Scribd
Upload
213 views4 pages

Design of Pile-Stress - P214: 905 MM 7540 0.96 % Stress Check For Critical Load Case Load Comb

This document summarizes the design of a circular reinforced concrete pile using the working stress method. Key details include a pile diameter of 1000mm, concrete grade of 35MPa, rebar grade of 500MPa, and axial load and bending moment of 1250t and 62.5tm respectively. The neutral axis was calculated to be at 891mm, resulting in maximum concrete compressive stress of 20.29MPa which exceeds the allowable limit of 17.5MPa. The maximum steel tensile stress of 80.8MPa is within the allowable limit of 375MPa.

Uploaded by

karthikmr85
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
213 views4 pages

Design of Pile-Stress - P214: 905 MM 7540 0.96 % Stress Check For Critical Load Case Load Comb

This document summarizes the design of a circular reinforced concrete pile using the working stress method. Key details include a pile diameter of 1000mm, concrete grade of 35MPa, rebar grade of 500MPa, and axial load and bending moment of 1250t and 62.5tm respectively. The neutral axis was calculated to be at 891mm, resulting in maximum concrete compressive stress of 20.29MPa which exceeds the allowable limit of 17.5MPa. The maximum steel tensile stress of 80.8MPa is within the allowable limit of 375MPa.

Uploaded by

karthikmr85
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Design of Pile-Stress -P214

Design Of Circular Cross Section ( Working Stress Method )


Grade of Concrete 35 MPa m 8.0
Grade of Steel 500 MPa s cbc 17.50 MPa
s st 375 MPa

Pile Dia 1000 mm


Area 785398 mm2
Cover to CG of Main Bar 95 mm
Dia of Bar 1st layer 20 mm 2nd Layer 20 mm
No of bars 1st layer 12 2nd Layer 12
Stirrup dia 10 mm
Effective depth 905 mm
Area of Reinforcement 7540 mm2 ~ 0.96 %
Stress Check for Critical Load case
P ( Axial Force ) 1250 t Load Comb :
M ( Bending Moment ) 62.5 tm
e 0.050 m
Radius of C/l Of Reinf. 405

Ast 7540 mm2

Neutral Axis Position (x) 891.0 mm


x/d 0.9845
thita 2.8922
CG from O (A) 0.003 x bar 1.6006 mm

Contact Area (B) 0.783 Area 8E+05 mm2

I0 ( C ) 0.776 Io 5E+10 mm4

Aeff 835623 mm2

Distance of CG eff from Physical Centroid


e' 1.5 mm
e-e' 48.5 mm

I eff 52799072628

Distance of Neutral Axis below CG eff


I eff / Aeff (e- e') 1302.78

Compared to 392.50 -910.3


( Goal Seek Function to be used Here, Variable Neutral Axis Posi
Maximum Compressive Stress in concrete 20.29 MPa > 17.50 NOT OK

Maximum Tensile Stress in steel 80.8 MPa < 375.00 OK


e Neutral Axis Position )
Design Of Circular Cross Section ( Working Stress Method )
Grade of Concrete 50 MPa m 5.6
Grade of Steel 500 MPa s cbc 25.00 MPa
s st 375 MPa

Column Dia 2000 mm


Area 3141593 mm2
Cover to CG of Main Bar 50 mm
Dia of Bar 1st layer 32 mm
No of bars 1st layer 48
2nd Layer 0 mm
2nd Layer 48
Stirrup dia 20 mm
Spacer bar dia 32 mm
Effective depth 1948 mm
Area of Reinforcement 38604 mm2 ~ 1.2288 %
Stress Check for Critical Load case
P ( Axial Force ) 1001 t Load Comb :
M ( Bending Moment ) 1019.0 tm
e 1.018 m
Radius of C/l Of Reinf. 950

Ast 38604 mm2

Neutral Axis Position (x) 771.3 mm


x/d 0.3960
thita 1.3612
CG from O (A) 0.539 x bar 538.87 mm

Contact Area (B) 0.289 Area 1E+06 mm2

I0 ( C ) 0.051 Io 5E+10 mm4

Aeff 1335264 mm2

Distance of CG eff from Physical Centroid


e' 467.2 mm
e-e' 550.8 mm

I eff 1.75438E+11

Distance of Neutral Axis below CG eff


I eff / Aeff (e- e') 238.55

Compared to 238.55 0.0


( Goal Seek Function to be used Here, Variable Neutral Axis P
Maximum Compressive Stress in concrete 23.78 MPa < 25.00 OK

Maximum Tensile Stress in steel -203.5 MPa < 375.00 OK


able Neutral Axis Position )

You might also like