PROPOSAL MAGANG INDUSTRI

Disusun oleh :

RIKI SETIAWAN
17 644 008

PROGRAM STUDI TEKNOLOGI KIMIA INDUSTRI

JURUSAN TEKNIK KIMIA
POLITEKNIK NEGERI SAMARINDA
2019
 LEMBAR PENGESAHAN

MAGANG INDUSTRI DI
PT PERTAMINA HULU MAHAKAM
OLEH :

Nama : RIKI SETIAWAN

Nim : 17 644 008
Jurusan : TEKNIK KIMIA
Program Studi : TEKNOLOGI KIMIA INDUSTRI

PROPOSAL MAGANG INDUSTRI INI DISAHKAN UNTUK MEMENUHI

SALAH SATU SYARAT GUNA MEMPEROLEH IJASAH S1-TERAPAN
TEKNOLOGI KIMIA INDUSTRI
POLITEKNIK NEGERI SAMARINDA

Telah Disahkan Oleh :

Mengetahui,
Ketua Jurusan Ketua Program Studi

Dedy Irawan, ST, M.T Irmawati Syahrir, ST, M.T

NIP. 19750208 200212 1 001 NIP.19690326 200003 2 001

Mengetahui dan Menyetujui,

Kabag Akademik dan Kemahasiswaan

Drs. M. Taufan
NIP. 19631003 198903 1 002
 MAGANG

In order to improve the quality of POLITEKNIK NEGERI SAMARINDA

student then every prospective student of the S1-TERAPAN program is required
to conduct an internship to apply the teaching and learning activities that have
been conducted during the lecture and add insight into the students around the
industry who will later become workplaces for undergraduate-applied student

Based on the statement, the student named:

Name : RIKI SETIAWAN

Nim : 17 644 008

Semester : IV

Departement : CHEMICAL ENGINEERING

Study Program : INDUSTRIAL CHEMICAL TECHNOLOGY

To be allowed to do an internship at:

Company : PT PERTAMINA HULU MAHAKAM

Address : JL. Yos Sudarso, Mekar Sari, Balikpapan Tengah,

Prapatan, Kota Balikpapan, East Kalimantan
 CHAPTER I
PRELIMINARY

A. Latar Belakang
Based on Government Regulation No.2 of 1989 concerning Education
and Government Regulation No.30 of 1990 concerning Higher Education, it is
stated that there are 2 (two) educational channels in Indonesia, namely academic
lines and professional lines. In the academic path of science development, in
general it includes pure sciences such as mathematics, physics, and others.
Whereas in the professional path which is the ultimate goal of education,
graduates can carry out (skilled) work on their respective disciplines prepared as
ready-to-use personnel..
Politeknik is one of the lines of professional education with emphasis on
the proportion of curriculum compared to the practice between theory and the
same. This is because after graduation students are expected to be ready to work,
but it is realized that although the practice portion is already large, actual field
experience is still needed. This is intended as a provision of knowledge so that it
does not require special training or adjustments that are too long if they have
graduated later. Therefore, it is important to do the Internship Program.In
connection with this internship process, it is necessary to collaborate with
companies and government agencies (who will later become users of Polytechnic
graduates) to accommodate S1-Terapan students who will carry out internships.
Indeed, it is realized, that the placement of students in jobs that are in accordance
with their scientific discipline is an obstacle that is prone and confidential for a
company or agency. For this reason, it should be stated that the purpose of this
internship is solely to train students to work and study the world of companies or
government agencies where they practice and train students to know the real
conditions of the workplace..
The Department of Chemical Engineering is a place where the
development of science emerges and to meet the needs of experts and skilled in
managing production systems or chemical industry systems, which involve human
components, materials, and machinery / production facilities.The industrial world
and universities are an interrelated entity. These relationships are often referred to
as partnerships. A student who is studying, especially students majoring in
engineering need to understand the real conditions that exist in the industrial
world. Students not only understand theory and practice lectures, but also need to
understand the real condition of the company. Changes in technology and the
acceleration of information have affected aspects of the production process in the
company. With the role of universities, research and development is expected to
be able to answer the challenges in these changes.
Through an internship program at the company, this S1-Terapan student
is expected to be able to find problems, which will then be analyzed, handled, and
dealt with appropriately. This method is done by giving students the opportunity
to go directly and find reality and problems that exist in the field / industry.
Considering this, I chose PT PERTAMINA HULU MAHAKAM as my
place of internship. I want to explore the Chemical Industry Process system in this
company, in accordance with the department I took and my educational
background, namely the Chemical Industry Technology Study Program majoring
in Chemical Engineering at Politeknik Negeri Samarinda.

