1

LP > > > OBL_Metering Pumps

Plunger
Stroke: 50mm Metering Pump
Max flow rate: 5500 L/h
Motors: 2,2 - 3 - 4 - 5,5 - 7,5 kW
Positive Return API 675
LP pump is the largest pump of the "L" series and is
the fourth of the four sizes: LY-LK-LN-LP.
The stroke adjustment is based on OBL’s unique desi-
gn.

TECHNICAL DATA
PRESS.MAX BARBAR
MAX PRESSURE ATTACCHI
STROKES/m

FLOW RATE

TIPO PRESS.MAX BAR

INSTALL. POWER kW.
CONNECTIONS
ATTACCHI
TYPE
L/h

Type 0,25
AISIHP
316L 0,5 HPPVC UNI FLANGIATI ANSI
FLANGIATI
AISI2,2
316 PVC
3 4AISI 316I
2,2 PVC3 4 UNI P ANSI
A A P
CONSTRUCTION 50
68 0,5230 70 80 90 3/8"
LY6 70 1275 50 - 90 - - 15 1/2"
CHARACTERISTICS LP40 80
95
97 1,3340
65
55
80
70 80 - - -
G.F. 20 - 3
/ 4" -
118 420 50 65 80
50 1,5 3/8"
LY8 70
68 2,2380 50
45 10
55 65 - - 15 1/2"
95
80 3445 40 50 60 G.F.
LP50 97 540 35 45 55 10 - - 25 25 1” 1”
50
118 3650 28 36 45 3/8"
LY10 70 4 50 10 - - 15 1/2"
68
95 5,5650 28 36 40 G.F.
■ OBL‘s metering pumps are used in several industrial plants. The 80 750 25 32 40 1”
“L” series ranges from the smallest capacity, 400 cc/h, to the largest, LP65 50
97 6,5900 22 28 35 10 - 3/8"
- 40 40 1/2 2”
LY15 70
118 10
1100 40
17 10
22 27 - - 15 1/2"
11.000 L/h. 95 13 G.F.
68 950 20 26 27
50
80 12
1100 17 22 27 3/8" 1”
■ All models con be built as multiple units with different sized heads. LP80
LY20 70
97 18
1380 23
14 10
18 2250 10 10- - 401540 1/2"
1/2 2”
95
118 25
1650 11 14 17 G.F.

■ Each pumphead can have a different stroke rate since each has its 50
68 20
1500 12 15 15 10 10 3/8"
LY25 70
80 30
1800 15
10 10
13 1545 10 10
10 15 1/2"
1”
own reduction gear. LP100 95
97 40
2150 8 10 12 8 -
10 G.F. 40 40 1/2 2”
118
50 2700
30 7 9 1140 7 9
3/8"
■ Power transmission through multiple units is easily achieved by a LY30 70
68 43
2100 108 10 36
10 1033 8 10
10 10 15 1/2"
95
80 62
2500 7 9 10 7 9 G.F.
10
common motor-speed shaft, so the torque is lower than after the LP120 115 50 50 2" 2”
97 75
3200 5,5 7 9 30 5,5 7 9
reduction gears. 118 3800 5 6,5 8 5 6,5 8
50 55 22 1/2"
70
56 80
3000 6 20 6
■ Positive displacement mechanism with mechanical return of the
LY40 95
68 110
3700
5 5 6 18 10 6 15 1/2"
LP158 115
80 130
4500 - - 6 16 - -
G.F.
6 50 50 2” 2"
plunger, based on OBL’s unique design. 97 5500 5 5
50 90 14
56
70 3300
130 10 1113
■ Smooth flowrate adjustment by control knob, either with pump in LY50
LP120 68
95 4000
175 - 9- 1111 10 - 20 3/4"
80 4800 - 8 1010 - - - 50 50 2” 2"
motion or stationary. ADE 115 210
97 6000 7 9
DOUBLE - ACTING

