Scribd
Upload
759 views2 pages

Captiva Control Valve Body Removal PDF

Uploaded by

Burhan udin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
759 views2 pages

Captiva Control Valve Body Removal PDF

Uploaded by

Burhan udin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2009 Chevrolet Captiva | Captiva, Terrain, Antara VIN C Service Manual | Transmission | Automatic Transmission - AF33-5 |

Repair Instructions - Off Vehicle | Document ID: 1469954

Control Valve Body Assembly Removal

1. Place the transmission in Neutral (N).


2. Remove the 2 control valve body bolts/screws (30), control valve body fluid passage cover (37)
and gasket (38).

3. Remove the six 10 mm control valve body mounting bolts/screws (1–6).

© 2018 General Motors. All rights reserved.


4. While holding the control valve body assembly, disconnect the manual shift detent lever
assembly (710) from the manual valve link (336).
5. Move the detent lever assembly to the neutral position for ease of removing the manual valve.
6. Remove the control valve body assembly (39).

7. Remove the 2 case fluid passage seals (86).

© 2018 General Motors. All rights reserved.

You might also like