripod plus deck)
and laying of new 18” sea line from Semman to existing
Darfeel platform with total length 20 Km.
Contract Type
Professional services reimbursable
Scope of Services
Basic engineering review, detailed engineering and
procurement services

Al Hamd Platform
2004 / 2005
Client: General Petroleum Company (GPC)
Project Description
The project aims to install 1000 tons well head platform
at 37 m water depth with a capacity of 12,000 BPD crude
oil. The production is transmitted onshore through an 8"
pipeline and submarine power cable at Ras Bakr.
Contract Type
EPC main contractor: Lump sum for professional services,
construction, and offshore fabrication works disbursable
for material supply
Scope of Services
Basic & detailed engineering, procurement services, construction, offshore fabrication works,
commissioning, start-up, and overall management

Engineering for the Petroleum & Process Industries - ENPPI

Offshore North Sinai Field Development ONS
2005 / 2007 - NOSPCO
Client: North Sinai Petroleum Company (NOSPCO)
Project Description
Development of Tao offshore gas field, 60 km north
of Rommana producing 130 MMSCFD of gas. The
development includes offshore production wells,
production platform, submarine pipeline, onshore
gas treatment plant and sales gas pipeline, in
addition to gas dehydration.
Contract Type
Lump-sum for professional services and disbursable
for material supply
Scope of Services
Detailed engineering for offshore topside facilities and onshore gas central processing facility,
overall procurement services except pipelines and offshore structure steel, and construction
supervision

Temsah – 4 Platform
2005 / 2007

Client: Belayim Petroleum Company (Petrobel)

Project Description
The project aims to install 4 legs, 12-slot unmanned
fixed offshore production platform at 85 m water
depth with a capacity of 10 MMSCFD gas plus 3000
BBLD condensate.
Contract Type
Lump-sum for professional services
Scope of Services
Basic & detailed engineering and procurement
services

Engineering for the Petroleum & Process Industries - ENPPI

Barboni Platform
2003 / 2005
Client: Belayim Petroleum Company (Petrobel)
Project Description
The project aims to install a new platform at 91 m water
depth, capacity of 4.4 MMSCMD. Gas is transmitted to
Noras P.L.E.M. through 26” subsea pipeline.
Contract Type
Lump-sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Baltim-N Platform
2003 / 2005
Client: Belayim Petroleum Company (Petrobel)
Project Description
The project aims to install 4 legs 9-slots tubular steel frame jacket, and a fixed offshore
production platform with a Capacity of 4.7 MMSCMD Gas. Gas & condensate are directed to
Baltim east existing platform through an 18" Pipeline.
Contract Type
Lump sum for professional services
Scope of Services
Basic & detailed engineering and procurement services

Simian / Sienna Control Platform

2002 / 2004
Client: Burullus Gas Company (Burullus)
Project Description
Development of the Simian / Sienna field through deep water subsea facilities, tied back to the
existing Scarab / Saffron offshore pipeline system - control platform – upgrading / modification
onshore gas plant facilities.
Contract Type
Lump-sum (Subcontract services to Technip)
Scope of Services
Engineering for the platform structure and utilities, in addition to platform control system

Engineering for the Petroleum & Process Industries - ENPPI

West Delta Deep Marine Concession
Scarab / Saffron Development Project
2000 / 2003
Client: Burullus Gas Company (Burullus)
Project Description
Development of the deep marine Scarab / Saffron field
located 90 km offshore the West Delta Coast to
produce 600 MMSCFD of gas. The production is
transmitted through two P/L systems to onshore long
distance subsea tieback.
Contract Type
Reimbursable man-hours
Scope of Services
FEED Design & Detailed Engineering, Procurement,
Construction , Commissioning & Start-Up.

