LIWA

The simple lightweight steel panel formwork

with the cleverly-devised corner panel

Product Brochure
Content

LIWA system advantages System overview

2 The simple lightweight steel 10 LIWA at a glance
panel formwork with the
cleverly devised corner panel Standard applications and
4 Very few different components execution details
6 Simple design 12 Panel connections, formwork
7 Can also be used without a alignment
crane 14 Stopend formwork, transport
8 Ingenious system for corners, aids, working and concreting
wall connections and T-junctions scaffolds

Edition 09 | 2016

Publisher

PERI GmbH
Formwork Scaffolding Engineering
Rudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950-0
Fax +49 (0)7309.951-0
info @peri.com
www.peri.com
 Components
16 LIWA components

Important notes

All current laws, guidelines and safety regulations r­ educed to show certain aspects. The safety in-
must be observed in those countries where our stallations which have possibly not been shown in
products are used. these detailed descriptions must nevertheless be
available. The systems or items shown might not
The photos shown in this brochure feature con- be available in every country.
struction sites in progress. For this reason, safety
and anchor details in particular cannot always be Safety instructions and load specifications are to
considered as conclusive or final. These are sub- be strictly observed at all times. Separate structur-
ject to the risk assessment carried out by the con- al calculations are required for any deviations from
tractor. the standard design data.

In addition, computer graphics are used which are The information contained herein is subject to
to be understood as system representations. For technical changes in the interests of progress.
ensuring a better understanding, these and the ­Errors and typographical mistakes reserved.
detailed illustrations shown have been partially

1
System advantages

LIWA
The simple lightweight steel panel formwork with the
cleverly-devised corner panel

LIWA is the lightest PERI steel panel LIWA's standard configuration is used for wall thicknesses from 15 cm to 40 cm.
formwork and deliberately dis- The system is designed for a fresh concrete pressure of 50 kN/m² according to
pensed with more elaborate equip- DIN 18218 (evenness: line 6 in accordance with DIN 18202). The perforated strip
ment features in favour of lower in- with all standard panels increases the system's range of applications as, through
vestment costs. LIWA has only a this, the panels can also be used, among other things, for beams, foundations
minimum of different panel ele- and columns. This simultaneously optimizes work preparation and storage of ma-
ments. In addition, the perforated terials.
strip allows each panel to be used as
a multi-purpose panel. This means Through the construction with a flat steel frame, LIWA has a very small overall
that corners and columns can also height of 10 cm. Among other things, this has a positive effect regarding trans-
be formed without requiring any port volumes.
special panels. LIWA is a market-
oriented solution if, for example, For panel connections, there are different system components available. The easy
users are working with system form- to handle Wedge Clamp is used for standard panel connections whilst the Wedge
work for the first time. Clamp Compensation allows compensations up to 5 cm thick. For higher require-
ments, the LRS Alignment Coupler ensures flush and even connections.

2
 System advantages

Very few different components Simple design

Only 4 panel widths, and each standard panel is With powder-coated flat steel frames, a minimum of
simultaneously a multi-purpose panel formwork guidelines and simple connecting means

Can also be used without a crane Cleverly-devised system for corners,

wall connections and T-junctions
Can be installed by hand – also the 75 Panel
Geometrical adjustments with very few components

3
System advantages

Very few different components

Each standard panel is simultaneously a multi-purpose panel

All LIWA panels are fitted with an end-to-end perforated

strip. As a result, each panel can also be used for columns
as well as corner panels. Thus, the LIWA system contains
a very small number of panelised components.

Fewer system components means not only less investment

costs. Rather, a smaller number of individual components
in day-to-day activities brings numerous advantages. Then,
from work preparation and logistics through to handling on
the construction site, workloads are reduced thus saving on
costs.

With LIWA, each anchor strut has an end-to-end perforated

strip with 5 cm spacings between the anchor holes. Each
standard panel can therefore also be used for foundations,
parapets, beams and columns. A Multi Panel with a 75 cm
width complements the range of LIWA panelized elements.

