590 Super M

Series 2 Loader/Backhoe
ENGINE POWERTRAIN HYDRAULICS
Model ......................... Case Family III Transmission .......................... 4-speed Pump ................... Gear-type tandem,
445T/M2 diesel, Tier II certified synchromesh with hydraulically transmission driven
Type............... 4-stroke, turbocharged actuated clutches and electric F/R Main relief pressure
Cylinders ............................................ 4 shuttle control, clutch disconnect 3050 + 50 - 50 psi @ 42.5 gpm
Bore/Stroke.................... 4.09” x 5.19” buttons on the transmission shifter (210 + 3 - 3 bar @ 161 L/min)
(104 x 132 mm) and loader control lever Filtration .............................. 7-micron,
Displacement ............... 272 in3 (4.5 L) Gear ratios Forward Reverse full flow replaceable
Fuel injection............................. Direct 1st...................... 5.491 ............. 4.550 cartridge on return line,
Fuel............................................. Diesel 2nd .................... 3.043 ............. 2.522 condition indicator light for filter
Fuel filter ...................... w/water trap 3rd..................... 1.584 ............. 1.313 Oil cooler ........................ Heavy-duty
Air intake .......................... Cross-flow 4th ..................... 0.793 ............. 0.657 Loader flow @ rated engine rpm
Cooling...................................... Liquid Torque converter 31.5 gpm @ 3050 psi
Engine speeds* (rpm) Ratio ........................................... 2.63 (121 L/min @ 210 bar)
Rated speed, full load ............. 2200 Differential lock................. On-the-go Loader control valve ...... Monoblock
Low idle............................. 800 - 900 push-button activation single lever control for
High idle, no load ........ 2380 - 2480 Front 4WD axle lift, tilt and auxiliary hydraulics,
Horsepower Differential ratio ..................... 2.308 positive hold float and
Gross......... 99 (74 kW) @ 2200 rpm Planetary hub ratio .................... 6.0 return-to-dig
Net ............ 98 (73 kW) @ 2200 rpm Total reduction ratio ............ 13.846 Loader auxiliary hydraulics
Maximum torque @ 1400 rpm Rear axle with full loader flow available
Gross..................... 294 lb·ft (398 N·m) Differential ratio ....................... 2.75 14 to 31.5 gpm
Net ........................ 289 lb·ft (392 N·m) Planetary hub ratio .................... 6.0 (53 to 119 L/min)
Torque rise at rated speed .......... 24% Total reduction ratio ................ 16.5 Backhoe flow @ rated engine rpm
Service brakes.. Individually applied, 42.5 gpm @ 3050 psi
NOTE: *Engine speeds with standard trans- hydraulically actuated, (161 L/min @ 210 bar)
mission. Meets federal emission regu- maintenance-free, self-adjusting, Manual Backhoe Controls
lations. inboard mounted, wet disc Backhoe Control Valve... Monoblock
Disc area .............. 59.6 in2 (.038 m2) open-center, parallel circuits
ENGINE COOLING Parking brakes ............. Mechanically
applied with electric activation
Boom and dipper, with pilot operated
checks.
Radiator
sensors at each brake Pilot Backhoe Controls
Core type ................... Square wave
Travel speeds – mph (km/h) Backhoe Control Valve....... Sectional
Core size area....... 487 in2 (.315 m2)
1st 2nd 3rd 4th closed-center with inlet compensator
Rows of tubes ................................ 5
Forward ..... 3.5 ..... 6.7.... 13.5..... 25.5 and circuits in parallel.
Fan
(5.7) (10.8) (21.7) (41.0) Backhoe auxiliary hydraulics ...........
Style ......... Viscous 9 blade suction
Reverse....... 4.3 ..... 8.1.... 16.3 .... 30.8 Uni-directional flow, adjustable
Diameter ................ 19.2” (488 mm)
(6.9) (13.0) (26.2) (49.6) variable flow from 0 to 36 gpm
Ratio ........................................ 1.35:1
(136L/min)
Water pump
NOTE: Travel speeds at 2324 engine rpm. Control 0peration
Style ..................................... Integral
Manual... Foot switch activated
Engine oil
Pump....... Deep sump plate cooler ELECTRICAL Pilot ........Button on left joystick
with pressurized Voltage .... 12 volts, negative ground
Alternator ............................... 90 amp Bi-Directional flow, variable flow from
under-piston nozzles
Battery........ 850 cold-cranking amps 0 to 42.5 gpm
Pump operating angle ratings
Optional batteries ................... (2) 600 (161 L/min) @ rated engine rpm
Side-to-side ...................... Rated 35°
cold-cranking amps Control operation
Fore and aft...................... Rated 35°
Power plugs.............. (2) 30 amps ea. Manual .................... Hand lever
Oil filtration ................ Replaceable,
Pilot ......Buttons on left joystick
full-flow cartridge

