A B C D E F G

PRE-CONSTRUCTION CONSULTANCY SERVICES (INCLUDING TEFR, DETAILED

1 Name of Project: ENGINEERING AND BID PROCESS MANAGEMENT) FOR PROPOSED PUBLIC
TRANSPORT INITIATIVES OF TMC.
2 Date: 20-11-2015
3 ABSTRACT SHEET
4 Ref.DSR Sr. No. Description Unit Quantity Rate Amount
5 1 SECTION 1 : Survey and Soil Investigation
Detailed/final location survey of road alignment with chain and
Thane DSR compass, levels, theodolite and other essential instrument including
2015-16 Item staking of final centre line, locating curves, establishing Bench
6 1.01 Marks and taking longitudinal section, cross section, fly leveling etc. Km 0.10 2929.5 305
No:-5 Page
No:-233 complete (in plain area.)

7
Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300
mm, removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable material to be
8 R.A. 1 1.02 used or auctioned, up to a lead of 1000 meters including removal and Hector 0.18 84982 15025
disposal of top organic soil not exceeding 150 mm in thickness.
Ref.:- MORT&H Cl.201

9
Preparation of land plans of road (New alignment) with fixing
boundaries on both sides of centre line of Road / Existing road up to
road boundary, including carrying out detailed plain table survey
Thane DSR along the centre line of the road, showing details of permanent /
2015-16 Item semi- permanent structures, trees, telephone-lines, pipe-lines, field-
10 1.03 Km 0.10 7788.9 810.0456
No:-3 Page bunds, cross-roads up to 100m or as directed, plotting work of
No:-238 surveyed area etc. complete.

11
Providing '7' copies of computer printouts of plans duly bound in
Thane DSR the form of booklet.
2015-16 Item
12 1.04 Job 0.10 4943.4 514.1136
No:-6 Page
No:-238

13

Thane DSR
Providing and fixing chainage, apexes, Bench Mark stone of size
2015-16 Item
14 1.05 17 x 22 x 60 cm.in cement concrete 1:4:8 block of size 45 x 45 x 60 Km 0.21 633.15 131.6952
No:-13 Page
cm. including excavation, conveyance etc. complete.
No:-235

15

Breaking and Removing the existing c.c pavement to full width,

depth including breaking are removing & disposing off or in to 5 cm
16 R.A. 2 1.06 to 7.5 cm size, spreading the layer if required & disposing off cum #REF! 2310 #REF!
unserviceable material as directed including all lift and lead etc.
complete.
17
Taking trial bores for detailed investigations with 150 diameter
boring in overburden, hard murum, boulders including all materials
such as temporary casing pipes & accessories, grease, steel balls, drill
rods, core lifter, reaming shells, core barrels, diamonds drills, air
houses, water swivels etc. and other such materials as required,
Thane DSR including conveying such materials and machinery to site of works.
18 2015-16 Page 1.07 collected and preserving the loose samples in glass or plastic jar,
No:-229/230 collection and preservation of undisturbed samples, water samples,
wash samples as directed at site of work and conveying the same to
the head quarter of concerned office as directed etc. complete.

19 Item No:-1 a. Soil RM ### 2369 #VALUE!

20 Item No:-3 b. Hard Rock RM ### 4103 #VALUE!
21

1
 A B C D E F G
PRE-CONSTRUCTION CONSULTANCY SERVICES (INCLUDING TEFR, DETAILED
1 Name of Project: ENGINEERING AND BID PROCESS MANAGEMENT) FOR PROPOSED PUBLIC
TRANSPORT INITIATIVES OF TMC.
2 Date: 20-11-2015
3 ABSTRACT SHEET
4 Ref.DSR Sr. No. Description Unit Quantity Rate Amount

Thane DSR
Providing tuntappa box of jungle wood of size 1.25m x 0.35m x
2015-16 Item
22 1.08 0.15m size for preserving core samples with all fixtures and fastening No 2 2919 5838
No:-5 Page
and conveying to the site office or to the head quarters as directed.
No:-230

23

Carrying out soil lab tests as specified on undisturbed and disturbed

Thane DSR
soil samples for characterization of soil profile at site laboratory &
24 2015-16 Page 1.09
submission of laboratory observation sheet, graphs etc. as per IS
No:-231/232
2720 (latest version) as directed by Engineer in charge.

Item No:-
25 1) Natural moisture content (NMC) of soils by oven drying method. No 2 256 512.4
10(1)
Item No:-
26 2) Wet and Dry Density No 2 256 512.4
10(2)
Item No:-
27 3) Sieve Analysis No 2 508 1016.4
10(6)
Item No:-
28 4) Liquid & Plastic limits No 2 381 762
10(8)
Item No:-
29 5) Shrinkage limits No 2 381 762
10(9)
Item No:-
30 6) Specific gravity No 2 508 1016.4
10(10)
31
Conducting standard penetration test on soil, sand
Thane DSR by split spoon sample for150 diameter bore hole including labour &
2015-16 Item material etc. complete. (Equipment and materials is to be supplied by
32 1.10 No 4 626 2503
No:-9 Page Department free of cost).
No:-231

33
Collecting disturbed samples of soil from bore holes as per
34 BW-1-07-a 1.11 specifications and delivering the same to the testing laboratory No 2 300 600
anywhere as directed etc. complete as specified and directed.
35
Installation of a steel portable barricade with horizontal rail 300
mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x 5
mm angle iron section, 1.5 m in height, horizontal rail painted (2
36 R.A. 4 1.12 coats) with yellow and white stripes, 150 mm in width at an angle of Rmt 69 3121 214308.7
450, 'A' frame painted with 2 coats of yellow paint, complete as per
IRC:SP:55-2001

37
Providing traffic wardens for regulation of traffic during
MSRDC/200 person/
38 1.13 construction as per requirement of traffic police & as directed by 515 0
5/2.2/pg.4 day
engineers
39
40 R.A. 6 1.14 Providing cones, studs, painted drums plastic channelize. Nos. 7 894 6139
41

Market Supplying Hydraulic excavator machinery during construction

42 1.15 Hrs. 412 0
Enquiry Rate period.

43
MSRDC Providing & fixing cats eye/tiger eyes at 10.0m center to center
SOR along the center and or edge of the flyover and the ramp portion and
44 1.16 on other edge of the slip road as per specification and as directed by Nos. 7 859 5899
2005/6.13.9/
Pg37 the engineer.

45 Total Of Section 1 #VALUE!

46
47 2 SECTION: FOUNDATION

2
 A B C D E F G
PRE-CONSTRUCTION CONSULTANCY SERVICES (INCLUDING TEFR, DETAILED
1 Name of Project: ENGINEERING AND BID PROCESS MANAGEMENT) FOR PROPOSED PUBLIC
TRANSPORT INITIATIVES OF TMC.
2 Date: 20-11-2015
3 ABSTRACT SHEET
4 Ref.DSR Sr. No. Description Unit Quantity Rate Amount
48
Empty boring through over burden including road crust up to the
49 BW-2-28-o 2.01 bottom of pile cap for all diameters of piles. Rmt

50 1200mm Dia #REF! 1,806 #REF!

51

Providing and installing in position controlled concrete of grade M-

40 with minimum cement content as 400 kg/cum. and W.C ratio not
exceeding 0.40 for R.C.C work in cast-in-situ bored piles with
hydraulic boring machine including mobilization to the site of
52 R.A.44a 2.02 work. Each pile shall have load capacity as per design and of specific
diameter using maximum 20mm size of aggregate including boring
through all strata including rock, including placing of concrete by
termite arrangement through mild steel casing to the required depth.
Compaction as necessary with drawl of mild steel casing including
chipping/dressing of piles to required levels, cleaning the
reinforcement etc. complete as specified and directed (Excluding
reinforcement)
53 1200mm dia Rmt #REF! 10,898 #REF!
54
Providing, placing and driving in position 6 mm thick permanent
M.S. Liner up to required depth with 12 mm thick M.S. cutting edge
Thane DSR of 0.5 meter length of bottom including fabricating, cutting the M.S.
2015-16 Item sheet to required diameter and shape, welding the joints and driving
55 2.03 MT #REF! 75,868 #REF!
No:-29 Page with the help of required machineries including all materials, labour
No:-198 and lift etc. complete.

56
Excavation for foundation----------- including shoring and strutting
as necessary and disposing off excavated stuff excluding dewatering
57 2.04 Cum
if separately provided, as directed etc. complete (for depth up to 1.50
M.)
58 R.A. 8 i) earth, soil of all types, sand gravel #REF! 512 #REF!
59 R.A. 9 ii) Hard murum & boulder #REF! 639 #REF!
60
Providing and laying in situ M-20 cement concrete of
trap/granite/quartzite/gneiss metal in foundation including necessary
61 R.A.11 2.05 bailing out water, compaction and curing (using concrete mixer) Cum #REF! 8,435 #REF!
including form work Spec. No. BR-5 Page No.105 & MoRT&H Cl.
1500, 1700 & 2100

62
Providing and laying in situ M-40 RCC in open foundation, piles
caps bed block below Reinforced soil wall using stone metal,
blenching of natural and cursed sand OPC 53 grade, fly ash (max
20%) admixture including necessary dewatering, formwork to
achieve F2 finish, centering mixing in mechanized automatic batch
mix plant transporting, compacting including curing by sprinkling /
63 R.A.45 2.06 Cum #REF! 8,848 #REF!
ponding of water and finishing as directed including all leads, lift etc.
complete as per approved drawing and as per sp. and as directed by
engineer. (excluding steel reinforcement) (Ready mix Concrete only).

64
Providing and cutting bending, hooking, laying in position and tying
65 R.A.12 2.07 HYSD bars for reinforcement in Foundation as per detailed drawings MT #REF! 78,505 #REF!
for R.C.C. work.
66

3
 A B C D E F G
PRE-CONSTRUCTION CONSULTANCY SERVICES (INCLUDING TEFR, DETAILED
1 Name of Project: ENGINEERING AND BID PROCESS MANAGEMENT) FOR PROPOSED PUBLIC
TRANSPORT INITIATIVES OF TMC.
2 Date: 20-11-2015
3 ABSTRACT SHEET
4 Ref.DSR Sr. No. Description Unit Quantity Rate Amount

Providing fusion bounded epoxy to reinforcing bars as per IS 3620

- 1933 specifications for a thickness of 175 +/- 50 microns including
testing of coating at plant, extra cost for careful handling using PVC
Thane DSR coating binding wires, instead of GI Wire touching up the material
2015-16 Item supplied repair work etc. complete as per detailed specification,
67 2.08 MT #REF! 14716 #REF!
No:-73 Page (Lead up to 340Km to & fro from plant) for all diameters
No:-217 Ref.:- MoRT&H
Cl.1600

68
Pile load test on single vertical pile in accordance with I.S. 2911 part
69 R.A.7 2.09 MT
IV.
70 a) Initial test and routine load test. 300 0
71
Carrying out Plate Load Test complete with necessary and adequate
Kent ledge loads, equipments and instruments etc. as per
72 BW-1-18 2.10 specifications for determination of bearing capacity of soil etc. No. 75,000 0.0
complete as specified and directed and submitting reports in
duplicate.

73
Carrying out Dynamic load test at 2.50 times the design load on any
dia. Of pile including all preparations for conducting test by
74 2.11 precasting required C.C hammer head and all machineries, labour etc. No.
including submitting report with graphs and interpretations complete
(excluding cost of pile).