LIWA panels can also be used

horizontally for the construction
of foundations. Instead of a bot-
tom row of ties, the Foundation
Tie Clamp and Perforated Foun-
dation Tie are used. At the top,
panels are held in position with
the top tie bracket and tie rod.
The Brace Connector-2 can be
mounted on the horizontally-­
positioned panels.

With the Multi Panel LWM 75, column cross-sections from 15 cm up

to 55 cm can be formed in 5 cm increments. The panels are assem-
bled by means of corner connectors.

4
 System advantages

An overview of the LIWA range of panels shows the reduced number of individual
panels: with only four panel widths and one multi-purpose panel, LIWA provides
the appropriate programme for standard heights up to 3.00 m. The standard con-
figuration provides extensions up to 3.85 m using horizontal panels. The corner
panel can be used very flexibly in straight wall sections, internal corners and
T-junctions.

Width [cm]
75 60 50 40 LWM 75 Corner 25
300
Height [cm]
250
150
75

5
System advantages

Simple design
With powder-coated flat steel frames, a minimum of
­formwork guidelines and simple connecting means

LIWA deliberately dispenses with

elaborate designs and equipment in
favour of cost-effectiveness – how-
ever, not at the expense of applica-
tion diversity or quality.

With a small range of different panels,

fewer formwork guidelines and easy to
mount couplers, LIWA is very simple
to plan and use. Apart from the panels
and corner panels, any additional com-
ponents are kept to an absolute mini-
mum. This simplifies work preparation
as well as numerous other work proce-
dures on the jobsite.

As a result, LIWA is suitable, among

other things, for those users who are
working with steel system formwork
for the first time.

The details clearly show the uncomplicated design The simply designed Brace Connector can be
of the components: the narrow flat steel frame is mounted to vertical LIWA panels. For aligning hori-
connected using a simple Wedge Clamp. zontally-positioned panels, e.g. with foundations,
the Brace Connector-2 is used.

6
 System advantages

Can also be used without a crane

Can be installed by hand – also the 75 Panel

Due to the construction using a flat

steel frame, the weight of the LIWA
panels is substantially lower than
with other standard panel formwork
with welded hollow profiles. There-
fore, LIWA can be erected by hand.

If there is no crane capacity on the job-

site or crane operation times have to
be reduced, LIWA can also be installed
manually. For lifting the formwork, the
LIWA Lifting Pin is used which is sim-
ply attached to the connection holes on
the panels.

The Lifting Pin can also be used to perfectly

align the LIWA panels: it is simply mounted in
the connection holes on the panels after which
timbers are inserted.

7
System advantages

Cleverly-devised system for corners, wall connections

and T-junctions
Geometrical adjustments with very few components

All required adjustments for

right-angled and obtuse corners,
T-junctions as well as obtuse wall
connections can be realized with
very few system components.

The ingenious corner panel with a

width of 25 cm makes an important
contribution for reducing the number
of system components. The corner
panel is used on internal formwork for
90° corners as well as T-junctions. Wall
offsets can also be constructed with
the corner panel without requiring any
conventional solutions using timbers.

The Multi Panel is used as external

formwork for realizing 90°corners and
no special corner panels are required in
this case.

With only a minimum of system components,

all geometrical adjustment requirements such
as right-angled and obtuse corners as well as
T-junctions can be realized with LIWA.

The corner connector is used for constructing 90° corners can be continuously executed for all wall thicknesses. In the process, the multi panel is
external corners along with columns. always used externally whilst the LIWA Corner Panel with a width of 25 cm is utilized internally.

8
 System advantages

With the LIWA Articulated Corner, obtuse

corners from 75° to 165° are formed;
thereby compensation walers are to be
mounted on the external corners.

T-junctions can also be continuously formed. For this, the corner panel is
used internally and, if required, a compensation waler.

9
System overview

LIWA at a glance
Standard applications and execution details

10
 System overview

The special features of the light-

weight LIWA Steel Panel Form-
work are the very simple applica-
tion and low weight. At the same
time, the system provides solu-
tions for all panel connections
whilst requiring only a minimum
of additional components, neces-
sary geometrical adjustments as
well as regarding the safety of the
user. The following pages feature
standard applications and execu-
tion details.