TIRES
Front
2WD – 14.5/75 x 16.1, 10-ply
4WD – 14 x 17.5, 10-ply
Rear
2/4WD – 21L x 24, 10-ply Page 1 of 6
OPERATOR ENVIRONMENT OPERATING WEIGHTS LOADER
ROPS/FOPS canopy Lightest Configuration Single-lever control for lift and tilt
Key start Unit equipped with 2WD, ROPS Positive hold float
Hydrostatic steering canopy, non-suspension seat, Return-to-dig
Non-suspension seat w/180° swivel 93” (2.36 m) general purpose loader Automatic self-leveling
Hand and foot throttles bucket, 24” (610 mm) Universal In-line, reverse linkage
Loader control lever w/push-button backhoe bucket, standard dipper- Dual parallel dump cylinders
activation of differential lock and stick, 21L x 24 rear tires, 14.5/75 x Clutch disconnect button on loader
transmission de-clutch 16.1 front tires, single battery, control and shift levers
Backhoe foot-swing w/3 lever standard cast stabilizer pads, no Bucket position indicator
control operator ................ 15,268 lb (6926 kg) Loader Bucket Sizes
(2) Accessory power plugs (30 amp) Heavy Configuration General Purpose Bucket
Anti-vandalism covers (canopy only) Unit equipped with 4WD, cab, (w/ lift points and bolt-on cutting edge)
Cup holder suspension seat, 93” (2.36 m) Width Weight Struck Heaped
Coat hook w/tether strap (cab only) 4 IN 1® loader bucket, 24” (610 mm) 93” 1,123 lb 1.1 yd3 1.3 yd3
Interior rearview mirror Universal backhoe bucket, (2.36 m) (509 kg) (0.84 m3) (1.0 m3)
2” (51 mm) retractable seat belt Extendahoe® dipperstick, 96” 1,324 lb 1.27 yd3 1.5 yd3
Storage compartment w/lid dual batteries, flip stabilizer pads, no (2.44 m) (601 kg) (0.97 m3) (1.15 m3)
Left side storage tray operator ................ 19,578 lb (8881 kg)
4 IN 1® Bucket
INSTRUMENTATION Add-on weights
93” 1,628 lb 1.0 yd3 1.2 yd3
Gauges Cab (over canopy) ... +454 lb (206 kg)
(2.36 m) (738 kg) (0.76 m3) (0.92 m3)
Engine water temperature Counterweights........ +440 lb (200 kg)
Converter oil temperature +900 lb (408 kg)
Fuel Extendahoe® ............. +270 lb (122 kg)
BACKHOE
Over-center design
Tachometer/hourmeter 4WD w/driveshaft guard....... +393 lb
Cast, ductile iron boom, and swing
Voltmeter (178 kg)
tower
Warning lights
Open-center hydraulics - Pro Control
Air cleaner restriction SERVICE CAPACITIES System
Alternator Fuel tank ..................... 42.0 gal (159 L)
17, 940 lb·ft (24 370 N·m) swing torque
A/C low/high pressure Hydraulic system
Case attachment coupler
Cold start Total ....................... 34.25 gal (130 L)
Foot-swing w/3 lever control
Engine oil pressure Total w/Extendahoe® ........ 35.75 gal
Wing stabilizers w/cleated dirt pad
Hydraulic oil filter bypass (135.7 L)
Parking brake Reservoir w/filter.. 14.5 gal (54.9 L) Backhoe Bucket Sizes
Rear axle fluid temperature Reservoir w/o filter ... 14.0 gal (53 L) Universal Buckets
sensing system Transmission Width Weight Heaped
Low fuel 2WD Total system .. 19.5 qt (18.5 L) 12”................ 290 lb .......... 3.40 ft3
Audible alarms 4WD Total system .. 22.0 qt (20.8 L) (305 mm) (132 kg) (0.10 m3)
Coolant temperature 4WD Front axle 16”................ 346 lb .......... 3.60 ft3
Engine oil pressure Differential................... 6.9 qt (6.5 L) (406 mm) (157 kg) (0.10 m3)
Parking brake engagement Planetaries (each)........ 1.1 qt (1.0 L) 18”................ 350 lb .......... 5.30 ft3
Shuttle engagement/seat position Rear axle (457 mm) (159 kg) (0.15 m3)
Backup alarm Differential............... 15.0 qt (14.2 L) 24”................ 413 lb .......... 7.70 ft3
Turn signal indicators Planetaries (each)........ 2.0 qt (2.1 L) (610 mm) (187 kg) (0.22 m3)
Horn - dual switched front & rear Engine oil w/filter ...... 14.4 qt (13.6 L) 30”................ 475 lb ......... 10.20 ft3
Cooling system (762 mm) (215 kg) (0.29 m3)
TURNING DIAMETER w/heater ................... 19.0 qt (18.0 L) 36”................ 535 lb ......... 12.70 ft3
2WD w/o heater................ 18.3 qt (17.3 L) (914 mm) (243 kg) (0.36 m3)
Brakes on................ 25’0.4” (7.63 m) Window washer reservoir......... 2.5 qt
Brakes off................. 25’11” (7.90 m) (2.36 L) High Capacity Buckets
4WD – engaged Width Weight Heaped
Brakes on................... 26’5” (8.04 m) 24”................ 450 lb .......... 8.50 ft3
Brakes off................. 29’10” (9.08 m) (610 mm) (204 kg) (0.24 m3)
4WD – disengaged 30”................ 517 lb ......... 10.60 ft3
Brakes on................... 24’8” (7.51 m) (762 mm) (235 kg) (0.3 m3)
Brakes off................... 25’6” (7.78 m)