75 BW-5-6-k a) On first Pile 45,000 0

76 BW-5-6-l b) Subsequent Pile 25,000 0.00
77

Conducting low strain pile integrity test on RCC Bored Cast In Situ
piles using pile integrity tester equipment manufactured by pile
78 BW-5-7-d 2.12 dynamic Test. of USA or TNO of Netherlands or equivalent that No. #REF! 500 #REF!
confirms to ASTM D5882 and submitting reports in quadruplicate
appointing expert etc. complete.
79
Providing and applying one coat of epoxy primer and two coats of
coal tar epoxy paint (Total DFT = 50 + 80 + 80 = 210 microns) to
all concrete surfaces in contact with earth in foundation and
Thane DSR substructure including all cost of material, labour, transportation and
2015-16 Item preparing the surfaces by cleaning, washing, brushing, sand / grit
80 2.13 Sqm #REF! 341 #REF!
No:-75 Page blasting etc. complete as directed by Engineer and as per
No:-218 Specifications. (Paint shall be got approved from Engineer and /or
tested from approved laboratory).

81 Total Of Section 2 #REF!

82
83 3 SECTION 3: SUBSTRUCTURE
84
Providing and laying in situ cement concrete of M-40 trap / granite /
quartzite / gneiss metal for R.C.C. piers with vertical and horizontal
diaphragram having neat and smooth finish, centering, shuttering,
scaffolding compaction by vibrating and curing complete. Height. up
85 R.A. 47 3.01 to 5.00mtr. (excluding reinforcement) Note: i) Add 2% for over Cum #REF! #REF! #REF!
5.00mtr. height increase up to 10.00mtr. ii) add 6% for height above
10.00mtr. (height for that particular structure )

86
Providing and cutting bending, hooking, laying in position and tying
87 R.A. 13 3.02 HYSD bars for reinforcement in substructure as per detailed MT #REF! 46,426 #REF!
drawings for R.C.C. work.
88

4
 A B C D E F G
PRE-CONSTRUCTION CONSULTANCY SERVICES (INCLUDING TEFR, DETAILED
1 Name of Project: ENGINEERING AND BID PROCESS MANAGEMENT) FOR PROPOSED PUBLIC
TRANSPORT INITIATIVES OF TMC.
2 Date: 20-11-2015
3 ABSTRACT SHEET
4 Ref.DSR Sr. No. Description Unit Quantity Rate Amount

Providing fusion bounded epoxy to reinforcing bars as per IS 3620

- 1933 specifications for a thickness of 175 +/- 50 microns including
testing of coating at plant, extra cost for careful handling using PVC
Thane DSR coating binding wires, instead of GI Wire touching up the material
2015-16 Item supplied repair work etc. complete as per detailed specification,
89 3.03 MT #REF! 14,716 #REF!
No:-73 Page (Lead up to 340Km to & fro from plant) for all diameters
No:-217 Ref.:- MoRT&H Cl.1600

90
Providing and applying anticarbonation Acrylic Paint in two coats
over required coat of primer to the exposed superstructure concrete
91 BW-5-7-c 3.04 surfaces of girder and slab soffits/sides including cleaning and Sqm ### 234.00 #VALUE!
surface preparation, equipment, labors etc. complete.

92 Total Of Section 3 #VALUE!

93
94 4 SECTION 4:SUPERSTRUCTURE
95
4.01 Providing and casting special grade M-40 in controlled cement
concrete of specified strength for prestressed concrete work for solid
slab superstrucure including slab over I-girder etc. including
centering & scaffolding or launching including necessary plant and
machinery for the job shuttering, vibrating, curing, finishing etc
complete. Height up to 5 meter. (excluding reinforcement)
96 R.A. 48 Note: i) add 20% up to 5.00 m. height ii) add 25% for height 5.00m. Cum #REF! 8,354 #REF!
to 10 m. iii) add 30% for height above 10.00 m. iv) add 30% on basic
rate for span 30 m. to 50 m. for creek bridge. v) add 75% on basic
rate for span 50 m. & above for creek bridge.

97
98
4.02 Providing and cutting bending, hooking, laying in position and tying
99 R.A. 14 HYSD bars for reinforcement as per detailed drawings for R.C.C.
work.
100 Box and I Girder with Slab MT 14 80,774 1114681.2
101
Providing fusion bounded epoxy to reinforcing bars as per IS 3620
- 1933 specifications for a thickness of 175 +/- 50 microns including
testing of coating at plant, extra cost for careful handling using PVC
Thane DSR coating binding wires, instead of GI Wire touching up the material
2015-16 Item supplied repair work etc. complete as per detailed specification,
102 4.03 MT 13.80 14,715.75 203077.35
No:-73 Page (Lead up to 340Km to & fro from plant) for all diameters
No:-217 Ref.:- MoRT&H Cl.1600

103
Steel superstructure: Providing structural steel work of 100%
metalizing steel work in trusses, other similar trussed purlins and
members with all bracing, gusset plates etc. as per detailed design
and drawings or as directed by Engineer-In-Charge, including
104 Market rate 4.04 cutting, fabricating, hoisting, erecting fixing in position, making MT 0.00 154000 0.00
riveted/ bolted/welded connection and one coat of anticorrosive paint
and over it two coats of oil painting of approved quality and shade
etc. complete.

105

5
 A B C D E F G
PRE-CONSTRUCTION CONSULTANCY SERVICES (INCLUDING TEFR, DETAILED
1 Name of Project: ENGINEERING AND BID PROCESS MANAGEMENT) FOR PROPOSED PUBLIC
TRANSPORT INITIATIVES OF TMC.
2 Date: 20-11-2015
3 ABSTRACT SHEET
4 Ref.DSR Sr. No. Description Unit Quantity Rate Amount

Thane DSR: Heat sealed waterproof membrane not less than 4 mm thick, as per
-2012-2013 approval to be accorded by the Engineer.
106 BR/Item 4.05 Sqm #REF! 400 #REF!
No:-50
Pgno:-171
107
108 Total Of Section 4 #REF!
109
110 5 SECTION 5: FIXED ITEMS
Drainage Spouts complete as per drawing and Technical
111 R.A.34 5.01 Nos. 20.70 1786 36970.20
specification
112
Provision of an Reinforced cement concrete crash barrier at the
edges of the road, approaches to bridge structures and medians,
constructed with M-40 grade concrete with HYSD reinforcement
conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at
expansion joints filled with pre-molded asphalt filler board, keyed to
the structure on which it is built and installed as per design given in
113 R.A.57 5.02 the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III Rm 103.50 5012.00 518742.00
dated 24 June 1994 as per dimensions in the approved drawing and at
locations directed by the Engineer, all as specified

114
Supplying, fitting and fixing in position true to line and level POT-
PTFE bearing consisting of a metal piston supported by a disc or
unreinforced elastomeric confined within a metal cylinder, sealing
rings, dust seals, PTFE surface sliding against stainless steel mating
surface, complete assembly to be of cast steel / fabricated structural
steel, metal and elastomeric elements to be as per IRC: 83 part-I & II
115 R.A.20 5.03 respectively and other parts conforming to BS: 5400, section 9.1 & MT 1200 267 320400
9.2 and clause 2006 of MoRTH Specifications complete as per
drawing and approved Technical Specifications.
Ref.:- MORT&H Spec. Cl. 2000 & 2200

116
Providing and fixing modular type expansion joint material
inclusive of German imported edge beams and elastomeric strip seal
along with indigenous fabricated anchorage system for fixing the
117 R.A. 24 5.04 Rmt 24 #REF! #REF!
deck for movement of +/- 35 mm (total 60 mm) as per MORT&H
specification under supervision of specialized

118
Providing and applying hot applied thermoplastic road marking
material with glass beads extremely high skid resistance 2.5 mm
thick without primer coat (Tack coat) on Asphalt road surface. All
labour, materials, with special aggregates as specified in B.S. part - l
& all 1989 and carrying out the marking on any road in center line
and other marking continuous or intermittent 10cm. or 15cm width
119 5.05 also pedestrians crossing strips as well as spraying further quantity of Sqm
glass beads of type all uniformly into a mono layer on to the hot paint
line in quick succession of the paint spraying operation @ 250 gms
per Sqm. area as directed and as per BS/ MOST specifications in
white/yellow color.

120 R.A. 22 With hot applied thermoplastic paint for yellow Sqm #REF! 789 #REF!
121 R.A. 22 With hot applied thermoplastic paint for white Sqm #REF! 789 #REF!
122

6
 A B C D E F G
PRE-CONSTRUCTION CONSULTANCY SERVICES (INCLUDING TEFR, DETAILED
1 Name of Project: ENGINEERING AND BID PROCESS MANAGEMENT) FOR PROPOSED PUBLIC
TRANSPORT INITIATIVES OF TMC.
2 Date: 20-11-2015
3 ABSTRACT SHEET
4 Ref.DSR Sr. No. Description Unit Quantity Rate Amount

Providing and applying TACK COAT with BITUMEN EMULSION

using emulsion pressure distributor on granular surface at the rate of
123 R.A. 30 5.06 3.5 kg/10 Sqm on the prepared bituminous/granular surface cleaned Sqm 1,138.50 9.00 10246.50
with mechanical broom.

124

Providing and laying not mix hot laid Dense Bituminous Macadam
Polymer Modifying Bitumen grade 40 with 4.25% bitumen content
by weight of total mix on prepared surface with specified graded
crusher aggregates for the base/ binding course including loading of
aggregates with F.E. Loader, heating of stone aggregates and bitumen
125 R.A. 31 5.07 Cum 56.93 4,733 269426.025
and mixing in modern drum mix type of hot mix plant transporting
the hot mix to work site laying the mixed material with sensor paver
finisher to the required grade, level and camber, rolling by power
roller and vibratory roller to achieve the desired density
Ref.:- MORT&H Spec. Cl. 4th Rev. 507

126
Providing and laying 25 mm thick Polymer Modifying Bituminous
concrete with 40-60 batch type HMP producing an average output of
50 tones per hour using crushed aggregates of specified grading
premixed with bituminous binder at 6.5% by weight of total mix and
filler incl. Providing anti-stripping agent.@ 0.50% of bitumen
content of, transporting the hot mix to work site with all leads and
applying a tack coat @3.75 kg/10sqm with hot bitumen of 80/100
127 R.A. 33 5.08 and laying with hydrostatic/hydraulic power finisher with sensor Cum 0.00 1,015 0
control to the required grade, level and alignment, rolling with
smooth wheeled, vibratory or tandem rollers to achieve the desired
compaction as per MoRT&H specifications clause 509 and 503.

128 Total Of Section 5 #REF!

129
130 7 SECTION 7 : MISCELLANEOUS ITEMS
131
Providing and laying in situ RCCM- 40 of trap/granite / quartzite /
gniess metal for reinforced cement concrete well / pile caps including
132 R.A. 46 7.01 necessary formwork compaction by vibrating finishing and curing Cum 9,294.00 0
etc. complete. (Excluding reinforcement)

Providing and applying 30 to 40mm thick external sand faced rough

cast cement plaster up to 10m from ground level and at all locations
in cement mortar 1:4 in two coats for masonry (except stone
masonry) and concrete surfaces including, providing water proofing
compound to the first coat of plaster as per manufacturers
133 R.A.38 0.01 specification , racking out joints, hacking of concrete surface, Cum 10,396.00 0
providing bands, drip moulds, grooves etc. finishing, curing,
scaffolding etc complete as directed By Engineer In Charge.

