ONE POINT SOURCE FOR CLAMPING ELEMENTS,

DEVICES AND FIXTURE ACCESSORIES

 SIDE ACTING CLAMPS
RIGID CLAMP

MODULAR FIXTURING SYSTEM FEATURES

Ü For machining of large objects with side
While considering the relative merits of dedicated fixtures clamping.
Ü Precise Dovetail assures positive compound
and modular fixtures, it is assumed that small-lot forward & downward force.
production is being done with interest in reducing (1) set Ü Side clamping keeps full surface free for
up time (2) tooling expenses (3) tooling lead-time. complete machining operation in one
setting.
Whether dedicated tooling or the all-modular approach is Ü High clamping force sustains heavy cutting
used, a proven way to reduce machine set-up time is to forces.

H
use an accurate grid pattern for locating fixtures, vices Ü Mechanical height limit is useful for
attaining constant clamping pressure.
and other accessories. g
Ü Can be supplied with T bolts & Allen key if
ordered.

a
ADVANTAGES OF DEDICATED TOOLING APPLICATIONS
Ü Suitable to use on milling, planning,
shaping, lathes, etc.
The all modular approach generally makes some Ü Very useful in fixture building for fast clamping & unclamping.
sacrifices in terms of (1) rigidity and strength (2) ease and Ü It is useful for job heights more than 60 mm.
speed in loading the workpiece or (3) overall MATERIAL
Ü Main body made of S . G . I ron
compactness of the fixtures. Ü Clamping J aw made of H arden S tel.
Modular accessories are designed for maximum FINISH
versatility in a wide range of applications. At times, a Ü Powder coated and blackodize
clamp or locator made from all modular components may H Appro. Force Allen. T-Slot Weight
Model a L B g s
consist of more than one component coupled together No. Min. Max. kN key gms
with some overall loss in rigidity versus a one piece UGRC-18 18 135 60 55 70 75 28 20 10 8 12 to 18 1500
UGRC-26 26 190 80 100 115 120 30 30 15 12 20 to 26 3850
custom detail used in a dedicated fixture. Rigidity in an all- UGRC-36 32 255 100 135 170 135 80 50 25 16 28 & above 14250
modular set up often comes at the expense of overall
compactness. As a result a larger working envelope may
be required to accommodate modular fixture. HINGE CLAMP
FEATURES
ADVANTAGES OF THE ALL MODULAR APPROACH Ü For machining of large objects where entire
surface is to be machined.
Modular accessories are designed for maximum Ü Can be used for clamping jobs having uneven
& unmachined side faces.
versatility in a wide range of applications. At times, a Ü To fix the job rigidly, long base plate with two
clamp or locator made from all modular components may T-Nuts is used.
consist of more than one component coupled together Ü This avoids reduction of clamping
pressure due to slippage.
with some loss in rigidity versus a one piece custom detail Ü Radial serrated Jaw assures firm
used in modular fixtures. clamping.
APPLICATIONS
Ü Suitable to use on milling, shaping,
ECONOMIC EVALUATION drilling machines & surface grinders etc.
Ü Could be used in the construction of
fixtures.
Since the accessories can be used again the effective cost Ü It is useful to clamp the job having height
gets considerably reduced when using modular fixtures. more than 60 mm.
After use for production, the fixture can be dismantled Ü Side faces need not be machined.
MATERIAL
and stored for future use. For manufacturing of dedicated Ü Main body made of S. G. Iron, clamping Jaw & Base plate made of
fixture, a lot of skilled machining will be involved, Hardened Steel.
whereas in assembling of modular fixtures, time to FINISH
Ü Blackodized & Powder coated
assemble a fixture when components are available is very
much less. Model No.
T-Slot
L L1 B H Hight of Job
Force Max. kN Weight
gms
In Europe and U.S.A. modular fixturing systems are
used by most of the industries. UGHC 14 to 24 14 to 24 100 135 60 65 More than 60 mm 15 7.5 2000

ROLE OF UNISON CLAMPING DEVICES

PLATE CLAMP
We are manufacturing most of the products, which can be FEATURES
used in both dedicated fixturing as well as modular Ü Low height & side clamping, leaving the
fixturing. We are continuously adding many products in entire top surface free for machining.
our manufacturing range. Ü Effective & positive clamping of flat jobs
like plates, flats irrespective of the size.
Many of our products are made as per IS/DIN standards. Ü Spherical washer is used in plate clamp
We are testing all incoming raw materials and there is to avoid it from swivelling.
inspection at each stage. Ü Springs are provided for quick release of clamping force & jaws.
Ü Due to low height it is suitable for clamping work piece with small

