Cable entry- and

cable retaining systems

828
CABLE ENTRY SYSTEM
FOR CABLES WITH CONNECTORS
The cable entry system is designed for inserting pre-assembled
cables and electrical conduits in divider walls, junction boxes,
control cabinets...

from page 879

CABLE ENTRY SYSTEM

FOR CABLES WITHOUT CONNECTORS
The cable entry plate is a routing and fastening system for ca-
bles without connectors or pneumatic hoses.

from page 907

EMC SOLUTIONS
The EMC systems are used to dissipate electromagnetic inter-
ference and conducted fault currents.

from page 959

STRAIN RELIEF / CABLE FIXING PLATE

The strain relief plate is used wherever the strain on cables,
single wires or conduits must be securely and easily relieved.
Cable fixing plates are clipped onto top-hat rails or C-rails
without tools.
from page 989

"M-SEAL“ CABLE FITTINGS

"m-seal“ cable fittings, made of plastic or metal, are able to
meet highest demands and can be mounted quickly and easily.

from page 1007

ACCESSORIES / TOOLS AND PUNCHING TOOLS

Adapter plates, blanking panels, catch hooks and much more.
Tools for electrical installation, as well as for creating exact cut-
outs in steel and stainless steel sheets.

from page 1013

829
Solutions for cable applications – Product line overview . . . . . . . . . . . . . . . . . . . . Page 829
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 830 – 833

SELECTION TABLES CABLE ENTRY SYSTEMS AND CABLE ENTRY PLATES

Overview selection tables . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 836
Overview grommets for cable entry systems. . . . . . . . . . . . . . . . . . . . . Page 837
Selection tables for cable entry systems . . . . . . . . . . . . . . . . . . . . . . Page 838 – 851
Selection tables for plastic cable entry plates. . . . . . . . . . . . . . . . . . . . Page 852 – 863
Selection tables for metal cable entry plates. . . . . . . . . . . . . . . . . . . . . Page 864 – 871
Selection tables for cable entry membranes . . . . . . . . . . . . . . . . . . . . . Page 872 – 875
Selection tables for cable entry plates for railway technology . . . . . . . . . . . . . . . Page 876 – 878

CABLE ENTRY PLATES FOR CABLES WITH PLUG CONNECTORS

KDL/C, KDL/D and KDL/H cable entry systems . . . . . . . . . . . . . . . . . . . . Page 879 – 890
• KDL/C cable entry system . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 880 – 881
• KDL/D cable entry system . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 882 – 883
• KDL/D-mono cable entry system . . . . . . . . . . . . . . . . . . . . . . . . . . Page 884
• KDL/H cable entry system. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 885 – 886
KDT/X cable entry grommets. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 887 – 889
KDL/E cable entry system . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 891 – 896
• KDL/E cable entry system. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 892 – 893
KDT/xE cable entry grommets . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 894 – 895
KDL/S cable entry system . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 897 – 902
• KDL/S cable entry system. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 898 – 899
KDT/S cable entry grommets. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 900 –901
KDL-Jumbo cable entry system. . . . . . . . . . . . . . . . . . . . . . . . . Page 903 – 906
• KDL-Jumbo cable entry system. . . . . . . . . . . . . . . . . . . . . . . . . . Page 904
KDT/Z-Jumbo cable entry grommets . . . . . . . . . . . . . . . . . . . . . . . . . Page 905

CABLE ENTRY PLATES FOR CABLES WITHOUT PLUG CONNECTORS

KDP cable entry plate, plastic, rectangular. . . . . . . . . . . . . . . . . . . . . Page 907 – 918
• KDP/N 24 cable entry plate, plastic. . . . . . . . . . . . . . . . . . . . . . . . . Page 908 – 909
• KDP/X 24 cable entry plate, plastic . . . . . . . . . . . . . . . . . . . . . . . . . Page 910 – 911
• KDP/E 24 cable entry plate, plastic . . . . . . . . . . . . . . . . . . . . . . . . . Page 912 – 913
• KDP 24-Multi cable entry plate, plastic. . . . . . . . . . . . . . . . . . . . . . . . Page 914
• KDP/F 24 cable entry plate, plastic . . . . . . . . . . . . . . . . . . . . . . . . . Page 915 – 916
• KDP/Z 24 cable entry plate, plastic . . . . . . . . . . . . . . . . . . . . . . . . . Page 917

KDP cable entry plate, plastic, round. . . . . . . . . . . . . . . . . . . . . . . Page 919 – 922

• KDP/R cable entry plate, plastic, round. . . . . . . . . . . . . . . . . . . . . . . . Page 920
• KDP/R-KGM cable entry plate, plastic, round. . . . . . . . . . . . . . . . . . . . . . Page 921
• KDPR/F cable entry plate, plastic, round . . . . . . . . . . . . . . . . . . . . . . . . Page 922

KDP cablequick® cable entry plate, metal, rectangular . . . . . . . . . . . . . . . . . Page 923 – 942
• cablequick® Type 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 924 – 930
• cablequick® Type 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 931 – 932
• cablequick® Type 105 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 933 – 934
• cablequick® Type 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 935 – 936
• cablequick® Type 134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 937
• cablequick® Type 149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 938 – 941
• cablequick® Type 160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 942

830
KDM cable entry membrane. . . . . . . . . . . . . . . . . . . . . . . . . . Page 943 – 946
• KDM cable entry membrane . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 944
• KDM/F cable entry membrane . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 945
• KDM/G cable entry membrane. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 946

CABLE ENTRY PLATES FOR RAILWAY TECHNOLOGY

Cable entry system KDL railway technology. . . . . . . . . . . . . . . . . . . . . Page 947 – 952
• RAS room integrity set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 948
• KDL/D-EN cable entry system . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 949 – 950
• KDL/H-EN cable entry system . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 951
KDT/X-EN cable entry grommets . . . . . . . . . . . . . . . . . . . . . . . . . . Page 952
Cable entry plate KDP railway technology . . . . . . . . . . . . . . . . . . . . . Page 953 – 958
• KDP/EN cable entry plate, plastic . . . . . . . . . . . . . . . . . . . . . . . . . . Page 953 – 954
• KDP/EN-RA cable entry plate, plastic . . . . . . . . . . . . . . . . . . . . . . . . Page 955 – 956
• KDP/EN cable entry plate, metal. . . . . . . . . . . . . . . . . . . . . . . . . . Page 957

EMC SOLUTIONS
EMC shield clips system. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 959 – 969
• SC-EMV / MSC-EMV shield clips. . . . . . . . . . . . . . . . . . . . . . . . . . Page 960
• SCF-EMV / MSCF-EMV shield clips with snap-on foot . . . . . . . . . . . . . . . . . . . Page 961
• SCFZ-EMV shield clip with snap-on foot and strain relief . . . . . . . . . . . . . . . . . . . Page 962
• DCS-EMV / DCSZ-EMV double clip for busbar. . . . . . . . . . . . . . . . . . . . . . Page 963
• MCS-EMV / MCSZ-EMV multi-clip for busbar . . . . . . . . . . . . . . . . . . . . . . Page 964
• MFZ-EMV mounting foot with strain relief . . . . . . . . . . . . . . . . . . . . . . . Page 965
• SF-EMV / SFZ-EMV mounting foot for busbar. . . . . . . . . . . . . . . . . . . . . . Page 966
• DF-EMV / DFZ-EMV direct-mount foot. . . . . . . . . . . . . . . . . . . . . . . . Page 967
• RFZ-EMV foot for string mounting with strain relief. . . . . . . . . . . . . . . . . . . . Page 968
• EMC solutions assortment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 969

EMC cable entry system. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 970 – 973

• KDL xx/xx-EMV cable entry system. . . . . . . . . . . . . . . . . . . . . . . . . Page 970 – 971
KDT/Z-EMV cable entry grommets. . . . . . . . . . . . . . . . . . . . . . . . . Page 972 – 973
EMC cable entry plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 974
• KDP/N-EMV module cable entry plate . . . . . . . . . . . . . . . . . . . . . . . . Page 974

EMC cable fixing plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 975 – 978

• KAF/K cable fixing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 975
• KAF/EK cable fixing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 976
• KAF/SF cable fixing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 977
• KAF/DC cable fixing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 978
EMC strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 979
• ZL xx-AB strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 979

EMC discharge plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 980 – 982

• KDL-AB discharge plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 980
• KDL/N-AB discharge plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 981
• AB-Clip 24-EMV discharge plate. . . . . . . . . . . . . . . . . . . . . . . . . . Page 982

EMC shield clip system accessories. . . . . . . . . . . . . . . . . . . . . . . Page 983 – 985

• SAS busbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 983
• SMF busbar mounting foot. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 984
• FBE ribbon earthing cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 985

831
Shielding clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 986 – 988
• SK shielding clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 986
• SKS shielding clamp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 987

STRAIN RELIEF / CABLE FIXING PLATE

Strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 989 – 1003
• ZL-fix strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 990
• ZL strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 991 – 992
• ZL-AH strain relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 993
• ZL-MH strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 994 – 995
• ZL-AM strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 996
• ZL-SW strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 997
• ZL-C strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 998 – 999
• ZL-MF strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1000
• ZLF strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1001
• KDZL strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1002
• KS-fix strain relief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1003

Cable fixing plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1004 – 1006

• KAF cable fixing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1004
• KAF/NI cable fixing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1005
• KBL cable tie rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1006

CABLE FITTINGS M-SEAL®

Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1007 – 1012
• Cable fitting m-seal® KV (plastic version) . . . . . . . . . . . . . . . . . . . . . . . Page 1008 – 1009
• Cable fitting m-seal® MV (metal version). . . . . . . . . . . . . . . . . . . . . . . . Page 1010 – 1011
• Cable fitting m-seal® EMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1012

ACCESSORIES
Cable entry / Cable retaining
Catch hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1014
• KDL/E catch hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1014
Control cabinet floor plate . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1015
• SBB control cabinet floor plate. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1015
Conduit connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1016
• KDP/H conduit connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1016
Blanking plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1017 – 1018
• Blanking plate (plastic version) . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1017
• Blanking plate (metal version). . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1018
Adapter plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1019 – 1023
• Rittal adapter plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1019 – 1020
• Sarel adapter plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1021
• Lohmeier adapter plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1022
• Ensto adapter plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1023

Strain relief / cable fixing plate

Spacer sleeve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1024
• DH spacer sleeve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1024
Insert bushing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1025
• ELB insert bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1025

832
Securing rivet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1026
• BN securing rivet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1026
Cable tie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1027 – 1029
• KB/KBM cable tie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1027 – 1028
• BF cable ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1029
Screw-down and adhesive holder . . . . . . . . . . . . . . . . . . . . . . . . Page 1030 – 1031
• SH screw-down holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1030
• KH screw-down and adhesive holder . . . . . . . . . . . . . . . . . . . . . . . . Page 1031
Velcro strip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1032
• KB-fix Velcro strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1032
Sealing plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1033
• VST sealing plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1033

TOOLS
Riveting tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1036
• BNW riveting tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1036
Assembly tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1037 – 1040
• KS cable shears. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1037
• KM cable stripping knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1038
• KBW / KKBW cable tie tool for plastic cable ties. . . . . . . . . . . . . . . . . . . . . Page 1039
• MMH magnetic assembly aid. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1040

Punching tools
Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1042 – 1044
• SW-HG hydraulic manual punch. . . . . . . . . . . . . . . . . . . . . . . . . . Page 1042
• SW-HW hydraulic manual punch. . . . . . . . . . . . . . . . . . . . . . . . . . Page 1043
• SW-HF hydraulic foot punch . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1044
Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1045 – 1051
• SW-WR punching tools (rectangular). . . . . . . . . . . . . . . . . . . . . . . . . Page 1045
• SW-WQ punching tools (square). . . . . . . . . . . . . . . . . . . . . . . . . . Page 1046
• SW-WE punching tools (round) . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1047 – 1048
• SW-WS punching tool sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1049
• SW-WD punching tool (SUB-MIN-D). . . . . . . . . . . . . . . . . . . . . . . . . Page 1050
• SW-ASN universal punching tools . . . . . . . . . . . . . . . . . . . . . . . . . Page 1051
Spare parts for punching tools . . . . . . . . . . . . . . . . . . . . . . . . . Page 1052
• Tension bolt / spacer bushings / tap drills / replacement stamp . . . . . . . . . . . . . . . . . Page 1052

APPENDIX
• Protection classes in accordance with DIN EN 60529. . . . . . . . . . . . . . . . . . . . Page 1054
• Description of fire classifications according to UL 94 . . . . . . . . . . . . . . . . . . . . Page 1055
• General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1056

INDEX OF TYPES Page 1057 – 1058

833
834
Selection tables
Cable entry systems
Cable entry plates

835
Overview selection tables
THE MOST IMPORTANT MURRPLASTIK CABLE ENTRY SYSTEMS IN THE OVERVIEW

Which cable entry system would best meet your requirements? How many openings for cables with or without connectors
are available on the system? What are the available forms and materials?
Get an overview of our systems and the corresponding accessories.

Cable entry system KDP cable entry plate,

Type KDL/C and KDL/D plastic, round
Cable entry systems for cables with Types KDPR/F, KDP/R and KDP/R-KGM for
connectors. The KDL/D is built with a cables without connectors. For standard
massive frame for increased stability. M40, M50 and M63 cut-outs.
from page 830 from page 862

KDL/H cable entry system Cable entry plate

Die-cast zinc cable entry systems for Type KDP, metal, cablequick®
cables with connectors For the highest Cable entry for cables without con-
degree of stability and tightness up to nectors, made of V4A stainless steel,
IP 69K. sheet metal or aluminum.
from page 844 from page 864

KDL/E cable entry system Cable entry membranes

Cable entry plates for cables with con- Type KDM
ductors fitting cut-out sizes 16- and For cables without connectors and for
24-pin. pneumatic tubing. Fits standard cut-outs
of M12 to M50.
from page 846 from page 872

KDL-Jumbo cable entry system Cable entry plate

Splittable cable entry plates for cables for railway technology
with diameters of 30 – 65 mm (1.18 – The types KDP/EN and KDP/EN-RA meet
2.56 in). the requirements of the
EN 45545-2:2013 standards for railway
from page 850 technology. from page 876

KDP cable entry plate,

plastic, rectangular
Types KDP/X, KDP/N, KDP/E, KDP/F and
KDP 24-Multi for cables without con-
nectors. Greatest diversity in variants
and applications. from page 852

836
Overview grommets for cable entry systems
POSSIBLE COMBINATIONS OF VARIOUS GROMMETS AND CABLE ENTRY SYSTEMS

The most varied combinations of cables and conduits can be installed in our cable entry systems using various grommets.
This is an overview of the available grommet types and suitable cable entry systems.

KDL/E KDL/C KDL/D KDL/H KDL-Jumbo

Cable grommet Grommets with diameters of between 3 and 65 mm (0.12 and 2.56 in) for round cables
KDT/ZE small KDT/X small KDT/Z jumbo
KDT/X medium
KDT/ZE large KDT/X large

Variable cable grommet Grommets with variable diameter for round cables
KDT/VE small

ASI-/USB-/LAN grommet Special grommets

KDT/ZE ASI small KDT/X ASI medium
KDT/ZE 2 x ASI KDT/X 2 x ASI medium
KDT/X-USB medium
KDT/X-LAN large

Multi-line grommet High-capacity grommets with several openings

KDT/ZE 2 x / 4 x small KDT/X 2 x 0.08 in. 2 x 0.12 in. 2 x 0.16 in. small (2 mm / 3 mm / 4 mm)
KDT/X 4 x 0.08 in. 4 x 0.12 in. 4 x 0.16 in. small (2 mm / 3 mm / 4 mm)
KDT/X 2 x 0.20 in. 2 x 0.24 in. 2 x 0.28 in. 2 x 0.31 in. medium (6 mm / 7 mm / 8 mm)
KDT/X 4 x 0.20 in. 4 x 0.24 in. 4 x 0.28 in. 4 x 0.31 in. medium (6 mm / 7 mm / 8 mm)

Conduit grommet Grommets for the feed-through of cable protection conduits

SDT/ZE small
SDT/ZE large

Dummy grommet Grommets for closing off unused slots

BTK/E small BTK/X small BT-Jumbo
BTG/E large BTG/X medium
BTG/XL large

837
Selection table KDL/C and KDL/D 24/xx for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

KDL/C 24 and KDL/D 24 cable entry systems have the identical grommet block, equipped with large, medium and small
grommets for a variety of uses. The three-compartment frame clearly gives the KDL/D the better mechanical stability and a
higher degree of tightness.