NOTE: Turning diameter dimensions curb to

curb w/general purpose bucket. 590 Super M – page 2 of 6
 J

N B
E
H

O L K
M

LOADER DIMENSIONS
General Purpose Bucket 4 IN 1® Bucket
A. Overall operating height – fully raised ....................................................................... 14’2” (4.32 m) ............. 14’6” (4.43 m)
Height to –
B. Bucket hinge pin fully raised..................................................................................... 11’5” (3.47 m).............. 11’5” (3.47 m)
C. Bucket hinge pin @ SAE carry ................................................................................ 13.7” (349 mm) ........... 14.9” (379 mm)
D. Dump angle @ full height................................................................................................................. 45° ................................ 45°
E. Dump clearance @ full height, 45° dump –
Bucket.............................................................................................................................. 9’0” (2.75 m) ............... 9’2” (2.78 m)
Clam open....................................................................................................................................... NA ............... 9’10” (3.0 m)
F. Dump reach @ full height, 45° dump –
Bucket ......................................................................................................................... 27.5” (699 mm) ........... 25.9” (659 mm)
Clam open....................................................................................................................................... NA ........... 11.5” (293 mm)
Bucket rollback –
G. @ groundline ................................................................................................................................... 40° ................................ 40°
H. @ SAE carry..................................................................................................................................... 45° ................................ 45°
J. @ full height....................................................................................................................... Adjustable ................... Adjustable
K. Digging depth below grade –
Bucket flat....................................................................................................................... 3.8” (96 mm) ............. 4.3” (109 mm)
Clam open (dozing) ...................................................................................................................... NA ............... 1.7” (42 mm)
L. Reach from front axle centerline – bucket on ground ............................................... 77.6” (1.97 m).............. 75.2” (1.91 m)
Lift capacity to full height ....................................................................................... 7,327 lb (3323 kg) ....... 7,437 lb (3373 kg)
Breakout force –
Lift cylinders..................................................................................................... 10,729 lbf (47 725 N) .. 10,294 lbf (45 790 N)
Dump cylinders ............................................................................................... 10,980 lbf (48 841 N) .. 12,004 lbf (53 396 N)
Bucket cutting edge width................................................................................................ 93” (2.36 m)................. 93” (2.36 m)
Maximum grading angle ................................................................................................................ 116°............................... 116°
Maximum clam opening.................................................................................................................. NA ........... 38.3” (972 mm)
Moldboard height ............................................................................................................................. NA ........... 36.8” (934 mm)
Raising time to full height .......................................................................................................... 4.7 sec........................... 4.7 sec
Bucket dumping time.................................................................................................................. 1.2 sec........................... 1.2 sec
Lowering time –
Power down .............................................................................................................................. 2.8 sec........................... 2.8 sec
Return-to-dig............................................................................................................................. 3.1 sec........................... 3.1 sec
Clam –
Open time ....................................................................................................................................... NA........................... 2.3 sec
Close time ....................................................................................................................................... NA........................... 2.3 sec
NOTE: Loader dimensions taken with 4WD.
590 Super M – page 3 of 6
 DIMENSIONS
Standard Backhoe Extendahoe®
Retracted Extended
M. Overall transport length –
General purpose bucket ........................................... 23’7” (7.13 m) .............. 23’7” (7.19 m) ................................. NA
4 IN 1® bucket............................................................ 22’7” (6.88 m) .............. 22’8” (6.91 m) ................................. NA
Overall transport width................................................. 7’9” (2.36 m) ................ 7’9” (2.36 m) ................................. NA
Height –
To top of canopy........................................................ 8’11” (2.73 m) .............. 8’11” (2.73 m) ............... 8’11” (2.73 m)
To top of cab............................................................... 8’10” (2.69 m) .............. 8’10” (2.69 m) ............... 8’10” (2.69 m)
To top of exhaust stack............................................... 8’7” (2.62 m) ................ 8’7” (2.62 m) ................. 8’7” (2.62 m)
N. Transport..................................................................... 11’2” (3.41 m) .............. 11’7” (3.54 m) ................................. NA
Ground clearance at backhoe frame........................ 14.6” (371 mm)............ 14.8” (375 mm) ............ 14.8” (375 mm)
Angle of departure .......................................................................... 23° ................................. 23°.................................. 23°
Front wheel tread –
2WD............................................................................. 72.6” (1.84 m) .............. 72.6” (1.84 m) ................................. NA
4WD............................................................................. 73.4” (1.86 m) .............. 73.4” (1.86 m) ................................. NA
Rear wheel tread ........................................................... 69.9” (1.78 m) .............. 69.9” (1.78 m) ................................. NA
O. Wheelbase –
2WD................................................................................ 84” (2.13 m) ................. 84” (2.13 m) ................................. NA
4WD............................................................................. 84.5” (2.15 m) .............. 84.5” (2.15 m) ................................. NA

NOTE: Dimensions taken with 21L x 24 rear tires and 14.5/75L x 16.1 front tires except that data marked 4WD is taken with 14 x 17.5
front tires.