11
Standard applications

Standard applications and execution details

Panel connections, formwork alignment

Panel connections with LIWA couplers

The lightweight and easy to handle

LIWA Wedge Clamp is used on
standard panel joints as well as for
internal corners. For heights of 3.00 m,
panels require only three wedge
clamps whilst only 2 clamps are
needed for panel heights of 2.50 m.

The Wedge Clamp Compensation

LIWA is used for wall compensations
up to 5 cm wide. Either timbers or the
5 cm wide Wall Thickness Compen-
sation are used for the compensation
area. In addition, the wedge clamp
compensation can be used for stand-
ard panel joints.

For aligning LIWA panels, the LRS

Alignment Coupler is used. It can be
used for standard panel joints, ex-
tensions, and length compensations
up to 5 cm. When the wedge is
hammered in, the LIWA panels are
flush and aligned as well as being
pulled tightly together. Alternatively,
the panels are perfectly aligned us-
ing the lifting pin and timbers, or
with timbers and formwork girders.

12
 Standard applications

Panel connections with compensation walers

For longitudinal compensations up

to 25 cm as well as extensions, the
Compensation Waler LWR 60 is
used as a bracing, aligning and
force-transmitting panel connection.

When using the articulated corner,

the Compensation Waler LWR 60
takes on a bracing function on the
adjoining LIWA panel.

The compensation waler for compensations up to Extensions up to heights of 3.85 m are possible
25 cm with timber infill and filler plate. with horizontal LIWA panels. The compensation
waler provides the required transfer of forces
as well as bracing.

Aligning with push-pull props

In order to align the formwork and

secure against wind loads, push-pull
props with kickers are mounted. For
fixing the push-pull props to vertical
panels, a brace connector is availa-
ble which is simply inserted into the
anchor strut and secured with a
bolts and cotter pins.

For use on horizontal panels with

extensions as well as strip founda-
tions, the Brace Connector-2 is avail-
able which can be attached to both
the horizontal and vertical struts. The simply designed LW Brace Connector for use
on vertically-positioned panels can be attached to
the anchor struts by means of bolts and cotter pins.

13
Standard applications

Standard applications and execution details

Stopend formwork, transport aids, working and
concreting scaffolds

Stopend formwork

Stopend formwork can be continu-

ously realized with timber, filler
plates and the Walers LWR 80.
­Alternatively, the LIWA Multi Panel
can be used.

The simple stopend formwork with timber and

filler plates.

The LIWA Multi Panel can also be

used for stopend formwork.

Transport aids

For lifting the LIWA panels without

the use of a crane, an easy to use
lifting pin is available. For moving the
panels by crane, crane lifting gear with
a load-bearing capacity of 300 kg is
used.

14
 Standard applications

Working and concreting scaffolds

With scaffold brackets and Guardrail

Posts HSGP-2, 80 cm wide working
and concreting scaffolds can be
mounted to the LIWA panels. In the
process, the scaffold brackets can
be attached to both the horizontal
and vertical struts – can therefore
also be used with extended panels.

For realizing the guardrails opposite,

Guardrail Posts LIWA are used.
These are slid over the profile and
then secured by means of bolts and
cotter pins.

15
LIWA Panel Formwork
Item no. Weight kg
116878  77.900 Panel LW 300 x 75
Panel with 12 mm plywood.

500
1000
3000
1000
750
25 14x50 = 700 25

500

100
116906  66.400 Panel LW 300 x 60
Panel with 12 mm plywood.

500
1000
3000
1000

600
25 11x50 = 550 25
500

100

116916  59.400 Panel LW 300 x 50

Panel with 12 mm plywood.
500
1000
3000
1000

500
25 9x50 = 450 25
500

100

16
LIWA Panel Formwork
Item no. Weight kg
116923  52.500 Panel LW 300 x 40
Panel with 12 mm plywood.

500
1000
3000
1000
400
25 7x50 = 350 25

500

100
116984  77.900 Multi Panel LWM 300 x 75
Panel with 12 mm plywood.
For oblique angels, wall connections etc.