134 Total Of Section 5 0.00

135
136 Total cost = #REF!
137 Area 1242
138 Unit Cost #REF!
139

7
 THANE MUNICIPAL CORPORATION

Name of DRG. NO -
Project: DESIGN & CONSTRUCTION OF SOUTH BOUND FLYOVER AT THE JUNCTION OF ANDHERI-GHATKOPAR LINK ROAD ON EASTERN MMRDA-/MJ-
Date: EXPRESS HIGHWAY (EEH), MUMBAI BRIDGE/GAD/10
0/R0
08/12/2017
MEASUREMENT SHEET
Flyover : Chainage CH - 108.676 to CH -760.948
Solid Approach to Thane - CH - 108.676 to CH - 255.560 = 146.88 146.88
Via Duct - CH - 255.560 to CH - 655.560 = 400 400.00
Solid Approach to Mumbai - CH - 655.560 to CH - 760.948 = 105.388 105.388
TOTAL LENGTH =652.272 652.272
652.27

TOTAL VIA DUCT 400.00

TOTAL SOLID APPROACH 252.27
Description Of the Item
Sr. No. Unit No. L B D Qty.
1.00 SECTION 1 : Survey and Soil Investigation

Total station survey of existing compound area showing existing plot

boundary, structure, electric pole, manhole, chamber, trees location details
1.01 adjoining roads etc. Sqm. 1 652 27.5 17937

Spot level/contour survey at 5 mtr. X 5 mtr grid w.r.t. GTS datum level or
1.02 temporary bench mark Sqm. 1 652 27.5 17937

Clearing and grubbing road land including uprooting rank vegetation,

grass, bushes shrubs, sapling and trees of girth up to 300mm, removal of
stumps of trees cut earlier and disposal of unserviceable material and
stacking of serviceable material to be used or auctioned up to a lead 100
1.03 meters including removal and disposal of top organic soil not exceeding 150 Hector
mm in thickness.

Flyover 1 652.27 17.00 1.11

Preparation of land plans of road ( New alignment) with fixing

boundaries on both sides of centre line of Road / Existing road up to road
boundary, including carrying out detailed plain table survey along the centre
line of the road, showing details of permanent / semi- permanent structures,
1.04 trees, telephone-lines, pipe-lines, field-bunds, cross-roads up to 100m or as Km 0.65 0.65
directed, plotting work of surveyed area etc. complete.

Providing '7' copies of computer printouts of plans duly bound in the

1.05 form of booklet. Km 0.65 0.65

Providing and fixing chainage, apexes, Bench Mark stone of size 17 x 22 x

1.06 60 cm. in cement concrete 1:4:8 block of size 45 x 45 x 60 cm. including No. 5.22 5.22
excavation, conveyance etc. complete.

Dismantling of cement concrete pavement by mechanical means using

pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and
stock piling at designated locations and disposal of dismantled materials up
1.07 to a lead of 1000 metres, stacking serviceable and unserviceable materials Cum
separately ( For layers PQC & DLC)

Breaking and Removing the existing c.c pavement

For Piers A1 to P9 ( 12.00 mtr C/w) (4 pile group) 10 8.60 6.10 0.45 236.07
Obligatory span P10 to P11 (6 pile group) 2 11.60 5.60 0.45 58.46
For Piers P12 to A2 ( 12.00 mtr C/w) (4 pile group) 10 8.60 6.10 0.45 236.07
22 Total 530.60

Taking trial bores for detailed investigations with 150 diameter boring in
overburden, hard murum, boulders including all materials such as
temporary casing pipes & accessories, grease, steel balls, drill rods, core
lifter, reaming shells, core barrels, diamonds drills, air houses, water swivels
etc. and other such materials as required, including conveying such
materials and machinery to site of works. collected and preserving the loose
1.08 samples in glass or plastic jar, collection and preservation of undisturbed
samples, water samples, wash samples as directed at site of work and
conveying the same to the head quarter of concerned office as directed etc.
complete.

a. Soil, murum etc. soft strata Rmt 22 3.60 79.20

b. Hard Rock Rmt 22 6.90 151.80
c. Soft Rock Rmt 22 7.50 165.00

Providing tuntappa core box of jungle wood of size 1.25m x 0.55m x 0.15m
1.09 size for preserving core samples with all fixtures and fastening, handled, No 22 22.00
locking arrangement etc. complete

Carrying out various tests on sub soil & rock samples as specified on
undisturbed and disturbed soil samples for characterization of soil profile at
1.10 site laboratory & submission of laboratory observation sheet, graphs etc. as
per IS 2720 (latest version) as directed by Engineer in charge.

1) Natural moisture content (NMC) of soils by oven drying method. No 22 22.00

2) Wet and Dry Density No 22 22.00
3) Sieve Analysis No 22 22.00
4) Liquid & Plastic limits No 22 22.00
5) Shrinkage limits No 22 22.00
6) Specific gravity No 22 22.00

Page 8 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.

Conducting standard penetration test on soil, sand by split spoon sample

for150 diameter bore hole including labour & material etc. complete.
1.11 (Equipment and materials is to be supplied by Department free of cost). No 22 22.00

Collecting disturbed samples of soil from bore holes as per specifications

1.12 and delivering the same to the testing laboratory anywhere as directed etc. No 22 22.00
complete as specified and directed.

Installation of a steel portable barricade with horizontal rail 300 mm

wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x 5 mm angle
iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow
1.13 and white stripes, 150 mm in width at an angle of 450, 'A' frame painted with Rmt 2 217.42 434.85
2 coats of yellow paint, complete as per IRC:SP:55-2001

2.00 SECTION 2 : FOUNDATION

Bored cast-in-situ M40 grade R.C.C. Pile excluding Reinforcement complete

2.01 as per Drawing and Technical Specifications and removal of excavated earth Rmt
with all lifts and lead upto 1000 m.
Main Flyover 1000mm dia.
For Piers A1 to P9 ( 12.00 mtr C/w) (4 pile group) 60 8.92 535.2
Obligatory span P10 to P11 (6 pile group) 16 8.92 142.72
For Piers P12 to A2 ( 12.00 mtr C/w) (4 pile group) 60 8.92 535.2

136 Total 1,213.12

1000mm dia. Cum 1,213.12 0.79 952.30

Providing, placing and driving in position 6 mm thick permanent M.S. Liner

up to required depth with 12 mm thick M.S. cutting edge of 0.5 meter length
of bottom including fabricating, cutting the M.S. sheet to required diameter
2.02 and shape, welding the joints and driving with the help of required
machineries including all materials, labour and lift etc. complete.

6 mm thick permanent M. S. Liner No perimeter

1000mm dia. MT 136 5.92 3.14 0.047 119.07
Total 119.07

Earth work in excavation of foundation of structures as per drawing and

technical specification, including setting out, construction of shoring and
bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom, backfilling the excavation earth to the extent required and
2.03 utilising the remaining earth locally for road work including cost for Cum
disposing off at lead of 10 Km

I Earth, soil of all types, sand gravel

For Piers A1 to P9 ( 12.00 mtr C/w) (4 pile group) 10.00 7.60 5.10 1.7 639.54
Obligatory span P10 to P11 (6 pile group) 2.00 10.60 4.60 1.7 160.91
For Piers P12 to A2 ( 12.00 mtr C/w) (4 pile group) 10.00 7.60 5.10 1.7 639.54

22 Total 1439.99

Plain/Reinforced Cement Concrete in Open Foundation complete as per

2.04 Drawing and Technical Specifications. Cum

M-20 PCC below pile caps

For Piers A1 to P9 ( 12.00 mtr C/w) (4 pile group) 10.00 7.60 5.10 0.1 38.76
Obligatory span P10 to P11 (6 pile group) 2.00 10.60 4.60 0.1 9.75
For Piers P12 to A2 ( 12.00 mtr C/w) (4 pile group) 10.00 7.60 5.10 0.1 38.76
Total 87.27

Plain/Reinforced Cement Concrete in Open Foundation (Pilecaps ) complete

2.05 as per Drawing and Technical Specifications. Cum

Pile caps M40 grade concrete

For Piers A1 to P9 ( 12.00 mtr C/w) (4 pile group) 10.00 7.30 4.80 1.5 525.60
Obligatory span P10 to P11 (6 pile group) 2.00 10.30 4.30 1.5 132.87
For Piers P12 to A2 ( 12.00 mtr C/w) (4 pile group) 10.00 7.30 4.80 1.5 525.60
22 Total 1,184.07

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

2.06 Foundation complete as per Drawing and Technical Specifications. MT

i) Pile (175 Kg/cum) MT 1 952 0.175 166.65

ii) Pile cap (95 Kg/cum) MT 1 1,184 0.095 112.49
Total 279.14

Providing fusion bounded epoxy to reinforcing bars as per IS 3620 - 1933

specifications for a thickness of 175 +/- 50 microns including testing of
coating at plant, extra cost for careful handling using PVC coating binding
wires, instead of GI Wire touching up the material supplied repair work etc.
2.07 complete as per detailed specification, (Lead up to 340Km to & fro from MT 279.14 279.14
plant) for all diameters. Ref.:-
MoRT&H Cl.1600

Page 9 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
Pile load test on single vertical pile in accordance with I.S. 2911 part IV. Design Pile Test Pile
2.08 MT Load Load
a) Initial test and routine load test. As per Morth-clause.1113.3 pg 471 MT 4 300MT 450.00 1800

Carrying out Plate Load Test complete with necessary and adequate Kent
ledge loads, equipments and instruments etc. as per specifications for
2.09 determination of bearing capacity of soil etc. complete as specified and No 1 1.00
directed and submitting reports in duplicate.

Page 10 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
Carrying out Dynamic load test at 2.50 times the design load on any dia. of
pile including all preparations for conducting test by precasting required C.C
2.10 hammer head and all machineries, labour etc. including submitting report No
with graphs and interpretations complete (excluding cost of pile).

a) On first Pile No 1 1.00

b) Subsequent Pile No 1 1.00

Conducting low strain pile integrity test on RCC Bored Cast In Situ piles
using pile integrity tester equipment manufactured by pile dynamic Test. of
USA or TNO of Netherlands or equivalent that confirms to ASTM D5882 and
2.11 submitting reports in quadruplicate appointing expert etc. complete. No 3 3.00

3.00 SECTION 3 : SUBSTRUCTURE

Plain/Reinforced cement concrete in sub-structure complete as per drawing

3.01 and Technical Specifications (with provision of architectural beautification) Cum

RCC M-40 grade for Pier and Piercaps

Main Flyover
Piers with PSC I Girder
For Piers A1 to P9, , P12-A2 ( 12.00 mtr C/w)
Pier 20 1.80 1.00 2.35 84.62
Pier P10-P11 2 1.80 1.40 2.35 11.85
Pier cap Top & Flaring portion (Obligatory span) 2 13.68 2.00 54.70
Pier cap Top & Flaring portion 18 13.68 1.20 295.40
Pier cap Top & Flaring portion (For Expansion Joints) 2 13.68 2.10 57.44
Pedestal A1 to P9, P12-A2 104 0.80 0.80 0.50 33.28
Dirt wall A1 2 10.80 0.30 1.95 12.64

Total 549.93

Pier 96.47 cum

Pier cap 407.54 cum
Pedestal 33.28 cum
Dirt wall 12.64 cum

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

3.02 Substructure complete as per Drawing and Technical Specifications. MT

For Pier (195 Kg/cum) MT 96 195 kg/Cum 18.81

For Pier cap and Pedestal, Dirt wall (160 Kg/cum) 453 160 kg/Cum 72.55
Total 91.36

Providing fusion bounded epoxy to reinforcing bars as per IS 3620 - 1933

specifications for a thickness of 175 +/- 50 microns including testing of
coating at plant, extra cost for careful handling using PVC coating binding
wires, instead of GI Wire touching up the material supplied repair work etc.
3.03 complete as per detailed specification, (Lead up to 340Km to & fro from MT 91 91.36
plant) for all diameters Ref.:- MoRT&H Cl.1600

Providing and applying anticarbonation Acrylic Paint in two coats over

required coat of primer to the exposed superstructure concrete surfaces of
3.04 girder and slab soffits/sides including cleaning and surface preparation, Sqm
equipment, labors etc. complete.

