Scribd
Upload
23 views3 pages

Tugas Pak Faiz

The document provides instructions for configuring 3 routers in Packet Tracer by: 1. Configuring the interfaces on each router with IP addresses for different subnets. 2. Configuring routing on each router to route between the different subnets. 3. Configuring IP addresses on PCs connected to each router subnet and verifying connectivity by ping.

Uploaded by

nadila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views3 pages

Tugas Pak Faiz

The document provides instructions for configuring 3 routers in Packet Tracer by: 1. Configuring the interfaces on each router with IP addresses for different subnets. 2. Configuring routing on each router to route between the different subnets. 3. Configuring IP addresses on PCs connected to each router subnet and verifying connectivity by ping.

Uploaded by

nadila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Cara konfigurasi 3 router

Hasil akhir gambar konfigurasi 3 router :

Cara Konfigurasi Routing pada Packet Tracer

Setting router
1. ROUTER 0

Router>enable
Router#configure terminal
Router(config)#interface fa 0/0
Router(config-if)#ip address126.10.10.20 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#interface fa 0/0/0
Router(config-if)#ip address 192.168.0.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
Router(config-if)#exit
1. ROUTER 1
2.
Router>enable
Router#configure terminal
Router(config)#interface fa0/0
Router(config-if)#ip address 128.15.10.20 255.255.0.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#interface fa 0/0/0
Router(config-if)#ip add 192.168.0.2 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#interface fa 0/0/1
Router(config-if)#ip address172.10.10.10 255.255.0.0
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
Router(config-if)#exit

ROUTER 2

Router>enable
Router#configure terminal
Router(config)#interface fa0/0
Router(config-if)#ip address192.168.1.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#interface fa 0/0/0
Router(config-if)#ip address 192.168.0.3 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shutdown
Router(config-if)#exit

Setela itu kita atur routingnya


Cara setting routing :

Router0:
Router(config)#ip route 128.15.0.0 255.255.0.0 192.168.0.2
Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.0.2

Router1 :
Router(config)#ip route 126.0.0.0 255.0.0.0 192.168.0.1
Router(config)#ip route 192.168.0.2255.255.255.0 192.168.0.3

Router2 :
Router(config)#ip route 126.0.0.0 255.0.0.0 192.168.5.1
Router(config)#ip route 192.168.2.0 255.255.255.0 172.10.10.10
Memberi IP pada masing-masing PC

1. Klik image PC
2. Klik Tab Desktop
3. Pilih IP Configuration
4. Ulangi hingga PC5

Daftar IP Address dan Default Gateway :

PC0
ip address : 162.10.10.10
gatway : 162.10.10.20

PC1
ip address : 168.15.10.10
gatway : 168.15.10.20

PC2
ip address : 192.168.1.1
gatway : 192.168.1.2

Setelah itu kita ping apa bila berhasil akan muncul seperti ini

You might also like