Scribd
Upload
3K views

RS Signal and PDSCH RE Power Calculation

This document contains information about radio resource efficiency (RRE) calculations for a radio remote unit (RRU) under different configurations. It shows: 1) RRU power calculations and reference signal power formulas for various LTE bandwidth and precoding values. 2) Reference signal power outputs decrease with increasing bandwidth and precoding values due to more resource elements being allocated to reference signals. 3) A diagram explaining how reference signal and PDSCH resource elements are allocated in OFDM symbols for different antenna ports and precoding values. The remaining power is allocated to PDSCH.

Uploaded by

shashank.prajapati9389
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
3K views

RS Signal and PDSCH RE Power Calculation

This document contains information about radio resource efficiency (RRE) calculations for a radio remote unit (RRU) under different configurations. It shows: 1) RRU power calculations and reference signal power formulas for various LTE bandwidth and precoding values. 2) Reference signal power outputs decrease with increasing bandwidth and precoding values due to more resource elements being allocated to reference signals. 3) A diagram explaining how reference signal and PDSCH resource elements are allocated in OFDM symbols for different antenna ports and precoding values. The remaining power is allocated to PDSCH.

Uploaded by

shashank.prajapati9389
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 15

BW LTE (MHz) 5 10 15 20

Nrb 25 50 75 100

For Pb = 1, BW 5 MHz
Psingle Port = PRRU - 10*Log(Nport)
Nport = Total Antenna Port

RRU Power (Watt) 80


Power For GSM (Watt) 20
Power For LTE (Watt) 60
Power for LTE (dBm) 47.8
MIMO 2T2R
Nport 2
Psingle Port (dBm) 44.79
Psingle Port (Watt) 30.2

RS Power = Psingle Port (dBm) - 10*Log(12*Nrb) + 10*Log(1+Pb)

BW LTE (MHz) 5
Nrb 25
Pb 1
RSRE Power (dBm) 23.03
RSRE Power (Watt) 0.2
For Pb = 0, BW 5 MHz For Pb = 3, BW 5 MHz
Psingle Port = PRRU - 10*Log(Nport) Psingle Port = PRRU - 10*Log(Nport)
Nport = Total Antenna Port Nport = Total Antenna Port

RRU Power (Watt) 80 RRU Power (Watt)


Power For GSM (Watt) 20 Power For GSM (Watt)
Power For LTE (Watt) 60 Power For LTE (Watt)
Power for LTE (dBm) 47.8 Power for LTE (dBm)
MIMO 2T2R MIMO
Nport 2 Nport
Psingle Port (dBm) 44.79 Psingle Port (dBm)
Psingle Port (Watt) 30.2 Psingle Port (Watt)

RS Power = Psingle Port (dBm) - 10*Log(12*Nrb) + 10*Log(1+Pb) RS Power = Psingle Port (dBm) - 10*Log(12*Nrb) +

BW LTE (MHz) 5 BW LTE (MHz)


Nrb 25 Nrb
Pb 0 Pb
RSRE Power (dBm) 20.02 RSRE Power (dBm)
RSRE Power (Watt) 0.1 RSRE Power (Watt)

212
182
For Pb = 0, BW 5 MHz
*Log(Nport) Psingle Port = PRRU - 10*Log(Nport)
Nport = Total Antenna Port

80 RRU Power (Watt) 60


20 Power For GSM (Watt) 20
60 Power For LTE (Watt) 40
47.8 Power for LTE (dBm) 46.02
2T2R MIMO 2T2R
2 Nport 2
44.79 Psingle Port (dBm) 43.01
30.2 Psingle Port (Watt) 20

Bm) - 10*Log(12*Nrb) + 10*Log(1+Pb) RS Power = Psingle Port (dBm) - 10*Log(12*Nrb) + 10*Log(1+Pb)

5 BW LTE (MHz) 5
25 Nrb 25
3 Pb 1
26.04 RSRE Power (dBm) 21.25
0.4 RSRE Power (Watt) 0.13
For Pb = 0, BW 5 MHz
Psingle Port = PRRU - 10*Log(Nport)
Nport = Total Antenna Port

RRU Power (Watt) 60


Power For GSM (Watt) 20
Power For LTE (Watt) 40
Power for LTE (dBm) 46.02
MIMO 2T2R
Nport 2
Psingle Port (dBm) 43.01
Psingle Port (Watt) 20

RS Power = Psingle Port (dBm) - 10*Log(12*Nrb) + 10*Log(1+Pb)

BW LTE (MHz) 5
Nrb 25
Pb 0
RSRE Power (dBm) 18.24
RSRE Power (Watt) 0.067
For Pb = 0, BW 5 MHz
Psingle Port = PRRU - 10*Log(Nport)
Nport = Total Antenna Port

RRU Power (Watt) 60


Power For GSM (Watt) 20
Power For LTE (Watt) 40
Power for LTE (dBm) 46.02
MIMO 2T2R
Nport 2
Psingle Port (dBm) 43.01
Psingle Port (Watt) 20

RS Power = Psingle Port (dBm) - 10*Log(12*Nrb) + 10*Log(1+Pb)

BW LTE (MHz) 5
Nrb 25
Pb 3
RSRE Power (dBm) 24.26
RSRE Power (Watt) 0.27
2 & 4 Tx Ant
Type B OFDM Symbol (CRS & Ty

Total RE in 1 RB = 12
Total RS in first symbol
Total RE that is not used
So, RE remaining for 12 -
Total Power remaining aft
Maka Power for RE PDSCH =
RS RS
Pb = 0 1 1 1 x 1 1 1 1 1 x 1 1 1 5/4
RS PDSCH

Pb = 1 2 1 1 x 1 1 2 1 1 x 1 1 2 8/8

2 1

Pb = 2 3 1 1 x 1 1 3 1 1 x 1 1 3 6/8

3 3/4

Pb = 3 4 1 1 x 1 1 4 1 1 x 1 1 4 4/8

4 1/2
2 & 4 Tx Ant
Symbol (CRS & Type B PDSCH )

tal RE in 1 RB = 12
tal RS in first symbol in 1 TTI = 2
tal RE that is not used because it will be used for the RS in the symbol to 5 in 1 TTI ( other antenna port ) = 2
, RE remaining for 12 - 2 - 2 = 8
tal Power remaining after being used by RS is total RE - RS = 12 - 2 = 10
ka Power for RE PDSCH = 10/8 = 5/4

5/4 x 5/4 5/4 1 5/4 5/4 x 5/4 5/4


PDSCH not PDSCH PDSCH RS PDSCH PDSCH not PDSCH PDSCH
used used

8/8 x 8/8 8/8 2 8/8 8/8 x 8/8 8/8

OR
1 x 1 1 2 1 1 x 1 1

6/8 x 6/8 6/8 3 6/8 6/8 x 6/8 6/8

OR
3/4 x 3/4 3/4 3 3/4 3/4 x 3/4 3/4

4/8 x 4/8 4/8 4 4/8 4/8 x 4/8 4/8

OR
1/2 x 1/2 1/2 4 1/2 1/2 x 1/2 1/2
other antenna port ) = 2

You might also like