500
1000
3000
1000

750
25 14x50 = 700 25
500

100
116930  45.200 Corner Panel LW 300 x 25
For 90° internal corners.
500
1000
3000
1000

250
25 4 x 50 25
500

100

17
LIWA Panel Formwork
Item no. Weight kg
117209  34.700 Articulated Corner LIWA 300
Alu panel with aluminium formlining. For oblique
angles from 75°, can be used internally and
externally.

3000
200 200

100
117364  13.900 Wall Thickness Comp. LW 300 x 5
For adjusting to wall thicknesses.

500
1000
3000
1000

10 50
500

100

117717  65.400 Panel LW 250 x 75

Panel with 12 mm plywood.
500
1500
2500

750
25 14x50 = 700 25
500

100

18
LIWA Panel Formwork
Item no. Weight kg
117721  55.500 Panel LW 250 x 60
Panel with 12 mm plywood.

500
1500
2500
600
25 11x50 = 550 25

500

100
117725  49.700 Panel LW 250 x 50
Panel with 12 mm plywood.

500
1500
2500

500
25 9x50 = 450 25
500

100

117730  43.900 Panel LW 250 x 40

Panel with 12 mm plywood.
500
1500
2500

400
25 7x50 = 350 25
500

100

19
LIWA Panel Formwork
Item no. Weight kg
117738  65.200 Multi Panel LWM 250 x 75
Panel with 12 mm plywood.
For oblique angles, wall connections etc.

500
1500
2500
750
25 14x50 = 700 25

500

100
117736  37.800 Corner Panel LW 250 x 25
For 90° internal corners.

500
1500
2500

250
25 4 x 50 25
500

100

124006  29.100 Articulated Corner LIWA 250

Alu panel with aluminium formlining. For oblique
angles from 75°, can be used internally and
externally.
2500

200 200
100

20
LIWA Panel Formwork
Item no. Weight kg
117746  11.600 Wall Thickness Comp. LW 250 x 5
For adjusting to wall thicknesses.

500
1500
2500
10 50

500

100
117013  42.900 Panel LW 150 x 75
Panel with 12 mm plywood.

250
1000
1500
750
25 14x50 = 700 25

250

100
117024  36.000 Panel LW 150 x 60
Panel with 12 mm plywood.
250
1000
1500

600
25 11x50 = 550 25
250

100

21
LIWA Panel Formwork
Item no. Weight kg
117107  32.100 Panel LW 150 x 50
Panel with 12 mm plywood.

250
1000
1500
500
25 9x50 = 450 25

250

100
117111  28.300 Panel LW 150 x 40
Panel with 12 mm plywood.

250
1000
1500
400
25 7x50 = 350 25

250

100
117029  42.900 Multi Panel LWM 150 x 75
Panel with 12 mm plywood.
For oblique angles, wall connections etc.
250
1000
1500

750
25 14x50 = 700 25
250

100

117510  23.600 Corner Panel LW 150 x 25

For 90° internal corners.
250
1000
1500

250
25 4 x 50 25
250

100

22
LIWA Panel Formwork
Item no. Weight kg
117275  17.500 Articulated Corner LIWA 150
Alu panel with aluminium formlining. For oblique
angles from 75°, can be used internally and
externally.

1500
200 200

100
117367   7.140 Wall Thickness Comp. LW 150 x 5
For adjusting to wall thicknesses.

250
1000
1500
10 50

100
250

117125  24.800 Panel LW 75 x 75

Panel with 12 mm plywood.

750
25 14x50 = 700 25
500
750
250

100
117136  20.300 Panel LW 75 x 60
Panel with 12 mm plywood.

600
25 11x50 = 550 25
500
750
250

100

117140  18.100 Panel LW 75 x 50

Panel with 12 mm plywood.

500
25 9x50 = 450 25
500
750
250

100

23
LIWA Panel Formwork
Item no. Weight kg
117144  15.900 Panel LW 75 x 40
Panel with 12 mm plywood.

400
25 7x50 = 350 25

500
750
250

100
117146  24.700 Multi Panel LWM 75 x 75
Panel with 12 mm plywood.
For oblique angles, wall connections etc.

750
25 14x50 = 700 25

500
750
250

100
117541  12.600 Corner Panel LW 75 x 25
For 90° internal corners.

250
25 4 x 50 25
500
750
250

117370   3.760 Wall Thickness Comp. LW 75 x 5 100

For adjusting to wall thicknesses.