A. Anticarbonation Acrylic Paint to the external surfaces

For Piers A1to P3 , P6 to P17 & P19 to P38 ( 12.00 mtr C/w) (4 pile group)
Pier P1& P3 22 5.6 2.35 289.59
Pier cap Top portion 22 10.8 2.00 475.20
Pier cap Flaring portion 22 27.352 601.74
22 11.2 2.00 492.80
Dirt wall 2 22.2 1.95 86.58
Deck slab for 12 m c/w (A1 to P1),(P3 to RP4) & ch.406.5 to ch 1380) 2 20 18.00 0.25 180.00
20 18.00 8.00 2880.00
Deck slab for 12 m c/w P10-P11 2 1 40.00 0.25 20.00
1 40.00 12.00 480.00
Anticrash barrier 2 652.27 1.50 1956.82
RE Wall 2 252.27 2.62 1321.15
Closing RE Wall 2 12.00 5.24 125.69

Total 8909.56

4.00 SECTION 4 : SUPERSTRUCTURE

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-

4.01 structure as per drawing and Technical Specification Cum
M-45 PSC I girder
Running section 80 11.00 0.66 580.80
flaring portion 160 1.50 0.84 201.00
End Section 160 1.50 1.02 243.60
End Diaphragm 16 2 12.00 0.50 1.45 278.4
End Diaphragm (On Expansion joint) 6 12.00 1.00 1.45 104.4
Mid Diaphragm 20 1 12.00 0.30 1.45 104.4
Deck slab for 12 m c/w A1-P10,P11-A2 20.00 18.00 12.00 0.25 1080.00
Deck slab for 12 m c/w P10-P11 1.00 40.00 12.00 0.25 120.00

Page 11 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
58.00 Total 2712.60

4.02 Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

Superstructure complete as per Drawing and Technical Specifications. MT
I girder 1512.60 0.10 151.26
Deck slab 1080.00 0.10 108.00
Steel Structure Deck Slab 120.00 0.115 13.80
1200.00 Total 273.06

Providing fusion bounded epoxy to reinforcing bars as per IS 3620 - 1933

specifications for a thickness of 175 +/- 50 microns including testing of
coating at plant, extra cost for careful handling using PVC coating binding
wires, instead of GI Wire touching up the material supplied repair work etc.
4.03 complete as per detailed specification, (Lead up to 340Km to & fro from MT 325 324.63
plant) for all diameters. Ref.:- MoRT&H Cl.1600

High tensile steel wires/strands including all accessories for stressing,

stressing operations and grouting complete as per drawing and Technical
4.04 Specifications MT

18 m span 1,025 40 kg/Cum 41.02

Total 41.02

STRUCTURAL STEEL WORK

Providing and fabricating structural steel plate girder including fabrication
of built up section as per detail design and drawing including
cutting,fabricating,erecting, hoisting,fixing in position,
making riveted / bolted / welded connection and
4.05 including two coat of red oxide and two coat of oil MT ###
paint of approved quality etc. complete.
Spec.No.: As directed by Engineer- in-charge.

For 40 m span , 12m c/w 95 95.00

Say 95.00
5 SECTION 5: FIXED ITEMS

5.01 Drainage Spouts complete as per drawing and Technical specification

100 mm Dia. Water Spout No 1 80.00 80.00

Provision of an Reinforced cement concrete crash barrier at the edges of

the road, approaches to bridge structures and medians, constructed with M-
40 grade concrete with HYSD reinforcement conforming to IRC:21 and
dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-
molded asphalt filler board, keyed to the structure on which it is built and
5.02 installed as per design given in the enclosure to MOST circular No. RW/NH - metre
33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved
drawing and at locations directed by the Engineer, all as specified.
(Reinforcement -41 kg/m)

Anticrash Barrier - M-40

Anticrash barrier 2 652.27 1304.54

Painting two coats after filling the surface with synthetic enamel paint in all
5.03 shades on new plastered concrete surfaces Sqm ###

Anticrash barrier paint 2 652.27 1.8 2348.18

For Existing & proposed kerb 2 252.27 0.46 232.09

2580.27

Supplying, fitting and fixing in position true to line and level POT-PTFE
bearing consisting of a metal piston supported by a disc or unreinforced
elastomeric confined within a metal cylinder, sealing rings, dust seals, PTFE
surface sliding against stainless steel mating surface, complete assembly to
be of cast steel/fabricated structural steel, metal and elastomeric elements
5.04 to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: MT Nos. MT
5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete
as per drawing and approved Technical Specifications. Ref.:-
MORT&H Spec. Cl. 2000 & 2200

POT - PTFE Bearings

Bearings on pedestals for 18 m span 96.00 200 19200.00
Bearings on pedestals for 40 m span 8.00 150 1200.00
Total 20400.00

Providing and laying of a strip seal expansion joint catering to maximum

horizontal movement upto 70 mm, complete as per approved drawings and
standard specifications to be installed by the manufacturer/supplier or their
5.05 authorised representative ensuring compliance to the manufacturer's Rmt
instructions for installation.

Single strip type expansion joint

12.0 mtr c/w 6 12.00 72.00
Total 72.00

Page 12 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
Road Marking with Hot Applied Thermoplastic Compound with
Reflectorising Glass Beads on Bituminous Surface- Providing and laying
of hot applied thermoplastic compound 2.5 mm thick including
reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is
5.06 exclusive of surface applied glass beads as per IRC:35 .The finished surface Sqm
to be level, uniform and free from streaks and holes.

Thermoplastic road marking material on Via duct

Thermoplastic white paint (400m extra for existing flyover) 2.00 800.00 0.15 240.00
Thermoplastic yellow paint 1.00 400.00 0.10 40.00

Providing and applying tack coat with bitumen emulsion using emulsion
5.07 pressure distributor at the rate of 0.20 kg per sqm on the prepared Sqm
bituminous/granular surface cleaned with mechanical broom.

Tack coat on Deck

12.0 mtr c/w 1 400 11.00 4400.00
Existing flyover 1 400 11.00 4400.00
Total 8800.00

Dense Graded Bituminous Macadam-Providing and laying dense graded

polymer modified bituminous macadam with 100-120 TPH batch type HMP
producing an average output of 75 tonnes per hour using crushed
aggregates of specified grading, premixed with bituminous binder @ 4.0 to
4.5 per cent by weight of total mix and filler, transporting the hot mix to
work site, laying with a hydrostatic paver finisher with sensor control to the
5.08 required grade, level and alignment, rolling with smooth wheeled, vibratory Cum
and tandem rollers to achieve the desired compaction as per MoRTH
specification clause No. 507 complete in all respects.

50mm thk DBM on Deck

12.0 mtr c/w 1 400 11.00 0.05 220.00
Existing flyover 1 400 11.00 0.05 220.00
Total 440.00

Providing and laying 40 mm thick mastic asphalt wearing course with

paving grade bitumen meeting the requirements given in table 500-29,
prepared by using mastic cooker and laid to required level and slope after
cleaning the surface, including providing antiskid surface with bitumen
precoated finegrained hard stone chipping of 13.2 mm nominal size at the
5.09 rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center sqm
to center in both directions, pressed into surface when the temperature of
surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic
surface, all complete as per clause 515.

40mm thk Asphalt on Deck

12.0 mtr c/w 1 400 11 4400.00
Existing flyover 1 400 11 4400.00
Total 8800.00

Providing & laying 4mm thick heat seal waterproofing membrane for deck.
5.10 sqm 1 400 11 4400.00

6.00 SECTION 6 : SOLID RAMP

Earth work in excavation of foundation of structures as per drawing and

technical specification, including setting out, construction of shoring and
bracing, removal of stumps and other deleterious matter, dressing of sides
6.01 and bottom, backfilling the excavation earth to the extent required and Cum
utilising the remaining earth locally for road work.

Excavation for RE wall Solid Approach

Main Flyover
CH - 108.676 to CH - 255.560 = 146.88 1 146.88 0.90 1.40 185.07
Closing wall (Transverse direction) = 12.00 1 12.00 0.90 1.40 15.12
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 0.90 1.40 132.79
Closing wall (Transverse direction) = 12.00 1 12.00 0.90 1.40 15.12
Total 348.10

Providing and laying of Filter media with granular materials/stone crushed

aggregates satisfying the requirements laid down in clause 2504.2.2. of
MoRTH specifications to a thickness of not less than 600 mm with smaller
size towards the soil and bigger size towards the wall and provided over the
6.02 entire surface behind abutment, wing wall and return wall to the full height Cum
compacted to a firm condition complete as per drawing and Technical
Specification.

Filter medium 600mm thk

Main Flyover
CH - 108.676 to CH - 255.560 = 146.88 1 146.88 0.60 2.62 230.77
Closing wall (Transverse direction) = 12.00 1 12.00 0.60 5.24 37.71
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 0.60 2.46 155.55
Closing wall (Transverse direction) = 12.00 1 12.00 0.60 4.92 35.42
459.45

Plain Cement Concrete in Open Foundation complete as per Drawing and

6.03 Technical Specifications. Cum
M-20 PCC Below RE wall Foundation
Main Flyover
CH - 108.676 to CH - 255.560 = 146.88 1 146.88 0.90 0.1 13.22

Page 13 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
Closing wall (Transverse direction) = 12.00 1 12.00 0.90 0.1 1.08

CH - 655.560 to CH - 760.948 = 105.388 1 105.39 0.90 0.1 9.48

Closing wall (Transverse direction) = 12 1 12.00 0.90 0.1 1.08
Total 24.86

Reinforced Cement Concrete in Open Foundation complete as per Drawing

6.04 and Technical Specifications. Cum

M40 grade RCC Footing for RE wall

Main Flyover
CH - 108.676 to CH - 255.560 = 146.88 1 146.88 0.60 0.30 26.44
Closing wall (Transverse direction) = 12.00 1 12.00 0.60 0.30 2.16

CH - 655.560 to CH - 760.948 = 105.388 1 105.39 0.60 0.30 18.97

Closing wall (Transverse direction) = 12 1 12.00 0.60 0.30 2.16
Total 49.73

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

6.05 Foundation complete as per Drawing and Technical Specifications. MT
RE wall Footing 1 49.73 0.08 3.98

R.E.WALL FACIA PANELS-Reinforced Earth Structures- Assembling,

joining with facing elements and laying of the reinforcing elements of
aluminium strips complying with BS:1470 quality 5454 in H24 condition
and synthetic geogrids as per clause 3102.8 and approved design and
specifications for accessories like tie-strips, nuts and bolts and loops/lugs
for joining reinforcing elements with the facia pannels, overlaps and other
protective elements for synthetic geogrids, and facing elements of RCC M35
6.06 grade concrete including reinforcement with all necessary temporary form Sqm
work, scaffolding and provision of loops/lugs for lifting of pannels and
joining the reinforcing elements including lifting and erecting in position

RE wall (precast concrete facing of M-35)

Main Flyover
CH - 108.676 to CH - 255.560 = 146.88 1 146.88 2.62 384.62
Closing wall (Transverse direction) = 12.00 1 12.00 5.24 62.84

CH - 655.560 to CH - 760.948 = 105.388 1 105 2.46 259.25

Closing wall (Transverse direction) = 12 1 12.00 4.92 59.04
Total 765.75

Reinforced cement concrete approach slab including reinforcement and

6.07 formwork complete as per drawing and Technical specification Cum.
Approach slab / Friction slab -M35 RCC grade
Main Flyover
CH - 108.676 to CH - 255.560 = 146.88 1 3.50 12.00 0.35 14.70
Closing wall (Transverse direction) = 12.00 1 146.88 2.40 0.25 88.13

CH - 655.560 to CH - 760.948 = 105.388 1 3.50 8.50 0.35 10.41

Closing wall (Transverse direction) = 12 1 105.39 2.40 0.25 63.23
Total 176.48

Supplying, fitting and placing HYSD bar reinforcement in sub-structure MT

6.08 complete as per drawing and technical specifications
Approach slab / Friction slab 1.00 176.48 0.085 15.00

Granular sub Base with Close graded Material

By Plant Mix Method
Construction of granular sub base by providing close graded Material
mixing in a mechanical mix plant at omc, carriage of mixed Material to work
site, spreading in uniform layers with motor grader on prepared surface and
6.09 compacting with vibratory power roller to achieve the desired density, Cum
complete as per clause 401 For Grading II
Ref.: MORT&H Spec. Cl. 4th Rev. 401

Granular sub Base on Solid Approach 300mm

CH - 108.676 to CH - 255.560 = 146.88 1 146.88 12.80 0.30 564.03
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 12.80 0.30 404.69
Total 968.72

Wet Mix macadam

Providing, laying, spreading and compacting framed stone aggregate to wet
mix macadam specifications including premixing the material with water to
OMC in mechanical mix plant, carriage of mixed material by tipper to site,
6.10 laying in uniform layers with paver in sub-base/base course on a well Cum
prepared surface and compacting with vibratory roller to achieve the
desired density.