2
 contact area e. g. Plates, flats.
Useful for clamping the job
Ü APPLICATIONS
whose height is five mm more Ü Suitable to use on milling, drilling machines
for positive holding of thin Plates.
than the thickness of Plate
clamp. MATERIAL
Ü Main body made of brass, clamping jaw
Ü Develops a high tightening made of hardened steel.
force.
FINISH
APPLICATIONS Ü Blackodized.
Ü Suitable to use on milling,
shaping, planning machine etc. Model T-Slot
L B H Allen. Approx Force kN Weight
MATERIAL No. key gms
Ü Made of Hardened steel UGPC-12 12 40 20 25 5 6 3.00 100
FINISH UGPC-14 14 43 23 28 5 7 3.50 125
Ü Blackodized. UGPC-16 16 47 23 28 6 8 4.00 175
T-Slot UGPC-18 18 50 29 35 6 10 5.00 225
Model Allen. Approx Force kN Weight
L B H
No. key gms
UGPC-8 8 85 25 12 5 10 5 250
UGPC-10 10 85 25 12 6 10 5 280
ECCENTRIC SIDE CLAMP
UGPC-12 12 115 30 15 8 15 7.50 500
UGPC-14 14 115 30 15 10 15 7.50 500 FEATURES
UGPC-16 16 135 40 20 10 20 10 1000 Ü Rapid clamping & unclamping of work
UGPC-18 18 135 40 20 12 20 10 1000 piece by operating a cam handle
UGPC-20 20 200 50 25 12 30 15 2250 Ü Smooth spiral cam locks positively. In
UGPC-22 22 200 50 25 16 30 15 2250 view of side clamping & low profile of the
clamp, it is possible to do machining
operation in one setting over the whole
COMPOUND SLIDE CLAMP area of the workpiece without moving the
clamp.
FEATURES Ü Downward & forward action of the jaw
Ü These are also low height side clamps ensures the positive clamping of the
which leave the entire surface free for workpiece.
machining. APPLICATIONS
Ü Effective & rigid clamping of flat job is Ü It can be used in the construction of
done irrespective of the size of the job. fixtures as standard, fast
Ü Applies wedge type action thereby exerting clamping & unclamping element to
equal side downward pressure simplify the clamping system.
with maximum clamping force. Ü Used on drilling, milling, cutting
Ü Quick clamping & unclamping. machines for light operations.
Ü Can be used for clamping jobs of H +1 MATERIAL
mm Ü Made of Hardened Steel.
Ü This clamp is more useful than plate clamp FINISH
due to full serration of the jaws to Ü Blackodized.
clamp thin material.
Ü No need of machined side faces.
APPLICATIONS T-Slot Approx max. kN Weight
Model No. Jow movement mm L B H
Ü It is suitable to use on milling, planing gms
machines & where high clamping
force is required. UGESC 62 4 62 48 38 12 to 18 7 900
MATERIAL
Ü Made of Hardened Steel.
FINISH
Ü Blackodized.
TOP ACTING CLAMPS
Model T-Slot Allen. Approx Force kN Weight
DOWN THRUST CLAMP
L B H
No. key gms
UGPC-8 8 75 25 12 5 10 5 250 FEATURES
UGPC-10 10 75 25 12 6 10 5 280 Ü Rapid clamping & unclamping by hand and with
UGPC-12 12 110 30 15 8 15 7.50 500 positive down thrust by
UGPC-14 14 110 30 15 10 15 7.50 500 means of threaded spindle and with eccentric
UGPC-16 16 115 40 20 10 20 10 1000 lever.
UGPC-18 18 115 40 20 12 20 10 1000 Ü Easy and quick clamping of work piece by
UGPC-20 20 160 50 25 12 30 15 1750 swivelling away the clamping pad.
UGPC-22 22 160 50 25 16 30 15 1750 Ü Occupies very little space due to its
compact construction.
Ü Clamping height can be steplessly
THIN PLATE CLAMP adjusted.
Ü To increase the clamping height,
separate support cylinder
FEATURES
UGDTC/HC- 35 or
Ü The entire body goes in T slot & only clamping
UGDTC/HC- 70 are available.
jaw remains above the bed level.
Ü Spring is provided for quick
Ü Useful to hold the thin plates from 5 to 9 mm
release of clamping pad.
thickness & clamp positively due to its very low
Ü All matching cylindrical parts
height.
precisely ground.
Ü Main body is made of brass to save the
Ü Useful for mass production where
machine bed from rusting & damage. Clamping jaw is made of heat
clamping/declamping is to be done within a fraction of second.
treated steel for strength & durability.
Ü Eccentric lever gives clamping stroke of 1.5 mm to clamping pad
Ü suitable for jobs which require low to medium clamping force.
which results in downward thrust of 10 kN.

3
 FINISH
Ü Yellow passivated & power coated.

Model No. T-Slot

B 1 Clamping B L T-Bolt Hex Nut Plain Washer WIAssembly
height H Washer
APPLICATIONS UGSUC-12 12 17 0-50 50 138 UFTB12125 UFHN1218 UEPW 12 1500
Ü Used as standard clamping element in the construction of fixtures. UGSUC-14 14 17 0-50 50 138 UFTB14125 UFHN1218 UEPW 12 1500
Also due UGSUC-16 16 17 0-65 50 138 UFTB16160 UFHN1624 UEPW 16 1500
to fast clamping & unclamping with positive downward force it is UGSUC-18 18 17 0-65 50 138 UFTB18160 UFHN1624 UEPW 16 1500
widely used UGSUC-16 16 21 0-75 60 175 UFTB16160 UFHN1624 UEPW 16 2740
UGSUC-18 18 21 0-75 60 175 UFTB18160 UFHN1624 UEPW 16 2740
on machine tool pallets, NC machine etc. with or without T-nut.
UGSUC-20 20 21 0-85 60 175 UFTB20200 UFHN2030 UEPW 20 2770
Ü On any T slotted table or with hole having M 12 threading on any UGSUC-22 22 21 0-85 60 175 UFTB22200 UFHN2030 UEPW 20 2800
machine. UGSUC - 17 - 50 138 1300
MATERIAL (s-w/o T-bolt) - - -
Ü Made of Hardened Steel. UGSUC - 21 - 60 175 2100
FINISH (s-w/o T-bolt)
Ü Blackodized.

Model T-Slot Job Height which

would be clamped h3 h2 l1 l2
Dio of Maxi.Ht. Pressure Spanner Weight SUPPORT ELEMENTS
No. min. h1 Max. h4 Cylinder of Clamp kN Requred gms
UGDTC105 14 to 18 70 105 72 93-128 55 43 40 140 10 36A/F 1400 UNIVERSAL STEP BLOCK
UGDTC135 14 to 18 100 135 98 123-158 55 43 40 170 10 36A/F 1700
FEATURES
Ü Universal step blocks are used to obtain required
Model Spanner Requred
Weight supporting heights.
No.
H D gms
Extension Pieces Ü By using 3 sizes by 3 different ways we can obtain
UGDTC/HC - 35 35 40 36A/F 250 different heights.
UGDTC/HC - 70 70 40 36A/F 500 Ü Combination sizes.
1) 50 - 100 gives min. 22 to max. 79 mm
2) 50 - 210 gives min. 22 to max. 104 mm
3) 100 - 210 gives min. 38 to max. 168 mm
LOW DOWN THRUST CLAMP 4) 210 - 210 give min. 60 to max. 208 mm
Ü Teeth profile is such that there is positive locking &
FEATURES faces remain parallel.
Ü Full 3600 range facilitates easy loading and unloading of APPLICATIONS
workpiece. Ü Suitable to use as supporting blocks on any
Ü With the aid of support lugs/self aligning pads even machine.
small height jobs can be clamped. MATERIAL
APPLICATIONS Ü S. G. Iron with high tensile strength.
Ü Can be used for clamping of jobs from top FINISH
l2
where side clamping is likely to deform the Ü Power coated.
l1
component.
Ü Useful for jigs and fixtures.
Adjustable Height Weight
Ü Can be mounted in the fixture plates. Model No.
Min. Max.
L B H gms.
MATERIAL
Ü Heat treated steel.
FINISH UEUSB 50 22 50 24 30 33 100
Ü Precision ground, blackodized. UEUSB 100 38 107 40 30 66 300
UEUSB 210 69 208 73 30 131 1100