B. PURPOSE
The internship objectives for S1-Terapan students are as follows:
1. Improve students' ability to the real conditions of the company
2. Add insight into chemical industry processes that are related to
techniques that have been studied in college.
3. Being able to identify problems in the industry by going directly to the
factory.
4. Able to provide solutions and appropriate handling of problems that exist
in the industry.
C. USABILLTY
For Student
1. Obtain practical work experience and learn more about the relevance of
knowledge received during college, where theories and practices obtained
can be applied in real situations in the field / industry.
2. Applying scientific disciplines that have been obtained and owned both on
and off campus.
3. Expanding insight, knowledge, and deepening before plunging into the
real field. And can measure the ability of yourself in dealing with technical
problems, especially in the work environment later.
4. Is a variety of learning in order to explore Chemical Engineering which is
directly related to the field and application in the field.
For Commpany

1. Helps complete tasks and daily work at the company where the internship
is.
2. Means to bridge cooperative relations between companies and Politeknik
Negeri Samarinda, especially regarding labor recruitment.
3. Corporate imaging facilities, especially in the scope of S1-Terapan
students in the Politeknik Negeri Samarinda Chemical Engineering
Department.
For Politeknik Negeri Samarinda

1. Input to evaluate the extent to which Chemical Engineering Students

understand and practice what has been practiced in college to be applied or
used in the company.
2. Print a workforce that is skilled, creative, dynamic, professional, honest,
and responsible for doing a job.
3. Imaging facilities at the Politeknik Negeri Samarinda in the company's
environment and establishing cooperation with the place of internship
company so that later it can facilitate the Politeknik graduates in finding
work.
 CHAPTER II
CONTENTS

1. Place and Time Of Implementatio

a. The location of apprentice implementation
The location of the execution of the internship is in PT PERTAMINA HULU
SANGA-SANGA,
b. Apprentice Implementation Time
Implementation time internships tailored to Academic Calendar Politeknik Negeri
Samarinda that will be held on:
Semester : IV (empat)
Duration : 4-6 mounth
Date : 10 February 2020 – 31 Agust 2020

2. Participants of the internship

Apprentice participant is conducted by students of the Politeknik Negeri
Samarinda Department of Chemical Engineering Technology Courses in chemical
industry:
Name : RIKI SETIAWAN
Nim : 17 644 008
Departement : Chemical Engeneering
Study Program : Chemical Industry Tecnology

3. The method of internship

Methods used in this internship is:
a. Participation, i.e., to participate in the activities/activity in the field of study
chemical engineering at the company..
b. Observation, namely regarding work mechanism directly at the chemical
industry Process and Analysis Laboratory in the field of study chemical
engineering company.
4. Strategy Implementation Internship
As for the strategies that will be undertaken during the implementation of
internship:
a. Master and equib students with the field of study that will be examined during
execution of the internship.
b. Reproduce literature needed as a source of reference in the implementation of
good practice as well as in the manufacture of its report.
c. Consult things not understood during the execution of the internship to staff
supervisor

5. The role of the Students in the Implementation of the Internship

Students act as subjects who perform internships while also contributing in the
form of assistance to parties in implementing the company's internal activity of
the company, having regard to the provisions set by the company .