Wet Mix macadam on Solid Approach 225

CH - 108.676 to CH - 255.560 = 146.88 1 146.88 12.80 0.225 423.03
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 12.80 0.225 303.52
Total 727

Page 14 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
Construction of un-reinforced, dowel jointed, plain cement concrete
pavement over a prepared sub base with 43 grade cement @ 400 kg per
cum, coarse and fine aggregate conforming to IS 383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant
as per approved mix design, transported to site, laid with a fixed form or slip
form paver, spread, compacted and finished in a continuous operation
6.11 including provision of contraction, expansion, construction and longitudinal Cum
joints, joint filler, separation membrane, sealant primer, joint sealant,
debonding strip, dowel bar, tie rod, admixtures as approved, curing
compound, finishing to lines and grades as per drawing .

PQC on Solid approach 300mm thick

CH - 108.676 to CH - 255.560 = 146.88 1 146.88 11.00 0.300 484.72
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 11.00 0.300 347.78
Total 832.50

Construction of dry lean cement concrete Sub- base over a prepared sub-
grade with coarse and fine aggregate conforming to IS: 383, the size of
coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed
15:1, aggregate gradation after blending to be as per table 600-1, cement
content not to be less than 150 kg/ cum, optimum moisture content to be
6.12 determined during trial length construction, concrete strength not to be less cum
than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid
with a paver with electronic sensor, compacting with 8-10 tonnes vibratory
roller, finishing and curing.

DLC on Solid approach 100mm

CH - 108.676 to CH - 255.560 = 146.88 1 146.88 11.00 0.100 161.57
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 11.00 0.100 115.93
252 Total 277.50

Road Marking with Hot Applied Thermoplastic Compound with

Reflectorising Glass Beads on Bituminous Surface- Providing and laying
of hot applied thermoplastic compound 2.5 mm thick including
6.13 reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is Sqm
exclusive of surface applied glass beads as per IRC:35 .The finished surface
to be level, uniform and free from streaks and holes.

Thermoplastic road marking material on Solid approach

Thermoplastic yellow paint 2 252 0.15 75.68
Thermoplastic white paint 1 126 0.10 12.61

Providing and fixing of retro- reflectorised cautionary, mandatory and

informatory sign as per IRC :67 made of high intensity grade sheeting vide
clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground
6.14 by means of properly designed foundation with M15 grade cement concrete No 6 6.00
45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing

Construction of Embankment with Material obtained from Borrowpits

Construction of embankment with approved material obtained from borrow
6.15 pits with all lifts and leads, transporting to site, spreading, grading to Cum
required slope and compacting to meet requirement of table 300-2.

Earth work in embankment

CH - 108.676 to CH - 255.560 = 146.88 1 146.88 12.30 2.62 4730.77
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 12.30 2.46 3188.83
Total 7919.60

7.00 SECTION 7 : MISCELLANEOUS ITEMS

Construction of cement concrete kerb with channel with top and bottom
width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on
M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm
7.01 thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel Rm
laid with kerb laying machine, foundation concrete laid manually, all
complete as per clause 408

Precast concrete kerb stones along the R.E. Wall.

CH - 108.676 to CH - 255.560 = 146.88 1 146.88 146.88
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 105.39
Total 252.27

Sand Filling in Foundation Trenches as per Drawing & Technical

7.02 Specification Cum
Sand fill between R.E. Wall and kerbs
CH - 108.676 to CH - 255.560 = 146.88 1 146.88 0.30 0.30 13.22
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 0.30 0.30 9.48
Total 22.70

Page 15 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
Providing & fixing 60 mm thick interlocking unishape concrete pavers (
monolithic- single layer precast concrete blocks) of gray cement coloured
having average crushing strength of 40 N/mm² as per technicalspecification,
placed on uniformly graded river sand cushioning of average compacted
7.03 thickness 25 mm with properly compacted with mechanical compactor with Sqm
required level, grade and camber etc. complete as specified and as directed
by the Engineer.

Interlocking blocks over sand fill

CH - 108.676 to CH - 255.560 = 146.88 1 146.88 0.30 44.07
CH - 655.560 to CH - 760.948 = 105.388 1 105.39 0.30 31.62
Total 75.68

Pier Protection wall

Plain/Reinforced cement concrete in sub-structure complete as per drawing
7.04 and Technical Specifications Cum
M-35 RCC For Pier Protection wall 22 5.60 0.25 2.00 61.60

Providing traffic wardens for regulation of traffic during construction as

7.05 per requirement of traffic police & as directed by engineers person/day 720 720.00

Provision of red fluorescent with white reflective sleeve traffic cone made of
7.06 low density polyethylene (LDPE) material with a square base of 390 x 390 No 87 86.97
x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m interval, all
as per BS 873

Slip Road & Service Road

Granular sub Base with Close graded Material

By Plant Mix Method
Construction of granular sub base by providing close graded Material
mixing in a mechanical mix plant at omc, carriage of mixed Material to work
site, spreading in uniform layers with motor grader on prepared surface and
8.01 compacting with vibratory power roller to achieve the desired density, Cum
complete as per clause 401 For Grading II
Ref.: MORT&H Spec. Cl. 4th Rev. 401

Granular sub Base on slip road 300 mm thk

Chainage CH - 108.676 to CH -760.948 (Slip Road) 1 652.27 7.00 0.30 1369.77
Slip Road cum Service Road 1 652.27 17.00 0.30 3326.59
Service Road 1 652.27 7.00 0.30 1369.77
Below Obligatory span 1 40.00 12.00 0.30 144.00
For Flyover both side 1 100.00 31.00 0.30 930.00

Total 7140.13

Wet Mix macadam

Providing, laying, spreading and compacting framed stone aggregate to wet
mix macadam specifications including premixing the material with water to
OMC in mechanical mix plant, carriage of mixed material by tipper to site,
8.02 laying in uniform layers with paver in sub-base/base course on a well Cum
prepared surface and compacting with vibratory roller to achieve the
desired density.

Wet Mix macadam on slip road 225 mm thk

Chainage CH - 108.676 to CH -760.948 (Slip Road) 1 652.27 7.00 0.225 1027.33
Slip Road cum Service Road 1 652.27 17.00 0.225 2494.94
Service Road 1 652.27 7.00 0.225 1027.33
Below Obligatory span 1 40.00 12.00 0.225 108.00
For Flyover both side 1 100.00 31.00 0.23 697.50

Total 5355.10

Construction of un-reinforced, dowel jointed, plain cement concrete

pavement over a prepared sub base with 43 grade cement @ 400 kg per
cum, coarse and fine aggregate conforming to IS 383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant
as per approved mix design, transported to site, laid with a fixed form or slip
form paver, spread, compacted and finished in a continuous operation
8.03 including provision of contraction, expansion, construction and longitudinal Cum
joints, joint filler, separation membrane, sealant primer, joint sealant,
debonding strip, dowel bar, tie rod, admixtures as approved, curing
compound, finishing to lines and grades as per drawing .

PQC on Solid approach 300mm thick

Chainage CH - 108.676 to CH -760.948 (Slip Road) 1 652.27 7.00 0.300 1369.77
Slip Road cum Service Road 1 652.27 17.00 0.300 3326.59
For Flyoer both side 1 100.00 48.00 0.30 1440.00

Total 6136.36

Construction of dry lean cement concrete Sub- base over a prepared sub-
grade with coarse and fine aggregate conforming to IS: 383, the size of
coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed
15:1, aggregate gradation after blending to be as per table 600-1, cement
content not to be less than 150 kg/ cum, optimum moisture content to be
8.04 determined during trial length construction, concrete strength not to be less cum
than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid
with a paver with electronic sensor, compacting with 8-10 tonnes vibratory
roller, finishing and curing.

Page 16 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
DLC on Solid approach 100mm
Chainage CH - 108.676 to CH -760.948 (Slip Road) 1 652.272 7 0.1 456.5904
Slip Road cum Service Road 1 652.272 17 0.1 1108.8624
Fter Flyoer both side 1 100.00 48.00 0.1 480.00

Total 2045.45

Scarifying the existing bituminous road surface to a depth of 15 cm

removing, including transportaion any where & bringing the existing road to
proper grade, level & camber &/ as per super elevation, rolling with 10/12
8.05 Tonnes power roller & binding the scarified layer with stone dust/grit/ Sqm
sand,watering,brushing, rolling, etc. complete as specified as directed by the
Engineer.

Chainage CH - 108.676 to CH -760.948 (Slip Road) 1 652.27 7.00 4565.90

Slip Road cum Service Road 1 652.27 17.00 11088.62
Service Road 1 652.27 7.00 4565.90

Total 20220.43

8.05A Milling upto 60mm. Depth Asphaltic surface by using milling machine Sqm
including transportation anywhere as directed.
For existing Flyover 1 400.00 11.00 4400.00

Dense Graded Bituminous Macadam-Providing and laying dense graded

polymer modified bituminous macadam with 100-120 TPH batch type HMP
producing an average output of 75 tonnes per hour using crushed
aggregates of specified grading, premixed with bituminous binder @ 4.0 to
4.5 per cent by weight of total mix and filler, transporting the hot mix to
work site, laying with a hydrostatic paver finisher with sensor control to the
8.06 required grade, level and alignment, rolling with smooth wheeled, vibratory cum
and tandem rollers to achieve the desired compaction as per MoRTH
specification clause No. 507 complete in all respects.

DBM on slip road 50 mm thick

Slip Road 1 607.27 7.00 0.050 212.55

Total 212.55

Providing and laying 40 mm thick mastic asphalt wearing course with

paving grade bitumen meeting the requirements given in table 500-29,
prepared by using mastic cooker and laid to required level and slope after
cleaning the surface, including providing antiskid surface with bitumen
precoated finegrained hard stone chipping of 13.2 mm nominal size at the
8.07 rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center Sq.m
to center in both directions, pressed into surface when the temperature of
surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic
surface, all complete as per clause 515.

Mastic Asphalt on slip road

Slip Road 1 652.27 7.00 4565.90

652 Total 4565.90

Providing and applying primer coat with bitumen emulsion on prepared

surface of granular Base including clearing of road surface and spraying
8.06 primer at the rate of 0.60 kg/sqm using mechanical means. Sqm

Prime coat on slip road

Slip Road 1 652.27 7.00 4565.90

Total 4565.90

Providing and applying tack coat with bitumen emulsion using emulsion
pressure distributor at the rate of 0.20 kg per sqm on the prepared
8.07 bituminous/granular surface cleaned with mechanical broom. Sqm

Tack coat on slip road

Slip Road 1 652.27 7.00 4565.90

Total 4565.90

Construction of footpath/separator by providing a 150 mm compacted

granular sub base as per clause 401 and 25 mm thick cement concrete grade
M15, over laid with precast concrete tiles in cement mortar 1:3 including
8.06 provision of all drainage arrangements but excluding kerb channel. sqm

Chainage CH - 108.676 to CH -760.948 RHS & LHS 3 607.3 1.5 2732.72

1 607.3 2.5 1518.18

Total 4250.90

Page 17 of 29
 THANE MUNICIPAL CORPORATION

Description Of the Item

Sr. No. Unit No. L B D Qty.
Removing & refixing interlocking concrete pavers of 60 mm thick, having of
any size, shape and color considering 10% breakage area of paver block
while removing same from position and replaced same by new paver blocks
having average crushing strength not less than 40 N/mm² placed on
uniformly graded river sand cushioning of average compacted thickness 25
8.07 mm properly compacted with mechanical compactor with required level, Sqm
grade and camber etc. complete as specified and as directed by the Engineer.