X Number of grommets Small grommets Medium grommets Large grommets

X Suitable grommets A 0.08 – 0.47 inch B 0.47 – 0.87 inch C 0.87 – 1.18 inch

Number of grommets: 1 Number of grommets: 2

KDT/X cable grommet KDT/X cable grommet
B C KDT/X 2 x / 4 x multi-line grommet BTG/XL dummy grommet
C BTG/X dummy grommet ATG/XLadapter grommet
KDT/X ASI, ASI cable bushing
KDL/D 24/3 KDT/X USB USB cable grommet
KDL/D: 87141013 ATG/X adapter grommet

Number of grommets: 4
KDT/X cable grommet
B B KDT/X 2 x / 4 x multi-line grommet
B B
BTG/X dummy grommet
KDT/X ASI, ASI cable bushing
KDL/C/D 24/4 KDT/X USB USB cable grommet
KDL/C: 87141016 / KDL/D: 87141014 ATG/X adapter grommet

Number of grommets: 2
A
KDT/X cable grommet
A A
B KDT/X 2 x / 4 x multi-line grommet
B A A
A
Number of grommets: 6 BTG/X dummy grommet
KDT/X cable grommet KDT/X ASI, ASI cable bushing
KDL/C/D 24/8 KDT/X 2 x / 4 x multi-line grommet KDT/X USB USB cable grommet
KDL/C: 87141020 / KDL/D: 87141018 BTK/X dummy grommet ATG/X adapter grommet

Number of grommets: 1
A A KDT/X cable grommet
A A
A A KDT/X 2 x / 4 x multi-line grommet
B A
A
Number of grommets: 8 BTG/X dummy grommet
KDT/X cable grommet KDT/X ASI, ASI cable bushing
KDL/C/D 24/9 KDT/X 2 x / 4 x multi-line grommet KDT/X USB USB cable grommet
KDL/C: 87141024 / KDL/D: 87141022 BTK/X dummy grommet ATG/X adapter grommet

A A
A A
A A A A
A A A Number of grommets: 12
A
KDT/X cable grommet
KDL/C/D 24/12 KDT/X 2 x / 4 x multi-line grommet
KDL/C: 87141012 / KDL/D: 87141010 BTK/X dummy grommet

838
Available grommets for all variants of KDL/C, KDL/D and KDL/H
A B C
Small grommets Medium grommets Large grommets

CABLE GROMMET FOR ROUND CABLES

For example, the KDT/X cable entry grommets are perfect for cable entries
or feed-through of round, pre-assembled cables at control cabinets. The
small version covers cable diameters of between 0.08 – 0.47 inch (2 to
12 mm), the medium covers between 0.47 – 0.87 inch (12 to 22 mm) and
the large covers between 0.87 – 1.18 inch (22 to 30 mm). The lengthwise
slotted grommet, made of thermoplastic natural rubber is placed around
KDT/X KDT/X KDT/X the cable and pushed into the grommet block.

MULTI-LINE CABLE ENTRY GROMMET

The KDT/X 2 x / 4 x multi-line cable entry grommet in their small version (for
slots of type A ) and in the medium version (for slots of type B ) facilitate
cable entry for two or four round pre-assembled cables without problem,
e.g. entry into or feed-through at a control cabinet. The grommet is made
of thermoplastic rubber.
KDT/X 2 x / 4 x KDT/X 2 x / 4 x

DUMMY GROMMET
With the BTK/X dummy grommets (for slots Type A ), BTG/X (for slots Type
B ) and BTG/XL (for slots Type C ) unused openings can be tightly sealed.

BTK/X BTG/X BTG/XL

ASI CABLE BUSHING

The KDT/X ASI medium ASI cable bushing (for slots of Type B ) can easily
accommodate ASI bus cables, e.g. entry into or feed-through at control
cabinets. One or two-cables per grommet versions are available. The
grommet is made of thermoplastic rubber.

KDT/X ASI

USB / LAN CABLE GROMMET

The USB cable grommet KDT/X-USB (for slots of Type B ) facilitates the
routing of KDL/C or KDL/D. There are two versions available, including
3.28 ft (1 m) or 9.84 ft (3 m) USB cables. The LAN cable grommet KDT/X-
LAN (for slots Type C ) facilitates the routing of KDL/C oder KDL/D. Both
grommets are made of thermoplastic rubber.
KDT/X-USB KDT/X-LAN

ADAPTER GROMMET
The ATG/X adapter grommet (for slots of Type B ) facilitates the installation
of a small grommet into a slot for medium grommets. The ATG/XL adapter
grommet (for slots of Type C ) facilitates the installation of a medium
grommet into a slot for large grommets.

ATG/X ATG/XL

839
Selection table KDL/C and KDL/D 16/x for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

KDL/C 16 and KDL/D 16 cable entry systems have the identical grommet block, equipped with large, medium and small
grommets for a variety of uses. The three-compartment frame clearly gives the KDL/D the better mechanical stability and a
higher degree of tightness.

X Number of grommets Small grommets Medium grommets Large grommets

X Suitable grommets A 0.08 – 0.47 inch B 0.47 – 0.87 inch C 0.87 – 1.18 inch

Number of grommets: 2
KDT/X cable grommet
C BTG/XL dummy grommet
C
ATG/XL adapter grommet

KDL/D 16/2
KDL/D: 87141033

Number of grommets: 3
KDT/X cable grommet
B
B B KDT/X 2 x / 4 x multi-line grommet
BTG/X dummy grommet
KDT/X ASI, ASI cable bushing
KDL/C/D 16/3 KDT/X USB USB cable grommet
KDL/C: 87141036 / KDL/D: 87141034 ATG/X adapter grommet

Number of grommets: 6 Number of grommets: 1

A A KDT/X cable grommet KDT/X cable grommet
A
B A A KDT/X 2 x / 4 x multi-line grommet KDT/X 2 x / 4 x multi-line grommet
A
BTK/X dummy grommet BTG/X dummy grommet
KDT/X ASI, ASI cable bushing
KDL/C/D 16/7 KDT/X USB USB cable grommet
KDL/C: 87141032 / KDL/D: 87141030 ATG/X adapter grommet

Number of grommets: 8
A KDT/X cable grommet
A
A
A A KDT/X 2 x / 4 x multi-line grommet
A
A
A BTK/X dummy grommet

KDL/C/D 16/8
KDL/C: 87141028 / KDL/D: 87141026

840
Selection table KDL/C and KDL/D 10/x for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

KDL/C 10 and KDL/D 10 cable entry systems have the identical grommet block, equipped with medium and small
grommets for a variety of uses. The three-compartment frame clearly gives the KDL/D the better mechanical stability and a
higher degree of tightness.

X Number of grommets
X Suitable grommets A Small grommets 0.08 – 0.47 inch B Medium grommets 0.47 – 0.87 in.

Number of grommets: 2
KDT/X cable grommet
B B KDT/X 2 x / 4 x multi-line grommet
BTG/X dummy grommet
KDT/X ASI, ASI cable bushing
KDL/C/D 10/2 KDT/X USB USB cable grommet
KDL/C: 87141041 / KDL/D: 87141039 ATG/X adapter grommet

Number of grommets: 4 Number of grommets: 1

A KDT/X cable grommet KDT/X cable grommet
A
B A KDT/X 2 x / 4 x multi-line grommet KDT/X 2 x / 4 x multi-line grommet
A
BTK/X dummy grommet BTG/X dummy grommet
KDT/X ASI, ASI cable bushing
KDL/C/D 10/5 KDT/X USB USB cable grommet
KDL/C: 87141043 / KDL/D: 87141042 ATG/X adapter grommet

Number of grommets: 6
A KDT/X cable grommet
A
A KDT/X 2 x / 4 x multi-line grommet
A
A
A BTK/X dummy grommet

KDL/C/D 10/6
KDL/C: 87141040 / KDL/D: 87141038

KDL/C: Two-piece frame plus grommet block KDL/D: Three-piece frame plus grommet block

841
Selection table KDL/C and KDL/D 6/x, 1/x and KDL/D-R M50/x
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

KDL/C 6 and KDL/D 6 cable entry systems have the identical grommet block, that can be equipped with small grommets
for a variety of uses. The three-compartment frame clearly gives the KDL/D the better mechanical stability and a higher
degree of tightness. The KDL/D-R M50/4 is designed for installation into 1.97 in (50 mm) Ø circular cut-outs.

X Number of grommets
X Suitable grommets A Small grommets 0.08 – 0.47 inch B Medium grommets 0.47 – 0.87 in.

Number of grommets: 4
A KDT/X cable grommet
A A
A
A A
A KDT/X 2 x / 4 x multi-line grommet
A
BTK/X dummy grommet

KDL/C/D 6/4
KDL/C: 87141046 / KDL/D: 87141044

Number of grommets: 6
KDT/X cable grommet
A A
A A KDT/X 2 x / 4 x multi-line grommet
A A
BTK/X dummy grommet

KDL/D 1/6
KDL/D: 87141048

Number of grommets: 4
A KDT/X cable grommet
A
A KDT/X 2 x / 4 x multi-line grommet
A
BTK/X dummy grommet

KDL/D-R M50/4
KDL/D: 87141002

KDL/D 6/4: Three-piece frame, grommet block and grommets KDL/D 6/4 and KDL/D 1/6 (grommet block) and their applications

842
843
Selection table KDL/H 24/x for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

The KDL/H is manufactured in a zinc die-cast process or made of milled aluminium and enables the insertion, sealing and
strain relief of pre-assembled cables and conduits, for example in control cabinets and terminal boxes. The KDL/H can
be equipped with large, medium and small grommets for a wide variety of applications. Multi-line cable entry grommets
increase the capacity. It distinguishes itself through its especially strong construction and high degree of tightness, all the
way to IP 69K.

X Number of grommets Small grommets Medium grommets Large grommets

X Suitable grommets A 0.08 – 0.47 inch B 0.47 – 0.87 inch C 0.87 – 1.18 inch

Number of grommets: 1 Number of grommets: 2

KDT/X cable grommet KDT/X cable grommet
C KDT/X 2 x / 4 x multi-line grommet BTG/XL dummy grommet
C B
BTG/X dummy grommet ATG/XL adapter grommet
KDT/X ASI, ASI cable bushing
KDL/H 24/3 KDT/X USB USB cable grommet
Order no.: 87141414 ATG/X adapter grommet

Number of grommets: 4
KDT/X cable grommet
B B KDT/X 2 x / 4 x multi-line grommet
B B BTG/X dummy grommet
KDT/X ASI, ASI cable bushing
KDL/H 24/4 KDT/X USB USB cable grommet
Order no.: 87141412 ATG/X adapter grommet

Number of grommets: 12
A A KDT/X cable grommet
A A
A A A KDT/X 2 x / 4 x multi-line grommet
A A
A A
A BTK/X dummy grommet

KDL/H 24/12
Order no.: 87141410

KDL/H 24/12 in application

844
Selection table KDL/H 16/x and special sizes for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

The KDL/H is manufactured in a zinc die-cast process or made of milled aluminium and enables the insertion, sealing and
strain relief of pre-assembled cables and conduits, for example in control cabinets and terminal boxes. The KDL/H can
be equipped with large, medium and small grommets for a wide variety of applications.. Multi-line cable entry grommets
increase the capacity. It distinguishes itself through its especially strong construction and high degree of tightness, all the
way to IP 69K.

X Number of grommets Small grommets Medium grommets Large grommets

X Suitable grommets A 0.08 – 0.47 inch B 0.47 – 0.87 inch C 0.87 – 1.18 inch

Number of grommets: 2
KDT/X cable grommet
C BTG/XL dummy grommet
C
ATG/XL adapter grommet

KDL/H 16/2
Order no.: 87141420

Number of grommets: 3
KDT/X cable grommet
B
KDT/X 2 x / 4 x multi-line grommet
B B
BTG/X dummy grommet
KDT/X ASI, ASI cable bushing
KDL/H 16/3 KDT/X USB USB cable grommet
Order no.: 87141416 ATG/X adapter grommet

Number of grommets: 8
A KDT/X cable grommet
A A
A A KDT/X 2 x / 4 x multi-line grommet
A A
A BTK/X dummy grommet

KDL/H 16/8
Order no.: 87141418

Number of grommets: 6
KDT/X cable grommet
A A
A A KDT/X 2 x / 4 x multi-line grommet
A A
BTK/X dummy grommet

KDL/H 1/6
Order no.: 87141422

Number of grommets: 4
KDT/X cable grommet
A
A
A KDT/X 2 x / 4 x multi-line grommet
A BTK/X dummy grommet

KDL/H M50/4
Order no.: 87141424

845
Selection table KDL/E 16/x for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

The frames of the cable entry system KDL/E 16 can be equipped with large and/or small grommets.
Small grommets (marked with A in the picture) can be used for the installation of cables with diameters of 0.12 to 0.63 in
(3 – 16 mm).
Large grommets (marked with B in the picture) can be used for the installation of cables with diameters of 0.63 to 1.22 in
(16 – 31 mm).

A B
X Number of grommets
X Suitable grommets
Small grommets 0.12 – 0.63 in Large grommets 0.63 – 1.22 in

Number of grommets: 2
KDT/ZE cable grommet
B SDT/ZE conduit grommet
B
ATG/E adapter grommet
BTG/E dummy grommet
KDL/E 16/2
Order no.: 87121010

Number of grommets: 4 Number of grommets: 0

A KDT/ZE cable grommet
A
A KDT/VE cable vario grommet
A
KDT/ZE ASI, ASI cable bushing
KDT/X 2 x / 4 x multi-line grommet
KDL/E 16/4 SDT/ZE conduit grommet
Order no.: 87121011 BTK/E dummy grommet

Number of grommets: 4 Number of grommets: 1

KDT/ZE cable grommet KDT/ZE cable grommet
A
A
KDT/VE cable vario grommet SDT/ZE conduit grommet
B A
A
KDT/ZE ASI, ASI cable bushing ATG/E adapter grommet
KDT/X 2 x / 4 x multi-line grommet BTG/E dummy grommet
KDL/E 16/5 SDT/ZE conduit grommet
Order no.: 87121012 BTK/E dummy grommet

Number of grommets: 8
KDT/ZE cable grommet
A A
A KDT/VE cable vario grommet
A A
A
A
A KDT/ZE ASI, ASI cable bushing
KDT/X 2 x / 4 x multi-line grommet
KDL/E 16/8 SDT/ZE conduit grommet
Order no.: 87121014 BTK/E dummy grommet

846
Available grommets for KDL/E 16/x
A B
Small grommets Large grommets
CABLE GROMMET FOR ROUND CABLES
For example, the KDT/ZE cable entry grommets are perfect for cable entries or feed-through
of round, pre-assembled cables at control cabinets. The small design covers cable diameters
of between 0.12 to 0.63 in (3 to 16 mm), the large design is for 0.63 to 1.22 in (16 to 31 mm)
versions.
The grommet, made of thermoplastic rubber is 2-pce. and is positioned around the cable.
KDT/ZE KDT/ZE Strain relief can be achieved by installing cable ties.