10 50
500
750

100
250

117573   1.120 Wedge Clamp LIWA

For standard panel connections.
24
126
160

97

117677   2.000 Wedge Clamp Compensation LIWA

For compensations up to 5 cm thickness.
24
136
211

161

24
LIWA Panel Formwork
Item no. Weight kg
127460   3.920 LIWA Alignment Coupler LRS
For compensations up to 5 cm theckness.

61
max 144 40

131
288 259

118612   1.160 Chamfer Strip LIWA l = 3.00 m

118
28

117320   4.880 Compensation Waler LWR 60 Technical Data

For longitudinal compensation and stopends with Permissible bending moment 1.38 kNm.
LIWA. Maximum compensation width 25 cm.
20

165
60
20

630 173

118380   3.810 Waler LWR 80 Technical Data

For stopend formwork. Permissible bending moment 1.38 kNm.
20
60
20

800 60

25
LIWA Panel Formwork
Item no. Weight kg
125473  18.400 Waler 170 Technical Data
For bracing the formwork if you use the articulated Permissible bending moment 3.9 kNm.
corner ≤ 120°.

1700 80

30
115
36
112080   1.130 Corner Connector-2, LIWA
For external corners and columns.

70
136 80

117169   1.520 Brace Connector LIWA Complete with

For connecting push-pull props and kicker braces 1 pc. 027170 Pin Ø 16 x 42, galv.
to LIWA Panels. 1 pc. 105400 Pin Ø 20 x 140, galv.
2 pc. 018060 Cotter Pin 4/1, galv.

Ø16x42
159

Ø17

21 Ø20x140 134

125329   3.050 Brace Connector-2 LIWA Complete with

For connecting push-pull props and kicker braces 1 pc. 027170 Pin Ø 16 x 42, galv.
to LIWA Panels. Mounted on vertical and horizon- 1 pc. 018060 Cotter Pin 4/1, galv.
tal struts.
96

Ø16x42

375 167

26
LIWA Panel Formwork
Item no. Weight kg
117354   6.470 Scaffold Bracket LW 80 Technical Data
For assembly of a working and concreting scaffold Permissible load 150 kg/m2.
with LIWA. Mounted on horizontal and vertical Maximum width of influence 1.50 m.
struts.

981 100
830 45

50

733
Accessories
116292   4.720 Guardrail Post HSGP-2

116292   4.720 Guardrail Post HSGP-2

As guardrail for different systems.

120
450
1050
1300
65 35

125448   0.774 Tie Bracket LIWA

For grid-independent anchoring outside of the
panel, especially for foundations.
90

Ø20
110 100

117231   2.230 Foundation Tie Clamp LIWA

For anchoring foundation formwork in combination
with the Perforated Foundation Tie.

116

SW14
62
173

27
LIWA Panel Formwork
Item no. Weight kg
023020   0.676 Perforated Foundation Tie, 25 m Technical Data
For use with Foundation Tie Clamp TRIO, Permissible tension force 12.9 kN.
DOMINO, LIWA and HANDSET.

50
20
50 22

117747   5.230 Crane Hook LIWA Note

For transporting LIWA panels. Follow Instructions for Use!
Technical Data
Permissible load-bearing capacity 300 kg.

439
49

146 199

115560   0.029 Stacking Aid LIWA 45

45 45

117931   1.460 Lifting Pin LIWA

For vertical transportation of the elements or
aligning the formwork with timbers up to 8 cm.

Ø18
156

393

125229   1.630 Timber Holder LIWA

For aligning LIWA panels with timbers or
girders VT 20, GT 24.

