Scribd
Upload
353 views

Critical Region

The critical region is the range of values for which the null hypothesis will be rejected given a chosen significance level. One-tailed tests are used when interested in values above or below a value, while two-tailed tests are used to determine if things are different. To find the critical region, critical values are obtained from statistical tables based on the test and significance level.

Uploaded by

mustafa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
353 views

Critical Region

The critical region is the range of values for which the null hypothesis will be rejected given a chosen significance level. One-tailed tests are used when interested in values above or below a value, while two-tailed tests are used to determine if things are different. To find the critical region, critical values are obtained from statistical tables based on the test and significance level.

Uploaded by

mustafa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

The critical region

The critical region is the region of values that corresponds to the rejection
of the null hypothesis at some chosen probability level. The shaded area
under the Student's t distribution curve is equal to the level of significance.
The critical values are tabulated and thus obtained from the Student's t
table or anther appropriate table. If the absolute value of the t statistic is
larger than the tabulated value, then t is in the critical region.

1. One tailed and two tailed tests

The statistical tests used will be one tailed or two tailed depending on the
nature of the null hypothesis and the alternative hypothesis.

The following hypothesis applies to test for the mean:

 two tailed test:

H0 : µ = µ0 H1 : µ  µ0;

1
 One tail tests:

H0 : µ = µ0 H1 : µ < µ0;

H0 :µ = µ0 H1 : µ > µ0;

2
When we are interested only in the extreme values that are greater than or
less than a comparative value (µ0) we use a one tailed test to test for
significance. When we are interested in determining that things are
different or not equal, we use a two tailed.

 To determine the critical region for a normal distribution, we use the


table for the standard normal distribution. If the level of significance is 
= 0.10, then for a one tailed test the critical region is below z = -1.28 or
above z = 1.28. For a two tailed test, use /2 = 0.05 and the critical
region is below z = -1.645 and above z = 1.645. If the absolute value of
the calculated statistics has a value equal to or greater than the critical
value, then the null hypotheses, H0 should be rejected and the alternate
hypotheses, H1.
 To determine the critical region for a t-distribution, we use the table of
the t-distribution. (Assume for the moment that we use a t-distribution
with 20 degrees of freedom). If the level of significance is  = .10, then
for a one tailed test t = -1.325 or t = 1.325. For a two tailed test, use /2
= 0.05 and then t = -1.725 and t = 1.725. If the absolute value of the
calculated statistics has a value equal to or greater than the critical value,
then the null hypotheses, H0 will be rejected and the alternate
hypotheses, H1, is assumed to be correct.

3
Example 1:

A tire manufacturing plant produces 15.2 tires per hour. This yield has an
established variance of 2.5 ( =1.58 tires/hour). New machines are
recommended, but will be expensive to install. Before deciding to
implement the change, 12 new machines are tested. They produce 16.8 tire
per hour. Is it worth buying the new machines?

Before testing, verify that the data comes from a normal distribution
(assumption of the test)

1. Formulate hypotheses:

H0 :  = 15.2
(ie. Mean yield of new machines is equal to 15.2 with a variance of 2.5)

H1 :  > 15.2
(ie. Mean yield of new machines is greater than 15.2)

2. Choose 

We choose = 0.10.

3. Select the statistic

Here we must use the z statistic to test the null hypothesis since the
variance is known.

4
4. Find the critical region:

The z-value obtained from Table 1 for z is 1.282. Hence, the critical region
for a one tailed test is: z > 1.282.

5. Compute the statistic:

Assume (the yield) has a normal distribution with mean 15.2 and variance
equal to 2.5 (N(15.2, 2.5)). Then, z can be calculated as following:

1. Draw conclusion:

Since the calculated z = 3.51 > 1.282, we reject the H0 hypothesisthat the
mean yield from the new machines equals 15.2. The mean yield of the new
machine is greater than 15.2.

Example 2:

The manufacturing of rubber chemicals by a batch process, has a normal


yield of 690 lbs per batch. A new process is tried experimentally on 12
batches with the following yields: 620, 590, 660, 620, 700, 710, 690, 720,
700, 690, 720 and 650 lbs. Is the yield of the new process a significantly
different from that of the old process?

From the data we calculated the following:

, .

Assume the data is approximately normal.

5
1. H0 :  = 690
That is 672.5 is not significantly different from 690

H1:   690
That is 672.5 is significantly different from 690

2. Choose = 0.01
3. Select statistic : test the H0 using the Student's t statistic.
4. Critical region (from Table 2, n=12-1=11):
|t| > t(.995)(11) = 3.106.
5. Compute the value of the test statistic:

6. Since the calculated |t|=1.38 < 3.106, the H0 that the new process does
not differ from the old process with respect to batch yields can not be
rejected. Conclude that the new process gives equal yields.

Example 3:
A drift test was run at San Angelo to compare Goodyear tires to competitor
tires on a Ford Escort. Is there a significant difference in the precision of
the results between suppliers?

Goodyear Competitor

No. of tests : 17 25

Mean - 27.2 - 39.2

Variance s2 132.25 207.36

6
Assume the observations come from two normal distributions.

1. Formulate the hypotheses:

H0: = vs H1 :

2. Choose =0.10.

3. Select a test statistic: F statistic with F distribution with (24, 16)


degrees of freedom.

5. The critical region obtained from Table 3, is:

6. Compute the statistic:

Note: By convention, always put the larger variance in the


numerator.

7. Since the calculated F value is smaller than the critical one (1.57 <
2.24), we accept H0 that the two population variances are equal. Thus,
assume that the supplier does not affect the precision.

You might also like