Scribd
Upload
55 views

SP3D Equipment Practice Lab: Manipulating Equipment: Modifying The Properties of Equipment/Nozzles

sp3d guideline for piping for piping

Uploaded by

Dhaval Dave
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

SP3D Equipment Practice Lab: Manipulating Equipment: Modifying The Properties of Equipment/Nozzles

sp3d guideline for piping for piping

Uploaded by

Dhaval Dave
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SP3D Equipment Practice Lab: Manipulating Equipment

SP3D Equipment Practice Lab: Manipulating


Equipment
Modifying the Properties of Equipment/Nozzles:
Modify the properties of the nozzle STNoz1 and 41P-101A within the existing equipment 40V-
101 in Unit U04 by using the following specifications:

Nozzle STNoz1
• Nominal Size: 6 in
• Name: A

Nozzle 41P-101A
• Nominal Size: 8 in
• Name: N1

Steps:
1. Define your workspace to show Unit U04 and coordinate system U04 CS.

2. In your Workspace Explorer, expand equipment 40V-101.

3. Under the Equipment node 40V-101, select nozzle STNoz1.

4. Open the property page for nozzle STNoz1.

5. Change the following specifications and click Apply (this leaves the property page
displayed so you can quickly edit the next nozzle).

• Nominal Size: 6 in
• Name: A
6. Now select the Suction Nozzle under equipment 41P-101A. This will open the property
page of the Suction Nozzle.

7. Change the following specifications and click OK.

• Nominal Size: 8 in
• Name: N1

Moving the Equipment/Nozzles:


Move the existing equipment 40V-101. The original position of the object is as follows:

• East: 98 ft
• North: 99 ft 8 in
• Elevation: 8 ft 3 in

The new position of the object should be as follows:

• East: 85 ft 1.85 in
• North: 117 ft 0.84 in
• Elevation: 2 ft 4.76 in

© Copyright 2009 Intergraph Corporation

Last Updated: April 7, 2009 for SmartPlant® 3D 2009 Page 1 of 4


SP3D Equipment Practice Lab: Manipulating Equipment

The repositioned equipment should look like the position of the pump in Figure 1.

Figure 1: Final Output - Repositioned Equipment in the Model

Steps:
1. Define your workspace to include Unit U04 and coordinate system U04 CS.

2. Set the active coordinate system to Global.

3. Click the Set Target to Origin option on the PinPoint ribbon to move the target position
for placing the equipment to the origin of the active coordinate system.

4. Select equipment 40V-101 in the Workspace Explorer.

5. Click the Move button on the Common toolbar.

6. Enter the new origin location on the PinPoint ribbon:

• East: 85 ft 1.85 in
• North: 117 ft 0.84 in
• Elevation: 2 ft 4.76 in

7. Click in the graphic view to place the equipment at the new location.

8. Click the Undo button on the Common toolbar to undo the move operation.

Perform the undo operation so that equipment 40V-101 is at the correct location for the
Piping practice labs.

Copying/Pasting the Equipment/Nozzles:


Copy and paste the existing pump 41P-101A. The original position of the object is as follows:

• East: 98 ft
• North: 99 ft 8 in
• Elevation: 8 ft 3in

The new position and name of the object should be as follows:

© Copyright 2009 Intergraph Corporation

Last Updated: April 7, 2009 for SmartPlant® 3D 2009 Page 2 of 4


SP3D Equipment Practice Lab: Manipulating Equipment

• East: 30 ft
• North: 11 ft
• Elevation: 2 ft
• Name: 41P-101B

The repositioned pump should resemble the highlighted section in Figure 2.

Figure 2: Final Output – Copying and Pasting the Existing Pump

Steps:
1. Set the active coordinate system to U04 CS.

2. Click the Set Target to Origin option to move the target position for placing the
equipment to the origin of the active coordinate system.

3. Select the pump 41P-101A graphically or by keying in the name in the Workspace
Explorer name search field.

4. Click the Copy button on the Common toolbar.

5. When prompted for a reference point, select the left corner of the foundation of the
pump.

6. Click the Paste button on the Common toolbar.

7. The U04 > Equipment folder is already selected as the new system folder in the
Workspace Explorer.

8. Clear the Paste in place check box in the Paste dialog box and click OK.

9. Key in the following specifications on the PinPoint ribbon and click in the graphic view
to enter the To point for the paste operation:

• East: 30 ft
• North: 11 ft
• Elevation: 2 ft

© Copyright 2009 Intergraph Corporation

Last Updated: April 7, 2009 for SmartPlant® 3D 2009 Page 3 of 4


SP3D Equipment Practice Lab: Manipulating Equipment

10. Change the name to 41P-101B by editing the name field on the Equipment Edit ribbon.

© Copyright 2009 Intergraph Corporation

Last Updated: April 7, 2009 for SmartPlant® 3D 2009 Page 4 of 4

You might also like