Scribd
Upload
857 views

RES2DINV Lecture PDF

The RES2DINV program automatically determines a 2D resistivity model of the subsurface based on data from electrical resistivity imaging surveys. It inverts large datasets with many electrodes to produce 2D images of subsurface resistivity distribution related to physical properties. The program can model different electrode arrangements and aid in interpreting surveys for applications like detecting buried utilities or mapping groundwater levels.

Uploaded by

Asem A. Hassan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
857 views

RES2DINV Lecture PDF

The RES2DINV program automatically determines a 2D resistivity model of the subsurface based on data from electrical resistivity imaging surveys. It inverts large datasets with many electrodes to produce 2D images of subsurface resistivity distribution related to physical properties. The program can model different electrode arrangements and aid in interpreting surveys for applications like detecting buried utilities or mapping groundwater levels.

Uploaded by

Asem A. Hassan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 39

Application of 2DRESINV Program for

Interpretation of 2D Electrical Resistivity Data

Dr Asem Ahmed Hassan


Dept. Of Petroleum Geology and Minerals
College of Science, University of Diyala
RES2DINV:

RES2DINV is a windows based program that automatically determines a


2D resistivity model (interpretation) for the subsurface for the data
obtained from Electrical Resistivity Imaging ERI surveys.

ERI Method is based on the traditional four-electrode resistivity method


combined with automatic switching of a larger number of electrodes
Electrical Resistivity Method: Background
Electrical resistivity is a physical property of a material that describes its ability to resist
the flow of electricity.

A DC or low frequency current is injected through current electrodes C1 & C2 and the resulted
voltage difference is measured using voltage electrodes P1 & P2 from which soil resistivity is
calculated.:

ρ : Resistivity (Ohm.m)
∆V : Voltage difference (Volts)
I : Current (Amps)
K: Geometric Factor (m)
C1, C2 Current Electrodes
P1, P2 Voltage Electrodes
∂
1D Electrical Resistivity Studies
Resistivity meter, 12 Volt Battery, 2 current reels (750m
each), 2 voltage reels (250m each) and four stainless steel
electrodes System

•VES (Vertical Electrical Sounding)


•CST (Constant Separation Travers) or Horizontal Profiling

VES CST
2D Electrical Resistivity Imaging ERI

Advantageous:
(1) Speed up data acquisition
(2) Provide large data sets to construct 2D and 3D resistivity images
(3) Offer the flexibility to choose a suitable electrode arrangement for a particular problem, which in
turn reduces the effort and laborious electrode switching using manual systems
ERI Method: the main steps

ERI is a technique of construction an image of the subsurface electrical properties.


Subsurface resistivity distribution can be related to physical conditions of interest
such as lithology, porosity and water content..etc.

Calculating the resistivity distribution that is consistent with observed data

2D Model 3D Model
2D Data Collection Wenner Array

C1, C2 Current Electrodes


P1, P2 Voltage Electrodes

Data Level

∂
∂
∂
∂
∂
∂
∂
∂
∂
∂
∂
∂
Data interpretation (RES2DINV program)

 RES2DINV is a windows based program for interpretation the 2D resistivity


data.
An example of the electrodes arrangement and measurement sequence
that can be used for a 2-D electrical imaging survey is shown in the figure. This
program is designed to invert large data sets up to 21000 data points
collected with a system with a large number of electrodes up to 16000 electrodes.

∂
Data interpretation (RES2DINV program)

 The 2-D model used by the inversion program, which consists of a number
of rectangular blocks, is shown in the Figure.
 The arrangement of the blocks is loosely tied to the distribution of the
data points in the pseudosection.
The distribution and size of the blocks is automatically generated by the
program using the distribution of the data points as a rough guide.

∂
RES2DINV: Inversion process

The purpose the inversion is to find a 2D model that will produce a model
response that matches the measured apparent resistivity values. An initial
model is created, and the program modifies it so as to reduce the difference
between the calculated and measured apparent resistivity values

∂
RES2DINV: Inversion Program

This program can be used for Wenner, pole-pole, dipole-dipole, pole-


dipole, Wenner-Schlumberger and dipole-dipole arrays. In addition to
these common , the program even non-conventional arrays.

Besides normal surveys carried out with the electrodes on the ground
surface, the program also supports underwater and cross-borehole surveys!

∂
Using the program:

∂
Data file:

∂
Data format:

∂
Editing the data:

∂
Data inversion:

∂
Display the results:

∂
Case Study (1):

Determination of Groundwater Level at University Diyala


Campus Site (4th Stage graduation research)

∂
Field work (Data Collection)

Wenner Array

Wenner- Schlumberger Array


Field Work (Data Collection)

∂
Data Preparation

∂
Data Interpretation (RES2DINV Program)

Wenner Array

Wenner- Schlumberger Array


Case Study (2):

Detection of Buried Pipes at Diyala University Campus Site


Using 2D Electrical Resistivity Imaging Technique

∂
Study Area

Study Area
Geotechnical soil boring log (Al-Ebdaa, 2015)

A buried pipe in the study area


Field work (Data Collection)

∂
Data Interpretation (RES2DINV Program)

Wenner

Wenner- Schlumberger

Dipole-Dipole
∂

Thank You Thank You


Thank You

You might also like