Ø16
272

332

28
LIWA Panel Formwork
Item no. Weight kg
125100   5.160 Guardrail Post LIWA
For assembling a guardrail on LIWA panels.

12 0
44 0
1 34 9
65

1315
35

75
°
117466  10.600 Push-Pull Prop RS 210, galv. Note
Extension length l = 1.30 – 2.10 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.

min 1300 max 2100

Ø48,3

Ø21 Ø17

Ø 60,6
1178

9
118238  12.100 Push-Pull Prop RS 260, galv. Note
Extension length l = 2.30 – 2.60 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.

min 2300 max 2600

Ø48,3

Ø17
Ø 60,6

Ø21
2178
9

29
LIWA Panel Formwork
Item no. Weight kg
117467  15.500 Push-Pull Prop RS 300, galv. Note
Extension length l = 1.90 – 3.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.

min 1900 max 3000

Ø48,3

Ø21 Ø17

Ø64,5
1773

9
117468  23.000 Push-Pull Prop RS 450, galv. Note
Extension length l = 2.80 – 4.50 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.

min 2800 max 4500

Ø48,3

Ø17

Ø 73
Ø21
2670

9
117469  39.900 Push-Pull Prop RS 650, galv. Note
Extension length l = 4.30 – 6.50 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.

min 4300 max 6500

Ø48,3

Ø17
Ø 88,9

Ø21
4140

028990 115.000 Push-Pull Prop RS 1000, galv. Note

Extension length l = 6.40 – 10.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.

min 6325 max 10000

Ø48,3 Ø17

Ø21 Ø21
Ø 102

10

30
LIWA Panel Formwork
Item no. Weight kg
103800 271.000 Push-Pull Prop RS 1400, galv. Note
Extension length l = 6.40 – 14.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems. Chain can be operated from bottom.

min 6400 max 14000

6460

17 x 200 = 3400 17 x 200 = 3400

Ø21 Ø21
Ø17
Ø48,3 Ø48,3

10
400 400

117343   3.250 Base Plate-2 for RS 210 – 1400, galv. Complete with
For assembly of Push-Pull Props RS 210, 260, 2 pc. 105400 Pin Ø 20 x 140, galv.
300, 450, 650, 1000 and 1400. 2 pc. 018060 Cotter Pin 4/1, galv.

106
Ø21
52
261 64

Accessories
124777   0.210 Anchor Bolt PERI 14/20 x 130

126666   3.070 Base Plate-3 for RS 210 - 1400 Complete with

For assembly of Push-Pull Props RS 210, 260, 2 pc. 105400 Pin Ø 20 x 140, galv.
300, 450, 650, 1000 and 1400. 2 pc. 018060 Cotter Pin 4/1, galv.
1 pc. 113063 Bolt ISO 4014 M12 x 80-8.8, galv.
1 pc. 113064 Hex Nut ISO7042-M12-8-G, galv.
105

Ø21

264 52
64

Accessories
124777   0.210 Anchor Bolt PERI 14/20 x 130

31
LIWA Panel Formwork
Item no. Weight kg
028010  17.900 Push-Pull Prop RSS I Note
Extension length l = 2.05 – 2.94 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.

min 2050 max 2940

Ø32

Ø70
Ø16,5
1915

10
113397   1.600 Spindle Handle RSS / AV Complete with
Spindle handle for screwing on Push-Pull-Props 2 pc. 722342 Screw ISO 4017 M8 x 25-8.8, galv.
RSS I, RSS II and Kickers AV 210 and AV RSS III. 2 pc. 711071 Nut ISO 7042 M8-8, galv.

179
196 130

028020  22.000 Push-Pull Prop RSS II Note

Extension length l = 2.91 – 3.80 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.

min 2910 max 3800

Ø32
Ø 70

Ø16,5 Ø16,5
2775
15

10

Accessories
113397   1.600 Spindle Handle RSS / AV

028030  38.400 Push-Pull Prop RSS III Note

Extension length l = 4.60 – 6.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.

min 4600 max 6000

Ø48,3
Ø82,5

Ø16,5 Ø16,5
4399
15

32
LIWA Panel Formwork
Item no. Weight kg
106000   1.820 Base Plate-2 for RSS, galv. Complete with
For assembly of Push-Pull Props RSS. 1 pc. 027170 Pin Ø 16 x 42, galv.
1 pc. 018060 Cotter Pin 4/1, galv.

