Cambio IOS - v2
Cambio IOS - v2
docs.cisco.com/Product_Documentation/Getting_Started/Hardware_and_Software_Installation/S
oftware_Installation_and_Upgrade_for_Cisco_IOS_XE_Routers
Router#show sdwan ?
Router#show sdwan sy
Router#show running-config
Building configuration...
version 16.9
no service pad
service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no logging rate-limit
no aaa new-model
subscriber templating
ipv6 unicast-routing
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2529654491
revocation-check none
rsakeypair TP-self-signed-2529654491
certificate self-signed 01
quit
netconf-yang
redundancy
mode none
!
!
interface GigabitEthernet0/0/0
no ip address
shutdown
negotiation auto
interface GigabitEthernet0/0/1
no ip address
shutdown
negotiation auto
ip forward-protocol nd
ip http server
ip http secure-server
ip ssh version 2
!
control-plane
line con 0
login local
stopbits 1
line vty 0 4
login local
line vty 5 80
login local
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
filter xpath /ios-events-ios-xe-oper:system-logout-change
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
telemetry ietf subscription 2147483627
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
filter xpath /ios-events-ios-xe-oper:interface-admin-state-change
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
encoding encode-xml
stream rfc5277
end
Router#
Router#
Router#sh ver
Cisco IOS Software [], ISR Software (X86_64_LINUX_IOSD-UCMK9-M), Version 16.9.3, RELEASE
SOFTWARE (fc1)
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
GPL code under the terms of GPL Version 2.0. For more details, see the
software.
States and local country laws governing import, export, transfer and
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
-----------------------------------------------------------------
------------------------------------------------------------------
Router# sh
--------------------------------------------------------------------------------
Router#
Cambio de IOS
Materiales:
Router#dir
Directory of bootflash:/
Router#
Router#er
Router#erase st
Router#erase startup-config
This command is not supported
Router#
Router#conf
Router#config ter
Router#config terminal
This command is not supported
Router#
Router#sh
Router#reload
Router#erase startup-config
Router#reload
Listo.