Model No. l1 l2 H d1 d2 T M

UGLDTC - 50 43 77 31 19 28 20 M 12 SCREW JACK

FEATURES
Ü Screw Jack is stable robust and free from wear and
STEPLESS UNIVERSAL CLAMP tear..
Ü The height adjustment are made through threaded
FEATURES spindles which is selflocking.
Ü It is top clamping type, rugged and easy to use. Ü Threads are trapezoidal.
Ü Required clamping height can be adopted Ü Holding plate fixes the position of adjustable height
quickly without any supports due to its shape. block Horizontally or vertically.
Ü Swivelling half piece assures perfect clamping. Ü Space required is minimum .
Ü It eliminates loose packing and bad clamping. Ü Tommy bar is an auxiliary tool for easy mounting and adjustment
Ü We supply T bolts. Hex nut & Plain washer along under load.
with this clamp. APPLICATIONS
Ü Also can be supplied without T bolts. Ü Screw Jack is frequently used for supporting work piece.
APPLICATIONS FINISH
Ü Suitable to use where limited machine Ü Blackodized.
table space is available.
Ü Suitable for dies & press tools where
required.
Ü Suitable to use on milling, shaping,
planning machine, press shops, plastic
moulding etc.
MATERIAL
Ü Main body made of S. G. Iron T Bolts &
Hex nut toughened to class 8.8.

4
 Model No. d1 d2 d3 d4 L1 L2 b D1 D2 l1 l2 l3 l4 PARALLELS
USJ 40 31 32 20 - 40 50 40 32 18.5 175 30 35 90 FEATURES
USJ 50 50 50 30 12 50 75 60 50 20.5 190 38 46 90 Ü Paralles are used to support workpiece
USJ 75 50 50 30 12 75 100 60 50 20.5 190 38 46 90
USJ 100 68 65 40 12 100 140 80 70 24.5 210 48 46 90
for various machine operations.
USJ 140 80 70 50 12 140 210 80 70 24.5 210 48 46 90 They can be used for different height
combinations. Matched pair ensure
equal height support.
ADJUSTABLE HEIGHT PLATE MATERIAL
Ü Hardened steel.
FEATURES
Ü Required supporting height is achieved FINISH
instantaneously with quick Ü Ground.
adjustment of plates. Ü Uses heat - treated
Ü Required extra height could be achieved by steel for strength and durability. Dimensions as per IS
stacking the blocks. 4241 :1990.
Ü Economical & saves time & human fatigue in Ü Supplied in pairs in suitable attractive wooden boxes.
getting required spacers every time.
Ü Compact, safe & reliable supporting
Size Parallelism Weight kg/pair
system.
Ü Used with or without exact height 5 X 10 X 100 0.010 0.580
setter. 10 X 20 X 125 1.400
APPLICATIONS 15 X 30 X 150 2.600
Ü Suitable to use any machine as 20 X 40 X 200 4.500
supporting height block or spacer.
MATERIAL 25 X 50 X 250 0.012 7.00
Ü Made of steel. 30 X 60 X 300 8.600
FINISH
Ü Blackodized. 40 X 80 X 350 0.020 17.600
50 X 100 X 400 32.200

Model No. Single Plate Thickness H B L Weight

gms. FIXTURE ACCESSORIES
UEAHP 225 2 25 35 50 350
UEAHP 250 2 50 35 50 650 SELF ALIGNING PAD-Male Thread
UEAHP 275 2 75 35 50 1000
UEAHP 2100 2 100 50 60 2200 FEATURES
UEAHP 2125 2 125 50 60 2900 Ü Useful for clamping the job from top or
UEAHP 2150 2 150 50 60 3400 bottom
UEAHP 425 4 25 50 60 600 Ü The ball swivels and provides contact
UEAHP 450 4 50 50 60 1100 with no damage to surface.
UEAHP 475 4 75 50 60 1600 MATERIAL
UEAHP 4100 4 100 60 75 3000 Ü Body Steel.
UEAHP 4150 4 150 60 75 3950 Type C Type F
Ü Ball : Hardened bearing quality.
UEAHP 4200 4 200 60 75 6400 FINISH
Ü Body, Blackodized. Ball hardened.
NOTE
Ü These self-aligning pads serve as stops,
EXACT HEIGHT SETTER supports & thrust elements in Jigs &
Fixtures. They can also be fitted to existing
FEATURES clamping elements.
Ü Quick lifting & lowering of adjustable height Ü These pads are useful for holing
plates. components firmly on machines, While
Ü Smooth sliding movement. eliminating chances of vibration / chatter
Ü Compact & wedge type construction. which may be induced due to insufficient
Ü Heat treated steel for strength & clamping forces exerted due to point
durability. contact.
APPLICATIONS
Ü For accurate and fine adjustment of With Male Thread Type C (Plain) or F (Serrated)
supporting height. It is used along with
Model No Max load
adjustable height plate. capacity kN
d1 d2 d3 L1 L2 A/F S Weight
MATERIAL (for static gms.
Type C Type F (ref)
Ü Made of Hardened Steel. load only)
FINISH SAPMT-C M6 SAPMT-F M6 13 M6 7.2 13 8 13 2 10 12
Ü Blackodized. SAPMT-C M8 SAPMT-F M8 13 M8 7.2 13 8 11 2 10 13
SAPMT-C M10 SAPMT-F M10 20 M10 10.5 18 10 17 3 25 40
SAPMT-C M12 SAPMT-F M12 20 M12 10.5 18 12 17 3 25 40
SAPMT-C M16 SAPMT-F M16 30 M16 20 27 16 27 3 90 100
Weight SAPMT-C M20 SAPMT-F M20 50 M20 34.5 35 20 41 6.5 165 520
Model No. Suitable to Plate Thickness H B L
gms.