VARIABLE CABLE GROMMET (PROTECTION CLASS IP 42)

The KDT/VE small type, variable cable grommet (for slots of Type A ) can easily accommodate
round, pre-configured cables, e.g. for entry into or feed-through at control cabinets. Two
different diameter ranges can be serviced:
Cable diameters from 0.12 to 0.28 in (3 to 7 mm) and from 0.28 to 0.39 in (7 to 10 mm).
The grommet, made of thermoplastic rubber is slotted and is positioned around the cables.
KDT/VE

ASI CABLE BUSHING

The KDT/ZE ASI small ASI cable bushing (for slots of Type A ) can easily accommodate ASI bus
cables, e.g. for entry into or feed-through at control cabinets.
One or two-cables per grommet versions are available.
The grommet, made of thermoplastic rubber, is 2-pce. and will be positioned around the cable.
Strain relief can be achieved by installing cable ties.
KDT/ZE ASI

MULTI-LINE CABLE ENTRY GROMMET

The KDT/ZE 2 x / 4 x multi-line cable entry grommets in their small version (for slots of Type A )
facilitate easy cable entry for several round, pre-assembled cables, e.g. entry into or feed-
through at a control cabinet. Two- or four-cables per grommet versions are available.
The grommet, made of thermoplastic rubber is either slotted, or 2-pce. and will be positioned
around the cable. Strain relief can be achieved by installing cable ties.
KDT/ZE 2 x / 4 x

CONDUIT GROMMET FOR MURRFLEX CABLE PROTECTION CONDUITS

For example, the SDT/ZE conduit grommets are perfect for Murrplastik cable protection conduit
infeed or feed-through at control cabinets. The smaller versions accommodate tube sizes M10/
P7 to M16/P11, the large versions are for M20/P16 and M25/P21.
The grommet, made of thermoplastic rubber is 2-pce. and will be positioned around the con-
duits. Strain relief can be achieved by installing cable ties.
SDT/ZE SDT/ZE

DUMMY GROMMET ADAPTER GROMMET

With the BTK/E dummy grommets (for slots The ATG/E adapter grommet (for slots of
of Type A ) and BTG/E (for slots of Type B ) Type B ) facilitates the installation of a small
unused openings can be tightly sealed. grommet into a slot for large grommets.

BTK/E A BTG/E B ATG/E B

847
Selection table KDL/E 24/xx for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

The frames of the cable entry system KDL/E 24 can be equipped with large and/or small grommets.
Small grommets (marked with A in the picture) can be used for the installation of cables with diameters of 0.12 to 0.63 in
(3 – 16 mm).
Large grommets (marked with B in the picture) can be used for the installation of cables with diameters of 0.63 to 1.22 in
(16 – 31 mm).

A B
X Number of grommets
X Suitable grommets
Small grommets 0.12 – 0.63 in Large grommets 0.63 – 1.22 in

Number of grommets: 2 Number of grommets: 2

KDT/ZE cable grommet KDT/ZE cable grommet
A B
KDT/VE cable vario grommet SDT/ZE conduit grommet
B A
KDT/ZE 2 x ASI cable bushing ATG/E adapter grommet
KDT/X 2 x / 4 x multi-line grommet BTG/E dummy grommet
KDL/E 24/4 SDT/ZE conduit grommet
Order no.: 87121016 BTK/E dummy grommet

Number of grommets: 6 Number of grommets: 1

A KDT/ZE cable grommet KDT/ZE cable grommet
A
A A KDT/VE cable vario grommet SDT/ZE conduit grommet
A
B A KDT/ZE 2 x ASI cable bushing ATG/E adapter grommet
KDT/X 2 x / 4 x multi-line grommet BTG/E dummy grommet
KDL/E 24/7 SDT/ZE conduit grommet
Order no.: 87121018 BTK/E dummy grommet

Number of grommets: 10 Number of grommets: 0

A KDT/ZE cable grommet
A
A
A A KDT/VE cable vario grommet
A
A A KDT/ZE 2 x ASI cable bushing
A
A
KDT/X 2 x / 4 x multi-line grommet
KDL/E 24/10 SDT/ZE conduit grommet
Order no.: 87121020 BTK/E dummy grommet

KDL/E 24 for cables with connectors in applications

848
Available grommets for KDL/E 24/xx
A B
Small grommets Large grommets
CABLE GROMMET FOR ROUND CABLES
For example, the KDT/ZE cable entry grommets are perfect for cable entries or feed-through
of round, pre-assembled cables at control cabinets. The small design covers cable diameters
of between 0.12 to 0.63 in (3 to 16 mm), the large design is for 0.63 to 1.22 in (16 to 31 mm)
versions.
The grommet, made of thermoplastic rubber is 2-pce. and is positioned around the cable.
KDT/ZE KDT/ZE Strain relief can be achieved by installing cable ties.

VARIABLE CABLE GROMMET (PROTECTION CLASS IP 42)

The KDT/VE small type, variable cable grommet (for slots of Type A ) can easily accommodate
round, pre-configured cables, e.g. for entry into or feed-through at control cabinets. Two
different diameter ranges can be serviced:
Cable diameters from 0.12 to 0.28 in (3 to 7 mm) and from 0.28 to 0.39 in (7 to 10 mm).
The grommet, made of thermoplastic rubber is slotted and is positioned around the cables.
KDT/VE

ASI CABLE BUSHING

The KDT/ZE ASI small ASI cable bushing (for slots of Type A ) can easily accommodate ASI bus
cables, e.g. for entry into or feed-through at control cabinets.
One or two-cables per grommet versions are available.
The grommet, made of thermoplastic rubber, is 2-pce. and will be positioned around the cable.
Strain relief can be achieved by installing cable ties.
KDT/ZE ASI

MULTI-LINE CABLE ENTRY GROMMET

The KDT/ZE 2 x / 4 x multi-line cable entry grommets in their small version (for slots of Type A )
facilitate easy cable entry for several round, pre-assembled cables, e.g. entry into or feed-
through at a control cabinet. Two- or four-cables per grommet versions are available.
The grommet, made of thermoplastic rubber is either slotted, or 2-pce. and will be positioned
around the line. Strain relief can be achieved by installing cable ties.
KDT/ZE 2 x / 4 x

CONDUIT GROMMET FOR MURRFLEX CABLE PROTECTION CONDUITS

For example, the SDT/ZE conduit grommets are perfect for Murrplastik cable protection conduit
infeed or feed-through at control cabinets. The smaller versions accommodate tube sizes M10/
P7 to M16/P11, the large versions are for M20/P16 and M25/P21.
The grommet, made of thermoplastic rubber is 2-pce. and will be positioned around the con-
duits. Strain relief can be achieved by installing cable ties.
SDT/ZE SDT/ZE

DUMMY GROMMET ADAPTER GROMMET

With the BTK/E dummy grommets (for slots The ATG/E adapter grommet (for slots of
of Type A ) and BTG/E (for slots of Type B ) Type B ) facilitates the installation of a small
unused openings can be tightly sealed. grommet into a slot for large grommets.

BTK/E A BTG/E B ATG/E B

849
Selection table KDL-Jumbo for cables with plugs
POSSIBLE COMBINATIONS OF CABLE ENTRY SYSTEMS AND GROMMETS

The KDL-Jumbo cable entry system is used for inserting pre-assembled cables. The KDL-Jumbo system is a fully split-
table system that enables the quick and simple installation of 1 or 2 pre-assembled cables with a diameter of between 1.18
to 2.56 in (30 and 65 mm) in control cabinets and terminal boxes.

A
X Number of grommets
X Suitable grommets
Splittable grommets for clamping range 1.18 to 2.56 in (30 – 65 mm).

Number of grommets: 1
KDT/Z-Jumbo cable grommet
BT-Jumbo dummy grommet
A

KDL-Jumbo 1
Order no.: 87176110

Number of grommets: 2
KDT/Z-Jumbo cable grommet
A BT-Jumbo dummy grommet
A

KDL-Jumbo 2
Order no.: 87176120

KDL-Jumbo 1 and KDL-Jumbo 2 and their applications

850
Available grommets for KDL-Jumbo
A
Jumbo grommets
CABLE GROMMET FOR ROUND CABLES
For example, the KDT/Z-Jumbo cable entry grommets are perfect for cable entries or feed-through of round, pre-assem-
bled cables with large cable diameters at control cabinets.
Cable diameters of 1.18 to 2.56 in (30 – 65 mm) are accommodated in 0,20 in (5 mm) increments.
The grommet, made of thermoplastic rubber is 2-pce. and is positioned around the cable.
Strain relief can be achieved by installing cable ties.
KDT/Z jumbo

DUMMY GROMMET
The BT-Jumbo dummy grommets (for slots of Type A ) facilitate the tight sealing of unused openings.

BT-Jumbo

851
Selection table KDP/N 24 for cables without plugs
X Number of openings

0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
X Clamping area in inch

2 0.12 – 0.26 in (3.0 – 6.5 mm)

1 0.20 – 0.36 in (5.0 – 9.2 mm)
5 0.35 – 0.55 in 9 – 14 mm
2 0.55 – 0.79 in
14 – 20 mm

KDP/N 24/10
Order no.: 87301108

4 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
3 0.55 – 0.79 in
14 – 20 mm

KDP/N 24/11
Order no.: 87301110

12 0.31 – 0.47 in 8 – 12 mm

KDP/N 24/12
Order no.: 87301120

2 0.12 – 0.22 in 3.0 – 5.5 mm
6 0.16 – 0.32 in (4.1 – 8.1 mm)
4 0.35 – 0.55 in 9 – 14 mm
1 0.55 – 0.79 in
14 – 20 mm

KDP/N 24/13
Order no.: 87301130

6 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
4 0.38 – 0.63 in (9.6 – 15.9 mm)

KDP/N 24/14
Order no.: 87301140

17 0.20 – 0.36 in (5.0 – 9.2 mm)

KDP/N 24/17
Order no.: 87301150

852
Selection table KDP/N 24 for cables without plugs
X Number of openings

0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
X Clamping area in inch

11 0.12 – 0.26 in (3.0 – 6.5 mm)

1 0.16 – 0.32 in (4.1 – 8.1 mm)
5 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/N 24/17-1
Order no.: 87301151

16 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
2 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/N 24/22
Order no.: 87301160

23 0.16 – 0.32 in (4.1 – 8.1 mm)

KDP/N 24/23
Order no.: 87301170

29 0.12 – 0.26 in (3.0 – 6.5 mm)

KDP/N 24/29
Order no.: 87301180

1.5 – 2.6 78 0.06 – 0.10 in (1.5 – 2.6 mm)

2 0.10 – 0.20 in 2.5 – 5.0 mm

KDP/N 24/80
Order no.: 87301190

853
Selection table KDP/X 24 for cables without plugs
X Number of openings

0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
X Clamping area in inch

2 0.12 – 0.26 in (3.0 – 6.5 mm)

1 0.20 – 0.36 in (5.0 – 9.2 mm)
5 0.35 – 0.55 in 9 – 14 mm
2 0.55 – 0.79 in
14 – 20 mm

KDP/X 24/10
Order no.: 87301305

4 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
3 0.55 – 0.79 in
14 – 20 mm

KDP/X 24/11
Order no.: 87301315

12 0.31 – 0.47 in 8 – 12 mm

KDP/X 24/12
Order no.: 87301325

2 0.12 – 0.22 in 3.0 – 5.5 mm
6 0.16 – 0.32 in (4.1 – 8.1 mm)
4 0.35 – 0.55 in 9 – 14 mm
1 0.55 – 0.79 in
14 – 20 mm

KDP/X 24/13
Order no.: 87301335

6 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
4 0.38 – 0.63 in (9.6 – 15.9 mm)

KDP/X 24/14
Order no.: 87301345

17 0.20 – 0.36 in (5.0 – 9.2 mm)

KDP/X 24/17
Order no.: 87301355

854
Selection table KDP/X 24 for cables without plugs
X Number of openings

0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
X Clamping area in inch

11 0.12 – 0.26 in (3.0 – 6.5 mm)

1 0.16 – 0.32 in (4.1 – 8.1 mm)
5 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/X 24/17-1
Order no.: 87301356

16 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
2 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/X 24/22
Order no.: 87301365

23 0.16 – 0.32 in (4.1 – 8.1 mm)

KDP/X 24/23
Order no.: 87301375

29 0.12 – 0.26 in (3.0 – 6.5 mm)

KDP/X 24/29
Order no.: 87301385

855
Selection table KDP/E 24 for cables without plugs
X Number of openings

0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
X Clamping area in inch

4 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
3 0.55 – 0.79 in
14 – 20 mm

KDP/E 24/11
Order no.: 87301310

12 0.31 – 0.47 in 8 – 12 mm

KDP/E 24/12
Order no.: 87301320

2 0.12 – 0.22 in 3.0 – 5.5 mm
6 0.16 – 0.32 in (4.1 – 8.1 mm)
4 0.35 – 0.55 in 9 – 14 mm
1 0.55 – 0.79 in
14 – 20 mm

KDP/E 24/13
Order no.: 87301330

6 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
4 0.38 – 0.63 in (9.6 – 15.9 mm)

KDP/E 24/14
Order no.: 87301340

17 0.20 – 0.36 in (5.0 – 9.2 mm)

KDP/E 24/17
Order no.: 87301350

11 0.12 – 0.26 in (3.0 – 6.5 mm)

1 0.16 – 0.32 in (4.1 – 8.1 mm)
5 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/E 24/17-1
Order no.: 87301351

856
Selection table KDP/E 24 for cables without plugs
X Number of openings

0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
X Clamping area in inch

16 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
2 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/E 24/22
Order no.: 87301360

23 0.16 – 0.32 in (4.1 – 8.1 mm)

KDP/E 24/23
Order no.: 87301370

29 0.12 – 0.26 in (3.0 – 6.5 mm)

KDP/E 24/29
Order no.: 87301380

857
Selection table KDP 24/xx/02 for cables without plugs
X Number of openings

0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.30
0.31
0.33
0.35
0.37
0.39
10.5
0.43
0.47
0.51
X Clamping area in inch

4 0.12 – 0.26 in (3.0 – 6.5 mm)

2 0.18 – 0.33 in (4.5 – 8.5 mm)
4 0.31 – 0.49 in (8.0 – 12.5 mm)
A
A

KDP 24/10/02
Order no.: 87301076 A = Slot for small cable entry grommet, see KDL/E 24

4 0.10 – 0.20 in 2.5 – 5.0 mm
2 0.12 – 0.26 in (3.0 – 6.5 mm)
8 0.18 – 0.33 in (4.5 – 8.5 mm)
A
A

KDP 24/14/02
Order no.: 87301078 A = Slot for small cable entry grommet, see KDL/E 24

2 0.06 – 0.14 in 1.5 – 3.5 mm
11 0.12 – 0.26 in (3.0 – 6.5 mm)
2 0.31 – 0.49 in (8.0 – 12.5 mm)
A
A

KDP 24/15/02
Order no.: 87301080 A = Slot for small cable entry grommet, see KDL/E 24

17 0.12 – 0.26 in (3.0 – 6.5 mm)

A
A

KDP 24/17/02
Order no.: 87301082 A = Slot for small cable entry grommet, see KDL/E 24

4 0.06 – 0.14 in 1.5 – 3.5 mm
6 0.12 – 0.20 in 3.0 – 5.0 mm
10 0.12 – 0.26 in (3.0 – 6.5 mm)
A
A

KDP 24/20/02
Order no.: 87301084 A = Slot for small cable entry grommet, see KDL/E 24

21 0.10 – 0.20 in 2.5 – 5.0 mm

A
A

KDP 24/21/02
Order no.: 87301086 A = Slot for small cable entry grommet, see KDL/E 24

858
Selection table KDP/F for cables without plugs
X Number of openings

0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.24
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
1.18
X Clamping area in inch