CYLINDERS
Bore Diameter Rod Diameter Stroke
Loader
Lift (2) ........................................................................... 3.5” (89 mm)........... 1.75” (44.5 mm) ............ 30.2” (766 mm)
Bucket (2) ................................................................... 3.25” (83 mm)........... 1.75” (44.5 mm) ............ 20.6” (522 mm)
4 IN 1® clam (2) ........................................................... 3.0” (76 mm)........... 1.75” (44.5 mm) .............. 9.1” (231 mm)
Backhoe
Boom........................................................................ 5.5” (139.7 mm)................ 2.5” (63 mm) ............ 38.4” (976 mm)
Dipperstick ............................................................. 5.5” (139.7 mm)........... 2.75” (69.9 mm) ......... 22.2” (564.2 mm)
Bucket ......................................................................... 3.75” (95 mm)........... 2.75” (69.9 mm) ............ 34.3” (872 mm)
Extendahoe® ................................................................ 3.0” (76 mm)........... 1.75” (44.5 mm) ............... 48.0” (1.22 m)
Swing (2) ................................................................. 4.0” (101.6 mm)............. 2.0” (50.8 mm)............. 11.5” (292 mm)
Stabilizer (2)............................................................... 5.0” (127 mm)........... 2.25” (57.2 mm) ......... 20.4” (519.4 mm)
Steering
2WD ......................................................................... 2.75” (69.9 mm)............. 1.5” (38.1 mm) .............. 6.7” (170 mm)
4WD ............................................................................ 2.48” (63 mm)............. 1.5” (38.1 mm) ............ 9.53” (242 mm)

590 Super M – page 4 of 6

 Boom and Dipper Lift Capacities are rated per SAE J31 and are 87% of the maximum
BACKHOE LIFT CAPACITIES hydraulic lift force available with the specified options.

Standard Backhoe Extendahoe®

Retracted Extended
Distance from Backhoe lift Distance from Backhoe lift Distance from Backhoe lift
Boom Lift swing pivot (m) capacity - lb (kg) swing pivot (m) capacity - lb (kg) swing pivot (m) capacity - lb (kg)
+18’ (5.48 m) ......................................................................................................................................................1,940 (880)
+16’ (4.87 m) ............................ 2,870 (1302) ...................................................................... 13’6” (4.11) ...... 2,200 (998)
+14’ (4.27 m) .... 9’9” (2.97) .... 3,590 (1628) ............10’8” (3.25) .... 3,310 (1501) .......... 15’5” (4.70) .... 2,300 (1043)
+12’ (3.66 m) .. 12’1” (3.69) .... 3,670 (1665) .......... 12’9” (3.89) .... 3,280 (1488) ........ 16’10” (5.13) .... 2,420 (1098)
+10’ (3.05 m) .. 13’8” (4.16) .... 3,670 (1665) .......... 14’2” (4.32) .... 3,410 (1547) ........ 17’11” (5.46) .... 2,370 (1075)