UEEHS 220 2 20 30 60 175 SELF ALIGNING PAD-Female Thread

UEEHS 425 4 25 35 85 400
FEATURES
Ü Useful for clamping the job from top or bottom
Ü The ball swivels and provides contact with no damage to surface.

5
 insufficient clamping forces exerted due to point contact.
MATERIAL
Ü Body Steel.
Ü Body Blackodised, Ball Hardened.

MATERIAL
BALL ENDED THRUST SCREW WITH TYPE C (PLAIN) OR F (SERRATED)
Ü Body Steel.
Ü Ball : Hardened bearing quality. Model No.
d1 d3 L L1 WS
FINISH Type C Type F
Ü Body, Blackodized. Ball hardened. BETSF-C 810 BETSF-F 810 4.5 10 9 4
NOTE BETSF-C 816 BETSF-F 816 4.5 16 15 4
Ü These self-aligning pads serve as stops, BETSF-C 820 BETSF-F 820 M8 4.5 20 19 4
BETSF-C 825 BETSF-F 825 4.5 25 24 4
supports & thrust elements in Jigs & BETSF-C 830 BETSF-F 830 4.5 30 29 4
Fixtures. They can also be fitted to
BETSF-C 1012 BETSF-F 1012 6.0 12 10.9 5
existing clamping elements. BETSF-C 1016 BETSF-F 1016 6.0 16 14.9 5
Ü These pads are useful for holing BETSF-C 1020 BETSF-F 1020 6.0 20 17.9 5
components firmly on machines, While BETSF-C 1025 BETSF-F 1025 M 10 6.0 25 23.9 5
eliminating chances of vibration / BETSF-C 1030 BETSF-F 1030 6.0 30 28.9 5
BETSF-C 1035 BETSF-F 1035 6.0 35 33.9 5
chatter which may be induced due to BETSF-C 1040 BETSF-F 1040 6.0 40 38.9 5
insufficient clamping forces exerted BETSF-C 1216 BETSF-F 1216 7.2 16 14.4 6
due to point contact. BETSF-C 1220 BETSF-F 1220 7.2 20 18.4 6
M 12 23.4
BETSF-C 1225 BETSF-F 1225 7.2 25 6
With Female Thread Type C (Plain) or F (Serrated) BETSF-C 1230 BETSF-F 1230 7.2 30 28.4 6
BETSF-C 1240 BETSF-F 1240 7.2 40 38.4 6
Model No Max load 48.4
d1 d2 d3 L1 L2 A/F capacity kN BETSF-C 1250 BETSF-F 1250 7.2 50 6
(ref) (for static BETSF-C 1620 BETSF-F 1620 10.7 20 18.4 8
Type C Type F load only) M 16
BETSF-C 1625 BETSF-F 1625 10.7 25 23.4 8
BETSF-C 1635 BETSF-F 1635 10.7 35 33.4 8
SAPFT-C M3 SAPFT-F M3 13 M3 x 0.5 7.2 5.9 11 11 2 BETSF-C 1640 BETSF-F 1640 10.7 40 38.4 8
SAPFT-C M4 SAPFT-F M4 20 M4 x 0.7 10.5 10.2 15 17 3 BETSF-C 1650 BETSF-F 1650 10.7 50 48.4 8
SAPFT-C M5 SAPFT-F M5 30 M5 x 0.8 20.0 15.6 24 27 3 BETSF-C 2030 BETSF-F 2030 M 20 13.5 20 28.0 10
BETSF-C 2040 BETSF-F 2040 13.5 40 38.0 10
BETSF-C 2050 BETSF-F 2050 13.5 50 48.0 10
BETSF-C 2060 BETSF-F 2060 13.5 60 58.0 10
ADJUSTABLE SELF ALIGNING PAD
FEATURES SPRING PLUNGERS
Ü Useful for clamping the job from top
or bottom Spring plungers are used for variety of applications.
Ü
Ü The ball swivels and provides Used in Jigs& Fixtures.
Ü
contact with no damage to surface. Machine tool buildings, welding fixture.
Ü
MATERIAL Plastic moulding machines , etc.
Ü
Ü Body Steel. These all are used wherever the return of job to the position is required.
Ü
Ü Ball : Hardened bearing quality. These are also required for wiper motors & limit switches.
Ü
FINISH
Ü Power coated & Blackodized. Type 1203
NOTE With internal Hexagon & Ball plunger
Ü
Ü These self aligning pads serve as stops, supports & Body : Steel, Black passivated
thrust elements in Jigs & Fixtures. They can also be Spring : Stainless steel 302.
fitted to existing clamping elements. Ball : Ball bearing steel, hardened.
Ü These pads are useful for holing components firmly E
on machines, While eliminating chances of
vibration / chatter which may be induced due to
insufficient clamping forces exerted due to point contact.
Ü Can be adjusted to variations in different heights.