6 0.35 in (9 mm) maximum

4 0.43 in (11 mm) maximum
4 0.71 in (18 mm) maximum

KDP/F 24-14
Order no.: 87302010

16 0.35 in (9 mm) maximum

4 0.43 in (11 mm) maximum
2 0.59 in (15 mm) maximum

KDP/F 24-22
Order no.: 87302020

28 0.35 in (9 mm) maximum

KDP/F 24-28
Order no.: 87302040

46 0.26 in (6.5 mm) maximum

KDP/F 24-46
Order no.: 87302050

4 rectangular openings, 1.06 x 1.18 (27 x 30 mm) maximum

KDP/F 24-multi
Order no.: 87302030

859
Selection table KDP/Z for cables without plugs
X Number of openings

0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.24
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
1.18
X Clamping area in inch

14 0.30 – 0.47 in 7,5 – 12,0 mm

KDP/Z 24/14
Order number: 87303010

2 0.12 – 0.24 in 3,0 – 6,0 mm

4 0.20 – 0.35 in 5,0 – 9,0 mm
3 0.30 – 0.47 in 7,5 – 12,0 mm
3 0.39 – 0.63 in (10,0 – 16,0 mm)
2 0.55 – 0.79 in
14,0 – 20,0 mm
KDP/Z 24/14-1
Order number: 87302020

23 0.20 – 0.35 in 5,0 – 9,0 mm

KDP/Z 24/23
Order number: 87303030

20 0.12 – 0.24 in 3,0 – 6,0 mm

6 0.20 – 0.35 in 5,0 – 9,0 mm
4 0.30 – 0.47 in 7,5 – 12,0 mm

KDP/Z 24/30
Order number: 87303040

20 0.08 – 0.16 in 2,0 – 4,0 mm

28 0.12 – 0.24 in 3,0 – 6,0 mm

KDP/Z 24/48
Order number: 87303050

860
861
Selection table KDP/R for cables without plugs
X Number of openings

0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.30
0.31
0.33
0.35
0.37
0.39
0.43
0.47
0.55
0.63
X Clamping area in inch

3 0.24 – 0.39 in (6 – 10 mm)

1 0.38 – 0.63 in
9.6 – 15.9 mm

KDP/R M50/4
Order no.: 87301030

1 0.12 – 0.22 in 3.0 – 5.5 mm
5 0.20 – 0.36 in (5.0 – 9.2 mm)

KDP/R M50/6
Order no.: 87301032

7 0.14 – 0.26 in (3.5 – 6.5 mm)

1 0.24 – 0.39 in (6 – 10 mm)

KDP/R M50/8
Order no.: 87301034

31 0.06 – 0.12 in 1.5 – 3.1 mm

KDP/R M50/31
Order no.: 87301038

2 0.12 – 0.26 in 3.0 – 6.5 mm
4 0.20 – 0.36 in (5.0 – 9.2 mm)
2 0.38 – 0.63 in
9.6 – 15.9 mm

KDP/R M63/8
Order no.: 87301040

6 0.12 – 0.22 in 3.0 – 5.5 mm
6 0.14 – 0.26 in (3.5 – 6.5 mm)
1 0.24 – 0.39 in (6 – 10 mm)

KDP/R M63/13
Order no.: 87301042

862
Selection table KDP/R for cables without plugs
X Number of openings

0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.30
0.31
0.33
0.35
0.37
0.39
0.43
0.47
0.55
0.63
X Clamping area in inch

19 0.12 – 0.20 in 3 – 5 mm

KDP/R M63/19
Order no.: 87301044

46 0.06 – 0.12 in 1.5 – 3.1 mm

KDP/R M63/46
Order no.: 87301048

Selection table KDPR/F for cables without plugs

X Number of openings
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.30
0.31
0.33
0.35
0.37
0.39
0.43
0.47
0.55
0.63
X Clamping area in inch

2 semi-circular, maximum Ø for 13.5 mm (0.53 in) cables

KDPR/F 40/multi
Order no.: 87302070

8 8.5 mm (0.33 in) maximum

KDPR/F 40/8
Order no.: 87302072

863
Selection table cablequick® metal KDP 90 for cables without plugs
X Number of openings

0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
0.94
1.10
X Clamping area in inch

5 0.63 – 1.10 in
16 – 28 mm

KDP 90/5:
V4A: upon request / ALU: 87663029

8 0.63 – 1.10 in
16 – 28 mm

KDP 90/8
V4A: upon request / ALU: 87663026

0.12 – 0.24 in (3.0 – 6.2 mm) 2

4 0.18 – 0.33 in (4.5 – 8.5 mm)
4 0.24 – 0.39 in (6 – 10 mm)
2 0.35 – 0.55 in 9 – 14 mm
1 0.55 – 0.71 in
14 – 18 mm
KDP 90/13:
V4A: 87663118 / ALU: upon request

0.12 – 0.20 in 9 3 – 5 mm
16 0.16 – 0.31 in (4 – 8 mm)

KDP 90/25:
V4A: upon request / ALU: 87663022

14 0.16 – 0.31 in (4 – 8 mm)

10 0.24 – 0.39 in (6 – 10 mm)
2 0.35 – 0.55 in 9 – 14 mm
2 0.47 – 0.71 in (12 – 18 mm)

KDP 90/28:
V4A: upon request / ALU: 87663032

0.12 – 0.24 in (3 – 6 mm) 24

12 0.16 – 0.31 in (4 – 8 mm)
3 0.31 – 0.47 in 8 – 12 mm

KDP 90/39+3
V4A: 87663038 / ALU: 87663036

864
Selection table cablequick® metal KDP 90 for cables without plugs
X Number of openings

0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
0.94
1.10
X Clamping area in inch

14 0.14 – 0.26 in (3.5 – 6.5 mm)

28 0.18 – 0.33 in (4.5 – 8.5 mm)
4 0.28 – 0.43 in 7 – 11 mm
1 0.43 – 0.63 in 11 – 16 mm

KDP 90/47:
V4A: 87663039 / ALU: 87663037

0.12 – 0.20 in 3 3 – 5 mm
32 0.14 – 0.26 in (3.5 – 6.5 mm)
16 0.16 – 0.31 in (4 – 8 mm)
4 0.31 – 0.47 in 8 – 12 mm

KDP 90/55:
V4A: 87663058 / ALU: upon request

865
Selection table cablequick® metal KDP 100 for cables without plugs
X Number of openings

0.04
0.08
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.94
X Clamping area in inch

6 0.63 – 0.94 in
16 – 24 mm

KDP 100/6:
V4: 87663116 / ALU: upon request

3 0.31 – 0.47 in 8 – 12 mm
12 0.43 – 0.63 in 11 – 16 mm

KDP 100/15:
V4A: 87663120 / ALU: upon request

18 0.31 – 0.47 in 8 – 12 mm

KDP 100/18:
V4A: 87663122 / ALU: upon request

24 0.24 – 0.41 in 6.0 – 10.5 mm

KDP 100/24:
V4A: 87663124 / ALU: upon request

12 0.14 – 0.26 in 3.5 – 6.5 mm
12 0.24 – 0.39 in (6 – 10 mm)
6 0.35 – 0.55 in 9 – 14 mm

KDP 100/30:
V4A: 87663062 / ALU: upon request

12 0.14 – 0.26 in 3.5 – 6.5 mm
12 0.24 – 0.39 in (6 – 10 mm)
4 0.35 – 0.55 in 9 – 14 mm
2 0.47 – 0.71 in (12 – 18 mm)

KDP 100/30B
V4A: 87663063 / ALU: upon request

866
Selection table cablequick® metal KDP 100 for cables without plugs
X Number of openings

0.04
0.08
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.94
X Clamping area in inch

40 0.18 – 0.33 in (4.5 – 8.5 mm)

KDP 100/40:
V4A: 87663061 / ALU: upon request

48 0.14 – 0.26 in (3.5 – 6.5 mm)

8 0.24 – 0.39 in (6 – 10 mm)

KDP 100/56:
V4A: 87663060 / ALU: upon request

0.04 – 0.14 in 48 1.0 – 3.5 mm
8 0.14 – 0.26 in (3.5 – 6.5 mm)

KDP 100/56B
V4A: 87663065 / ALU: upon request

0.04 – 0.14 in 48 1.0 – 3.5 mm
4 0.14 – 0.26 in (3.5 – 6.5 mm)
4 0.24 – 0.39 in (6 – 10 mm)

KDP 100/56C
V4A: 87663067 / ALU: upon request

867
Selection table cablequick® metal KDP 105 for cables without plugs
X Number of openings

0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
0.94
1.02
X Clamping area in inch

9 0.35 – 0.55 in 9 – 14 mm
2 0.47 – 0.71 in (12 – 18 mm)
1 0.71 – 0.98 in
18 – 25 mm

KDP 105/12:
V4A: 87663057 / ALU: 87663056

8 0.24 – 0.39 in (6 – 10 mm)

4 0.35 – 0.55 in 9 – 14 mm
3 0.47 – 0.71 in (12 – 18 mm)

KDP 105/15:
V4A: 87663016 / ALU: 87663014

0.12 – 0.20 in 16 3 – 5 mm
12 0.16 – 0.31 in (4 – 8 mm)
4 0.24 – 0.39 in (6 – 10 mm)

KDP 105/32:
V4A: 87663012 / ALU: 87663010

KDP 105/15 in the control cabinet

868
Selection table cablequick® metal KDP 120/134 for cables without plugs
X Number of openings

0.12
0.16
0.20
0.24
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.94
1.10
1.26
1.42
1.57
1.73
1.93
X Clamping area in inch

2 0.71 – 1.42 in
18 – 36 mm

KDP 120/2:
V4A: 87663140 / ALU: 87663001

2 1.42 – 1.93 in
36 – 49 mm

KDP 120/2B
V4A: 87663141 / ALU: 87663002

1 0.71 – 1.42 in
18 – 36 mm 1 1.42 – 1.93 in
36 – 49 mm

KDP 120/2C
V4A: 87663142 / ALU: 87663003

6 0.24 – 0.39 in 6 – 10 mm
4 0.35 – 0.55 in 9 – 14 mm
3 0.47 – 0.71 in (12 – 18 mm)
4 0.71 – 0.98 in 18 – 25 mm

KDP 120/17:
V4A: 87663143 / ALU: 87663004

0.14 – 0.26 in 8 3.5 – 6.5 mm
18 0.24 – 0.39 in 6 – 10 mm
7 0.38 – 0.63 in (9.6 – 15.9 mm)
2 0.55 – 0.79 in 14 – 20 mm

KDP 120/35:
V4A: 87663144 / ALU: 87663005

3 – 5 mm 2 0.12 – 0.20 in (3 – 5 mm)

6 0.16 – 0.31 in 4 – 8 mm
15 0.24 – 0.39 in 6 – 10 mm
4 0.31 – 0.47 in 8 – 12 mm
5 0.35 – 0.55 in 9 – 14 mm
2 0.55 – 0.79 in 14 – 20 mm
KDP 134/34:
V4A: upon request / ALU: 87663024

869
Selection table cablequick® metal KDP 149 for cables without plugs
X Number of openings

0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
0.94
1.02
1.10
X Clamping area in inch

8 0.24 – 0.39 in (6 – 10 mm)

16 0.39 – 0.55 in 10 – 14 mm
18 0.47 – 0.71 in (12 – 18 mm)
4 0.71 – 0.98 in
18 – 25 mm

KDP 149/46:
V4A: upon request / ALU: 87663064

36 0.24 – 0.39 in (6 – 10 mm)

8 0.35 – 0.55 in 9.0 – 14.0 mm
8 0.55 – 0.71 in 14 – 18 mm
4 0.71 – 0.98 in
18 – 25 mm

KDP 149/56:
V4A: 87663086 / ALU: 87663097

0.14 – 0.24 in (3.5 – 6.2 mm) 30

40 0.24 – 0.39 in (6 – 10 mm)
4 0.43 – 0.63 in (11 – 16 mm)
2 0.47 – 0.71 in (12 – 18 mm)
2 0.71 – 0.98 in
18 – 25 mm
KDP 149/78:
Steel: 87663771

0.14 – 0.26 in (3.5 – 6.5 mm) 16

64 0.18 – 0.33 in (4.5 – 8.5 mm)
36 0.24 – 0.39 in (6 – 10 mm)
4 0.31 – 0.47 in 8 – 12 mm
8 0.35 – 0.55 in 9 – 14 mm
8 0.55 – 0.71 in 14 – 18 mm
KDP 149/140: 4 0.71 – 0.98 in
V4A: 87663088 / ALU: 87663095 18 – 25 mm

0.14 – 0.26 in (3.5 – 6.5 mm) 126

24 0.24 – 0.39 in (6 – 10 mm)
6 0.31 – 0.47 in 8 – 12 mm
2 0.47 – 0.71 in (12 – 18 mm)

KDP 149/158:
V4A: 87663068 / ALU: 87663089

0.14 – 0.26 in (3.5 – 6.5 mm) 250

32 0.24 – 0.39 in (6 – 10 mm)
8 0.31 – 0.47 in 8 – 12 mm
2 0.47 – 0.71 in (12 – 18 mm)

KDP 149/292:
V4A: 87663066 / ALU: 87663079

870
Selection table cablequick® metal KDP 160 for cables without plugs
X Number of openings

0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
0.94
1.02
1.10
X Clamping area in inch

0.14 – 0.26 in (3.5 – 6.5 mm) 16

10 0.35 – 0.55 in (9.0 – 14.0 mm)
40 0.47 – 0.71 in (12 – 18 mm)

KDP 160/66:
V4A: upon request / ALU: 87663761

KDP 149/46: High degree of tightness at IP 65

871
Selection table KDM for cables without plugs
X Number of openings

0.04
0.12
0.20
0.28
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.67
0.71
0.75
0.83
0.91
0.98
1.06
1.14
1.22
1.30
1.38
X Clamping area in inch

0.04 – 0.35 in Ø max. 1 1 – 9 mm Ø max.

KDM M16
Order no.: 87401010

0.04 – 0.51 in (1 – 13 mm) Ø max. 1

KDM M20
Order no.: 87401012

0.04 – 0.71 in (1 – 18 mm) Ø max. 1

KDM M25
Order no.: 87401014

0.04 – 0.98 in (1 – 25 mm) Ø max. 1

KDM M32
Order no.: 87401016

Type KDM cable entry membrane and its applications

872
Selection table KDM/F for cables without plugs
X Number of openings

0.04
0.12
0.20
0.28
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.67
0.71
0.75
0.83
0.91
0.98
1.06
1.14
1.22
1.30
1.38
X Clamping area in inch

0.04 – 0.35 in Ø max. 1 1 – 9 mm Ø max.

KDM/F M16
Order no.: 87401050

0.04 – 0.51 in (1 – 13 mm) Ø max. 1

KDM/F M20
Order no.: 87401052

0.04 – 0.71 in (1 – 18 mm) Ø max. 1

KDM/F M25
Order no.: 87401054

0.04 – 0.98 in (1 – 25 mm) Ø max. 1

KDM/F M32
Order no.: 87401056

873
Selection table KDM/G for cables without plugs
X Number of openings

0.16
0.20
0.24
0.28
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.67
0.71
0.75
0.83
0.91
0.98
1.06
1.14
1.22
1.30
1.38
X Clamping area in inch

0.16 – 0.28 in Ø max. 1 4 - 7 mm Ø max.

KDM/G M12
Order no.: 87401020

1 0.20 – 0.39 in Ø max. 5 – 10 mm Ø max.

KDM/G M16
Order no.: 87401022

1 0.31 – 0.51 in Ø max. 8 – 13 mm Ø max.

KDM/G M20
Order no.: 87401024

1 0.43 – 0.67 in Ø max. 11 – 17 mm Ø max.

KDM/G M25
Order no.: 87401026

1 0.59 – 0.83 in Ø max. 15 – 21 mm Ø max.

KDM/G M32
Order no.: 87401028

1 0.75 – 1.10 in Ø max. 19 – 28 mm Ø max.

KDM/G M40
Order no.: 87401030

1 1.06 – 1.38 in Ø max.
19 – 28 mm Ø max.