West Akhen Field Development

2001 / 2003
Client: Gulf of Suez Petroleum Company (GUPCO)
Project Description
The project aims to install a 6-slot 4-pile fixed offshore platform at 82m water depth in the
Mediterranean Sea with one full deck producing 80 MMSCFD gas plus 4500 B/D condensate
and installation of 3” glycol, 6” condensate, and 14” gas subsea pipelines connecting West
Akhen.
Contract Type
Lump-sum for professional services
Scope of Services
Detailed engineering, construction support engineering and installation analysis for the
offshore platform structure (Jacket – with launching configuration – deck, piles and
appurtenances) plus three subsea pipelines

Engineering for the Petroleum & Process Industries - ENPPI

Rosetta Field Development
1998 / 2000
Client: Rashid Petroleum Company (RASHPETCO)
Project Description
The project aims to install offshore production
platform with a capacity of 275 MMSCFD. Gas is
transmitted through a 24” gas subsea P/L 67 km to
onshore terminal.
Contract Type
Lump-sum for basic & detailed engineering,
reimbursable for construction supervision,
commissioning & start-up assistance
Scope of Services
Basic & detailed engineering, procurement services,
construction supervision, commissioning & start-up assistance

North July Offshore Field Development

1999 / 2000
Client: Gulf of Suez Petroleum Company (GUPCO)
Project Description
Offshore facilities to develop north July field comprising a Tripod-3 Slots Platform at 52m water
depth initially including Christmas trees, well head control panel, production & test manifold.
The NJ-10 & GUPCO offshore facilities shall be connected through an 8”, 9 km pipeline.
GUPCO offshore J-10 shall be modified to include the three-phase separator, gas & liquid
metering equipped with common prover to accommodate the production of Fanpetco NJ-1.
Contract Type
Reimbursable for professional services
Scope of Services
Basic and detailed engineering work for FANPETCO facilities; including offshore platform and
pipeline. In addition to engineering of tie-Ins to GUPCO facilities on J-10, and study to
investigate adequacy of the J-10 flare and blow down system to accommodate the new
FANPECTCO production.

Engineering for the Petroleum & Process Industries - ENPPI

A/Q Phase II Topside Facilities
1990 / 1992
Client: Western Desert Operating Petroleum Company (WEPCO)
Currently (Abu Qir Petroleum Company)

Project Description
The projects aims to install a new production platform
(six legged) at 35m water depth. The platform is
equipped with process and utility facilities for 150
MMSCFD and connected to the existing platform through
a 45m bridge.
Contract Type
Lump-sum turnkey
Scope of Services
EPC turnkey, detailed engineering of topsides, structural
modifications of existing platform, weight control,
procurement services, load out of fully equipped deck, commissioning & start-up

A/Q Offshore Gas Compression (Utility Modules)

1993 / 1995
Client: Western Desert Operating Petroleum Company (WEPCO)
Currently (Abu Qir Petroleum Company)

Project Description
The project aims to install two new gas
compression platforms A/Q P1-C and A/Q P2-
C. The platforms are connected through a
bridge to the existing P1 & P2 platforms at
20m water depth. The platforms support two
turbo compressor trains and associated
process & utility topside facilities.
Contract Type
Lump-sum
Scope of Services
Detailed engineering of topsides, structural modifications and procurement services for the
utility / process modules

Engineering for the Petroleum & Process Industries - ENPPI

North AMER Offshore Platform
1986 / 1987

Client: General Petroleum Company (GPC)

Project Description
Two offshore wellhead platforms at water depths
62m and 64m; topside includes work over rig,
suction pump, pig launcher manifold, X-MAS trees
and power generation package
Contract Type
Lump-sum for professional services
Scope of Services
Basic & detailed engineering of jackets, deck and
topsides, in addition to sea bed survey and soil
investigation

