Scribd
Upload
49 views

Transportation Engineering Ii: Group Index Method

This document describes the group index method for classifying soils used in pavement construction. [1] Representative soil samples are tested to determine their group index, which involves sieve analysis, liquid limit testing, and plastic limit testing. [2] The group index is used to classify soils from excellent to very poor, and informs the required pavement thickness based on soil type and traffic volume. [3] An empirical equation is used to calculate the group index from test results.

Uploaded by

Muhammad Junaid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Transportation Engineering Ii: Group Index Method

This document describes the group index method for classifying soils used in pavement construction. [1] Representative soil samples are tested to determine their group index, which involves sieve analysis, liquid limit testing, and plastic limit testing. [2] The group index is used to classify soils from excellent to very poor, and informs the required pavement thickness based on soil type and traffic volume. [3] An empirical equation is used to calculate the group index from test results.

Uploaded by

Muhammad Junaid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

TRANSPORTATION

ENGINEERING II

GROUP INDEX METHOD

Group Index Method

• Representative
p soil samples
p are
taken, which are to be used in the
construction of pavement and then
its GI is find out.
– The following tests are required for
finding GI
• Sieve Analysis
• Liquid Limit Test
• Plastic Limit Test

1
• Sieve no.200 is important for this
method. The material passing
p g
through #200 sieve is called “silt
clay”. The material retained on
sieve #200 is known as “sand”.
• After finding out the liquid limit and
plastic limit
limit, we can easily find out
Plasticity Index as
PI = LL – PL

Plastic Index Type of soil


0 to 4 Silt
4 to 7 Undefined Soil
Greater than 7 Clayey Soil
• The soil closer to clay have a
g
higher value of G.I. and that to
sand have relatively lower value of
G.I. Lower group index leads to
good soils for pavement & vise
versa.

2
• On the basis of G.I. method the soils
(sub-grades) are divided in five
groups.
G.I. Type of Soil
0 Excellent Soil
0→1 Good Soil
2→4 Fair Soil
5→9 Poor Soil
10→20 Very Poor Soil

Type of Traffic
• In G.I. method for designing of pavement,
the thickness of pavement depends upon
the G.I. and the type of traffic.
• The following are different types of traffic;

Type of Traffic Commercial Vehicles


per day
d
Light traffic volume <50
Medium traffic volume 50 to 300
Heavy traffic volume >300

3
• The Group Index is calculated using
p
an empirical equation.
q
• Then using the charts, the curves
between GI and thickness of
pavements are plotted for various
types of traffic, from which one can
determine
dete e the
t e thickness
t c ess o of tthe
e
pavement.

• To find out Group Index an empirical


equation is used.
G.I. = 0.2a + 0.005 ac + 0.01bd
– a=that portion of %age of sub-grade soil passing
#200 sieve greater than 35% and not exceeding
75% expressed as a positive whole number (0→40)
– b=that portion of %age passing no 200 sieve greater
than 15% and not exceeding than 55% expressed as
a positive whole no (0→40)
– c=that portion of liquid limit greater than 40 and not
exceeding 60 expressed as a positive whole no
(0→20)
– d=That portion of numerical P.I. greater than 10 and
not exceeding 30 expressed as positive whole no
(0→20)

4
5
ASSUMPTIONS
• The curves presented are expected to
provide adequate pavement thickness for
most climatic conditions.
• The thickness recommended by this
method of design are based on the
assumption that the top six inches of the
sub-grade is compacted to at least 95
percent of standard Proctor dry unit weight
and
d th
thatt th
the sub-base
bb andd road
dbbase
materials are compacted to not less than
100 percent of the standard Proctor
values.
• Water table is maintained at least 3 to 4 ft
below the carriage way.

You might also like