Scribd
Upload
71 views

Lecture 10 Proportion Scale 2017 PDF

Uploaded by

Shikafa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
71 views

Lecture 10 Proportion Scale 2017 PDF

Uploaded by

Shikafa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 39

Islamic University-Gaza

Faculty of Engineering
Architecture Department

Principles of Architectural and Environmental


Design
EARC 2417

Lecture 10
Proportion and scale
Instructor: Dr. Suheir Ammar
2017

1
Proportions & Scale
 Scale refers to the size of something compared to a
reference standard “1:100” or to the size of something else”
human scale “

 Proportion refers to the proper or harmonious relation of


one part to another or to the whole.
Proportions
why are proportioning systems useful and of particular
significance in architectural design?
1. The intent of all theories of proportions is to create a
sense of order and harmony among the elements in a visual
construction.
2. To establishes a consistent set of visual relationships
between the parts of a building.
3.They can visually unify the multiplicity of elements in an
architectural design by having all of its parts belong to the
same family of proportions. This provides an aesthetic
rationale.
Proportions
The designer usually has a range of choices
when determining the proportions of things.
Many architectural elements are sized
and proportioned according to:
 the nature of materials--wood or
Aluminium window
 how building elements respond to forces Standard Casement Window Units
“ tension or pressure” - structural
properties,
 its function,
 how things are made “ manufacturing”,
 Aesthetic and visual judgment.
Because these elements are mass-produced
in factories, they have standard sizes.
Steel, wood, concrete blocks
Proportions

However, the designer still has the


ability to control the proportion of
the forms and spaces within and
around a building. Spans, height and loads

A steel column will be thinner than a


wood post supporting the same load.
In a similar manner, columns become
thicker as their loads and unsupported
height increase.
Proportions
 A ratio refers to the quantitative comparison of two
similar things, while proportion refers to the equality
of ratios
 A proportion is the equality between two ratio.

 A proportioning system
establishes a consistent
set of visual relationships
between the parts of a
building; as well as
between the parts and the
whole.
Proportions
If a space 400 square feet in area were required,
what dimensions-what ratios of width-to-length and
length-to height-should it have?
1.The functioning of the space and the nature of the
activities to be accommodated will influence its
form and proportion. 2. The structural system, or
3.the exterior environment “dimention of site,
climate” might limit one or more of its dimensions.
Proportions

 A square space, having four equal faces, is static


in nature.
 If its length expands and dominates its width, it
becomes more dynamic.
 While square and rectangle spaces define places
for activity, linear spaces encourage movement
and are capable to be divided into a number of
zones.
Effect of Perspective
 A rectangle can appear to be
exactly square, almost a square, or
very much unlike a square. It can
appear to be long, short, or broad,
depending on our point of view.

 Perspective affect the perception


of the space’s proportions.

 Colors have another effect:


narrow, wide, far…..
Types of Proportion
Theories of Proportion

A number of theories of desirable proportions have been


developed in the course of history.

1. Golden Section
2. Classical Orders
3. Renaissance Theories
4. Modulor
5. Ken
6. Anthropometry
7. Scale
1. Golden Section
 The Greeks recognized the dominating role the Golden
Section played in the proportions of the human body.

 Another progression that closely approximates the Golden


Section in whole numbers is the Fibonacci Series:
1,1,2,3,5,8,13,21. Each term is the sum of the two
preceding ones, and the ratio between two consecutive
terms tends to approximate the Golden Section as the series
progresses to infinity. 21/13 ≈ 1.6
1. Golden Section

0.5 AC
Golden section by extention & by division

A rectangle whose sides are proportioned according to the


Golden Section is known as a Golden Rectangle.
1. Golden Section
The Parthenon, Athens
Two different analysis
1. Golden Section
If the diagonals of two rectangles are either
parallel or perpendicular to each other, they
indicate that the two rectangles have similar
proportions. These diagonals, as well as lines
that indicate the common alignment of
elements are called regulating lines.
A regulating line: is a means of verification
order or rhythm.
regulating lines
similar proportions
Regulating lines
2. Classical Orders
2. Classical Orders

a: base
b: column diameter
c: body
d: capital
e: shaft
f: cornice
g: cornice
h: frieze
k: architrave.
2. Classical Orders
To the Greeks and Romans of classical
antiquity, the Orders represented in their
proportioning of elements the perfect
expression of beauty and harmony.
1.The basic unit of dimension was the
diameter of the column.
2.From this module were derived the
dimensions of the shaft, the capital, as well as
the pedestal “ base of column” below and the
entablature the above “ upper parts”, down to
the smallest detail.