6. Results to be Achieved
Results to be achieved in the activities of this internship is the increased quality of
the skill of the students in the academic field that is not only based on the theory
of the course but also the shape of the application in the form of practice. In
addition, it also adds insightful work that can be used as a cornerstone in prospect
future i.e. After entering the world of work.

7. Courses in learned over 5 Semester

As consideration of party PT PERTAMINA in BALIKPAPAN, V I RU list of
courses I've traveled for 3 semester yesterday, which I am required to travel in this
4 semester courses, and I'm going to travel in semester 5 and later are as follows:
a. Semester I've traveled (1-3 Semester)
1. Introduction to chemical engineering
2. Basic Chemistry
3. Organic Chemistry
4. Basic Physics
5. Indonesian Language
6. Basic mathematics
7. United Kingdom Language Techniques 1
8. Machine Elements
9. the Pancasila
10. The principle of chemical engineering
11. Physical Chemistry
12. chemical analysis of the classic
13. Transport of fluid and Solid
14. Drawing techniques
15. Chemical Engineering Mathematics 1
16. The language of United Kingdom Engineering 2
17. K-3 and employment
18. Religious education
19. the mass and Energy Balance
20. Transfer process
21. Chemical Analysis Instruments
22. The process of chemical industry
23. Construction materials chemical engineering
24. Mechanical Treatment
25. Process control
26. Chemical Engineering Mathematics 2
27. Citizenship
28. The basic Chemistry lab course
29. Practical organic chemistry
30. Teaching physical chemistry
31. Chemical analysis of the practical-Classic
32. Practical Chemical Analysis Instruments
33. Teaching computer programming
b. Semester I was required to travel (Semester 4)
1. Chemical Engineering Thermodynamics
2. Chemical Reaction Engineering 1
3. Thermal mass transfer
4. Heat transfer
5. Bioprocessing
6. The Petroleum Technology
7. The design of the tool Processes 1
8. Research methodology
9. Industrial Management
10. Practical Control
11. Practical fluid mechanics and mass transfer
c. the Semester I would commute (5 Semesters)
1. Chemical Reaction Engineering 2
2. Utilities
3. Technology of coal
4. Technology of vegetable oil
5. Sewage treatment Techniques
6. The design of the tool Processes 2
7. Operation a multilevel Separation
8. Engineering Economics
9. Practical Utility and sewage treatment
10. Practical heat transfer and Thermodinamika
d. Transcript 1-3 Semester Grades (GPA While)
• the attached
e. Curriculum Vitae
• the attached
f. Copy Card Sign Student Sign Card & Inhabitants
• the attached
 CHAPTER III
COVER

Great expectations of me to have party PT PERTAMINA HULU

MAHAKAM deign gave me the opportunity to carry out this internship program.
I also hope when I received, at the time of the internship program in this company,
I can help and provide benefits for the company. Thus there will be reciprocity
between the parties, other than that I also hope to have the guidance and
supervision of the company.
Upon the willingness of guidance and support from various parties, I say
thank you.
LAMPIRAN
 CURRICULUM VITAE
1. PERSONAL DATE
Full Name : Riki Setiawan
Place/Date of birth : July 07 1999,Bontang
Gander : Male
Religion : Islam
Blood type : (A)
Address : Jl.KAPAL SELAM, RT 13 Kel. Loktuan, Kec.
Bontang Utara,East Kalimantan
Phone Number : +6285932443799
Email : [email protected]

2. FORMAL EDUCATION
 SD Negeri 004 Bontang (2011)
 SMP Negeri 5 Bontang (2014)
 SMA Negeri 3 Bontang (2017)
 Is currently completing undergraduate studies-applied in the
Departmenet of Chemical Engineering Technology Courses in chemical
industry, Politeknik Negeri Samarinda

Motto:
"life is art Illustrator without erasers, do your best to owned opportunity "

So this life-history list I made with real, may be beneficial.

.

Samarinda, February,15 2019

Respect me,

Riki Setiawan
NIM. 17 644 008