With Male Thread Type C (Flat) or F (Serrated) Spring load

Model No Max load Model No. d1 d2 L S WS
O capacity kN F1 F2
S d1 L L1 O d2 E (Ball dia.) gms
Type C Type F BALL (for static N N
load only)
SAPA-C M8 SAPA-F M8 13 M8 36.6 25 5.8 14.5 8.5 8 UEBSHSP 512 M5 3 14 0.9 2.5 8 14 1.2
SAPA-C M10 SAPA-F M10 17 M10 45.7 30 8.6 19 12 8 UEBSHSP 615 M6 3.2 15 1.0 3 11 18 1.8
SAPA-C M12 SAPA-F M12 17 M12 50.7 35 8.6 19 12 15 UEBSHSP 818 M8 4.2 18 1.5 4 18 31 3.9
SAPA-C M16 SAPA-F M16 24 M16 60.7 40 10.5 27 16 25 UEBSHSP 1023 M 10 6.3 23 2.0 5 24 35 8.1
SAPA-C M20 SAPA-F M20 24 M20 77.3 50 20 33 25 90 UEBSHSP 1226 M 12 8.0 26 2.5 6 26 49 13
UEBSHSP 1633 M 16 9.5 33 3.5 8 41 86 32

BALL ENDED THRUST SCREW Type 1204

APPLICATIONS With Slotted head & ball type.
Ü
Ü These Ball ended thrust screw plunger
serves as stops, supports & thrust Body : Steel, Black passivated
elements in Jigs & Fixtures. They Spring : Stainless steel 302
can also be fitted to existing Ball : Ball bearing steel, hardened.
clamping elements.
Ü These pads are useful for holding
components firmly on machines,
While eliminating chances of
vibration/chatter which may be induced due to

6
 Spring load
Spring load
Model No. d1 d2 L S Wt
F1 F2 gms Model No. d1 d2 L S WS
(Ball dia.) F1 F2 gms
N N
N N
UEBSSP 409 M4 2.5 9 0.8 8.5 14 0.4
UEBSSP 512 M5 3.0 12 0.9 8 14 1.0 UEGSP 518 M5 2.4 18 2.3 1.5 6 19 1.3
UEBSSP 614 M6 3.2 14 1.0 11 18 1.7 UEGSP 620 M6 2.7 20 2.5 2 6 19 2.5
UEBSSP 816 M8 4.5 16 1.5 18 31 3.5 UEGSP 822 M8 3.5 22 3.0 2.5 10 39 6
UEBSSP 1019 M 10 6.3 19 2.0 24 45 6.6 UEGSP 1022 M10 4.0 22 3.0 3 10 39 9
UEBSSP 1222 M 12 8.0 22 2.5 26 49 11 UEGSP 1228 M12 6.0 28 4.0 4 12 53 16
UEBSSP 1624 M 16 9.50 24 3.5 41 86 23 UEGSP 1632 M16 7.5 32 5.0 5 45 100 35

Type 1205
With Slotted head & pin type, Plunger Body : Steel, Black passivated
Ü
EYE BOLTS
Spring : Stainless steel 302, Plunger pin : EN8, Black
FEATURES
Ü High strength fully machined & toughened.
Ü Renamed hole for smooth movement.
MATERIAL
Ü Steel 8.8
FINISH
Ü Blackoized.
Spring load
Model No. d1 d2 L S Wt
F1 F2 gms
(Pin dia.) N N
UESSP 512 M5 2.4 12 2.0 5.0 13.0 0.9
UESSP 614 M6 2.7 14 2.0 6.0 17.0 1.5
UESSP 816 M8 3.8 16 2.0 16.0 33.0 3.5
UESSP 1019 M 10 4.5 19 2.5 19.0 42.0 7.0
UESSP 1222 M 12 6.2 22 3.5 22.0 57.0 10.0
UESSP 1624 M 16 8.5 24 4.5 38.0 78.0 24.0 Product S Wt
d1 l1 l2 d2 d3 d4
Code 0.2 gms
Type 1206
191180 50 7 6.0 50
M6 32 6 14
With internal hexagon & pin type plunger. slot at
Ü plunger end for
191290 75 65
adjustment.
Body : Steel, Black passivated. 192170 50 75
M8 32 8 18 9 8.0
Spring : Stainless steel 302, Plunger pin : EN8, Black 192280 75 100
193160 50 10 20 12 10.00 120
M 10
193270 75 1500
194260 75 170
M 12 40 12 25 14 10.8
194370 100 200
194480 130 230

CLAMPING KIT
FEATURE
Ü Clamping Kit contains all the most important elements required for quick clamping & locating the work piece on tables having T slot.
MATERIAL
Ü Materials for individual items as per details available elsewhere.
FINISH
Ü Blackodized & Yellow Passivated.

For contents of clamping kit box

Please turn overleaf.

7
 MODEL CK - 1210 CK - 1412 CK - 1612 CK - 1812 CK - 1816 CK - 2016 CK - 2216
QTY QTY QTY QTY QTY QTY QTY
CONTENTS
T-NUTS UFTN 1210 6 UFTN 1412 6 UFTN 1612 6 UFTN 1812 6 UFTN 1816 6 UFTN 2016 6 UFTN 2216 6

CLAMPING UFCS 1065 4 UFCS 1265 4 UFCS 1265 4 UFCS 1265 4 UFCS 1680 4 UFCS 1680 4 UFCS 1680 4
STUDS UFCS 1080 4 UFCS 1280 4 UFCS 1280 4 UFCS 1280 4 UFCS 16100 4 UFCS 16100 4 UFCS 16100 4
UFCS 10100 4 UFCS 12100 4 UFCS 12100 4 UFCS 12100 4 UFCS 16125 4 UFCS 16125 4 UFCS 16125 4
UFCS 10125 4 UFCS 12125 4 UFCS 12125 4 UFCS 12125 4 UFCS 16150 4 UFCS 16150 4 UFCS 16150 4
UFCS 10160 4 UFCS 12160 4 UFCS 12160 4 UFCS 12160 4 UFCS 16175 4 UFCS 16175 4 UFCS 16175 4
UFCS 10200 4 UFCS 12200 4 UFCS 12200 4 UFCS 12200 4 UFCS 16200 4 UFCS 16200 4 UFCS 16200 4

FLANGE
NUTS UFFHN 1015 6 UFFHN 1218 6 UFFHN 1218 6 UFFHN 1218 6 UFFHN 1624 6 UFFHN 1624 6 UFFHN 1624 6

EXTENSION
NUTS UFEN 1030 4 UFEN 1236 4 UFEN 1236 4 UFEN 1236 4 UFEN 1648 4 UFEN 1648 4 UFEN 1648 4

STRAP UPSC 1060 2 UPSC 1265 2 UPSC 1265 2 UPSC 1265 2 UPSC 1675 2 UPSC 1675 2 UPSC 1675 2
CLAMP UPSC 1080 2 UPSC 12100 2 UPSC 12100 2 UPSC 12100 2 UPSC 16125 2 UPSC 16125 2 UPSC 16125 2
UPSC 10100 2 UPSC 12125 2 UPSC 12125 2 UPSC 12125 2 UPSC 16160 2 UPSC 16160 2 UPSC 16160 2