+8’ (2.44 m) .... 14’8” (4.47) .... 3,620 (1642) .......... 15’2” (4.62) .... 3,330 (1510) .......... 18’9” (5.72) .... 2,420 (1098)
+6’ (1.83 m) .... 15’3” (4.65) .... 3,550 (1610) ........ 15’11” (4.85) .... 3,390 (1538) .......... 19’3” (5.87) ... 2,420 (1098)
+4’ (1.22 m) .... 15’8” (4.77) .... 3,460 (1569) .......... 16’3” (4.96) .... 3,280 (1488) .......... 19’7” (5.97) ... 2,310 (1048)
+2’ (0.61 m) .. 15’10” (4.82) .... 3,370 (1529) .......... 16’4” (4.98) .... 3,210 (1456) .......... 19’8” (5.99) ... 2,290 (1039)
Ground Level .... 15’7” (4.75) .... 3,330 (1510) .......... 16’1” (4.91) .... 3,120 (1415) .......... 19’6”’ (5.94) .... 2,260 (1025)
-2’ (0.61 m)...... 15’1” (4.60) .... 3,250 (1474) .......... 15’8” (4.77) .... 3,010 (1365) .......... 19’2” (5.84)... 2,230 (1012)
-4’ (1.22 m)...... 14’4” (4.37) .... 3,110 (1411) ........ 14’11” (4.55) .... 2,950 (1338) .......... 18’6” (5.64) .... 2,220 (1007)
-6’ (1.83 m)...... 13’2” (4.01) .... 3,040 (1379) .......... 13’9” (4.19) .... 2,850 (1293) .......... 17’8” (5.38) ..... 2,140 (971)
-8’ (2.44 m) ...... 11’5” (3.48) .... 2,960 (1343) .......... 12’2” (3.71) .... 2,840 (1288) .......... 16’6” (5.03) ...... 2,110 (957)
-10’ (3.05 m)...... 8’9” (2.67) .... 2,960 (1343) .......... 9’10” (2.99) .... 2,810 (1275) ........ 14’10” (4.52) ...... 2,090 (948)
-12’ (3.66 m) .............................. 2,930 (1329) ............ 5’8” (1.72) .... 2,880 (1306) .......... 12’9” (3.89) ...... 2,180 (989)
-14’ (4.27 m) ............................................................................................................................ 9’9” (2.97) .... 2,240 (1016)
-15’ (4.57 m) ............................................................................................................................ 6’0” (1.83) .... 2,490 (1129)
Dipper Lift
+16’ (4.87 m) ........................................................................................................................ 12’10” (3.91) .... 2,810 (1275)
+14’ (4.27 m) .... 9’5” (2.87) .... 4,800 (2177) .......... 10’2” (3.10) .... 4,850 (2200) .......... 14’0” (4.27) .... 2,940 (1334)
+12’ (3.66 m) .. 10’7” (3.23) .... 5,290 (2399) .......... 11’2” (3.40) .... 5,310 (2409) .......... 14’7” (4.45) .... 3,080 (1397)
+10’ (3.05 m) .. 11’0” (3.35) .... 5,580 (2531) .......... 11’6” (3.50) .... 5,510 (2500) .......... 14’9” (4.50) .... 3,100 (1406)
+8’ (2.44 m) .... 10’7” (3.23) .... 5,750 (2608) .......... 11’2” (3.40) .... 5,720 (2595) .......... 14’8” (4.47) .... 3,150 (1429)
+6’ (1.83 m) ...... 9’4” (2.84) .... 5,630 (2554) .......... 10’1” (3.08) .... 5,740 (2604) .......... 14’0” (4.27) .... 3,190 (1447)
+4’ (1.22 m) ...... 6’0” (1.83) .... 6,490 (2944) ............ 7’4” (2.23) .... 6,590 (2989) .......... 12’9” (3.89) .... 3,290 (1492)