KDM/G M50
Order no.: 87401032

874
875
Selection table KDP/EN and KDP/EN-RA 24 for railway technology
X Number of openings

0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
X Clamping area in inch

4 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
3 0.55 – 0.79 in
14 – 20 mm

KDP/EN 24/11
EN: 87301210 / EN-RA: 87301215

12 0.31 – 0.47 in 8 – 12 mm

KDP/EN 24/12
EN: 87301220 / EN-RA: 87301225

2 0.12 – 0.22 in 3.0 – 5.5 mm
6 0.16 – 0.32 in (4.1 – 8.1 mm)
4 0.35 – 0.55 in 9 – 14 mm
1 0.55 – 0.79 in
14 – 20 mm

KDP/EN 24/13
EN: 87301230 / EN-RA: 87301235

6 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
4 0.38 – 0.63 in (9.6 – 15.9 mm)

KDP/EN 24/14
EN: 87301240 / EN-RA: 87301245

17 0.20 – 0.36 in (5.0 – 9.2 mm)

KDP/EN 24/17
EN: 87301250 / EN-RA: 87301255

11 0.12 – 0.26 in (3.0 – 6.5 mm)

1 0.16 – 0.32 in (4.1 – 8.1 mm)
5 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/EN 24/17-1
EN: 87301251 / EN-RA: 87301256

876
Selection table KDP/EN and KDP/EN-RA 24 for railway technology
X Number of openings

0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.71
0.79
0.87
X Clamping area in inch

16 0.12 – 0.26 in (3.0 – 6.5 mm)

4 0.20 – 0.36 in (5.0 – 9.2 mm)
2 0.31 – 0.49 in 8.0 – 12.5 mm

KDP/EN 24/22
EN: 87301260 / EN-RA: 87301265

23 0.16 – 0.32 in (4.1 – 8.1 mm)

KDP/EN 24/23
EN: 87301270 / EN-RA: 87301275

29 0.12 – 0.26 in (3.0 – 6.5 mm)

KDP/EN 24/29
EN: 87301280 / EN-RA: 87301285

1.5 – 2.6 78
2 0.10 – 0.20 in 2.5 – 5.0 mm

KDP/EN 24/80
EN: 87301290 / EN-RA: 87301295

KDP/EN plus room integrity mat results in KDP/EN-RA Expanded room integrity mat after heat application

877
878
KDL/C, KDL/D and KDL/H cable entry systems

879
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDL/C cable entry system

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The KDL/C cable entry system is used for • Uninterrupted cable guidance
inserting pre-assembled cables. The KDL/C • Easy assembly -22 – 212 °F
system is a splittable system that enables • Integrated strain relief Frame: Polypropylene (PP)
the quick and simple installation of up to 48 • Fits standard cut-out dimensions Block: TPE
pre-assembled cables with a high packing • Protection class IP 54.
V0
density in control cabinets and terminal • Matching grommets: KDT/X
boxes. IP 54 (with suitable grommets and
cables)

Type Order No. Color No. Pack

Openings qty.
Small / medium / large
For standard cut-out size 24
KDL/C 24/12 87141012 Black 12 / 0 / 0 1
KDL/C 24/9 87141024 Black 8/1/0 1
KDL/C 24/8 87141020 Black 6/2/0 1
KDL/C 24/4 87141016 Black 0/4/0 1

For standard cut-out size 16

KDL/C 16/8 87141028 Black 8/0/0 1
KDL/C 16/7 87141032 Black 6/1/0 1
KDL/C 16/3 87141036 Black 0/3/0 1

For standard cut-out size 10

KDL/C 10/6 87141040 Black 6/0/0 1
KDL/C 10/5 87141043 Black 4/1/0 1
KDL/C 10/2 87141041 Black 0/2/0 1

For standard cut-out size 6

KDL/C 6/4 87141046 Black 4/0/0 1

880
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDL/C cable entry system (Continued...)

Dimension table

Type Order No. Installation height (EH) A B a b c d e

inch inch inch inch inch inch inch inch

For standard cut-out size 24

KDL/C 24/12 87141012 0.59 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/C 24/9 87141024 0.59 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/C 24/8 87141020 0.59 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/C 24/4 87141016 0.59 5.83 2.28 4.41 1.42 2.56 0.63 0.22

For standard cut-out size 16

KDL/C 16/8 87141028 0.59 4.76 2.28 3.39 1.42 2.03 0.63 0.22
KDL/C 16/7 87141032 0.59 4.76 2.28 3.39 1.42 2.03 0.63 0.22
KDL/C 16/3 87141036 0.59 4.76 2.28 3.39 1.42 2.03 0.63 0.22

For standard cut-out size 10

KDL/C 10/6 87141040 0.59 3.98 2.28 2.56 1.42 1.63 0.63 0.22
KDL/C 10/5 87141043 0.59 3.98 2.28 2.56 1.42 1.63 0.63 0.22
KDL/C 10/2 87141041 0.59 3.98 2.28 2.56 1.42 1.63 0.63 0.22

For standard cut-out size 6

KDL/C 6/4 87141046 0.59 2.91 2.28 1.81 1.42 1.14 0.63 0.22

881
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDL/D cable entry system

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The KDL/D cable entry system is used for • Uninterrupted cable guidance
inserting pre-assembled cables. The KDL/D • Easy assembly -22 – 212 °F
system is a splittable system that enables • Integrated strain relief Frame: Polypropylene (PP)
the quick and simple installation of up to 48 • Fits standard cut-out dimensions Block: TPE
pre-assembled cables with a high packing • High protection class IP65
V0
density in control cabinets and terminal • KDL/D-R M50/4: Cut-out 50.5 mm
boxes. In addition, the KDL/D system offers a (round) IP 65 (with suitable grommets and
very high protection class and a very robust • Matching grommets: KDT/X cables)
design.

Type Order No. Color No. Pack

Openings qty.
Small / medium / large
For standard cut-out size 24
KDL/D 24/12 87141010 Black 12 / 0 / 0 1
KDL/D 24/9 87141022 Black 8/1/0 1
KDL/D 24/8 87141018 Black 6/2/0 1
KDL/D 24/4 87141014 Black 0/4/0 1
KDL/D 24/3 87141013 Black 0/1/2 1

For standard cut-out size 16

KDL/D 16/8 87141026 Black 8/0/0 1
KDL/D 16/7 87141030 Black 6/1/0 1
KDL/D 16/2 87141033 Black 0/0/2 1
KDL/D 16/3 87141034 Black 0/3/0 1

For standard cut-out size 10

KDL/D 10/6 87141038 Black 6/0/0 1
KDL/D 10/5 87141042 Black 4/1/0 1
KDL/D 10/2 87141039 Black 0/2/0 1

For standard cut-out size 6

KDL/D 6/4 87141044 Black 4/0/0 1

Special size
KDL/D 1/6 87141048 Black 6/0/0 1
KDL/D-R M50/4 87141002 Black 4/0/0 1

882
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDL/D cable entry system (Continued...)

Dimension table

Type Order No. Installation height (EH) A B a b c d e

inch inch inch inch inch inch inch inch

For standard cut-out size 24

KDL/D 24/12 87141010 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/D 24/9 87141022 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/D 24/8 87141018 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/D 24/4 87141014 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/D 24/3 87141013 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22

For standard cut-out size 16

KDL/D 16/8 87141026 0.71 4.76 2.28 3.39 1.42 2.03 0.63 0.22
KDL/D 16/7 87141030 0.71 4.76 2.28 3.39 1.42 2.03 0.63 0.22
KDL/D 16/2 87141033 0.71 4.76 2.28 3.39 1.42 2.03 0.63 0.22
KDL/D 16/3 87141034 0.71 4.76 2.28 3.39 1.42 2.03 0.63 0.22

For standard cut-out size 10

KDL/D 10/6 87141038 0.71 3.98 2.28 2.56 1.42 1.63 0.63 0.22
KDL/D 10/5 87141042 0.71 3.98 2.28 2.56 1.42 1.63 0.63 0.22
KDL/D 10/2 87141039 0.71 3.98 2.28 2.56 1.42 1.63 0.63 0.22

For standard cut-out size 6

KDL/D 6/4 87141044 0.71 2.91 2.28 1.81 1.42 1.14 0.63 0.22

Special size
KDL/D 1/6 87141048 0.71 5.83 1.50 4.41 0.67 2.56 0.22
KDL/D-R M50/4 87141002 0.71 2.44 2.44 0.91 0.91 0.22

883
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDL/D-mono cable entry system

PRODUCT INFORMATION SPECIFICATIONS

The KDL/D-mono is a split cable entry • Easy assembly and installation of pre-as-
system for inserting pre-assembled cables. sembled cables -22 – 212 °F
Depending on the choice of cable entry • Integrated and split seal
grommet, up to four cables can be in- • Simple strain relief for the cables using Polyamide 6
troduced. The split lock nut is included within cable ties
V0
the scope of delivery. • Matching grommets: KDT/X
IP 65

Type Order No. Color No. Thread Pack

Openings qty.
Small / medium / large
KDL/D-mono 1 M25 87141610 Black 1/0/0 M25x1,5 5
KDL/D-mono 1 M32 87141620 Black 0/1/0 M32x1,5 5
KDL/D-mono 1 M40 87141636 Black 0/1/0 M40x1,5 5
KDL/D-mono 2 M40 87141630 Black 2/0/0 M40x1,5 5
KDL/D-mono 1 M50 87141640 Black 0/0/1 M50x1,5 5

Dimension table

Type Order No. Installation height (EH) Thread length (GL) Diameter (D) Width across flats (SW1/SW2)
inch inch inch inch

KDL/D-mono 1 M25 87141610 0.73 0.59 1.57 1.42 / 1.1

KDL/D-mono 1 M32 87141620 0.71 0.59 1.97 1.81 / 1.42
KDL/D-mono 1 M40 87141636 0.71 0.79 2.44 2.17 / 1.81
KDL/D-mono 2 M40 87141630 0.71 0.79 2.44 2.17 / 1.81
KDL/D-mono 1 M50 87141640 0.87 0.79 2.44 2.17 / 2.17

884
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDL/H cable entry system

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

KDL/H is manufactured in a zinc die-cast • Cable infeed without interruption
process and is designed for feed-through of • Standardized cut-out dimensions -22 – 212 °F
pre-assembled cables. The KDL/D system • Easy assembly Frame: ZN
is a splittable system that enables the quick • High protection category to IP 69K (in Block: TPE
and easy installation of up to 48 pre-assem- combination with the proper enclosure) Frame: Aluminum
bled cables with a high packing density in • Very robust construction IP 66/67 (with suitable grommets and
control cabinets and terminal boxes. • Integrated strain relief cables)
Special benefits of the KDL/H are: • Matching grommets: KDT/X
• KDL/H M50/4: Cut-out 50.5 mm (round)

Type Order No. Color No. Pack

Openings qty.
Small / medium / large
For standard cut-out size 24
KDL/H 24/12 87141410 Black 12 / 0 / 0 1
KDL/H 24/4 87141412 Black 0/4/0 1
KDL/H 24/3 87141414 Black 0/1/2 1

For standard cut-out size 16

KDL/H 16/8 87141418 Black 8/0/0 1
KDL/H 16/3 87141416 Black 0/3/0 1
KDL/H 16/2 87141420 Black 0/0/2 1

Special size
KDL/H 1/6 87141422 Black 6/0/0 1
KDL/H M50/4 87141424 Black 4/0/0 1

Dimension table

Type Order No. Installation height (EH) A B a b c d e

inch inch inch inch inch inch inch inch

For standard cut-out size 24

KDL/H 24/12 87141410 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/H 24/4 87141412 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22
KDL/H 24/3 87141414 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22

For standard cut-out size 16

KDL/H 16/8 87141418 0.71 4.76 2.28 3.39 1.42 2.03 0.63 0.22
KDL/H 16/3 87141416 0.71 4.76 2.28 3.39 1.42 2.03 0.63 0.22
885
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDL/H cable entry system (Continued...)

c c

d Øe
b
d
a

Type Order No. Installation height (EH) A B a b c d e

inch inch inch inch inch inch inch inch

KDL/H 16/2 87141420 0.71 4.76 2.28 3.39 1.42 2.03 0.63 0.22

Special size
KDL/H 1/6 87141422 0.71 5.83 1.50 4.41 0.67 2.56 0.63 0.22
KDL/H M50/4 87141424 0.71 2.44 2.44 0.91 0.91 0.22

886
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDT/X cable entry grommets

PRODUCT INFORMATION SPECIFICATIONS

For example, in conjunction with the KDL/C, Double cable grommets, multi-line grom-
KDL/D and KDL/H cable entry systems, the mets, ASI bushings, USB-grommets and -22 – 212 °F
KDT/X cable entry grommet can be used to adapter grommets are not cURus listed.
easily route pre-assembled cables into and TPE
through control cabinets. The grommet is
V0
retrofitted around the cable.

Type Order No. Color for Ø For opening No. of openings Pack
inch Small / medium / large qty.

Grommet, small
KDT/X 02 87141210 Black 0.08 – 0.12 •/-/- 1 12
KDT/X 03 87141212 Black 0.12 – 0.16 •/-/- 1 12
KDT/X 04 87141214 Black 0.16 – 0.20 •/-/- 1 12
KDT/X 05 87141216 Black 0.20 – 0.24 •/-/- 1 12
KDT/X 06 87141218 Black 0.24 – 0.28 •/-/- 1 12
KDT/X 07 87141220 Black 0.28 – 0.31 •/-/- 1 12
KDT/X 08 87141222 Black 0.31 – 0.35 •/-/- 1 12
KDT/X 09 87141224 Black 0.35 – 0.39 •/-/- 1 12
KDT/X 10 87141226 Black 0.39 – 0.43 •/-/- 1 12
KDT/X 11 87141228 Black 0.43 – 0.47 •/-/- 1 12

Grommet, medium
KDT/X 12 87141230 Black 0.47 – 0.51 -/•/- 1 4
KDT/X 13 87141232 Black 0.51 – 0.55 -/•/- 1 4
KDT/X 14 87141234 Black 0.55 – 0.59 -/•/- 1 4
KDT/X 15 87141236 Black 0.59 – 0.63 -/•/- 1 4
KDT/X 16 87141238 Black 0.63 – 0.67 -/•/- 1 4
KDT/X 17 87141240 Black 0.67 – 0.71 -/•/- 1 4
KDT/X 18 87141242 Black 0.71 – 0.75 -/•/- 1 4
KDT/X 19 87141244 Black 0.75 – 0.79 -/•/- 1 4
KDT/X 20 87141246 Black 0.79 – 0.83 -/•/- 1 4
KDT/X 21 87141248 Black 0.83 – 0.87 -/•/- 1 4

Grommet, large
KDT/X 22 87141250 Black 0.87 – 0.91 -/-/• 1 4
KDT/X 23 87141252 Black 0.91 – 0.94 -/-/• 1 4
887
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDT/X cable entry grommets (Continued...)

Type Order No. Color for Ø For opening No. of openings Pack
inch Small / medium / large qty.