Ø11

85
Ø21

12
150 100

Accessories
124777   0.210 Anchor Bolt PERI 14/20 x 130

Kickers AV min. L max. L

057087   3.720 Kicker AV 82 500 820
057088   4.410 Kicker AV 111 790 1110
For aligning PERI formwork systems. Complete with
1 pc. 027170 Pin Ø 16 x 42, galv.
1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 500 max 820

min 790 max 1110
Ø30

Ø38
Ø16,5 Ø16x42

390
690

10
10

028110   5.180 Kicker AV 140 Complete with

Extension length l = 1.08 – 1.40 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI formwork systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 1080 max 1400

Ø30
Ø 38

Ø16,5 Ø16x42

980
10

10

33
LIWA Panel Formwork
Item no. Weight kg
108135  12.900 Kicker AV 210 Complete with
Extension length l = 1.28 – 2.10 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI formwork systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 1280 max 2100

Ø36

Ø 70
Ø16x42 Ø16,5
1171

10
10
Accessories
113397   1.600 Spindle Handle RSS / AV

028120  17.000 Kicker AV RSS III Complete with

Extension length l = 2.03 – 2.92 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI formwork systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.

min 2030 max 2920

Ø32

Ø70
Ø16x42 Ø16,5
1915
10

10
Accessories
113397   1.600 Spindle Handle RSS / AV

124777   0.210 Anchor Bolt PERI 14/20 x 130 Note

For temporary fixation to reinforced concrete See PERI data sheet!
structures. Drilling Ø 14 mm.

SW 24
Ø14
130

34
35
 PERI International

RU
CA

KZ

US AZ TM KR JP
TN LB
MA IL JO IR
KW
MX DZ EG QA HK
SA AE IN
OM
TH VN
PH
PA NG
CO MY
SG
ID
TZ
PE BR
AO MZ

NA
BW
CL
AU
ZA
AR

NZ

North America Africa Asia

CA
Canada AO
Angola AE
United Arab Emirates KZ
Kazakhstan
PERI Formwork Systems, Inc. Pericofragens, Lda. PERI (L.L.C.) TOO PERI Kazakhstan
www.peri.ca www.peri.pt www.perime.com www.peri.kz

MX Mexico DZ
Algeria AZ
Azerbaijan LB
Lebanon
PERI Cimbras y Andamios, S.A. de C.V. S.A.R.L. PERI PERI Repesentative Office PERI Lebanon Sarl
www.peri.com.mx www.peri.dz www.peri.com.tr [email protected]

PA
Panama BW
Botswana HK
Hong Kong MY
Malaysia
PERI Panama Inc. PERI (Proprietary) Limited PERI (Hong Kong) Limited PERI Formwork Malaysia Sdn. Bhd.
www.peri.com.pa www.peri.co.bw www.perihk.com www.perimalaysia.com

US
USA EG
Egypt ID
Indonesia OM
Oman
PERI Formwork Systems, Inc. Egypt Branch Office PT Beton Perkasa Wijaksana PERI (L.L.C.)
www.peri-usa.com www.peri.com.eg www.betonperkasa.com www.perime.com

MA
Morocco IL
Israel PH
Philippines
PERI S.A. PERI F.E. Ltd. PERI-Asia Philippines, INC.
South America www.peri.ma www.peri.co.il www.peri.com.ph

AR
Argentina MZ
Mozambique IN
India QA
Qatar
PERI S.A. PERI (Pty.) Ltd. PERI (India) Pvt Ltd PERI Qatar LLC
www.peri.com.ar www.peri.co.mz www.peri.in www.peri.qa

BR
Brazil NA
Namibia IR
Iran SA Saudi Arabia
PERI Formas e Escoramentos Ltda. PERI (Pty.) Ltd. PERI Pars. Ltd. PERI Saudi Arabia Ltd.
www.peribrasil.com.br www.peri.na www.peri.ir www.peri.com.sa

CL
Chile NG
Nigeria JO
Jordan SG
Singapore
PERI Chile Ltda. PERI Nigeria Ltd. PERI GmbH – Jordan PERI Asia Pte Ltd
www.peri.cl www.peri.ng www.peri.com www.periasia.com

CO
Colombia TN
Tunisia JP
Japan TM
Turkmenistan
PERI S.A.S. PERI S.A.U. PERI Japan K.K. PERI Kalıp ve İskeleleri
www.peri.com.co www.peri.es www.perijapan.jp www.peri.com.tr