STEP UEUSB 50 2 UEUSB 50 2 UEUSB 50 2 UEUSB 50 2 UEUSB 50 2 UEUSB 50 2 UEUSB 50 2

BLOCKS UEUSB 100 2 UEUSB 100 2 UEUSB 100 2 UEUSB 100 2 UEUSB 100 2 UEUSB 100 2 UEUSB 100 2
UEUSB 200 2 UEUSB 200 2 UEUSB 200 2 UEUSB 200 2 UEUSB 200 2 UEUSB 200 2 UEUSB 200 2

TOTAL FOR
ACCESSORIES 52 52 52 52 52 52 52

Clamping Elements
STRAP CLAMP IS 4292-1984/DIN 6314-1980 MODEL NO.
FOR BOLTS
d l a b h w w1
weight
kg
OF
MATERIAL
UPSC 860 M8 9 60 13 22 12 25 10 0.110
Ü Heat treated steel blackened / UPSC 1080 M10 11 80 15 30 16 30 12 0.220
yellow passivated UPSC 12100 M12 14 100 21 40 20 40 14 0.490
UPSC 12125 M12 14 125 21 50 20 40 14 0.600
UPSC 16125 M16 18 125 26 45 25 50 18 1.000
UPSC 16160 M16 18 160 26 65 25 50 18 1.200
UPSC 20160 M20 22 160 30 60 30 60 22 1.830
UPSC 20200 M20 22 200 30 80 30 60 22 2.290
UPSC 24200 M24 26 200 30 80 40 70 26 3.400
UPSC 24250 M24 26 250 35 105 40 70 26 3.850
UPSC 30250 M30 33 250 45 100 40 80 34 4.980
UPSC 30315 M30 33 315 45 130 50 80 34 7.840

FOR BOLTS h weight

MODEL NO. d l t t1 t2
OF appr. kg
OPEN-ENDED STRAP CLAMP
IS 4293-1984/DIN 6315B-1980 UPOESC 880 M8 9 80 15 8 4 25 0.150
UPOESC 10100 M10 11 100 20 10 5 31 0.300
MATERIAL UPOESC 12125 M12 14 125 25 12 6 38 0.570
UPOESC 12160 M12 14 160 25 12 6 38 0.730
Ü Heat treated steel blackened. UPOESC 12200 M12 14 200 25 12 6 38 0.910
UPOESC 16160 M16 18 160 30 16 8 50 1.080
UPOESC 16200 M16 18 200 30 16 8 50 1.360
UPOESC 16250 M16 18 250 30 16 8 50 1.700
UPOESC 20200 M20 22 200 40 20 10 62 1.800
UPOESC 20250 M20 22 250 40 20 10 62 3.020
UPOESC 20315 M20 22 315 40 20 10 62 3.830
UPOESC 24200 M24 26 200 40 20 10 66 2.400
UPOESC 24250 M24 26 250 40 20 10 66 3.050
UPOESC 24315 M24 26 315 40 20 10 66 3.830
UPOESC 30250 M30 33 250 50 20 12 74 3.720
UPOESC 30315 M30 33 315 50 20 12 74 4.750
UPOESC 30400 M30 33 400 50 20 12 74 6.100

C WASHER IS4291-1996/DIN 6372-1972

MODEL NO. FOR BOLTS D d d1 s Weight gms
MATERIAL OF
Ü Steel Heat treated blackodized. UECW 8 M8 28 8.4 21 7 22
UECW 10 M10 34 10.5 25 8 40
UECW 12 M12 40 13 30 9 58
UECW 16 M16 56 17 37 12 165
UECW 20 M20 64 21 45 14 230
UECW 24 M24 75 25 52 16 320
UECW 30 M30 90 31 65 18 -

8
HEX NUT DIN 6330-1991 (hight 1.5d)
MODEL NO. M D1 S E
D Weight gms
MATERIAL
Ü Steel quality 8.8 Yellow passivated UFHN 812 M8 12 9 13 15 9.6
UFHN 1015 M10 15 11.5 17 19.6 21
UFHN 1218 M12 18 14 19 21.9 31.5
UFHN 1624 M16 24 18 24 27.7 61
UFHN 2030 M20 30 22 30 34.5 120
UFHN 2436 M24 36 26 36 41.6 206
UFHN 3045 M30 45 32 46 53.1 419

T NUT IS 2015 1977/ DIN 508-1991 MODEL NO. T-SLOT a d h k S Weight gms
SIZE
MATERIAL
UFTN 86 8 7.6 M6 10 6 13 8
Ü Steel quality 8.8 Yellow passivated UFTN 108 10 9.6 M8 12 6 15 14
UFTN 1210 12 11.6 M10 14 7 18 22
UFTN 1412 14 13.6 M12 16 8 22 34
UFTN 1612 16 15.6 M12 18 9 25 56
UFTN 1816 18 17.6 M16 20 10 28 68
UFTN 2016 20 19.6 M16 24 12 32 107
UFTN 2220 22 21.6 M20 28 14 35 155
UFTN 2824 28 27.6 M24 36 18 44 330
UFTN 3630 36 35.6 M30 44 22 54 750