50
118 155
7300 5,5 7
LY65 70
56 220
4200 - - 8 7 7 - 20 3/4"
LP135 95
68 300
5300 8 2" 2”
■ 1% repeatability of flowrate within 10% and 100% of maximum 80 6500 - - 8 - - - 65 65 1/2 1/2
ADE 50 210
97 8000 7
capacity. LY75 70
118 300
9700 - - 5,5 4 - - 25 1"
95
56 400
6000 6
LP160 68 7500 6 2” 2”
■ Low NPSH requirement: as low as 1,5m in recommended installa- ADE 80 9000 - - 6 - - - 65 65 1/2 1/2
tion conditions. 97 11000 5

OBL s.r.l. 20090 Segrate - MILANO Via Kennedy, 12 Tel. +39-02.269191 Fax +39-02.2133893 [email protected]
 2

LP > > > OBL_Metering Pumps

Stainless steel head "A"

PUMP HEADS execution flanged connec-
tions.

The standard construction, up to 420 L/h, has duplex ball valves;

higher flowrates have single valves.

- Materials of construction for wetted parts are:

■ Construction A: AISI 316L
■ Construction P: PVC-Ceramic - PTFE
PVC head, "P"execution,
flanged connections.
Pumps in other materials such as Hastelloy, other alloys, PVDF etc.,
can be supplied on demand.

- Plunger packing is of reinforced Teflon chevron rings.

- Suction and discharge connections are flanged.

■ Max. temperature of handled liquid:

- with standard stainless steel heads:120 °C
- with special stainless steel heads: 300 °C
- with stainless steel heads and ceramic plunger: 100 °C
- with PVC head: 40 °C
- with PVDF head: 70 °C

OVERALL DIMENSIONS MODEL NUMBER

REGOLAZIONE TIPO OROLOGIO GRAVITAZIONALE KEY TO SYMBOLS

GRAVITATIONAL CLOCK CONTROL SYSTEM PUMP TYPE
ø PLUNGER
A AISI-316L VERSION
P PVC VERSION
STROKES PER MINUTE

LP 100 A 97 FA Z.... Z... ELECTRIC ACTUATOR 4÷20 mA

650

W 3÷15 PSI PNEUMATIC ACTUATOR

545

F UNI-DIN FLANGED CONNECTIONS

FA ANSI FLANGED CONNECTIONS
A ... = 0 ÷ 10 BAR VERSION (NO NEED OF MODEL NO.)
210

TL = 10 ÷ 40 BAR
130

TN = 40 ÷ 100 BAR
15 35
150 100
B 250 Pump with gravitational
DN 300 clock control system.
25

165

14
220

270

220
25

350

220

AISI 316 PVC DN UNI 2223/29 ANSI B 16,5

TYPE
AISI: PVC: AISI PVC:
A ADV B BTL A B PN40 PN10 150RF 150RF

LP 40TN - 226 - 315 - - 20 - 3

/ 4" -
MATERIALS OF CONSTRUCTION
LP 50 TN 180 260 255 305 228 240 25 25 1" 1"
PARTS A P AC ACV H
LP 65 224 358 255 315 297 245 40 40 1 1/ 2" 2"
LIQUID END AISI 316L PVC AISI 316L AISI 316L AISI 316L
LP 65TL 224 358 - 315 - - 40 - 11/2" 300RF -
PLUNGER AISI 316L CERAMIC CERAMIC CERAMIC CERAMIC
LP 80 250 380 255 305 308 255 40 40 1 1/ 2" 2" VULKOLLAN
PACKING TEFLON/PTFE TEFLON/PTFE TEFLON/PTFE TEFLON/PTFE
POLYURETHAN
LP 100 275 - 255 270 334 255 40 40 1 1/ 2" 2"
VALVE SEAT AISI 316L PVC AISI 316L AISI 316L INCOLOY 825
LP 120 314 - 280 - 400 280 50 50 2" 2"
VALVE AISI 316L PIREX AISI 316L AISI 316L PIREX
LP 158 379 - 280 - 450 340 50 50 2" 2"
VALVE SEAL VITON/FPM VITON/FPM VITON/FPM VITON/FPM VITON/FPM

OBL s.r.l. 20090 Segrate - MILANO Via Kennedy, 12 Tel. +39-02.269191 Fax +39-02.2133893 [email protected]