Scribd
Upload
87 views

Paper-1 Imp Notes Tso-Specification: MADE BY SOHAIL KHAN (IIAE PUNE) Papar 1 Imp Notes

The document provides information on various aircraft systems and requirements including FDR, CVR, GPWS specifications and storage conditions for instruments and rubber parts. It also includes a list of Airworthiness Advisory Circulars covering topics like maintenance practices and aircraft modifications. The document appears to be notes made by an aviation student named Sohail Khan covering important aircraft specifications and regulations.

Uploaded by

Ajay Kumar Mahto
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
87 views

Paper-1 Imp Notes Tso-Specification: MADE BY SOHAIL KHAN (IIAE PUNE) Papar 1 Imp Notes

The document provides information on various aircraft systems and requirements including FDR, CVR, GPWS specifications and storage conditions for instruments and rubber parts. It also includes a list of Airworthiness Advisory Circulars covering topics like maintenance practices and aircraft modifications. The document appears to be notes made by an aviation student named Sohail Khan covering important aircraft specifications and regulations.

Uploaded by

Ajay Kumar Mahto
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

PAPER-1 IMP=NOTES

Tso-specification

(1) FDR = 51a fq- = ( 37.5 khz ) 90 days


(2) CVR = C-84
(3) GPWS = C-92 ( I/R)
(4) EGPWS &GCAS = C-151A
(5) FORWARD looking wind shear warning system = C-117
(6) ACAS = C-119 (R/V)
(7) A/C TRANSPONDER = C-74 (R/V)
(8) S-TRANSPONDER = C-112
(9) ELT = C=91a (fq- 121.5 ) / 48 hour

Temperature & humidity


1. Storange/shelf life of instrument ( series I-2 )
Temperature = 5 degree-25 degree
Humidity = not exceeding 70%
2. Clean room ( seriesn l -4)
Temperature = 20+2 degree
Humidity = 35 % to 50 %
3. Storange condition rubber parts
Temperature= 50 degree F – 70 degree F
Humidity = 65%

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


AIRWORTHINESS ADVISORY CIRCULARS

AAC 6 of 1998 - Grant of approval to Foreign Flight Engineer's Licence

AAC 7 of 1998 - Guidelines for procuring parts manufactured by parts manufacturing

approval holders (PMA)

AAC 3 of 2000 - Good Maintenance Practice

AAC 6 of 2000 - Handling of Electrostatic devices.

AAC 8 of 2000 - Refresher training for AME licence/ Approval & Certificate of

Competency holders

AAC 3 of 2001 - Banner Towing Operations

AAC 5 of 2001 - Engineering Statistics Report

AAC 4 of 2003 - Return to Service of Aircraft Items - Recovered from aircraft

involved in Accidents/ Incidents.

AAC 2 of 2004 - Routine Readout and maintenance of FDR/DFDR units installed on

Aircraf

AAC 3 of 2004 - Routine readout and maintenance of CVR Units installed on aircraft

AAC 3 of 2006 - Authenticity and Serviceability of Aircraft Parts

AAC 4 of 2006 - Airworthiness Approvals for Exports

AAC 2 of 2007 - Certification of transit inspection of an aircraft by other

organisations.

AAC 2 of 2011 - Categorization of Surveillance/ Audit findings.

AAC 1 of 2012- Duty Time Limitation – Aircraft Maintenance Personnel (AMP)

AAC 2 of 2012 - Maintenance of aircraft under CAR 145 approval and availability of

certifying staff

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


AAC 2 of 2013 Revision 1 - Modifications and Repairs

AAC 3 of 2013- EDTO Airworthiness Approval

AAC 4 of 2013 - Engine oil loss due to damage of 'O' ring of oil cap.

AAC 5 of 2013 - Validity of Certification Authorisation and AME license

AAC 1 of 2015 - Coding and Registration of ELTs

AAC 1 of 2016 - Check List of Current Airworthiness Advisory Circulars

AAC 2 of 2016 - Import/Export of Aircraft Spares, Items of Equipment etc. for use on

aircraft.

