Khaled Rajeh

Nationality: Tunisian Permanent Address

Cell: (+216) 97150093 Tunisia Messaid - Kebili Khaled RAJEH
: (+218) 913079573 Libya CP 4200
E-mail: [email protected] TUNISIA
PROCESS ENGINEER
30 Years Old, Married with one child

OBJECTIVE Process & Petroleum Engineering

PROFESSIONAL EXPERIENCE (+6 Years)

From 8th November CHIMEC S.p.A – ITALY

2010 up to date

OIL & GAS FIELDS – Technical & sales engineer (Field Executive)
LYBIA- ONSHORE  Detect process problem, select suitable chemicals.
 Quality control of crude oil, produced water & gas.
 Oil analysis: BS&W, Salt, API measurement.
 Demulsifier injection & Emulsion & BS&W control.
 Produced water analysis.
 Resolve the problem of corrosion, scale, foam, bacteria, wax and paraffin.

ENI-CONGO Technical & sales engineer (Field Executive)

OFFSHORE  Detect process problem, select suitable chemicals.
 Quality control of crude oil, produced water & gas.
 Oil analysis: BS&W, Salt, API measurement.
 Demulsifier injection & Emulsion & BS&W control.
 Produced water analysis.
 Make solution for corrosion, scale, foam, bacteria wax and paraffin problems.

From June 2008 Up to 7th Engineering Procurement & Project Management (EPPM) –
November 2010 TUNISIA (EPC Contractor)

 GNPOC – SUDAN As Petroleum & Process Engineer in the “Produced water treatment & injection”
GNPOC (Greater Nile Petroleum Operating Company Sudan): Design of water
treatment unit, high pressure pump station and water injection wells:
 Well model construction & software simulation using Prosper.
 Surface network model & pipeline design using HYSYS software.
 Design of the injection pumps.

Khaled RAJEH CV, Process Engineer

Khaled Rajeh
Nationality: Tunisian Permanent Address
Cell: (+216) 97150093 Tunisia Messaid - Kebili Khaled RAJEH
: (+218) 913079573 Libya CP 4200
E-mail: [email protected] TUNISIA
PROCESS ENGINEER
30 Years Old, Married with one child

 GNPOC – SUDAN As Petroleum & Process Engineer in the “Gas Lift Study Project” GNPOC: Gas lift design
for the wells of Neem & Diffra fields in Sudan.
 Well model construction & gas lift design using PIPESIM software.
 Surface network model & pipeline design using PIPESIM software.
 Design of the compressor for the gas lift.
 Dehydration unit for flared gas used in the gas lift .
 SONATRACH As Project coordinator & Process Engineer in the “Etude, fourniture et réalisation de
ALGERIA
pompérie des chaines de filtration et pipe d’expédition de CIS à OMN77 HASSI-
MESSAOUD Algérie” SONATRACH: Consist in the study, supply & construction of two
filtration units to de-sand produced water (Dessander) & to remove hydrocarbons (filter
coalescer) from it before expedite along of around 20 km of a SVR pipeline for water
injection in the wells.

 ENI TUNISIA B.V. As Process Engineer in the FEED & Detail Engineering for “Maamoura & Barraka field
Development Project”: (Oil, Gas & LPG plant) Liquid separation, gas sweetening, gas
compression, gas dehydration, LPG recovery, dew point control and loading stations.

 SONATRACH As Process Engineer in the “Rénovation, maintenance, suivi de l’exploitation et de contrôle

ALGERIA
qualité des eaux traitées des stations de déshuilage de la région de Hassi-Messaoud” :
Study, maintenance, exploitation & quality control of two produced water treatment
stations (Three phase separators, chemical injection units, Induced gas flotation
separators, dissolved gas flotation separators).

 SONATRACH As Process Engineer in the “Etude, Fourniture et Montage de deux Unités de Traitement
ALGERIA
des Eaux De Rejets Industriels à Oued Noumer” : Study, supply & construction of two
water treatment units.