Chainage CH - 108.676 to CH -760.948 RHS & LHS 3 607.3 1.2 2186.18

1 607.3 2.2 1336.00

Total 3522.18

Reinforced cement concrete in open foundation complete as per drawing

8.08 and technical specifications cum
RCC M25 Chamber 1.00 652.27 5.6 0.15 547.91

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

8.09 Foundation complete as per Drawing and Technical Specifications. MT MT
For Pier protection wall (60 kg/m3) 1 62 0.06 3.70
For RCC Chamber (60 kg/m3) 1 548 0.06 32.87

Total 36.57

Construction of subsurface drain with perforated pipe of 100 mm internal

diameter of metal/ asbestos cement/ cement concrete/PVC, closely jointed,
perforations ranging from 3 mm to 6 mm depending upon size of material
8.10 surrounding the pipe, with 150 mm bedding below the pipe and 300 mm meter
cushion above the pipe, cross section of excavation 450 x 550 mm. Excavated
material to be utilised in roadway at site

For cable ducting 2 652.3 1304.54

Downtake Runner pipe 80.00 11 868.00

Total 2172.54

Supply of hot dipped galvanzed (in single dip to average 65micron)

octagonal pole made of 3mm thick steel sheet having window & flush cover
locking arrangement at suitable height from base for cable termination
block suitably reinforced with welded steel section at window cut section to
make strength of pole unaffected, with following minimum specifications
8.11 including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 Each
grade. (Design for wind speed upto 150km/hr)

7 mtr height, dia 130mm at bottom & 70mm at top, base plate size
220x220x12mm,foundation bolt 700mm long 26 26

Supplying & fixing following street light pole (existing pole made out of
50mm dia MS "B" Class pipe welded to 300mm long MS pole canopy suitable
dia at angle of 102.50 including having MS traingular stiffner of size
8.12 150x50x5mm thick, making arrangement for lightning bracket with pole by Each
providing suitable size heavy duty nut & bolt in canopy, painting with one
coat of approved steel primer etc. as required.

Single overhang 1 mtr long

26 26

8.13 Dismantling of Existing median Rmt 1 326.14 326.14

Page 18 of 29
 THANE MUNICIPAL CORPORATION

DRG. NO -
Name of Project: DESIGN & CONSTRUCTION OF SOUTH BOUND FLYOVER AT THE JUNCTION OF ANDHERI-GHATKOPAR MMRDA-/MJ-
LINK ROAD ON EASTERN EXPRESS HIGHWAY (EEH), MUMBAI BRIDGE/GAD/10
Date: 08/12/2017 0/R0

Bill Of Quantites
Reference Sr. No. Description Unit Quantity Rate Amount
1 SECTION 1 : Survey and Soil Investigation
Total station survey of existing compound area showing existing plot
Thane DSR boundary, structure, electric pole, manhole, chamber, trees location
2015-16 details adjoining roads etc.
Item No:-22 1.01 Sqm. 17937 6 107625
Page No:-
244

Spot level/contour survey at 5 mtr. X 5 mtr grid w.r.t. GTS datum level or
Thane DSR temporary bench mark
2015-16
Item No:-23 1.02 Sqm. 17937 4 71750
Page No:-
244

Clearing and grubbing road land including uprooting rank vegetation,

grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of
stumps of trees cut earlier and disposal of unserviceable materials and
SSR 17-18 stacking of serviceable material to be used or auctioned, up to a lead of
Maharashtra 1.03 1000 meters including removal and disposal of top organic soil not Hector 1.11 21500 23841
,Item No- exceeding 150 mm in thickness.
2.09 Ref.:- MORT&H Cl.201

Preparation of land plans of road (New alignment) with fixing

boundaries on both sides of centre line of Road / Existing road up to road
Thane DSR boundary, including carrying out detailed plain table survey along the
centre line of the road, showing details of permanent / semi- permanent
2015-16
Item No:-3 1.04 structures, trees, telephone-lines, pipe-lines, field-bunds, cross-roads up Km 0.65 7418 4839
to 100m or as directed, plotting work of surveyed area etc. complete.
Page No:-
238

Providing '7' copies of computer printouts of plans duly bound in the

Thane DSR form of booklet.
2015-16
Item No:-6 1.05 Km 0.65 4708 3071
Page No:-
238

Thane DSR
2015-16 Providing and fixing chainage, apexes, Bench Mark stone of size 17 x 22
Item No:-13 1.06 x 60 cm.in cement concrete 1:4:8 block of size 45 x 45 x 60 cm. including No. 5.22 603 3147
Page No:- excavation, conveyance etc. complete.
235

Dismantling of cement concrete pavement by mechanical means using

SSR 17-18 pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and
Maharashtra stock piling at designated locations and disposal of dismantled materials
1.07 up to a lead of 1000 metres, stacking serviceable and unserviceable cum 531 746 395831
,Item No-
3.11 materials separately ( For layers PQC & DLC)

Ref:- MORT&H specification clause no. 202

Taking trial bores for detailed investigations with 150 diameter boring in
overburden, hard murum, boulders including all materials such as
temporary casing pipes & accessories, grease, steel balls, drill rods, core
lifter, reaming shells, core barrels, diamonds drills, air houses, water
Thane DSR swivels etc. and other such materials as required, including conveying
2015-16 such materials and machinery to site of works. collected and preserving
Page No:- 1.08 the loose samples in glass or plastic jar, collection and preservation of
229/230 undisturbed samples, water samples, wash samples as directed at site of
work and conveying the same to the head quarter of concerned office as
directed etc. complete.

Item No:-1c a. Soil RM 79.20 2256 178675

Item No:-3a b. Hard Rock RM 151.80 3908 593234
Item No:-2a c. Soft Rock RM 165.00 2398 395670

Thane DSR
2015-16 Providing tuntappa box of jungle wood of size 1.25m x 0.35m x 0.15m
Item No:-5 1.09 size for preserving core samples with all fixtures and fastening and No 22 2780 61160
Page No:- conveying to the site office or to the head quarters as directed.
230

Page 19 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

Thane DSR Carrying out various tests on sub soil & rock samples as specified on
2015-16 1.1 undisturbed and disturbed soil samples for characterization of soil profile
Page No:- at site laboratory & submission of laboratory observation sheet, graphs
231/232 etc. as per IS 2720 (latest version) as directed by Engineer in charge.

Item No:-
10(1) 1) Natural moisture content (NMC) of soils by oven drying method. No 22 244 5368

Item No:- 2) Wet and Dry Density No 22 5368

10(2) 244

Item No:- 3) Sieve Analysis No 22 10648

10(6) 484

Item No:- 4) Liquid & Plastic limits No 22 7986

10(8) 363

Item No:- 5) Shrinkage limits No 22 7986

10(9) 363

Item No:- 6) Specific gravity No 22 10648

10(10) 484

Conducting standard penetration test on soil, sand

Thane DSR by split spoon sample for150 diameter bore hole including labour &
2015-16 material etc. complete. (Equipment and materials is to be supplied by
Item No:-9 1.11 Department free of cost). No 22 596 13112
Page No:-
231

Collecting disturbed samples of soil from bore holes as per

BW-1-07-a 1.12 specifications and delivering the same to the testing laboratory anywhere No 22 300 6600
as directed etc. complete as specified and directed.

Installation of a steel portable barricade with horizontal rail 300 mm

wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x 5 mm angle
iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow
R.A. 4 1.13 and white stripes, 150 mm in width at an angle of 450, 'A' frame painted Rmt 435 3121 1357161
with 2 coats of yellow paint, complete as per IRC:SP:55-2001

Total Of Section 1 3263718

2 SECTION: FOUNDATION

SSR 17-18
Maharashtra Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement
,Item No- 2.01 complete as per Drawing and Technical Specifications and removal of
excavated earth with all lifts and lead upto 1000 m.
15.126
Ref:- MORT&H specification clause no. 1100, 1600.
1200mm dia Rmt 1,213 10,898 13220582

Providing, placing and driving in position 6 mm thick permanent M.S.

Liner up to required depth with 12 mm thick M.S. cutting edge of 0.5
SSR 17-18 meter length of bottom including fabricating, cutting the M.S. sheet to
Maharashtra 2.02 required diameter and shape, welding the joints and driving with the help MT 119 51,425 6123299
,Item No- of required machineries including all materials, labour and lift etc.
15.128 complete.

Excavation for foundation in earth, soils of all types, sand,gravel

and soft murum, including removing the excavated material
SSR 17-18 upto a distance of 50 metres beyond the building area and
Maharashtra stacking and spreading as directed, dewatering, preparing the
,Item No- 2.03 bed for the foundation and necessary back filling, ramming, Cum
21.04 watering including shoring and strutting etc. complete. (Lift from
1.5m to 3.0m)

Ref:- MORT&H specification clause no. 304, 301

i) earth, soil of all types, sand gravel 1440 136 195838

Plain/Reinforced Cement Concrete in Open Foundation complete as per

SSR 17-18 Drawing and Technical Specifications.
Maharashtra 2.04 Cum 87 5,280 460796
,Item No-
11.31
Ref:- MORT&H specification clause no. 1500,1700,2100
M20 grade PCC-Pilecap

Plain/Reinforced Cement Concrete in Open Foundation complete as per

R.A.45 2.05 Drawing and Technical Specifications. Cum 1,184 4531.00 5365021

Page 20 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

Ref:- MORT&H specification clause no. 1500,1700,2100
RCC M40 grade for Pilecap

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

R.A.12 2.06 Foundation complete as per Drawing and Technical Specifications. MT 279.14 46425.60 12959196

Ref:- MORT&H specification clause no. 1600

Providing fusion bounded epoxy to reinforcing bars as per IS 3620 -

1933 specifications for a thickness of 175 +/- 50 microns including
Thane DSR testing of coating at plant, extra cost for careful handling using PVC
2015-16 coating binding wires, instead of GI Wire touching up the material
Item No:-73 2.07 supplied repair work etc. complete as per detailed specification, (Lead up MT 279.14 14015 3912133
Page No:- to 340Km to & fro from plant) for all diameters
217 Ref.:- MoRT&H Cl.1600

Pile load test on single vertical pile in accordance with I.S. 2911 part IV.
R.A.7 2.08 MT

Ref:- MORT&H specification clause no. 1100

a) Initial test and routine load test. 1,800 300 540000

Carrying out Plate Load Test complete with necessary and adequate Kent
ledge loads, equipments and instruments etc. as per specifications for
determination of bearing capacity of soil etc. complete as specified and
BW-1-18 2.09 directed and submitting reports in duplicate. No. 1 75,000 75000

Carrying out Dynamic load test at 2.50 times the design load on any dia.
Of pile including all preparations for conducting test by precasting
required C.C hammer head and all machineries, labour etc. including
2.10 submitting report with graphs and interpretations complete (excluding No.
cost of pile).