AAC 3 of 2016 - Direct Approval of Aircraft Maintenance Type Training

CAR-21 SUBPARTS
Subpart - A = General provisions
Subpart - B = TC & RTC
Subpart – C = N/A
Subpart- D = change of TC & RTC
Subpart – E = STC
Subpart – F = production without POA
Subpart – G = POA for product, parts & appliances
Subpart – H = C & A , R C of A , E C of A
Subpart – I = noise certificate
Subpart – JA = DOA product or change to product

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


Subpart – JB = DOA parts & appliances
Subpart – K = parts & appliances
Subpart – L = N / A
Subpart – M = repairs
Subpart – N = N/ A
Subpart –I = ITSO authorisation
Subpart – P = permit to fly
Subpart – Q = idenfication of parts & appliances product

CAR – M=SUBPART
Subpart – A = general
Subpart – B = accountability
Subpart – C = continuing airwothiness
Subpart – D = maintenance standard
Subpart – E = components
Subpart- F = maintenance Org.
Subpart- G= CAMO
Subpart- H = CRS
Subpart- I = ARC

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


CAR -145 PARTS
145.1 = General
145.A.05 = Applicability and Effectivity
145.A.10 = Scope
145.A.15 = Application
145.A.20 = Terms of Approval
145.A.25 = Facility Requirements
145.A.30 = Personnel Requirements
145.A.35 = Certifying Staff and support staff
145.A.40 = Equipment, tools and material
145.A.42 = Acceptance of Components
145.A.45 = Maintenance data
145.A.47 = Production planning
145.A.50 = Certification of maintenance
145.A.55 = Maintenance records
145.A.60 = Occurrence reporting
145.A.65 = Safety and Quality policy, maintenance
. procedures and quality system

145.A.70. = Maintenance organisation exposition

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


145.A.75 = Privileges of the organization
145.A.80 = Limitations on the organization
145.A.85 = Changes to the organization
145.A.90 = Continued validity
145.A.95 = Findings

MOE PARTS
PART 1 MANAGEMENT
PART 2 MAINTENANCE PROCEDURES
PART 2 ADDITIONAL LINE MAINTENANCE PROCEDURES
PART 3 QUALITY SYSTEM PROCEDURES
PART 3 Contracts with owners/operators.
PART 5 Appendices (sample of documents)
PART 7 Other Regulatory supplement
PART 8 – Reserved
PART 9- EASA

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


CAMO PARTS
Part 0 = General organisation
Part 1 = Continuing airworthiness procedures
Part 2 = Quality system or organisational review
Part 3 = Contracted maintenance
Part 4 = Airworthiness review procedures
ADDITIONAL---
Part 0 = General organisation
Part 6 = Continuing airworthiness management procedures
Part 9 = Airworthiness review procedures

CAR- 147 SUBPART


SUBPART A - GENERAL
SUBPART B - ORGANISATIONAL REQUIRMENTS
SUBPART C - AIRCRAFT BASIC TRAINING
SUBPART D - AIRCRAFT TYPE/TASK TRAINING

MTOE=PARTS
PART 1 – MANAGEMENT
PART 2 - TRAINING AND EXAMINATION PROCEDURES
PART 3 - TRAINING SYSTEM QUALITY PROCEDURES
PART 4 – APPENDICES