CLAMPING STUD IS 13178-1991/ DIN 6379-1991

MATERIAL b b1 l d weight MODEL NO. b b1 l d weight

MODEL NO.
gms gms
Ü Heat treated steel 8.8
Yellow passivated UFCS 840 20 11 40 M8 15 UFCS 1665 40 19 65 M16 85
Note :Studs combined UFCS 850 25 11 50 M8 15 UFCS 1680 50 19 80 M16 105
11 65 M8 20 UFCS 16100 63 19 100 M16 130
with T-nuts (IS:2015) UFCS 865 40
UFCS 16125 75 19 125 M16 160
Hex Nut (DIN 6330) UFCS 880 55 11 80 M8 25
UFCS 16160 100 19 160 M16 210
and UFCS 8100 63 11 100 M8 30 UFCS 16200 125 19 200 280
M16
plain washer UFCS 1050 25 13 50 M10 25 UFCS 16250 160 19 250 M16 325
(DIN 6340) UFCS 1065 40 13 65 M10 32 UFCS 16315 180 19 315 M16 425
become complete UFCS 1080 50 13 80 M10 40 UFCS 2080 32 27 80 M20 185
clamping studs UFCS 10100 63 13 100 M10 50 UFCS 20100 45 27 100 M20 230
UFCS 10125 75 13 125 M10 65 UFCS 20125 70 27 125 M20 255
UFCS 10160 100 13 160 M10 80 UFCS 20160 100 27 160 M20 330
UFCS 10200 125 13 200 M10 100 UFCS 20200 125 27 200 M20 470
UFCS 1250 25 15 50 M12 35 UFCS 20250 160 27 250 M20 510
UFCS 1265 35 15 65 M12 50 UFCS 20315 190 27 315 M20 640
15 80 M12 60 UFCS 20400 250 27 315 M20 815
UFCS 1280 50
UFCS 24100 45 35 100 M20 290
UFCS 12100 63 15 100 M12 70
UFCS 24125 63 35 125 M24 380
UFCS 12125 75 15 125 M12 90 UFCS 24160 100 35 160 M24 470
UFCS 12160 100 15 160 M12 115 UFCS 24200 125 35 200 M24 580
UFCS 12200 125 15 200 M12 140 UFCS 24250 160 35 250 M24 725
UFCS 12250 160 15 250 M12 180 UFCS 24315 200 35 315 M24 920
UFCS 12315 180 15 315 M12l 225 UFCS 24400 250 35 400 M24 1160
UFCS 24630 315 35 630 M24 1850

SPHERICAL WASHER WITH CONICAL SEAT

IS 4297-1996 TYPE A/DIN 6319-1991

MATERIAL
Ü Steal heat treated blackended

MODEL NO. FOR d1 d2 d3 d4 d5 f1 h1 h2 h3 h4 r1 weight gms

BOLTS s d
UESWCS 8 M8 8.4 9.6 17 17 14.5 0.5 0.6 3.2 3.5 5 12 2.5 3.5
UESWCS 10 M10 10.5 12 21 21 18.5 0.5 0.8 4 4.2 6.3 15 5 6.7
UESWCS 12 M12 13 14.2 24 24 20 0.5 1.1 4.6 5 8.0 17 5 6.7
UESWCS 16 M16 17 19 30 30 26 0.5 1.3 5.3 6.2 9.3 22 12.7 18
UESWCS 20 M20 21 23.2 36 36 31 0.5 2 6.3 7.5 11.5 27 22 31
UESWCS 24 M24 25 28 44 44 37 0.8 2.4 8.2 9.5 15 32 43 61

STRAP CLAMP WITH GRUB SCREW & THRUST PAD

MATERIAL MODEL NO. b1 h2 h3 l1 d l1 S weight gms
Ü Material steel heat treated Yellow passivated
UPSTSC 12125 14 10 71 100 M12 15 3 590
UPSTSC 16160 18 12 90 125 M16 20 3 1220

9
EXTENSION NUT
UNISON STANDARD (Height 3d) MODEL NO. D M S E Weight
gms
MATERIAL UFEN 824 M8 24 13 15 19
Ü Steel quality 8.8 Yellow passivated. UFEN 1030 M10 30 17 19.6 42
UFEN 1236 M12 36 19 21.9 64
UFEN 1648 M16 48 24 27.7 120
UFEN 2060 M20 60 30 34.5 240
UFEN 2472 M24 72 36 41.5 400
UFEN 3090 M30 90 46 53.1 840

PLAIN WASHER DIN 6340-1987

FOR BOLTS weight
MODEL NO. d1 d2 s gms
MATERIAL OF
Ü Steel quality 8.8 Yellow passivated. UEPW 8 M8 8.4 23 4 10
UEPW 10 M10 10.5 28 4 16
UEPW 12 M12 13 35 5 35
UEPW 16 M16 17 45 6 60
UEPW 20 M20 21 50 6 100
UEPW 24 M24 25 60 8 170
UEPW 30 M30 31 68 10 226

HEEL STRAP CLAMP

IS 4293-1984/DIN 6316-1980

FOR BOLTS weight

MATERIAL MODEL NO. h d l l1 l2 c a W W1
gms
OF
Ü SG Iron tensile
strength 750/850 UPHSC 10100 M10 30 11 100 32 32 12 15 30 15 0.300
N / m m 2 Po w d e r UPHSC 12125 M12 40 14 125 40 40 16 20 40 20 0.680
Coated. UPHSC 16160 M16 50 18 160 49 50 20 25 50 25 1.500
UPHSC 20200 M20 60 22 200 55 70 24 30 60 30 2.500
UPHSC 24250 M24 80 26 250 72 80 32 40 70 35 4.900

T-BOLTS IS 2014-1996/DIN 787-1991

MATERIAL
Ü Heat treated steel quality 8.8 upto T-slot 20 Heat treated steel quality 10.9 above T-slot 22 Finish yellow pssivated / blackened. 'a' dimension is average
Note : T-bolts when combined with hex nuts (DIN 6330) and plain washers (DIN 6340) become complete clamping bolts.