BW-5-6-k a) On first Pile 1 45,000 45000

BW-5-6-l b) Subsequent Pile 1 25,000 25000

Conducting low strain pile integrity test on RCC Bored Cast In Situ piles
BW-5-7-d 2.11 using pile integrity tester equipment manufactured by pile dynamic Test. No. 3 500 1500
of USA or TNO of Netherlands or equivalent that confirms to ASTM D5882
and submitting reports in quadruplicate appointing expert etc. complete.

Total Of Section 2 42923366

3 SECTION 3: SUBSTRUCTURE

Plain/Reinforced cement concrete in sub-structure complete as per

R.A. 47 3.01 drawing and Technical Specifications (with provision of architectural Cum
beautification)

Ref:- MORT&H specification clause no. 1500,1700,2200

RCC M-40 grade for Pier and Piercaps
For height between 5 m to 10 m 550 7014.42 3857420

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

R.A. 13 3.02 Substructure complete as per Drawing and Technical Specifications. MT 91.4 46,425.60 4241660

Ref:- MORT&H specification clause no. 1600

Providing fusion bounded epoxy to reinforcing bars as per IS 3620 -

1933 specifications for a thickness of 175 +/- 50 microns including
Thane DSR testing of coating at plant, extra cost for careful handling using PVC
2015-16 coating binding wires, instead of GI Wire touching up the material
Item No:-73 3.03 supplied repair work etc. complete as per detailed specification, (Lead up MT 91.4 14,015 1280476
Page No:- to 340Km to & fro from plant) for all diameters
217 Ref.:- MoRT&H Cl.1600

Providing and applying anticarbonation Acrylic Paint in two coats over

required coat of primer to the exposed superstructure concrete surfaces
BW-5-7-c 3.04 of girder and slab soffits/sides including cleaning and surface preparation, Sqm 8,909.56 234 2084838
equipment, labors etc. complete.

Total Of Section 3 11464394

4 SECTION 4:SUPERSTRUCTURE

Page 21 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

4.01 Furnishing and Placing Reinforced/ Prestressed cement concrete in
R.A. 48c super-structure as per drawing and Technical Specification Cum

RCC M45 grade concrete for Deck Slab

Ref:- MORT&H specification clause no. 1500,1600,1700
For height between 5 m to 10 m 2713 8353.8 22660518

4.02 Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

R.A. 14 Superstructure complete as per Drawing and Technical Specifications.

Ref:- MORT&H specification clause no. 1600

I Girder with Slab MT 273 46425.6 12676974

Providing fusion bounded epoxy to reinforcing bars as per IS 3620 -

1933 specifications for a thickness of 175 +/- 50 microns including
Thane DSR testing of coating at plant, extra cost for careful handling using PVC
2015-16 coating binding wires, instead of GI Wire touching up the material
Item No:-73 4.03 supplied repair work etc. complete as per detailed specification, (Lead up MT 324.63 14015 4549703
to 340Km to & fro from plant) for all diameters
Page No:- Ref.:- MoRT&H Cl.1600
217

Providing and fixing in position to exact profile and prestressing high

tensile steel of specified ultimate strength including cost of sheathing
duct (ID66mm) Tube anchorage set with bearing plate, permanent
RA MORTH 4.04 wedges, preparing cable with sheathing and spacers, cement for grouting MT 41.02 148657.60 6097340
etc. complete. Spec. No. :
MORT&H clause 1800.

Providing and fabricating structural steel plate girder including

fabrication of built up section as per detail design and drawing including
cutting,fabricating,erecting, hoisting,fixing in position,
making riveted / bolted / welded connection and
including two coat of red oxide and two coat of oil
Quotation 4.05 paint of approved quality etc. complete. MT 95.00 154000 14630000
M.T. 113883.00 21836.00
Spec.No.: As directed by Engineer- in-charge.

Total Of Section 4 60614535

5 SECTION 5: FIXED ITEMS

SSR 17- Drainage Spouts complete as per drawing and Technical specification
18,Item No- 5.01 Nos. 80.00 704 56320
14.50
Ref:- MORT&H specification clause no. 2705

Provision of a Reinforced cement concrete crash barrier at the edges of

the road, approaches to bridge structures and medians, constructed with
M-40 grade concrete with HYSD reinforcement conforming to IRC:21 with
provision of architectural beautification and dowel bars 25 mm dia, 450
mm long at expansion joints filled with pre-molded asphalt filler board,
keyed to the structure on which it is built and installed as per design given
R.A.57 5.02 in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated metre 1304.54 5,012 6538375
24 June 1994 as per dimensions in the approved drawing and at locations
directed by the Engineer, all as specified

Ref:- MORT&H specification clause no. 809

SSR 17- Painting two coats after filling the surface with synthetic enamel paint in
18,Item No- 5.03 all shades on new plastered concrete surfaces Sqm
35.07
Anticrash barrier & Kerb paint 2580.27 62 159977

Supplying, fitting and fixing in position true to line and level POT-PTFE
bearing consisting of a metal piston supported by a disc or unreinforced
elastomeric confined within a metal cylinder, sealing rings, dust seals,
PTFE surface sliding against stainless steel mating surface, complete
SSR 17- assembly to be of cast steel / fabricated structural steel, metal and
18,Item No- 5.04 elastomeric elements to be as per IRC: 83 part-I & II respectively and MT 20400 166 3386400
13.09 other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of
MoRTH Specifications complete as per drawing and approved Technical
Specifications.

Ref:- MORT&H specification clause no. 2000,2200

Page 22 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

Providing and laying of a strip seal expansion joint catering to maximum
horizontal movement upto 70 mm, complete as per approved drawings
SSR 17- and standard specifications to be installed by the manufacturer/supplier
18,Item No- 5.05 or their authorised representative ensuring compliance to the Rmt 72.00 9,660 695520
14.68 manufacturer's instructions for installation.

Ref:- MORT&H specification clause no. 2607

Road Marking with Hot Applied Thermoplastic Compound with

Reflectorising Glass Beads on Bituminous Surface- Providing and
laying of hot applied thermoplastic compound 2.5 mm thick including
5.06 reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is Sqm
exclusive of surface applied glass beads as per IRC:35 .The finished surface
to be level, uniform and free from streaks and holes.

Ref:- MORT&H specification clause no. 803

R.A. 22 Thermoplastic white paint Sqm 240 736 176640
R.A. 22 Thermoplastic yellow paint Sqm 40 736 29440

Providing and applying tack coat with bitumen emulsion using emulsion
pressure distributor at the rate of 0.20 kg per sqm on the prepared
R.A. 30 5.07 bituminous/granular surface cleaned with mechanical broom. Sqm 8,800.00 9 79200

Ref:- MORT&H specification clause no. 503

DENSE BITUMINOUS MACADAM: Proving and laying dense

bituminous macadam using crushed aggregates of grading 2,
premixed with bituminous binder VG-30 Bitumen @ 4.50 per cent by
weight of total mix and filler, transported to site with VTS , laid over a
previously prepared surface, finished to the required grade, level,
SSR 17- alignment, and rolling to achieve the desired density for 50/75 mm
18,Item No- 5.08 compacted thickness .USING 80 TPH Batch mix type hot mix plant with Cum 440.00 4,733 2082520
3.45 SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and
V-Sat attachment with Stone Dust filler.

Providing and laying 40 mm thick mastic asphalt wearing course with

paving grade bitumen meeting the requirements given in table 500-29,
prepared by using mastic cooker and laid to required level and slope after
cleaning the surface, including providing antiskid surface with bitumen
precoated fine grained hard stone chipping of 13.2 mm nominal size at the
rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm
R.A. 54 5.09 center to center in both directions, pressed into surface when the Cum 8800.00 1,015 8932000
temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm
over mastic surface, all complete as per clause 515.

Providing & laying 4mm thick heat seal waterproofing membrane for
5.10 deck. sqm 4400.00 0

Total Of Section 5 22136391

6 SECTION 6 : SOLID RAMP

Earth work in excavation of foundation of structures as per drawing and

technical specification, including setting out, construction of shoring and
bracing, removal of stumps and other deleterious matter, dressing of sides
RA MORTH 6.01 and bottom, backfilling the excavation earth to the extent required and Cum 348 145 50475
utilising the remaining earth locally for road work including cost for
disposing off at lead of 10 Km

Providing and laying of Filter media with granular materials/stone

crushed aggregates satisfying the requirements laid down in clause
2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm
SSR 17- with smaller size towards the soil and bigger size towards the wall and
18,Item No- 6.02 provided over the entire surface behind abutment, wing wall and return Cum 459 1,052 483344
12.72 wall to the full height compacted to a firm condition complete as per
drawing and Technical Specification.

SSR 17-18 Plain/Reinforced Cement Concrete in Open Foundation complete as per

Maharashtr Drawing and Technical Specifications.
6.03 Cum 25 5,280 131284
a,Item No-
11.31
Ref:- MORT&H specification clause no. 1500,1700,2100
M20 grade PCC-Footing for R.E. Wall

Page 23 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

Plain/Reinforced Cement Concrete in Open Foundation complete as per
R.A.45 6.04 Drawing and Technical Specifications. Cum 50 4,531 225322
Ref:- MORT&H specification clause no. 1500,1700,2100
M40 grade RCC-Footing for R.E. Wall

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

R.A.12 6.05 Foundation complete as per Drawing and Technical Specifications. MT
RE wall Footing 3.98 46,426 184696

R.E.WALL FACIA PANELS-Reinforced Earth Structures- Assembling,

joining with facing elements and laying of the reinforcing elements of
aluminium strips complying with BS:1470 quality 5454 in H24 condition
and synthetic geogrids as per clause 3102.8 and approved design and
specifications for accessories like tie-strips, nuts and bolts and loops/lugs
for joining reinforcing elements with the facia pannels, overlaps and other
protective elements for synthetic geogrids, and facing elements of RCC
RA MORTH 6.06 M35 grade concrete including reinforcement with all necessary Sqm 766 3,523 2697752
temporary form work, scaffolding and provision of loops/lugs for lifting of
pannels and joining the reinforcing elements including lifting and erecting
in position

Reinforced cement concrete approach slab including reinforcement and

SSR 17- formwork complete as per drawing and Technical specification ( M35
18,Item NO- 6.07 grade RCC concrete ) Cum. 176.5 5556 980499
14.53
Ref:- MORT&H specification clause no. 1500,1700,2100

Supplying, fitting and placing HYSD bar reinforcement in sub-structure MT

MORTH 6.08 complete as per drawing and technical specifications
Approach slab / Friction slab 15.00 46,426 696404

Granular sub Base with Close graded Material

By Plant Mix Method
Construction of granular sub base by providing close graded Material
mixing in a mechanical mix plant at omc, carriage of mixed Material to
MORTH 6.09 work site, spreading in uniform layers with motor grader on prepared Cum 969 1400.1 1356263
surface and compacting with vibratory power roller to achieve the desired
density, complete as per clause 401 For Grading II

Wet Mix macadam

Providing, laying, spreading and compacting graded stone aggregate to
wet mix macadam specifications including premixing the material with
water to OMC in mechanical mix plant, carriage of mixed material by
MORTH 6.10 tipper to site, laying in uniform layers with paver in sub-base/base course Cum 727 1651 1199487
on a well prepared surface and compacting with vibratory roller to
achieve the desired density

Ref:- MORT&H specification clause no. 406

Construction of un-reinforced, dowel jointed, plain cement concrete

pavement over a prepared sub base with 43 grade cement @ 400 kg per
cum, coarse and fine aggregate conforming to IS 383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a batching and mixing
plant as per approved mix design, transported to site, laid with a fixed
MORTH, form or slip form paver, spread, compacted and finished in a continuous
Item No- 6.11 operation including provision of contraction, expansion, construction and cum 832.50 5,787 4817664
6.2 longitudinal joints, joint filler, separation membrane, sealant primer, joint
sealant, debonding strip, dowel bar, tie rod, admixtures as approved,
curing compound, finishing to lines and grades as per drawing .