KDT/X 24 87141254 Black 0.94 – 0.98 -/-/• 1 4

KDT/X 25 87141256 Black 0.98 – 1.02 -/-/• 1 4
KDT/X 26 87141258 Black 1.02 – 1.06 -/-/• 1 4
KDT/X 27 87141260 Black 1.06 – 1.10 -/-/• 1 4
KDT/X 28 87141262 Black 1.10 – 1.14 -/-/• 1 4
KDT/X 29 87141264 Black 1.14 – 1.18 -/-/• 1 4

Dummy grommet
BTK/X (dummy grommet) 87141270 Black •/-/- 1 12
BTG/X dummy grommet 87141266 Black -/•/- 1 4
BTG/XL dummy grommet 87141265 Black -/-/• 4

Double cable grommet

KDT/X 2x21) 87141275 Black 0.08 •/-/- 2 12
KDT/X 2x3 1)
87141277 Black 0.12 •/-/- 2 12
KDT/X 2x4 1)
87141279 Black 0.16 •/-/- 2 12
KDT/X 2x51) 87141281 Black 0.20 -/•/- 2 4
KDT/X 2x6 1)
87141283 Black 0.24 -/•/- 2 4
KDT/X 2x71) 87141285 Black 0.28 -/•/- 2 4
KDT/X 2x8 1)
87141287 Black 0.31 -/•/- 2 4

Multi-line sleeve 4-line

KDT/X 4x21) 87141276 Black 0.08 •/-/- 4 12
KDT/X 4x31) 87141278 Black 0.12 •/-/- 4 12
KDT/X 4x4 1)
87141280 Black 0.16 •/-/- 4 12
KDT/X 4x5 1)
87141282 Black 0.20 -/•/- 4 4
KDT/X 4x61) 87141284 Black 0.24 -/•/- 4 4
KDT/X 4x7 1)
87141286 Black 0.28 -/•/- 4 4
KDT/X 4x8 1)
87141288 Black 0.31 -/•/- 4 4

Grommet adapter (adapter for small grommet)

ATG/X2) 87141268 Black -/•/- 4

ASI bushing (for ASI line)

KDT/X 1xASI2) 87141274 Black -/•/- 4
KDT/X 2xASI 2)
87141272 Black -/•/- 4

888
KDL/C, KDL/D AND KDL/H CABLE ENTRY SYSTEMS

KDT/X cable entry grommets (Continued...)

Type Order No. Color for Ø For opening No. of openings Pack
inch Small / medium / large qty.

USB grommet
KDT/X-USB 0.5m2) 87141294 Black -/• 1
KDT/X-USB 1.0m 2)
87141296 Black -/•/- 1
KDT/X-USB 3.0m2) 87141298 Black -/•/- 1

LAN port
KDT/X-LAN 87141292 Black -/-/• 1

Adapter grommet (for center grommet)

ATG/XL Adapter grommet 87141267 Black -/-/• 4

1)
no UR-approval / unused openings can be closed off with Type VST sealing plugs
2)
No UR approval

889
890
KDL/E cable entry system

891
KDL/E CABLE ENTRY SYSTEM

KDL/E cable entry system

c c

d Øe
B b
d
a
A

PRODUCT INFORMATION SPECIFICATIONS

The KDL/E represents the 3rd generation of • Fits standard cut-outs for connectors (e.g.
Murrplastik cable entry systems. Harting, Wieland and Rittal) -40.00 – 176 °F
• Simple realization of EMC solution with
• Even quicker mounting of pre-assembled discharge plate. Polyamide 6.6
cables. • Matching grommets KDT/xE
V0
• Snap in, meaning screwing on is no
longer absolutely necessary IP 54 (with suitable grommets and
• Catch hook for 0.06 – 0.08 inch cables)
plate thickness included with delivery,
additional catch hooks for up to 0.16 inch
plate thickness available

Type Order No. Color No. of openings for Ø Pack

small / large inch qty.

For standard cut-out size 16

KDL/E 16/21) 87121010 Black 0/2 0.63 – 1.22 1
KDL/E 16/4 1)
87121011 Black 4/0 0.12 – 0.63 1
KDL/E 16/51) 87121012 Black 4/1 0.12 – 1.22 1
KDL/E 16/8 1)
87121014 Black 8/0 0.12 – 0.63 1

For standard cut-out size 24

KDL/E 24/42) 87121016 Black 2/2 0.12 – 1.22 1
KDL/E 24/72) 87121018 Black 6/1 0.12 – 1.22 1
KDL/E 24/10 2)
87121020 Black 10 / 0 0.12 – 0.63 1

1)
If catch hooks are used, then the width of the cut-out must be enlarged by 91 mm (3.58 in)
2)
For matching adapter plates or floor plates, see chapter “Accessories for cable entry systems and plates”

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

For standard cut-out size 16

KDL/E 16/21) 87121010 0.61 4.57 2.28 3.39 1.42 2.03 0.63 0.22
KDL/E 16/4 1)
87121011 0.61 4.57 2.28 3.39 1.42 2.03 0.63 0.22
KDL/E 16/51) 87121012 0.61 4.57 2.28 3.39 1.42 2.03 0.63 0.22
KDL/E 16/8 1)
87121014 0.61 4.57 2.28 3.39 1.42 2.03 0.63 0.22

892
KDL/E CABLE ENTRY SYSTEM

KDL/E cable entry system (Continued...)

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

For standard cut-out size 24

KDL/E 24/42) 87121016 0.61 5.75 2.28 4.41 1.42 2.56 0.63 0.22
KDL/E 24/72) 87121018 0.61 5.75 2.28 4.41 1.42 2.56 0.63 0.22
KDL/E 24/10 2)
87121020 0.61 5.75 2.28 4.41 1.42 2.56 0.63 0.22

893
KDL/E CABLE ENTRY SYSTEM

KDT/xE cable entry grommets

PRODUCT INFORMATION SPECIFICATIONS

The KDT/xE cable entry grommet can be Strain relief for type KDT/ZE is achieved
used in conjunction with the KDL/E cable using a simple cable tie. Type KDT/VE is a -40.00 – 176 °F
entry systems, e.g. to easily route pre-as- variable grommet without strain relief which
sembled cables into and through control covers a larger clamping range. Thermoplastic rubber
cabinets. The grommet is 2-pce. and is
HB
positioned about the cable. The grommets
are equipped with catch hooks that anchor
themselves in the KDL/E when installed.

Type Order No. Color for Ø For opening No. of openings Suitable for Pack
inch small / large Conduit qty.

Grommet, small
KDT/ZE 03 87121210 Black 0.12 – 0.16 •/- 1 10
KDT/ZE 04 87121212 Black 0.16 – 0.20 •/- 1 10
KDT/ZE 05 87121214 Black 0.20 – 0.24 •/- 1 10
KDT/ZE 06 87121216 Black 0.24 – 0.28 •/- 1 10
KDT/ZE 07 87121218 Black 0.28 – 0.31 •/- 1 10
KDT/ZE 08 87121220 Black 0.31 – 0.35 •/- 1 10
KDT/ZE 09 87121222 Black 0.35 – 0.39 •/- 1 10
KDT/ZE 10 87121224 Black 0.39 – 0.43 •/- 1 10
KDT/ZE 11 87121226 Black 0.43 – 0.47 •/- 1 10
KDT/ZE 12 87121228 Black 0.47 – 0.51 •/- 1 10
KDT/ZE 13 87121230 Black 0.51 – 0.55 •/- 1 10
KDT/ZE 14 87121232 Black 0.55 – 0.59 •/- 1 10
KDT/ZE 15 87121234 Black 0.59 – 0.63 •/- 1 10

Grommet, large
KDT/ZE 16 87121236 Black 0.63 – 0.67 -/• 1 10
KDT/ZE 17 87121238 Black 0.67 – 0.71 -/• 1 10
KDT/ZE 18 87121240 Black 0.71 – 0.75 -/• 1 10
KDT/ZE 19 87121242 Black 0.75 – 0.79 -/• 1 10
KDT/ZE 20 87121244 Black 0.79 – 0.83 -/• 1 10
KDT/ZE 21 87121246 Black 0.83 – 0.87 -/• 1 10
KDT/ZE 22 87121248 Black 0.87 – 0.91 -/• 1 10
KDT/ZE 23 87121250 Black 0.91 – 0.94 -/• 1 10
KDT/ZE 24 87121252 Black 0.94 – 0.98 -/• 1 10
KDT/ZE 25 87121254 Black 0.98 – 1.02 -/• 1 10
KDT/ZE 26 87121256 Black 1.02 – 1.06 -/• 1 10
894
KDL/E CABLE ENTRY SYSTEM

KDT/xE cable entry grommets (Continued...)

Type Order No. Color for Ø For opening No. of openings Suitable for Pack
inch small / large Conduit qty.

KDT/ZE 27 87121258 Black 1.06 – 1.10 -/• 1 10

KDT/ZE 28 87121260 Black 1.10 – 1.14 -/• 1 10
KDT/ZE 29 87121262 Black 1.14 – 1.18 -/• 1 10
KDT/ZE 30 87121264 Black 1.18 – 1.22 -/• 1 10

Variable cable grommet (Protection class IP 42)

KDT/VE 3–71) 87121272 Black 0.12 – 0.28 •/- 1 10
KDT/VE 7-10 1)
87121274 Black 0.28 – 0.39 •/- 1 10

Multi-line sleeve 2-line

KDT/ZE 2x4 double grommet2) 87121284 Black 0.16 •/- 2 10
KDT/ZE 2x5 double grommet2) 87121286 Black 0.20 •/- 2 10
KDT/ZE 2x6 double grommet 2)
87121288 Black 0.24 •/- 2 10
KDT/ZE 2xASI double grommet1) 87121280 Black •/- 2 10
KDT/ZE 2x8 double grommet 2)
87121291 Black 0.31 •/- 2 10

Multi-line sleeve 4-line

KDT/ZE 2x7 double grommet2) 87121290 Black 0.28 •/- 2 10
KDT/ZE 4x2 quadruple grommet 2)
87121292 Black 0.08 •/- 4 10
KDT/ZE 4x3 quadruple grommet2) 87121293 Black 0.12 •/- 4 10
KDT/ZE 4x4 quadruple grommet 2)
87121294 Black 0.16 •/- 4 10
KDT/ZE 4x5 quadruple grommet2) 87121295 Black 0.20 •/- 4 10
KDT/ZE 4x6 quadruple grommet 2)
87121296 Black 0.24 •/- 4 10

ASI bushing (for ASI line)

KDT/ZE ASI1) 87121282 Black •/- 1 10

Dummy plug for ASI grommet

BST KDT/ZE ASI1) 87121281 Black 10

Grommet adapter (adapter for small grommet)

ATG/E1) 87121268 Black -/• 1 10

Conduit grommet
SDT/ZE 071) 87174250 Black •/- 1 M10/P07 10
SDT/ZE 09 1)
87174252 Black •/- 1 M12/P09 10
SDT/ZE 11 1)
87174254 Black •/- 1 M16/P11 10
SDT/ZE 161) 87174256 Black -/• 1 M20/P16 10
SDT/ZE 21 1)
87174258 Black -/• 1 M25/P21 10

Dummy grommet
BTK/E 87121266 Black •/- 0 10
BTG/E 87121270 Black -/• 0 10

1)
No UR approval
2)
no UR-approval / unused openings can be closed off with Type VST sealing plugs

895
896
KDL/S cable entry system

897
KDL/S CABLE ENTRY SYSTEM

KDL/S 16 cable entry system

a
c c

d Øe
B b b
d
a
A

PRODUCT INFORMATION SPECIFICATIONS

The KDL/S cable entry system is a custom • Fits standard cut-outs for 16-pole con-
plate that allows various kinds of cables to nectors (e.g. Harting, Wieland and Rittal). -40.00 – 176 °F
be inserted to accommodate customers’ • Individual solutions
requests and to be able to seal openings. • Matching grommets: KDT/S Polyamide 6.6
The internal KDT/S grommet can be custom
V0
designed based on the customer’s desires.
IP 54 (with suitable grommets and
cables)

Type Order No. Color Pack

qty.

For standard cut-out size 16

KDL/S 16 87173004 Black 1

Dimension table

Type Order No. A B C D a b c d e EH

inch inch inch inch inch inch inch inch inch inch

For standard cut-out size 16

KDL/S 16 87173004 4.57 2.28 3.23 1.69 3.39 1.42 2.03 0.63 0.22 0.59

898
KDL/S CABLE ENTRY SYSTEM

KDL/S 24 cable entry system

a
a

B
B b
b

A
A

PRODUCT INFORMATION SPECIFICATIONS

The KDL/S 24 cable entry system is a cus- • Individual solutions
tom plate that allows various kinds of cables • Matching grommets: KDT/S-K and KDT/ -40.00 – 176 °F
to be inserted to accommodate customers’ S-G
requests and to be able to seal openings. The Polyamide 6.6
internal KDT/S-K and KDT/S-G grommets
V0
can be custom designed based on the cus-
tomer requests.

Type Order No. Color Pack

qty.

KDL/S-G 24 87173032 Black 1

KDL/S-G 24/2 87173036 Black 1
KDL/S-G-K 24/3 87173038 Black 1
KDL/S-K 24 87173030 Black 1
KDL/S-K 24/4 87173034 Black 1

Dimension table

Type Order No. A B a b

inch inch inch inch

KDL/S-G 24 87173032 5.59 2.28 5.12 1.26

KDL/S-G 24/2 87173036 5.59 4.02 5.12 1.50
KDL/S-G-K 24/3 87173038 5.59 4.02 5.12 1.50
KDL/S-K 24 87173030 5.59 2.28 5.12 1.26
KDL/S-K 24/4 87173034 5.59 4.02 5.12 1.50

899
KDL/S CABLE ENTRY SYSTEM

KDT/S 16 cable entry grommets

PRODUCT INFORMATION SPECIFICATIONS

The KDT/S cable entry grommets can be • Individual solutions
manufactured to meet the customer’s -40.00 – 176 °F
specifications. They can provide solutions for
the most varied of applications, e.g. insertion Thermoplastic rubber
of cables in the most varied of shapes or
HB
sealing of openings for pass-through metal
wiring that must be sealed off.

Type Order No. Color No. for Ø For ribbon cable Version Pack
Openings inch inch qty.

KDT/S 2x15 87175444 Black 2 0.59 two-part 1

KDT/S 2x24 – 28 87175447 Black 2 0.94 – 1.10 two-part 1
KDT/S 2x28 – 32 87175443 Black 2 1.10 – 1.26 two-part 1
KDT/S 2x35 87175440 Black 2 1.38 two-part 1
KDT/S 6x17.5 87175441 Black 6 0.69 one-piece 1
KDT/S 6x20.3 87175445 Black 6 0.80 one-piece 1
KDT/S 56x13 87175442 Black 2 2.2 x 0.51 two-part 1
KDT/S 56x13 B 87175448 Black 2 2.2 x 0.51 one-piece 1
KDT/S 67x12 B 87175446 Black 2 2.64 x 0.47 one-piece 1
KDT/S 67x12 C 87175449 Black 2 2.64 x 0.47 two-part 1
KDT/S Blind 87175437 Black one-piece 1

900
KDL/S CABLE ENTRY SYSTEM

KDT/S 24 cable entry grommets

PRODUCT INFORMATION SPECIFICATIONS

The KDT/S cable entry grommets can be
manufactured to meet the customer’s Individual solutions -40.00 – 176 °F
specifications. They can provide solutions for
the most varied of applications, e.g. insertion Thermoplastic rubber
of cables in the most varied of shapes or
HB
sealing of openings for pass-through metal
wiring that must be sealed off.

Type Order No. Color Pack

qty.

KDT/S-K Blind 87175402 Black 1

KDT/S - G blanking / blind / dummy 87175404 Black 1

Dimension table

Type Order No.

KDT/S-K Blind 87175402

KDT/S - G blanking / blind / dummy 87175404

901
902
KDL Jumbo cable entry system

903
KDL JUMBO CABLE ENTRY SYSTEM

KDL-Jumbo cable entry system

A

PRODUCT INFORMATION SPECIFICATIONS

The KDL-Jumbo cable entry system is used • Cable infeed without interruption
for inserting pre-assembled cables. The KDL- • Very robust and completely splittable -22 – 212 °F
Jumbo system is a fully splittable system that system
enables the quick and simple installation of • Integrated, permanent (captive) seal Polyamide 6.6, PUR
1 or 2 pre-assembled cables or corrugated • High protection class IP65
V0
conduits with a diameter of between 30 mm • Labeling with KSS 20x9 and KSS 10x8
and 65 mm in control cabinets and terminal labels IP 65 (with suitable grommets and
boxes. Particular benefits of the KDL-Jumbo • Integrated strain relief at the grommets cables)
noise attenuation liner: • Fire classification V0 per UL94
• Supply includes all mounting materials.

Type Order No. Color for Ø No. Pack

inch Openings qty.