Repair of Belayim Offshore Installations

3 Phases Project
1989 / 1992
Client: Belayim Petroleum Company (Petrobel)
Project Description
1st Phase: Data bank generation and cathodic
protection retrofitting for 40 of Belayim offshore
installations, repair intervention of 13 installations,
including 3 platforms and 10 templates.
2nd Phase: Structural re-qualification and repair
intervention for 7 installations including 3
platforms, 1 cluster and 3 templates.
3rd Phase: Structural re-qualification and repair
intervention of 23 installations including 5 platforms, 4 clusters and 13 templates.
Contract Type
Reimbursable for phase 1 and Lump-sum for phase 2 & 3
Scope of Services
- Detailed engineering including structural analysis assessment, repair works, long term
inspection plan, maintenance and repair program, tender package preparation,
technical bid evaluation and construction supervision.
- Repair work interventions budgetary cost estimate.

Engineering for the Petroleum & Process Industries - ENPPI

Transgulf Gas Utilization Project (Phase I)
1991 / 1994
Client: Egyptian General Petroleum Corporation (EGPC)
Project Description
The project aims at transporting and processing 107
MMSCFD of associated gases at GUPCO Ras Bakr
processing unit. The gases are collected from Belayim
fields in Sinai and GUPCO offshore October field.
Contract Type
Lump-sum turnkey for services, reimbursable for
materials and construction
Scope of Services
Techno-economic study, basic and detailed
engineering for onshore facilities and 12” diameter sub-sea pipeline, procurement services,
construction supervision, overall management commissioning & start-up

SIDKY “B” Platform Topside Facilities

1992 / 1993
Client: Gulf of Suez Petroleum Company (GUPCO)
Project Description
Topside facilities to produce 10 000 b/d of crude oil
and 24 MMSCFD of associated gases
Contract Type
Lump-sum
Scope of Services
Detailed engineering for topsides including:
- Supply of material & equipment
- Commissioning & start-up assistance

Engineering for the Petroleum & Process Industries - ENPPI

Belayim Incremental Recovery
1991 / 1993
Client: Belayim Petroleum Company (Petrobel)
Project Description
Installation of 2 unmanned platforms mwp-3 &
mwp-4 at 34 & 37 m water depths
The project also included:
- 8” production subsea pipeline
- 6” test subsea pipeline
- Two water injection subsea pipeline (8”& 4”)
- Two submarine electrical cables from mwp-4 to
mwp-3
Contract Type
Lump-sum
Scope of Services
Basic & detailed engineering of topsides, including procurement assistance for mwp-3 & mwp-4
platforms

Ras Ghara Production Facilities (Phase I, II)

1990 / 1992
Client: Belayim Petroleum Company (Petrobel)
Project Description
Ras Ghara oil field development to produce 10 000
BSD, comprising:
- Offshore platform & topside facilities
- On/offshore launching / receiving traps
- Onshore production facilities, utilities & power
generation
- 104 km onshore transfer pipeline to Petreco area
- 6"/10" 3 km sub-sea pipeline - Tie-ins to the
existing storage facilities
Contract Type
Reimbursable
Scope of Services
 Techno Economic Study (Phase I)
 Project Management (Phase II)
 Inspection Services (Phase II)

Engineering for the Petroleum & Process Industries - ENPPI

Gemsa Crude Field Development
1990 / 1991

Client: Badr Petroleum Company (Bapetco)

Project Description
- Installation of prefabricated deck on the existing
piles
- 8”, 12 km subsea pipelines
Contract Type
Reimbursable
Scope of Services
Basic & detailed engineering of jacket, decks,
topsides, and subsea pipelines

A/Q Phase II Offshore Gas Production

1983 / 1985

Client: Western Desert Operating Petroleum Company (WEPCO)

Currently (Abu Qir Petroleum Company)

Project Description
The project aims to install a 6 legged production
platform (P2) at 20m water depth. The platform
production capacity is 125 MMSCFD and
transmitted through a 20 km subsea pipeline.
Contract Type
Reimbursable
Scope of Services
Project management including construction
management, supervision, and start-up services