3. The system of spacing between columns-was also based on the


diameter of the column.
4. The sizes of columns varied according to the extent of a building.
5. The Orders were not based on a fixed unit of measurement, but
were proportionate and in harmony with one another (next figure).
2. Classical Orders- the system of spacing

The Classical Orders according to Vignola


2. Classical Orders- the system of spacing
3. Renaissance Theories/ Palladio

Renaissance theories: is a proportion which depends on


mathematical system generated from the Greek mathematical
system of proportions.
Palladio was probably the most influential architect of the Italian
Renaissance. In The Four Books on Architecture, he proposed
seven most beautiful and proportionable manners of rooms as
below.
3. Renaissance Theories/ Palladio
3. Renaissance Theories

Palladio also determined the proper height of


a room as follow:
1- Height of rooms with flat ceilings would
be equal to their floor width. Width= height
2- Height of vaulted square rooms would
be one-third greater than its floor length.
1:1:1.3
3- For other rooms, height can be measured
according to the equations of the types of
proportions “Geometric, Arithmetic,
Harmonic.”
Geometric, Arithmetic & Harmonic proportions

3. In each case, the height of a room is equal approximately to the mean


(b) between the two extremes of the width (a) and length (c) of the room.
a<b<c
4. The Modular/ Le Corbusier
 Le Corbusier developed his proportioning system, the Modular,
to order the dimensions.
 He saw the measuring tools of the Greeks, Egyptians, and other
high civilizations as being "infinitely rich and accurate because
they formed part of the mathematics of the human body, the
source of that harmony which moves us to beauty.
Old civilizations== mathematics of the human body== beauty
 He therefore based his measuring tool, the Modular, on both
mathematics (the aesthetic dimensions of the Golden Section
and the Fibonacci Series),and the proportions of the human body
(functional dimensions).
Le Corbusier == mathematics dimensions “Golden Section and the
Fibonacci Series” + functional dimensions “human body “
4. The Modular
 The basic grid consist of

43
three measures, 113,70, and
43 cm, proportioned
according to the Golden
Section.
43+ 70= 113
113 +70=183
113 +70+43 =226 (2x113)

functional dimensions
5. The Modular
113, 183, and 226 define the space
occupied by the human figure. From
113 and 226, Le Corbusier developed
the Red and Blue‘ series, diminishing
scales of dimensions that were related
to the stature of the human figure.
Red: 6, 9, 15, 24, 39, 63, 102, 165, 269,
Blue:11 ،18 ،30 ،48 ،78 ،126 ،204
4. The Modular
The principal work of LeCorbusier that exemplified the use of the
Modulor was his United‘ Habitation at Marseilles. It uses 15 measures of
the Modul or to bring human scale to a building that is 140 m long, 24m
wide, and 70m high with 17 storeys & 337 apartments.
4. The Modular
5. The Traditional Japanese Ken
 The traditional Japanese unit of measure, the shaku, was
originally imported from China. 1 ken = 6 shaku
 The shaku is almost equivalent to the English foot. 1 ken
=6*30=180cm
 The ken was soon standardized unit for residential
architecture.
 The ken evolved into an aesthetic module that ordered the
structure, materials, and space of Japanese architecture.
 The standard floor mat in designing with the ken modular
(3x6 shaku or 0.5x1 ken or 90x180cm)
 The traditional floor mat was originally proportioned to
accommodate two persons sitting or one person sleeping.
floor mat = two persons sitting = one person sleeping
5. Ken

Design of rooms
1 mat = bed area
5. Ken
6. Anthropometry
 Anthropometry: refers to the measurement of the size and
proportions of the human body.
 Spaces in architecture are determined by its dimensions.
 Average dimensions must always be treated with caution
since variations exists between men and women, among
various age and racial groups.
 The different situation of human body affects the design.
6. Anthropometry

Human scale in architecture is based


on the dimensions and proportions of
the human body.
Reference:
Ching, F. D. K. (2007). Architecture: Form, Space, and Order (3rd Edition
ed.): John Wiley & Sons, Inc.

Thank you

You might also like