Scribd
Upload
227 views

Halltech

This document summarizes CAN and OBDII communications for the Haltech Elite 1500 and 2500 ECUs. It states that there are two independent CAN networks - Vehicle CAN for vehicle communication and Haltech CAN for Haltech device communication. OBDII communications broadcast over the Vehicle CAN network only. It provides wiring information for connecting the OBDII connector to the Main Connector or Aux CAN Port on the ECU.

Uploaded by

Leonardo Villarroel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
227 views

Halltech

This document summarizes CAN and OBDII communications for the Haltech Elite 1500 and 2500 ECUs. It states that there are two independent CAN networks - Vehicle CAN for vehicle communication and Haltech CAN for Haltech device communication. OBDII communications broadcast over the Vehicle CAN network only. It provides wiring information for connecting the OBDII connector to the Main Connector or Aux CAN Port on the ECU.

Uploaded by

Leonardo Villarroel
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Elite Series OBDII Communications

Main Connector (B)

CAN communications with the Elite 1500 and Elite 2500 ecu’s
is possible due to the availability of two independent CAN networks

Vehicle CAN - Used for Vehicle network communication


Haltech CAN - Used for Haltech devices communication

Independent networks can be assigned to either the


Main Connector or the Aux CAN Port depending on the
application and wiring requirements.

OBDII communications with the Elite 1500 and Elite 2500 ecu’s
is broadcast on the Vehicle CAN network ONLY.
OBDII information and diagnostic trouble codes ( DTC’s)
from the ECU can viewed and reset via a CAN compatible
OBDII scantool.

Wiring of the OBDII connector to the Haltech Elite 1500 and 2500 Aux CAN Port
ecu’s is outlined below:

CAN Connection Wiring Information


Main Connector CAN Wiring Aux CAN Port Wiring
Connector B
1

1 7 7
1 12V GND
8 13 DEUTSCH

14 19
LO HI
20 26
26
4

20

Pin 1 - 12V
Pin B11 - 12V
Pin 2 - Ground
Pin B15 - Ground
Pin 3 - CAN High
Pin B23 - CAN High
Pin 4 - CAN Low
Pin B24 - CAN Low

Vehicle Side OBDII Connector to Haltech CAN Wiring Information

Pin 4 - Ground
1 2 3 4 5 6 7 8
Pin 5 - Ground
Pin 6 - CAN High
9 10 11 12 13 14 15 16 Pin 14 - CAN Low
Pin 16 - 12V
Looking into Vehicle OBDII Connector

Version 1.0

You might also like