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


FIGHT TEST

SINGLE ENGINE A/C TWIN ENGINED A/C PRIVATE CAT. A/C

TOTAL FLYING 500 HOURS 1000 hours 500 hours


TIME

PIC ON TYPE 100 hours 100 hours 100 hours


WITHIN 6 10 hours 10 hours 10 hours
MONTHS

PIC ON A/C - 500 hours 200 hours

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


IMPORTANT
CA-FORM
CA-FORM-1 = Authorized release certificate
CA-FORM-2 = Application for the issue or variation of approval ( appdex-vii )
CA-FORM-3 = Approval schedule /certificate (appdex-III)
CA-FORM-4 = Acceptance of post holder (appdex-V)
CA-FORM-6 = Approval recommendation report (appdex-VI)
CA-FORM-12 = Approval intial /change of approval
CA-FORM-13 = M.A. Subpart G approval recommendation report
CA-FORM-14 = CAMO approval /certificate/schedule
CA-FORM-15a = Airworthiness review certificate (issue DGCA)
CA-FORM-15b = Airworthiness review certificate ( issue CAMO)
CA-FORM-20 = Permit to fly
CA-FORM-21 = Flight conditon for a permit to fly
CA-FORM-22 = Application for permit to fly
CA-FORM-23 = Certificate of Airworthiness
CA-FORM-24 = Restricated C of A
CA-FORM-25 = Application for certificate of airworthiness
CA-FORM-28 = Application for registration of aircraft/microlight
CA-FORM-30 = Application for type certificate/ restricated type certificate

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


CA-FORM-31 = Application for approval major change/major repair design
CA-FORM-32 = Application for approval minor chane / minor repair design
CA-FORM-33 = Application for approval of STC
CA-FORM-34 = Application for ITSOA
CA-FORM-35 = Statement of comliance for ITSOA
CA-FORM-45A = Noise certificate
CA-2006-1A = Application for issue of noise certificate
CA-FORM-50 = Application for production Org. approval
CA-FORM-51 = Application for significant change or variation of scope &term of
POA under Subpart-G
CA-FORM-52 = Aircraft statement of comformity
CA-FORM-53 = Certificate of release to service
CA-FORM-55 = Production Org. approval certificate
CA-FORM-60 = Application for agreement of production under CAR-21SubpartF
CA-FORM-65 = Production without POA Letter of agreement
CA-FORM-80A = Applicaton for DOA/renewal of DOA under CAR-21 SubpartJA
CA-FORM-80B = Applicaton for DOA/renewal of DOA under CAR-21 SubpartJB
CA-FORM-81 = Application for alternative procedures to DGCA
CA-FORM-82A = Application for significant change to DOA under CAR-21
. Subpart-JA

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


CA-FORM-82B = Application for significant change to DOA under CAR-21
. Subpart-JB
CA-FORM-83 = Certificate of Erection
CA-FORM-84 = Certificate of flying test
CA-FORM-6F = M.A. Subpart-F approval recommendation report
CA-FORM-2F = Application for issue or variation of approval/initial grant
CA-FORM-182/182A = Application for approval of indian Org.
CA-FORM-182B = Application for renewal for approval of indian Org.
CA-FORM 68a = Renewal of licence of AME

CAR-147
CA-FORM-11 = Maintenance training Org. approval Certificate
CA-FORM-149 = Certificate of recognition
CA-FORM-04 = Application formet for nominating post holder
CA-FORM-12 = Application for intial / change of approval
CA-FORM-22 = Approval recommendation report

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes


CAR-66
CA-FORM 19-01 = Application For Initial Issue Of CAR-66 Aircraft Maintenance
Engineer’s Licence

CA-FORM 19-02 = Application for extension of CAR- 66aircraft maintenance


engineer’s licence
CA-FORM 19-03 = Application for renewal of CAR- 66aircraft maintenace
engineer’s licence

CA FORM 19-04 = Application for conversion/removal oflimitations of CAR-66


aircraft maintenance engineer’slicence
CA-FORM 19-05 = Application for issue of duplicate CAR-66 aircraft
maintenance engineer’ s licence

CA-FORM 19-06 = Medical certificate

CA-FORM 19-07 = Application for allotment of computernumber for appearing in


AMElicence Examinations

CA-FORM 19-08A = Application for appearing in writtenpaper(s) of CAR 66


basic knowledge examination
CA-FORM 19-08B = Application for appearing in CAR 66type examination

CA-FORM 19-09 = Application for appearing in skill testof CAR-66 AME licence

MADE BY= SOHAIL KHAN (IIAE PUNE) Papar=1 imp notes

You might also like