KDL-Jumbo 1 87176110 Black 1.18 – 2.56 1 1

KDL-Jumbo 2 87176120 Black 1.18 – 2.56 2 1

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDL-Jumbo 1 87176110 1.38 4.33 4.57 3.54 3.54 2.24 3.98 0.28
KDL-Jumbo 2 87176120 1.38 7.87 4.57 7.09 3.54 5.79 3.98 0.28

904
KDL JUMBO CABLE ENTRY SYSTEM

KDT/Z-Jumbo cable entry grommets

PRODUCT INFORMATION SPECIFICATIONS

The cable entry grommet KDT/Z-Jumbo
allows the fitting of cables from 30-65 mm in -22 – 212 °F
size in the openings of the KDL-Jumbo cable
entry system. The grommet has two parts, TPE-S
and is aligned and installed with the frame
V0
halves together around the cable. Strain relief
can be provided quickly and easily for cables
using cable ties.

Type Order No. Color for Ø No. Pack

inch Openings qty.

KDT/Z-Jumbo 30-35 87176212 Black 1.18 – 1.38 1 1

KDT/Z-Jumbo 35-40 87176214 Black 1.38 – 1.57 1 1
KDT/Z-Jumbo 40-45 87176216 Black 1.57 – 1.77 1 1
KDT/Z-Jumbo 45-50 87176218 Black 1.77 – 1.97 1 1
KDT/Z-Jumbo 50-55 87176220 Black 1.97 – 2.17 1 1
KDT/Z-Jumbo 55-60 87176222 Black 2.17 – 2.36 1 1
KDT/Z-Jumbo 60-65 87176224 Black 2.36 – 2.56 1 1

Dummy grommet
BT-Jumbo 87176210 Black 1

905
906
KDP cable entry plate, plastic, rectangular

907
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/N 24 cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

Second generation of our cable entry plates standard cut-outs for 24-pin Harting and
plastic, square with improved clip-in function. Wieland connectors. For snap-in fastening -22 – 158 °F
Economical connection technology for tool- and/or screwing in place. Enclosure: Polyamide 6.6
free wiring of equipment and machinery. Seal: TPU / NBR / EPDM
Wherever the rapid and economical • Snap-in at plate thicknesses of 0.06 to
IP 65
introduction of cables and/or pneumatic 0.08 inch
hoses in confined spaces is essential. The • High degree of strain relief
alternative to cable fittings. Suitable for • 2 elastomer panels (seals)

Type Order No. Color No. Openings Pack

Openings Quantity / Ø inch qty.

KDP/N 24/10 87301108 Black 10 2x 0.12 – 0.26 1

1x 0.2 – 0.36
5x 0.35 – 0.55
2x 0.55 – 0.79
KDP/N 24/11 87301110 Black 11 4x 0.12 – 0.26 1
4x 0.2 – 0.36
3x 0.55 – 0.79
KDP/N 24/12 87301120 Black 12 12x 0.31 – 0.47 1
KDP/N 24/13 87301130 Black 13 2x 0.12 – 0.22 1
6x 0.16 – 0.32
4x 0.35 – 0.55
1x 0.55 – 0.79
KDP/N 24/14 87301140 Black 14 6x 0.12 – 0.26 1
4x 0.2 – 0.36
4x 0.38 – 0.63
KDP/N 24/17 87301150 Black 17 17x 0.2 – 0.36 1
KDP/N 24/17-1 87301151 Black 17 11x 0.12 – 0.26 1
1x 0.16 – 0.32
5x 0.31 – 0.49
KDP/N 24/22 87301160 Black 22 16x 0.12 – 0.26 1
4x 0.2 – 0.36
2x 0.31 – 0.49
KDP/N 24/23 87301170 Black 23 23x 0.16 – 0.32 1
KDP/N 24/29 87301180 Black 29 29x 0.12 – 0.26 1
KDP/N 24/80 87301190 Black 80 78x 0.06 – 0.1 1
2x 0.1 – 0.2

908
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/N 24 cable entry plate, plastic (Continued...)

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP/N 24/10 87301108 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/11 87301110 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/12 87301120 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/13 87301130 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/14 87301140 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/17 87301150 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/17-1 87301151 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/22 87301160 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/23 87301170 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/29 87301180 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/N 24/80 87301190 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22

909
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/X 24 cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

Fourth Generation of our cable entry plates, alternative to cable fittings. Suitable for
plastic, square, with improved clip-in function standard cut-outs for 24-pin Harting and -22 – 158 °F
and one instead of two elastomer plates. Wieland connectors. For snap-in fastening Enclosure: Polyamide 6.6
Economical connection technology for tool- and/or screwing in place. Seal: TPU / EPDM
free wiring of equipment and machinery.
IP 65
Wherever the rapid and economical • Snap-in at plate thicknesses of 0.06 to
introduction of cables and/or pneumatic 0.08 inch
hoses in confined spaces is essential. The • High degree of strain relief

Type Order No. Color No. Openings Pack

Openings Quantity / Ø inch qty.

KDP/X 24/10 87301305 Black 10 2x 0.12 – 0.26 1

1x 0.2 – 0.36
5x 0.35 – 0.55
2x 0.55 – 0.79
KDP/X 24/11 87301315 Black 11 4x 0.12 – 0.26 1
4x 0.2 – 0.36
3x 0.55 – 0.79
KDP/X 24/12 87301325 Black 12 12x 0.31 – 0.47 1
KDP/X 24/13 87301335 Black 13 2x 0.12 – 0.22 1
6x 0.16 – 0.32
4x 0.35 – 0.55
1x 0.55 – 0.79
KDP/X 24/14 87301345 Black 14 6x 0.12 – 0.26 1
4x 0.2 – 0.36
4x 0.38 – 0.63
KDP/X 24/17 87301355 Black 17 17x 0.2 – 0.36 1
KDP/X 24/17-1 87301356 Black 17 11x 0.12 – 0.26 1
1x 0.16 – 0.32
5x 0.31 – 0.49
KDP/X 24/22 87301365 Black 22 16x 0.12 – 0.26 1
4x 0.2 – 0.36
2x 0.31 – 0.49
KDP/X 24/23 87301375 Black 23 23x 0.16 – 0.32 1
KDP/X 24/29 87301385 Black 29 29x 0.12 – 0.26 1

910
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/X 24 cable entry plate, plastic (Continued...)

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP/X 24/10 87301305 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/11 87301315 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/12 87301325 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/13 87301335 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/14 87301345 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/17 87301355 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/17-1 87301356 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/22 87301365 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/23 87301375 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/X 24/29 87301385 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22

911
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/E 24 cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

Third Generation of our cable entry plates, Wieland connectors. For snap-in fastening
plastic, square, with improved clip-in function and/or screwing in place. -22 – 158 °F
and one instead of two elastomer plates. Frame: Polyamide 6.6
Economical connection technology for tool- • Snap-in at plate thicknesses of 0.06 to Seal: TPU / EPDM
free wiring of equipment and machinery. 0.08 inch
IP 65
Wherever the rapid and economical • Lower strain relief
introduction of cables and/or pneumatic • Introduction of larger cable diameters is
hoses in confined spaces is essential. The possible
alternative to cable fittings. Suitable for • Introduction from both sides is possible
standard cut-outs for 24-pin Harting and
Type Order No. Color No. Openings Pack
Openings Quantity / Ø inch qty.

KDP/E 24/11 87301310 Black 11 4x 0.12 – 0.26 1

4x 0.2 – 0.36
3x 0.55 – 0.79
KDP/E 24/12 87301320 Black 12 12x 0.31 – 0.47 1
KDP/E 24/13 87301330 Black 13 2x 0.12 – 0.22 1
6x 0.16 – 0.32
4x 0.35 – 0.55
1x 0.55 – 0.79
KDP/E 24/14 87301340 Black 14 6x 0.12 – 0.26 1
4x 0.2 – 0.36
4x 0.38 – 0.63
KDP/E 24/17 87301350 Black 17 17x 0.2 – 0.36 1
KDP/E 24/17-1 87301351 Black 17 11x 0.12 – 0.26 1
1x 0.16 – 0.32
5x 0.31 – 0.49
KDP/E 24/22 87301360 Black 22 16x 0.12 – 0.26 1
4x 0.2 – 0.36
2x 0.31 – 0.49
KDP/E 24/23 87301370 Black 23 23x 0.16 – 0.32 1
KDP/E 24/29 87301380 Black 29 29x 0.12 – 0.26 1

912
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/E 24 cable entry plate, plastic (Continued...)

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP/E 24/11 87301310 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/12 87301320 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/13 87301330 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/14 87301340 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/17 87301350 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/17-1 87301351 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/22 87301360 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/23 87301370 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/E 24/29 87301380 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22

913
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP 24-Multi cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The cable entry plates, type KDP 24-Multi • Catch hook for 0.06 – 0.08 inch
are a combination of our KDP system and plate thickness included with delivery, -22 – 158 °F
our cable entry strips KDL/E They are ideal additional catch hooks for up to 0.16 inch Enclosure: Polyamide
for situations where a few cables with plugs plate thickness available Seal: TPU / NBR / EPDM
have to be brought into the control cabinet
IP 54
next to cables without plugs. These cable
entry plates take up to four preassembled
cables in two grommets.

Type Order No. Color No. Openings No. Pack

Openings Quantity / Ø inch Grommets qty.

KDP 24/10/02 87301076 Black 10 4x 0.12 – 0.26 2 1

2x 0.18 – 0.33
4x 0.31 – 0.49
KDP 24/14/02 87301078 Black 14 4x 0.1 – 0.2 2 1
2x 0.12 – 0.26
8x 0.18 – 0.33
KDP 24/15/02 87301080 Black 15 2x 0.06 – 0.14 2 1
11x 0.12 – 0.26
2x 0.33 – 0.49
KDP 24/17/02 87301082 Black 17 17x 0.12 – 0.26 2 1
KDP 24/20/02 87301084 Black 20 4x 0.06 – 0.14 2 1
6x 0.12 – 0.2
10x 0.12 – 0.26
KDP 24/21/02 87301086 Black 21 21x 0.1 – 0.2 2 1

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP 24/10/02 87301076 0.61 2.28 5.75 4.41 1.42 2.56 0.63 0.22
KDP 24/14/02 87301078 0.61 2.28 5.75 4.41 1.42 2.56 0.63 0.22
KDP 24/15/02 87301080 0.61 2.28 5.75 4.41 1.42 2.56 0.63 0.22
KDP 24/17/02 87301082 0.61 2.28 5.75 4.41 1.42 2.56 0.63 0.22
KDP 24/20/02 87301084 0.61 2.28 5.75 4.41 1.42 2.56 0.63 0.22
KDP 24/21/02 87301086 0.61 2.28 5.75 4.41 1.42 2.56 0.63 0.22

914
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/F 24 cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The KDP/F 24 cable entry plate is an • Enormous time savings in assembly
entry and fastening system for cables and • High packing density -22 – 158 °F
pneumatic hoses such as those used in con- • Large wire diameter ranges Frame: Polypropylene (PP)
trol cabinets, plant or machine construction. • Several cables may be fed through an Seal: TPE
Wherever quick assembly, cable-protection opening together
HB
and high packing density are required, this • Very flat design
cable entry plate can be used. IP 65

Type Order No. Color No. Openings Pack

Openings Quantity / Ø inch qty.

KDP/F 24-14 87302010 Black 14 6x max. 0.35 1

4x max. 0.43
4x max. 0.71
KDP/F 24-14 87302011 Black 14 6x max. 0.35 100
4x max. 0.43
4x max. 0.71
KDP/F 24-22 87302020 Black 22 16x max. 0.35 1
4x max. 0.43
2x max. 0.59
KDP/F 24-22 87302021 Black 22 16x max. 0.35 100
4x max. 0.43
2x max. 0.59
KDP/F 24-28 87302040 Black 28 28x max. 0.35 1
KDP/F 24-28 87302041 Black 28 28x max. 0.35 100
KDP/F 24-46 87302050 Black 46 46x max. 0.26 1
KDP/F 24-46 87302051 Black 46 46x max. 0.26 100
KDP/F 24-multi 87302030 Black 3 3x max. 1.06 1
KDP/F 24-multi 87302031 Black 3 3x max. 1.06 100

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP/F 24-14 87302010 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-14 87302011 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-22 87302020 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
915
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/F 24 cable entry plate, plastic (Continued...)

c c

d Øe
b
d
a

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP/F 24-22 87302021 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-28 87302040 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-28 87302041 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-46 87302050 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-46 87302051 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-multi 87302030 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22
KDP/F 24-multi 87302031 0.39 5.83 2.36 4.41 1.42 2.56 0.63 0.22

916
KDP CABLE ENTRY PLATE, PLASTIC, RECTANGULAR

KDP/Z 24 cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The KDP/Z 24 cable entry plate is an • Enormous time savings in assembly
entry and fastening system for cables and • High packing density -22 – 158 °F
pneumatic hoses such as those used in con- • Large wire diameter ranges Frame: Polypropylene (PP)
trol cabinets, plant or machine construction. • Good strain relief Seal: TPE
Wherever quick assembly, cable-protection • Very flat design V0 Frame:
and high packing density are required, this HB Seal:
cable entry plate can be used. IP 65

Type Order No. Color No. Openings Pack

Openings Quantity / Ø inch qty.

KDP/Z 24/14 87303010 Black 14 14x 0.3 – 0.47 5

KDP/Z 24/14-1 87303020 Black 14 2x 0.12 – 0.24 5
4x 0.2 – 0.35
3x 0.3 – 0.47
3x 0.39 – 0.63
2x 0.55 – 0.79
KDP/Z 24/23 87303030 Black 23 23x 0.2 – 0.35 5
KDP/Z 24/30 87303040 Black 30 20x 0.12 – 0.24 5
6x 0.2 – 0.35
4x 0.3 – 0.47
KDP/Z 24/48 87303050 Black 48 28x 0.12 – 0.24 5
20x 0.08 – 0.16

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP/Z 24/14 87303010 5.87 2.40 4.41 1.42 2.56 0.63 0.22
KDP/Z 24/14-1 87303020 5.87 2.40 4.41 1.42 2.56 0.63 0.22
KDP/Z 24/23 87303030 5.87 2.40 4.41 1.42 2.56 0.63 0.22
KDP/Z 24/30 87303040 5.87 2.40 4.41 1.42 2.56 0.63 0.22
KDP/Z 24/48 87303050 5.87 2.40 4.41 1.42 2.56 0.63 0.22

917
918
KDP cable entry plate, plastic, round

919
CABLE ENTRY PLATE KDP PLASTIC, ROUND

KDP/R cable entry plate, plastic, round

B
D

PRODUCT INFORMATION SPECIFICATIONS

Economical connection technology for tool- • For snapping into 0.06 – 0.08 inch plates
free wiring of equipment and machinery. • Integrated seal -22 – 194 °F
Extremely quick mounting of cables and • Compact design Enclosure: Polyamide 6.6
pneumatic hoses. The alternative to cable • High protection class Seal: NBR / EPDM
fittings. For snap-in fastening or screwing in
IP 65
place with a lock nut. Lock nut not included
with delivery!

Type Order No. Color No. of openings Openings Thread A B C D Pack

Total Quantity / Ø inch metric inch inch inch inch qty.