PE
Peru TZ
Tanzania KR
Korea TH
Thailand
PERI Peruana S.A.C. PERI Formwork and Scaffolding Ltd PERI (Korea) Ltd. Peri (Thailand) Co., Ltd.
www.peri.com.pe www.peritanzania.com www.perikorea.com www.peri.co.th

ZA South Africa KW
Kuwait VN
Vietnam
PERI Formwork Scaffolding (Pty) Ltd PERI Kuwait W.L.L. PERI ASIA PTE LTD
www.peri.co.za www.peri.com.kw www.peri.com.vn

36
 IS

FI
NO

SE EE RU

LV
IR DK
LT
GB
BY
NL
PL
BE DE
LU
CZ UA

PERI GmbH SK
FR
Formwork Scaffolding Engineering CH AT
HU
Rudolf-Diesel-Strasse 19
SI
89264 Weissenhorn RO
IT
Germany
HR BA
Tel. +49 (0)7309.950-0 PT RS
ES
Fax +49 (0)7309.951-0 BG
[email protected]
www.peri.com
AL
GR TR

Oceania
AU
Australia DE
Germany IS
Iceland RU
Russia
PERI Australia Pty. Ltd. PERI GmbH Armar ehf. OOO PERI
www.periaus.com.au www.peri.de www.armar.is www.peri.ru

NZ
New Zealand DK
Denmark IT
Italy SE
Sweden
PERI Australia Pty. Limited PERI Danmark A/S PERI S.r.l. PERI Sverige AB
www.peri.co.nz www.peri.dk www.peri.it www.peri.se

EE
Estonia LT
Lithuania SI
Slovania
PERI AS PERI UAB PERI oplate i skele d.o.o
Europe www.peri.ee www.peri.lt www.peri.com.hr

AL
Albania ES
Spain LU
Luxembourg SK
Slovakia
PERI Kalıp ve İskeleleri PERI S.A.U. N.V. PERI S.A. PERI spol. s. r.o.
www.peri.com.tr www.peri.es www.peri.lu www.peri.sk

AT
Austria FI
Finland LV
Latvia TR
Turkey
PERI Ges.mbH PERI Suomi Ltd. Oy PERI SIA PERI Kalıp ve İskeleleri
www.peri.at www.perisuomi.fi www.peri-latvija.lv www.peri.com.tr

BA Bosnia and Herzegovina FR

France NL
Netherlands UA
Ukraine
PERI oplate i skele d.o.o PERI S.A.S. PERI B.V. TOW PERI
www.peri.com.hr www.peri.fr www.peri.nl www.peri.ua

BE
Belgium GB
United Kingdom NO
Norway
N.V. PERI S.A. PERI Ltd. PERI Norge AS
www.peri.be www.peri.ltd.uk www.peri.no

BG
Bulgaria GR
Greece PL
Poland
PERI Bulgaria EOOD PERI Hellas Ltd. PERI Polska Sp. z o.o.
www.peri.bg www.perihellas.gr www.peri.com.pl

BY
Belorussia HR
Croatia PT
Portugal
IOOO PERI PERI oplate i skele d.o.o. Pericofragens Lda.
www.peri.by www.peri.com.hr www.peri.pt

CH
Switzerland HU
Hungary RO
Romania
PERI AG PERI Kft. PERI România SRL
www.peri.ch www.peri.hu www.peri.ro

CZ Czech Republic IR
Ireland RS
Serbia
PERI spol. s r.o. Siteserv Access & Formwork PERI oplate d.o.o.
www.peri.cz www.siteservaccess.ie www.peri.rs

37
The optimal System
for every Project and
every Requirement

Wall Formwork Column Formwork Slab Formwork

Climbing Systems Bridge Formwork Tunnel Formwork Shoring Systems

Construction Scaffold Facade Scaffold Industrial Scaffold Access

DE en 11 | 2016 5eb 792691 © PERI GmbH

Protection Scaffold Safety Systems System-Independent Accessories Services

PERI GmbH
Formwork Scaffolding Engineering
Rudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950 - 0
Fax +49 (0)7309.951- 0
[email protected]
www.peri.com