PQC on Solid approach 300mm thick

Construction of dry lean cement concrete Sub- base over a prepared sub-
grade with coarse and fine aggregate conforming to IS: 383, the size of
coarse aggregate not exceeding 25 mm, aggregate cement ratio not to
exceed 15:1, aggregate gradation after blending to be as per table 600-1,
SSR 17-18, cement content not to be less than 150 kg/ cum, optimum moisture
Item No- 6.12 content to be determined during trial length construction, concrete cum 277.50 2,470 685423
5.13 strength not to be less than 10 Mpa at 7 days, mixed in a batching plant,
transported to site, laid with a paver with electronic sensor, compacting
with 8-10 tonnes vibratory roller, finishing and curing.

DLC on Solid approach 100mm

Page 24 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

Road Marking with Hot Applied Thermoplastic Compound with
Reflectorising Glass Beads on Bituminous Surface- Providing and
laying of hot applied thermoplastic compound 2.5 mm thick including
reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is
6.13 exclusive of surface applied glass beads as per IRC:35 .The finished surface Sqm
to be level, uniform and free from streaks and holes.

R.A. 22 With hot applied thermoplastic paint for yellow Sqm 76 736 55702
R.A. 22 With hot applied thermoplastic paint for white Sqm 13 736 9284

Providing and fixing of retro- reflectorised cautionary, mandatory and

informatory sign as per IRC :67 made of high intensity grade sheeting vide
clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a
mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the
R.A. 40 6.14 ground by means of properly designed foundation with M15 grade cement Nos. 6 8698 52188
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing

Construction of Embankment with Material obtained from

Borrowpits Construction of embankment with approved material
obtained from borrow pits with all lifts and leads, transporting to site,
R.A. 26 6.15 spreading, grading to required slope and compacting to meet requirement Cum 7,920 714 5654597
of table 300-2.

Ref:- MORT&H specification clause no. 503

Total Of Section 6 19280383
7 SECTION 7 : MISCELLANEOUS ITEMS

Construction of cement concrete kerb with channel with top and bottom
width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on
M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm
R.A. 49 7.01 Cum 252.27 9,259 2335786
thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel
laid with kerb laying machine, foundation concrete laid manually, all
complete as per clause 408

Sand Filling in Foundation Trenches as per Drawing & Technical

R.A. 37 7.02 Specification Cum 22.70 2,311 52470

Providing & fixing 60 mm thick interlocking unishape concrete pavers

(monolithic- single layer precast concrete blocks) of gray cement coloured
having average crushing strength of 40 N/mm² as per
technicalspecification, placed on uniformly graded river sand cushioning
RW-3-12 7.03 of average compacted thickness 25 mm with properly compacted with Sqm 75.68 850 64329
mechanical compactor with required level, grade and camber etc.
complete as specified and as directed by the Engineer.

Plain/Reinforced cement concrete in sub-structure complete as per

RA MORTH 7.04 drawing and Technical Specifications Cum 61.60 5,023 309423

Ref:- MORT&H specification clause no. 1500,1700,2200

RCC M-35 grade for Pier Protection

MSRDC/200 7.05 Providing traffic wardens for regulation of traffic during construction as person 720.00 600 432000
5/2.2/pg.4 per requirement of traffic police & as directed by engineers /day

Provision of red fluorescent with white reflective sleeve traffic cone made
R.A. 6 7.06 of low density polyethylene (LDPE) material with a square base of 390 Nos. 87 834 72533
x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m
interval, all as per BS 873

Total Of Section 7 3266541

Slip Road & Service Road

Granular sub Base with Close graded Material
By Plant Mix Method
Construction of granular sub base by providing close graded Material
mixing in a mechanical mix plant at omc, carriage of mixed Material to
R.A. 27 8.01 work site, spreading in uniform layers with motor grader on prepared Cum 7140 1400 9996538
surface and compacting with vibratory power roller to achieve the desired
density, complete as per clause 401 For Grading II

Page 25 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

Wet Mix macadam
Providing, laying, spreading and compacting graded stone aggregate to
wet mix macadam specifications including premixing the material with
water to OMC in mechanical mix plant, carriage of mixed material by
R.A. 28 8.02 tipper to site, laying in uniform layers with paver in sub-base/base course Cum 5355 1651 8840998
on a well prepared surface and compacting with vibratory roller to
achieve the desired density

Ref:- MORT&H specification clause no. 406

Construction of un-reinforced, dowel jointed, plain cement concrete

pavement over a prepared sub base with 43 grade cement @ 400 kg per
cum, coarse and fine aggregate conforming to IS 383, maximum size of
coarse aggregate not exceeding 25 mm, mixed in a batching and mixing
plant as per approved mix design, transported to site, laid with a fixed
form or slip form paver, spread, compacted and finished in a continuous
MORTH, 8.03 operation including provision of contraction, expansion, construction and Cum
Item No- 6.2 longitudinal joints, joint filler, separation membrane, sealant primer, joint
sealant, debonding strip, dowel bar, tie rod, admixtures as approved,
curing compound, finishing to lines and grades as per drawing .

PQC on Solid approach 300mm thick 6136.36 5,787 35511106

Construction of dry lean cement concrete Sub- base over a prepared sub-
grade with coarse and fine aggregate conforming to IS: 383, the size of
coarse aggregate not exceeding 25 mm, aggregate cement ratio not to
exceed 15:1, aggregate gradation after blending to be as per table 600-1,
cement content not to be less than 150 kg/ cum, optimum moisture
MORTH, content to be determined during trial length construction, concrete
8.04 strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, cum
Item No- 6.2
transported to site, laid with a paver with electronic sensor, compacting
with 8-10 tonnes vibratory roller, finishing and curing.

DLC on Solid approach 100mm 2045.45 2,470 5052268

Scarifying the existing bituminous road surface to a depth of 15 cm

removing, including transportaion any where & bringing the existing road
to proper grade, level & camber &/ as per super elevation, rolling with
MCGM 8.05 10/12 Tonnes power roller & binding the scarified layer with stone Sqm 20220.43 170 3437473
dust/grit/ sand,watering,brushing, rolling, etc. complete as specified as
directed by the Engineer.

MCGM,Item Milling upto 60mm. Depth Asphaltic surface by using milling machine
No-RW-7- including transportation anywhere as directed. Sqm 4400.00 92 404800
09

Dense Graded Bituminous Macadam-Providing and laying dense graded

polymer modified bituminous macadam with 100-120 TPH batch type
HMP producing an average output of 75 tonnes per hour using crushed
aggregates of specified grading, premixed with bituminous binder @ 4.0
to 4.5 per cent by weight of total mix and filler, transporting the hot mix
to work site, laying with a hydrostatic paver finisher with sensor control
RA 31 8.06 to the required grade, level and alignment, rolling with smooth wheeled, cum 212.55 4,733 1005976
vibratory and tandem rollers to achieve the desired compaction as per
MoRTH specification clause No. 507 complete in all respects.

Providing and laying 40 mm thick mastic asphalt wearing course with

paving grade bitumen meeting the requirements given in table 500-29,
prepared by using mastic cooker and laid to required level and slope after
cleaning the surface, including providing antiskid surface with bitumen
precoated finegrained hard stone chipping of 13.2 mm nominal size at the
rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm
R.A. 54 8.07 center to center in both directions, pressed into surface when the cum 4565.90 1,015 4634393
temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm
over mastic surface, all complete as per clause 515.

Providing and applying primer coat with bitumen emulsion on prepared

surface of granular Base including clearing of road surface and spraying
R.A. 29 8.08 primer at the rate of 0.60 kg/sqm using mechanical means. Sqm 4565.90 23 105016

Ref:- MORT&H specification clause no. 502

Page 26 of 29
 THANE MUNICIPAL CORPORATION

Reference Sr. No. Description Unit Quantity Rate Amount

Providing and applying tack coat with bitumen emulsion using emulsion
pressure distributor at the rate of 0.20 kg per sqm on the prepared
R.A. 30 8.09 bituminous/granular surface cleaned with mechanical broom. Sqm 4565.90 9 41093

Ref:- MORT&H specification clause no. 503

Construction of footpath/separator by providing a 150 mm compacted

granular sub base as per clause 401 and 25 mm thick cement concrete
MORTH, grade M15, over laid with precast concrete tiles in cement mortar 1:3
Item-4.16 8.10 including provision of all drainage arrangements but excluding kerb sqm
channel.

Chainage CH - 108.676 to CH -760.948 RHS & LHS 4250.90 791 3362465

Removing & refixing interlocking concrete pavers of 60 mm thick, having

of any size, shape and color considering 10% breakage area of paver block
while removing same from position and replaced same by new paver
blocks having average crushing strength not less than 40 N/mm² placed
RW-3-14 8.11 on uniformly graded river sand cushioning of average compacted Sqm
thickness 25 mm properly compacted with mechanical compactor with
required level, grade and camber etc. complete as specified and as
directed by the Engineer.

Chainage CH - 108.676 to CH -760.948 RHS & LHS 3522.18 301 1060175

Reinforced cement concrete in open foundation complete as per drawing

MORTH 8.12 and technical specifications cum
RCC M25 Chamber 547.91 4342.60 2379347

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in

R.A.12 8.13 Foundation complete as per Drawing and Technical Specifications. MT
For RCC Chamber 36.57 46,426 1697808

Construction of subsurface drain with perforated pipe of 100 mm internal

diameter of metal/ asbestos cement/ cement concrete/PVC, closely
jointed, perforations ranging from 3 mm to 6 mm depending upon size of
material surrounding the pipe, with 150 mm bedding below the pipe and
MORTH 8.14 300 mm cushion above the pipe, cross section of excavation 450 x 550 meter
mm. Excavated material to be utilised in roadway at site

For cable ducting (Anticrash barrier)

Downtake Runner pipe 2172.54 316 686524

Supply of hot dipped galvanzed (in single dip to average 65micron)

octagonal pole made of 3mm thick steel sheet having window & flush
PWD cover locking arrangement at suitable height from base for cable
chattisgard termination block suitably reinforced with welded steel section at window
h, Item No- 8.15 cut section to make strength of pole unaffected, with following minimum Each
m 21.7 specifications including 3mm thick anchor plate, 4 nos 20mm dia
(21.7.2), P foundation bolts of EN8 grade. (Design for wind speed upto 150km/hr)
No-140

7 mtr height, dia 130mm at bottom & 70mm at top, base plate size
220x220x12mm,foundation bolt 700mm long 26 10,273 268032

Supplying & fixing following street light pole (existing pole made out of
PWD 50mm dia MS "B" Class pipe welded to 300mm long MS pole canopy
chattisgard suitable dia at angle of 102.50 including having MS traingular stiffner of
h, Item No- 8.16 size 150x50x5mm thick, making arrangement for lightning bracket with Each
m 21.9 pole by providing suitable size heavy duty nut & bolt in canopy, painting
(21.9.2), P with one coat of approved steel primer etc. as required.
No-141

Single overhang 1 mtr long 26 1,030 26874

8.17 Dismantling of Existing median Rmt 326 2,000 652272

79163159
Total cost = 242,112,487

Page 27 of 29
 THANE MUNICIPAL CORPORATION

DESIGN & CONSTRUCTION OF SOUTH BOUND FLYOVER AT THE JUNCTION

OF ANDHERI-GHATKOPAR LINK ROAD ON EASTERN EXPRESS HIGHWAY
(EEH), MUMBAI

Abstract Summary
Sr.No. Particulars Amount
1 Survey & Soil Investigation 3263718
2 Foundation 42923366
3 Substructure 11464394
4 Superstructure 60614535
5 Fixed item 22136391
6 Solid Approach 19280383
7 Miscellaneous items 82429700
TOTAL 242112487

Page 29 of 29