BACKHOE OPERATIONAL DATA

Standard Backhoe Extendahoe®
Retracted Extended
Digging depth –
Maximum ..................................... 15’11” (4.85 m).............................. 15’11” (4.85 m)......................... 19’11” (6.07 m)
Maximum w/hi-capacity bucket ... 16’4” (4.98 m) ................................... 16’4” (4.98 m).............................. 20’4” (6.20 m)
2’ (610 mm) flat bottom ............. 15’10” (4.83 m) ............................. 15’10” (4.83 m) ........................ 19’10” (6.05 m)
8’ (2.44 m) flat bottom................ 14’11” (4.55 m).............................. 14’11” (4.55 m) .......................... 19’2” (5.84 m)
Overall reach from –
Rear axle centerline...................... 23’3” (7.09 m) ............................... 23’3” (7.09 m) .......................... 27’2” (8.28 m)
Swing pivot ................................... 19’8” (5.99 m) ............................... 19’8” (5.99 m) .......................... 23’7” (7.19 m)
Loading height ................................. 11’5” (3.48 m)................................ 11’5” (3.48 m) .......................... 13’9” (4.19 m)
Loading reach – dipper retracted .... 9’6” (2.90 m) ................................. 9’6” (2.90 m) .......................... 12’9” (3.89 m)
Swing arc............................................................ 180° ................................................ 180° ........................................... 180°
Bucket rotation –
#1 position ...................................................... 164° ................................................ 164° ........................................... 164°
#2 position ...................................................... 200° ................................................ 190° ........................................... 190°
Stabilizer spread – operating.......... 11’1” (3.38 m)................................ 11’1” (3.38 m)........................... 11’1” (3.38 m)
Digging force –
Bucket cylinder ................. 14,718 lbf (65 469 N) .................... 14,718 lbf (65 469 N)............... 14,718 lbf (65 469 N)
Dipper cylinder................... 8,449 lbf (37 583 N) ...................... 8,449 lbf (37 583 N)................. 5,999 lbf (26 685 N)
w/bucket @ 50° w/bucket @ 50° w/bucket @ 51°
Leveling angle
maximum slope that backhoe
will make vertical cut ..................................... 12° .................................................. 12° ............................................. 12°
NOTE: Lift capacities apply straight to the rear of prime mover. Equipped with 24” (610 mm) Universal H.D. trenching bucket and Case
coupler except as noted.
590 Super M – page 5 of 6
STANDARD EQUIPMENT
OPERATOR’S COMPARTMENT LOADER HYDRAULICS
See page 2 See page 2 2-spool loader control valve
ENGINE BACKHOE 6-spool backhoe control valve
Case Family III 445T/M2 See page 2 Heavy-duty oil cooler
turbocharged diesel POWERTRAIN OTHER
Tier II certified 2WD Forward tilt engine hood
Integral crank driven balancer 4F/4R Power shuttle synchromesh Replaceable, molded front bumpers
Automatic fan belt tensioner transmission Front/rear tie downs