MODEL NO. T-SLOT l a b d e e1 k weight

SIZE gms
UFTB 850 8 50 7.6 35 M8 13 16 6 25
UFTB 865 8 65 7.6 35 M8 13 16 6 32
UFTB 880 8 80 7.6 50 M8 13 16 6 40
UFTB 1050 10 50 9.6 30 M10 15 19 6 40
UFTB 1065 10 65 9.6 45 M10 15 19 6 50
UFTB 1080 10 80 9.6 50 M10 15 19 6 60
UFTB 10100 10 100 9.6 60 M10 15 19 6 70
UFTB 1250 12 50 11.6 35 M12 18 25 7 60
UFTB 1265 12 65 11.6 40 M12 18 25 7 65
UFTB 1280 12 80 11.6 55 M12 18 25 7 75
UFTB 12100 12 100 11.6 65 M12 18 25 7 90
UFTB 12125 12 125 11.6 75 M12 18 25 7 120
UFTB 12160 12 160 11.6 80 M12 18 25 7 145
UFTB 12200 12 200 11.6 120 M12 18 25 7 165
UFTB 12250 12 250 11.6 150 M12 18 25 7 185
UFTB 1450 14 50 13.6 35 M12 22 28 8 70
UFTB 1465 14 65 13.6 40 M12 22 28 8 80
UFTB 1480 14 80 13.6 55 M12 22 28 8 100
UFTB 14100 14 100 13.6 65 M12 22 28 8 110
UFTB 14125 14 125 13.6 75 M12 22 28 8 120
UFTB 14160 14 160 13.6 80 M12 22 28 8 150
UFTB 14200 14 200 13.6 120 M12 22 28 8 180
UFTB 14250 14 250 13.6 150 M12 22 28 8 220
UFTB 1665 16 65 15.6 45 M16 25 32 9 140
UFTB 1680 16 80 15.6 55 M16 25 32 9 160
UFTB 16100 16 100 15.6 65 M16 25 32 9 186
UFTB 16125 16 125 15.6 80 M16 25 32 9 205
UFTB 16160 16 160 15.6 100 M16 25 32 9 264
UFTB 16200 16 200 15.6 100 M16 25 32 9 315
UFTB 16250 16 250 15.6 150 M16 25 32 9 380

10
 UFTB 16315 16 315 15.6 180 M16 25 32 9 440
UFTB 1865 18 65 17.6 45 M16 28 36 10 160
UFTB 1880 18 80 17.6 55 M16 28 36 10 185
UFTB 18100 18 100 17.6 65 M16 28 36 10 203
UFTB 18125 18 125 17.6 65 M16 28 36 10 235
UFTB 18160 18 160 17.6 100 M16 28 36 10 280
UFTB 18200 18 200 17.6 125 M16 28 36 10 330
UFTB 18250 18 250 17.6 150 M16 28 36 10 430
UFTB 18315 18 315 17.6 180 M16 28 36 10 530
UFTB 2080 20 80 19.6 55 M20 32 40 12 290
UFTB 20100 20 100 19.6 65 M20 32 40 12 340
UFTB 20125 20 125 19.6 85 M20 32 40 12 390
UFTB 20160 20 160 19.6 110 M20 32 40 12 470
UFTB 20200 20 200 19.6 125 M20 32 40 12 50
UFTB 20250 20 250 19.6 150 M20 32 40 12 670
UFTB 20315 20 315 19.6 190 M20 32 40 12 800
UFTB 2280 22 80 21.6 55 M20 35 45 14 330
UFTB 22100 22 100 21.6 60 M20 35 45 14 400
UFTB 22125 22 125 21.6 85 M20 35 45 14 428
UFTB 22160 22 160 21.6 100 M20 35 45 14 500
UFTB 22200 22 200 21.6 125 M20 35 45 14 570
UFTB 22250 22 250 21.6 150 M20 35 45 14 680
UFTB 22315 22 315 21.6 190 M20 35 45 14 820
UFTB 24100 24 100 23.6 70 M24 40 50 16 540
UFTB 24125 24 125 26.3 85 M24 40 50 16 640
UFTB 24160 24 160 23.6 110 M24 40 50 16 770
UFTB 24200 24 200 23.6 125 M24 40 50 16 900
UFTB 24250 24 250 23.6 150 M24 40 50 16 1040
UFTB 24315 24 315 23.6 190 M24 40 50 16 1270
UFTB 28100 28 100 27.6 70 M24 44 56 18 650
UFTB 28125 28 125 27.6 75 M24 44 56 18 720
UFTB 28160 28 160 27.6 110 M24 44 56 18 800
UFTB 28200 28 200 27.6 125 M24 44 56 18 950
UFTB 28250 28 250 27.6 150 M24 44 56 18 1120
UFTB 28315 28 315 27.6 160 M24 44 56 18 1350
UFTB 28400 28 400 27.6 250 M24 44 56 18 1500

FLANGE NUT IS 7795-1975 / DIN 6331-1991 MODEL NO. d1 a d2 e M s weight gms

MATERIAL UFFHN 812 M8 3.5 18 15.0 12 13 12
Ü Steel quality 8.8 Yellow UFFHN 1015 M10 4.0 22 18.5 15 16 22
passivated UFFHN 1218 M12 4.0 25 20.8 18 18 31
UFFHN 1624 M16 5.0 31 27.7 24 24 69
UFFHN 2030 M20 6.0 37 34.6 30 30 127
UFFHN 2436 M24 6.0 45 39.98 36 36 230

INFORMATION ON STRENGTH OF THREADED PRODUCTS

Thread Strength M8 M10 M12 M16 M20 M24 M30

Pitch Class 1.25 1.50 1.75 2.00 2.50 3.00 3.50
Nuts
Hardness HRC 8.8 22 - 30
T-bolts, Studs
Hardness HRC 8.8 22 - 30 24 - 34
10.9 32 - 39
TIGHTENING VALUES
Permissible
Nm 80 90 100 125 150 185 240
tourque
normal ring spanner
& torsional force km 53 48 45 43 42 43 43

Required lever length 8.8 85 125 215 490 870 1350

(mm) with normal
manual force. 10.9 90 175 300 700 1200

Continuous efforts for product development may necessitate changes in these details without notice.

11
 UNISON CLAMPING DEVICES
65 Hadapsar Industrial Estate, Pune 411 013 (India)
Phone: (020) 2681 4694, 26870216, Fax: 2681 4693
E-mail:[email protected] l website:www.unitygroup.co.in

ONE POINT SOURCE FOR CLAMPING ELEMENTS,

DEVICES AND FIXTURE ACCESSORIES

The Creation- 020-24454362

Authorised Dealer

S I N C E 1 9 7 0

Marketed by

UNITY MARKETIX PVT. LTD.

109, M.I.D.C. Bhosari, Pune - 411 026 Ph. : +91-2027111183 Fax : +91-20-27120921
Email : [email protected] l Web : www.unitygroup.co.in