Engineering

PFD’s, P&ID’s production, equipments design & instruments data sheets, equipments specifications, all type
of process study reports, design of PSV’s, PVSV, lines sizing & technical evaluations, Flare design, simulation
report, Hazop study, design basis, operating philosophy, commissioning, pre-commissioning, start up &
operating manuals…
Coordination

Interface contractor/client

Khaled RAJEH CV, Process Engineer

Khaled Rajeh
Nationality: Tunisian Permanent Address
Cell: (+216) 97150093 Tunisia Messaid - Kebili Khaled RAJEH
: (+218) 913079573 Libya CP 4200
E-mail: [email protected] TUNISIA
PROCESS ENGINEER
30 Years Old, Married with one child

Khaled RAJEH CV, Process Engineer

Khaled Rajeh
Nationality: Tunisian Permanent Address
Cell: (+216) 97150093 Tunisia Messaid - Kebili Khaled RAJEH
: (+218) 913079573 Libya CP 4200
E-mail: [email protected] TUNISIA
PROCESS ENGINEER
30 Years Old, Married with one child

TRAININGS

2011 International Safety Training Center (apt) Milano-

Italy
 BOSIET: “Basic Offshore Safety Induction & Emergency Training”
Including HUET & EBS (5700)
 “Basic H2S Training (9014)”

2011 Capita Consulting Roma

“Certificate of Sales Seminar for Sales Engineers”

2011 Chimec S.p.A

 “Anti-scale treatments”
 “Anti-corrosion treatments”
 “Biocide treatments”
 “Bio-dispersant treatments”
 “Water system treatments”, cooling tower, boiler…

2010 Mediterranean School of Business Tunisia

 “A Communication Skills Course for Business English”

2009 Engineering Procurement & Project Management (EPPM) Tunisia

 Oil & Gas Processing for Design Engineers
 Instrumentation in Oil & Gas Fields

2009 Engineering Procurement & Project Management (EPPM) Tunisia

 Reciprocating Compressors, Screw Compressors
 Centrifugal Pumps
 Shell & Tube Heat Exchangers

2009 Engineering Procurement & Project Management (EPPM) – Tunisia

TUNISIA
 Distillation: Theory Review
 Distillation Columns: Hydraulics, Internals, Sizing
 Crude Oil Refining

2009 Engineering Procurement & Project Management (EPPM) Tunisia

 Natural Gas Dehydration: Liquid & Solid Desiccant Processes
 Natural Gas Sweetening:
 Elevated and Ground Flares: Types, Selection, Troubleshooting and Thermal Design

Khaled RAJEH CV, Process Engineer

Khaled Rajeh
Nationality: Tunisian Permanent Address
Cell: (+216) 97150093 Tunisia Messaid - Kebili Khaled RAJEH
: (+218) 913079573 Libya CP 4200
E-mail: [email protected] TUNISIA
PROCESS ENGINEER
30 Years Old, Married with one child

TRAININGS DURING HIGH SCHOOL PERIOD

2007 Gabes Cement Company “société de ciment de Gabès” Tunisia

 “Heat & material balances of cement production”

2006 Amer’s Plastics Company “société Amer plastics” Tunisia

 “Comparison between injection & extrusion plastic production technologies”

SOFTWARES
 Aspen HYSYS: Process Steady State Simulation
 Aspen HTFS+ and HTRI Suite: Heat Exchangers Steady State Simulation
 Aspen Flare Net: Flare Network Simulation
 PIPESIM: Pipeline Steady State Simulation & Lifting Design
 Petroleum expert : Prosper: Lifting Design
 Snap: Gas Lift Design
 Good Knowledge of AUTOCAD
 IBM Lotus Notes 7
 Microsoft Office : Word, Excel, PowerPoint, Outlook
 Programming Languages : C++ & Pascal
 Other small software for PSV, PVSV & Valve design…

STANDARDS
 API: 520, 521, 537, 526, 610, 2000…
 SHELL DEP: Separators design
 NFPA
 GPSA

LANGUAGES
 English Fluent (Read, Written, Spoken)
 French Fluent (Read, Written, Spoken)
 Arabic Fluent (Read, Written, Spoken)

HIGH SCHOOL (Bac +5)

2005-2008 National Engineering School of GABES (ENIG) Tunisia
 Chemical Process Engineer (3 years)

2003-2005 Preliminary Engineering Studies Institute(ISSATG) Tunisia

 Class physics-chemistry (2 years)

Khaled RAJEH CV, Process Engineer

TECHNICAL SKILLS