Engineering for the Petroleum & Process Industries - ENPPI

Belayim Topside Facilities
1984 / 1985

Client: Belayim Petroleum Company (Petrobel)

Project Description
Topside facilities on four new installed
platforms & modifications of the topside of
four existing platforms to upgrade oil
production to 200 000 B/D and separate 60
MMSCFD of associated gas.
Contract Type
Reimbursable
Scope of Services
Project management including construction
management and supervision, engineering
review, commissioning, and start-up assistance

Engineering for the Petroleum & Process Industries - ENPPI

 f. Utilities Experience

Engineering for the Petroleum & Process Industries - ENPPI

Utilities Project for New Ethylene & Derivatives Complex in Alexandria
2011 / 2015
Client: The Egyptian Ethylene and Derivatives Company (ETHYDCO)
Project Description
The project aims to install a new utilities and
power generation plant required for the New
Ethylene & Derivatives Complex in Alexandria.
The New Utilities & Power Generation Plant
shall be built to serve the following plants :
 Ethylene Plant 460,000 Ton/Y
 Polyethylene Plant 300,000 Ton/Y
 Butadiene Plant 20,000 Ton/Y
 Polybutadiene plant 20,000 Ton/Y

Contract Type
Lump sum for professional services, disbursable for procurement and construction
Scope of Services
Engineering, Procurement, Construction, commissioning and startup and Overall Management

Engineering and Procurement Service for GTG and Complex Substation

2015 / 2018

Client: The Egyptian Ethylene and Derivatives Company (ETHYDCO)

Project Description
The project aims to install a new Permanent Power Plant (PPP) for its complex in Ameriya with
a capacity of 70 MW, generated through a simple gas turbines cycle, designed as per
manufacturer standard and convertible to a combined cycle scheme.
Phase I:
Covering the installation of 70 MW Power Plant based on Simple Cycle Gas Turbines and
convertible to combined Cycle Gas Turbines, together with associated ancillaries / utilities.
Phase II:
Covering the installation of a new 220/66 kV transformer substation and its connection with the
national 220 KV grid.
Phase III:
Covering the upgrade of the purchased simple cycle turbines, to work under the combined
cycle scheme and all its associated ancillaries/ utilities.

Contract Type
Lump sum for professional services and reimbursable for commissioning assistance
Scope of Services
Engineering, procurement and commissioning assistance
Engineering for the Petroleum & Process Industries - ENPPI
Complex Offsite OSBL Project
2013 / 2016

Client: The Egyptian Ethylene and Derivatives Company (ETHYDCO)

Project Description
The project aims to build the offsite facilities in one project for Ethylene & Derivatives complex.
Contract Type
professional services
Scope of Services
Detailed engineering,procurement services for the material supply up to job site, construction
supervision & management activities overall project management commissioning and start-up
supervision

Expansion of SUMED Storage Capacity (6 Tanks)

2011 / 2013

Client: Arab Petroleum Pipelines Co. (SUMED)

Project Description
In order to increase the storage capacity at Ain Sukhna
Terminal, SUMED intends to build six new floating roof
tanks, each of approximately 1.1 million barrel
(175,000 m3) of net working capacity, 110 m diameter
which shall be located adjacent to the existing tank
farm and connected to it.
Contract Type
EPC LSTK (ENPPI Main Contractor)
Scope of Services
Detailed engineering, material supply, construction, commissioning & start-up

Engineering for the Petroleum & Process Industries - ENPPI

Expansion of Hout Crude Onshore Production Facility
2006 / 2009

Client: Al-Khafji Joint Operations (KJO)

Project Description
Expand storage capacity at Hout onshore production
facility by installation of additional 4 storage tanks (500 to
80,000 m3 capacity floating and fixed roof), in addition to
booster pumps, instrumentation, piping, fire fighting and a
new electrical substation.
Contract Type
EPC LSTK Consortium with Petrojet – (Enppi Leader)
Scope of Services
Engineering, Material Supply, Construction, Project
Management, Commissioning and Start-Up Assistance.