Viscous fan drive Torque converter Reflective logos
Integral engine oil cooling Transmission de-clutch Lights - Cab and Canopy
Fuel filter w/water trap Electro-hydraulic differential lock 2 Rear tail/stop
KKSB starter timing control Hydrostatic steering 2 Front flashers/turn
Dual element air cleaner Wet disc brakes 2 Rear flashers/turn
with integral pre-cleaner Remote lube front axle pivot 4 Front & 4 rear adjustable
90 amp alternator halogen lights (55 w)
850 CCA 12-volt battery
Heavy-duty radiator w/deaeration
bottle
Non-spark-arresting muffler
OPTIONAL EQUIPMENT
OPERATOR’S COMPARTMENT Canopy Convenience Package ENGINE
Cab with – Front windshield w/wiper & Cold weather grid heater starting aid
Heater washer Dual, 12-volt, 600CCA batteries
Defroster 85 dB(A) sound Exhaust aspirated air cleaner
Dome light Floor mat POWERTRAIN
Wipers, front and rear Sun visor 4WD w/outboard planetary drive,
Tinted glass LOADER on-the-go push-button activation
Floor mat Hydraulic attachment coupler and 14 x 17.5 front tires
Side window partial hold open Attachment auxiliary hydraulics Powershift transmission with
Inside release for side windows Buckets (see page 2) Autoshift (4WD unit only)
Operator Convenience Package
Tilt wheel BACKHOE HYDRAULICS
Windshield washer w/adjust- Case hydraulic coupler Auxiliary backhoe uni-directional
able nozzles (front & rear) Buckets (see page 2) hydraulics
Sun visor Extendahoe® Auxiliary backhoe bi-directional
Deluxe Cab Package Two-lever control hydraulics
Operator Convenience Package Pilot Operated Control System Hand lever operated for manual
PLUS Fingertip Proportional controls
Vinyl-covered interior Electrohydraulic stabilizer controls. Button operated for pilot controls
Radio-ready kit w/antenna and Thumb operated Proportional OTHER
speakers Electrohydraulic Extendahoe Outside breakaway mirror
Reduced sound level to 72 dB(A) control Rear fender extension
Vinyl or cloth-covered mechanical Thumb operated horn button Tool box
suspension seat Thumb operated Auxiliary Special paint
Air Ride suspension seat Hydraulic Control
3” (76 mm) retractable seat belt Infinitely Adjustable Towers
Cab air-conditioning, 100% filtered In-Cab Switchable “Excavator to
air, in-cab filter access, 8 Backhoe” control pattern change
adjustable roof vents, 2 floor Stabilizer pads
vents, w/heater Flip-over
Ride Control Rubber pad
Cab right door Front counterweights
440 lb (200 kg)
900 lb (408 kg)
NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices,
where applicable.
NOTE: All engines meet current EPA emissions requirements.
IMPORTANT: CNH America LLC reserves the right to change these specifications without notice and
without incurring any obligation relating to such change. CNH America LLC does not warrant the
safety or reliability of attachments from other manufacturers.
Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods
www.casece.com
and/or services of companies other than CNH America LLC, are the property of those respective companies.

Form No. CCE4070439 Printed in U.S.A. © 2004 CNH America LLC

Replaces Form No. CCE9030305 All Rights Reserved