Yanbu Export Refinery Project

Tank Farm Package – SP1
2010 / 2014

Client: Yanbu Aramco Sinopec Refining (YASREF)

Project Description
The Project aims to install a new refinery with capacity of 400,000 Barrel/Day. The Tank farm
package of Yanbu export refinery includes 33 storage tanks with different diameters (12.5 to
120 mt), sizing up to 1.2 Million Barrels and 13 spherical tanks 60,000 barrels each:

Contract Type
EPC LSTK (ENPPI Main Contractor)

Scope of Services
ENPPI: Engineering, material supply, construction (subcontracted to several Saudi and Egyptian
companies), commissioning & start-up and overall project management
Engineering for the Petroleum & Process Industries - ENPPI
Yanbu Site Completion Package (MC4)

Client: Yanbu Aramco Sinopec Refining (YASREF)

Project Description
The project aims to the execution of the Site
Completion package MC-4 for Yanbu Export Refinery
Project (YERP). The Project includes the plant roads
construction work up to the road marking and traffic
signage with a total surface area of roads equals
190,000 sq. meters, construction and concrete lining
for Storm water ditches and trenches. Also, the
package includes the plant security related items
including the inner and outer patrol roads with a total
length of 18 km, perimeter Fences and a K-12 Grad
Anti-Ram crash barrier. Also, a Coastal road of an
approximate length of 4 km.
Contract Type
Engineering Services L/S, Material Supply Cost Plus, Construction Works Unit Rate
Scope of Services
EPC Main Contractor for basic & detailed engineering, construction and pre-commissioning

Methyl Tertiary Butyl Ether System (MTBE)

Storage Tanks
2014 / 2016
Client: Yanbu Aramco Sinopec Refining (YASREF)

Project Description
The project aims to build two new tanks for the
storage of MTBE “Methyl Tertiary Butyl Ether”
product complete with all the relevant utilities and
tie- in with existing facilities.
Contract Type
EPC LSTK
Scope of Services
EPC Main Contractor for basic & detailed
Engineering, construction and pre commissioning.

Engineering for the Petroleum & Process Industries - ENPPI

Ethylene and Polyethylene plants

Utilities and Offsite Complex Project

1997 / 2000

Client: Sidi Kerir Petrochemicals Company (SIDPEC)

Project Description
The utilities and offsite plant provides SIDPEC’s two
new plants (Ethylene and Polyethylene) with fire
fighting & cooling water, compressed air and de-
mineralized water. Moreover, the complex provides
process water treatment.

Contract Type
EPC - Lump-sum Turnkey
Scope of Services
Engineering, material supply, construction, commissioning & start-up, overall project

Damietta Export Facilities

2001 / 2004

Client: United Gas Derivatives Company (UGDC)

Project Description
Installation of Marine export facilities – cryogenic
tank capacity (30,000m3) for propane storage
produced from Port Said NGL process facilities
Contract Type
EPC turnkey – consortium (ENPPI / Tractebel) –
lump-sum for professional services, cost plus fees
for material supply and construction work
Scope of Services
FEED & detailed engineering, procurement,
construction, commissioning & start-up assistance

Engineering for the Petroleum & Process Industries - ENPPI

Sky Medical Center
2009/2013

Client: Housing & Social Services Fund For The Petroleum Sector’s Employees
Project Description
The project aims to construct a hospital according to the highest international specifications to
serve the petroleum sector employees.
Contract Type
Cost Plus
Scope of Services
Design review, procurement services, construction supervision, overall management,
commissioning and final hand-over

Petrosport – Katameya Sporting Club

Client: Petrosport
Project Description
The project is comprised of soccer fields, social
building, a mosque, a stadium, a squash field, a
swimming pool, communal gardens and parking
areas.
Scope of Services
Design Development & Construction Supervision

Engineering for the Petroleum & Process Industries - ENPPI