KDP/R M50/04 87301030 Black 4 3x 0.24 – 0.39 M50x1,5 2.28 0.35 0.94 1.99 1
1x 0.38 – 0.63
KDP/R M50/06 87301032 Black 6 1x 0.12 – 0.22 M50x1,5 2.28 0.35 0.94 1.99 1
5x 0.2 – 0.36
KDP/R M50/08 87301034 Black 8 7x 0.14 – 0.26 M50x1,5 2.28 0.35 0.94 1.99 1
1x 0.24 – 0.39
KDP/R M50/311) 87301038 Black 31 31x 0.06 – 0.12 M50x1,5 2.28 0.35 0.94 1.99 1
KDP/R M63/08 87301040 Black 8 2x 0.12 – 0.26 M63x1,5 2.80 0.35 0.98 2.50 1
4x 0.2 – 0.36
2x 0.38 – 0.63
KDP/R M63/13 87301042 Black 13 6x 0.12 – 0.22 M63x1,5 2.80 0.35 0.98 2.50 1
6x 0.14 – 0.26
1x 0.24 – 0.39
KDP/R M63/19 87301044 Black 19 19x 0.12 – 0.2 M63x1,5 2.80 0.35 0.98 2.50 1
KDP/R M63/461) 87301048 Black 46 46x 0.06 – 0.12 M63x1,5 2.80 0.35 0.98 2.50 1

1)
No UR approval

920
CABLE ENTRY PLATE KDP PLASTIC, ROUND

KDP/R-KGM cable entry plate, plastic, round

B
D

PRODUCT INFORMATION SPECIFICATIONS

Economical connection technology for tool- • For snapping into 0.06 – 0.08 inch plates
free wiring of equipment and machinery. • Integrated seal -22 – 194 °F
Extremely quick mounting of cables and • Compact design Enclosure: Polyamide 6.6
pneumatic hoses. The alternative to cable • High protection class Seal: NBR / EPDM
fittings. For snap-in fastening or screwing in • Supply includes the lock nut
IP 65
place with a lock nut.

Type Order No. Color No. of openings Openings Thread A B C D Pack

Total Quantity / Ø inch metric inch inch inch inch qty.

KDP/R-KGM M50/04 87301031 Black 4 3x 0.24 – 0.39 M50x1,5 2.28 0.35 0.94 1.99 1
1x 0.38 – 0.63
KDP/R-KGM M50/06 87301033 Black 6 1x 0.12 – 0.22 M50x1,5 2.28 0.35 0.94 1.99 1
5x 0.2 – 0.36
KDP/R-KGM M50/08 87301035 Black 8 7x 0.14 – 0.26 M50x1,5 2.28 0.35 0.94 1.99 1
1x 0.24 – 0.39
KDP/R-KGM M50/31 87301039 Black 31 31x 0.06 – 0.12 M50x1,5 2.28 0.35 0.94 1.99 1
KDP/R-KGM M63/08 87301041 Black 8 2x 0.12 – 0.26 M63x1,5 2.80 0.35 0.98 2.50 1
4x 0.2 – 0.36
2x 0.38 – 0.63
KDP/R-KGM M63/13 87301043 Black 13 6x 0.12 – 0.22 M63x1,5 2.80 0.35 0.98 2.50 1
6x 0.14 – 0.26
1x 0.24 – 0.39
KDP/R-KGM M63/19 87301045 Black 19 19x 0.12 – 0.2 M63x1,5 2.80 0.35 0.98 2.50 1
KDP/R-KGM M63/46 87301049 Black 46 46x 0.06 – 0.12 M63x1,5 2.80 0.35 0.98 2.50 1

921
CABLE ENTRY PLATE KDP PLASTIC, ROUND

KDPR/F cable entry plate, plastic, round

B
D

PRODUCT INFORMATION SPECIFICATIONS

The KDPR/F cable entry plate is made of Special benefits of the KDPR/F are:
modified Polypropylene and is a round entry -22 – 158 °F
and fastening system for cables without • Enormous time savings in assembly Frame: Polypropylene (PP)
plugs and pneumatic hoses such as those • High packing density Seal: TPE
used in control cabinets, plant or machine • Standardized cut-out dimensions
HB
construction. Wherever quick assembly is • Large wire diameter ranges
required with high packing density and ca- • Several cables may be fed through an IP 65
bles must be protected, the cable insertion opening together
system is used. • Very flat design

Type Order No. Color Openings Thread metric B D Pack

Quantity / Ø inch inch inch qty.

KDPR/F 40/8 87302072 Black 8x max. 0.33 M40x1,5 0.26 1.59 5

KDPR/F 40/multi 87302070 Black 2x max. 0.55 M40x1,5 0.26 1.59 5

922
KDP cablequick® cable entry plate, metal, rectangular

923
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 90 (90x90 mm)

C
Øe

A
b

B a

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- food and chemical areas. Integrated threaded
minal boxes, control cabinets for tool-free bolts mean that no screws are visible from -22 – 194 °F
introduction of actuators, sensors, measuring outside. Mounting set included in delivery.
and control instrumentation, optoelectronic, Seal: NBR / EPDM
pneumatic lines and drive technology into • V4A : 1.4571
IP 65
a control panel. The stainless steel version • ALU : 3.3535
is particularly suitable for application in the • ST : 137

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 90/13 V4A 87663118 Smoothed 13 2x 0.12 – 0.24 1
4x 0.18 – 0.33
4x 0.24 – 0.39
2x 0.35 – 0.55
1x 0.55 – 0.71

Dimension table

Type Order No. A B a b c e

inch inch inch inch inch inch

KDP 90/13 V4A 87663118 3.54 3.54 75 2.52 2.52 0.18

924
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 90 (90x144 mm)

c c

d Øe

A
b

B
a

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- food and chemical areas. Integrated threaded
minal boxes, control cabinets for tool-free bolts mean that no screws are visible from -22 – 194 °F
introduction of actuators, sensors, measuring outside. Mounting set included in delivery.
and control instrumentation, optoelectronic, Seal: NBR / EPDM
pneumatic lines and drive technology into • V4A : 1.4571
IP 65
a control panel. The stainless steel version • ALU : 3.3535
is particularly suitable for application in the • ST : 137

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 90/25 ALU 87663022 RAL 7035 25 9x 0.12 – 0.2 1
16x 0.16 – 0.31

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP 90/25 ALU 87663022 3.54 5.67 4.29 2.80 1.61 1.56 0.22

925
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 90 (90x221 mm)

c c

d f Øe
A
b
d f

B a

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- threaded bolts mean that no screws are
minal boxes, control cabinets for tool-free visible from outside. Mounting set included -22 – 194 °F
introduction of actuators, sensors, measuring in delivery.
and control instrumentation, optoelectronic, Seal: NBR / EPDM
pneumatic lines and drive technology into • V4A : 1.4571
IP 65
a control panel. The stainless steel version • ALU : 3.3535
is particularly suitable for applications in • ST : 137
the food and chemical industry. Integrated • Rittal cut-out 2

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 90/18 V4A1) 87663028 Smoothed 18 9x 0.24 – 0.39 1
8x 0.47 – 0.71
1x 0.71 – 0.98
KDP 90/28 ALU 87663032 RAL 7035 28 14x 0.16 – 0.31 1
KDP 90/28 V4A 87663034 Smoothed 28 10x 0.24 – 0.39 1
2x 0.35 – 0.55
2x 0.47 – 0.71
KDP 90/47 ALU 1)
87663037 RAL 7035 47 14x 0.14 – 0.26 1
28x 0.18 – 0.33
4x 0.28 – 0.43
1x 0.43 – 0.63
KDP 90/47 V4A1) 87663039 Smoothed 47 14x 0.14 – 0.26 1
28x 0.18 – 0.33
4x 0.28 – 0.43
1x 0.43 – 0.63
KDP 90/55 V4A 87663058 Smoothed 55 3x 0.12 – 0.2 1
32x 0.12 – 0.24
16x 0.16 – 0.31
4x 0.31 – 0.47

1)
No UR approval

926
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 90 (90x221 mm) (Continued...)

Dimension table

Type Order No. A B a b c d e f

inch inch inch inch inch inch inch inch

KDP 90/18 V4A1) 87663028 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50
KDP 90/28 ALU 87663032 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50
KDP 90/28 V4A 87663034 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50
KDP 90/47 ALU 1)
87663037 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50
KDP 90/47 V4A1) 87663039 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50
KDP 90/55 V4A 87663058 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50

927
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 90+3 (90x221 mm)

c c

d f Øe
A
b
d f

B a

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- release lock. The stainless steel version
minal boxes, control cabinets for tool-free is particularly suitable for applications in -22 – 194 °F
introduction of actuators, sensors, measuring the food and chemical industry. Integrated
and control instrumentation, optoelectronic, threaded bolts mean that no screws are Seal: NBR / EPDM
pneumatic lines and drive technology into visible from outside. Mounting set included
IP 65
a control panel. The cut-out of the KDP in delivery.
90/39+3 enables up to three pre-assem-
bled cables with a maximum plug size of 48 • V4A : 1.4571
x 24 mm to be introduced. The connector • ALU : 3.3535
grommet is simply inserted into the plate and • ST : 137
locked from behind by means of a quick- • Rittal cut-out 2
Type Order No. Color No. Openings Pack
Openings No. qty.
Ø inch
KDP 90/39+3 ALU 87663036 RAL 7035 42 24x 0.12 – 0.24 1
12x 0.16 – 0.31
3x 0.31 – 0.47
KDP 90/39+3 V4A 87663038 Smoothed 42 24x 0.12 – 0.24 1
12x 0.16 – 0.31
3x 0.31 – 0.47

Dimension table

Type Order No. A B a b c d e f

inch inch inch inch inch inch inch inch

KDP 90/39+3 ALU 87663036 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50
KDP 90/39+3 V4A 87663038 3.54 8.70 7.56 2.44 3.98 1.42 0.18 1.50

928
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 90 (90x294 mm)

c c c c

d Øe
A
b
d

B a

PRODUCT INFORMATION SPECIFICATIONS

Cable entry plate for insertion of power ca- • V4A : 1.4571
bles. Ideally suited for roof or floor openings • ALU : 3.3535 -22 – 194 °F
at switch cabinets. • ST : 137
The stainless steel version is particularly suit- Seal: NBR / EPDM
able for application in the food and chemical
IP 65
areas. Integrated threaded bolts mean that
no screws are visible from outside. Mounting
set included in delivery.

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 90/5 ALU1) 87663029 RAL 7035 5 5x 0.63 – 1.1 1

1)
Maximum cable lug width of power cables is 1.26 inch (32.0 mm)

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP 90/5 ALU1) 87663029 3.54 11.57 10.67 2.80 2.76 1.56 0.22

929
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 90 (90x394 mm)

c c c c

d Øe
A
b
d
B
a

PRODUCT INFORMATION SPECIFICATIONS

Cable entry plate for insertion of power ca- • V4A : 1.4571
bles. Ideally suited for roof or floor openings • ALU : 3.3535 -22 – 194 °F
at switch cabinets. • ST : 137
The stainless steel version is particularly suit- Seal: NBR / EPDM
able for application in the food and chemical
IP 65
areas. Integrated threaded bolts mean that
no screws are visible from outside. Mounting
set included in delivery.

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 90/8 ALU1) 87663026 RAL 7035 8 8x 0.63 – 1.1 1

1)
Maximum cable lug width of power cables is 1.26 inch (32.0 mm)

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP 90/8 ALU1) 87663026 3.54 15.51 14.61 2.80 3.74 1.56 0.22

930
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 100 (100x145 mm)

c c

d Øe

A b

B a

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- The stainless steel version is particularly suit-
minal boxes, control cabinets for tool-free able for applications in the food and chemical -22 – 194 °F
introduction of actuators, sensors, measuring industry. Integrated threaded bolts mean that
and control instrumentation, optoelectronic, no screws are visible from outside. Mounting Seal: NBR / EPDM
pneumatic lines and drive technology into a set included in delivery.
IP 65
control panel. KDPs of the product group 100
fits into standard cut-outs for Rittal and Sarel • V4A : 1.4571
cabinets when combined with adapter plates. • ALU : 3.3535
These adapter plates can be configured • ST : 137
individually.

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 100/6 V4A 87663116 Smoothed 6 6x 0.63 – 0.94 1
KDP 100/15 V4A 87663120 Smoothed 15 3x 0.31 – 0.47 1
12x 0.43 – 0.63
KDP 100/18 V4A 87663122 Smoothed 18 18x 0.31 – 0.47 1
KDP 100/24 V4A 87663124 Smoothed 24 24x 0.24 – 0.41 1
KDP 100/30 V4A 87663062 Smoothed 30 12x 0.14 – 0.24 1
12x 0.24 – 0.39
6x 0.35 – 0.55
KDP 100/30B V4A 87663063 Smoothed 30 12x 0.14 – 0.24 1
12x 0.24 – 0.39
4x 0.35 – 0.55
2x 0.47 – 0.71
KDP 100/40 V4A 87663061 Smoothed 40 40x 0.18 – 0.33 1
KDP 100/56 V4A 87663060 Smoothed 56 48x 0.14 – 0.24 1
8x 0.24 – 0.39
KDP 100/56B V4A 87663065 Smoothed 56 48x 0.04 – 0.14 1
8x 0.14 – 0.26
KDP 100/56C V4A 87663067 Smoothed 56 48x 0.04 – 0.14 1
4x 0.14 – 0.26
4x 0.24 – 0.39

931
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 100 (100x145 mm) (Continued...)

c c

d Øe

A b

B a

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP 100/6 V4A 87663116 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/15 V4A 87663120 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/18 V4A 87663122 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/24 V4A 87663124 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/30 V4A 87663062 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/30B V4A 87663063 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/40 V4A 87663061 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/56 V4A 87663060 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/56B V4A 87663065 3.94 5.71 5.20 3.23 1.97 1.77 0.18
KDP 100/56C V4A 87663067 3.94 5.71 5.20 3.23 1.97 1.77 0.18

932
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 105 (105x155 mm)

c c

Øe
d

A
b

a
B

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- The stainless steel version is particularly suit-
minal boxes, control cabinets for tool-free able for applications in the food and chemical -22 – 194 °F
introduction of actuators, sensors, measuring industry. Integrated threaded bolts mean that
and control instrumentation, optoelectronic, no screws are visible from outside. Mounting Seal: NBR / EPDM
pneumatic lines and drive technology into a set included in delivery.
IP 65
control panel. KDPs of the product group 105
fits into standard cut-outs for Rittal and Sarel • V4A : 1.4571
cabinets when combined with adapter plates. • ALU : 3.3535
These adapter plates can be configured • ST : 137
individually.
Type Order No. Color No. Openings Pack
Openings No. qty.
Ø inch
KDP 105/12 ALU 87663056 RAL 7035 12 9x 0.35 – 0.55 1
2x 0.47 – 0.71
1x 0.71 – 0.98
KDP 105/12 V4A 87663057 Smoothed 12 9x 0.35 – 0.55 1
2x 0.47 – 0.71
1x 0.71 – 0.98
KDP 105/15 ALU 87663014 RAL 7035 15 8x 0.24 – 0.39 1
4x 0.35 – 0.63
3x 0.47 – 0.71
KDP 105/15 V4A 87663016 Smoothed 15 8x 0.24 – 0.39 1
4x 0.35 – 0.55
3x 0.47 – 0.71
KDP 105/32 ALU 87663010 RAL 7035 32 16x 0.12 – 0.2 1
12x 0.16 – 0.31
4x 0.24 – 0.39
KDP 105/32 V4A 87663012 Smoothed 32 16x 0.12 – 0.2 1
12x 0.16 – 0.31
4x 0.24 – 0.39

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP 105/12 ALU 87663056 4.13 6.10 5.20 3.23 2.81 1.83 0.22
KDP 105/12 V4A 87663057 4.13 6.10 5.20 3.23 2.81 1.83 0.22
KDP 105/15 ALU 87663014 4.13 6.10 5.20 3.23 2.81 1.83 0.22
933
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 105 (105x155 mm) (Continued...)

c c

Øe
d

A
b

a
B

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP 105/15 V4A 87663016 4.13 6.10 5.20 3.23 2.81 1.83 0.22
KDP 105/32 ALU 87663010 4.13 6.10 5.20 3.23 2.81 1.83 0.22
KDP 105/32 V4A 87663012 4.13 6.10 5.20 3.23 2.81 1.83 0.22

934
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 120 (120x190 mm)

c c
g g

Øe
d

A
b

B a

PRODUCT INFORMATION SPECIFICATIONS

Tool-less, rational connection technology Integrated threaded bolts mean that no
for the electrical power sector. Performance screws are visible from outside. Mounting set -22 – 194 °F
cables and services are sealed and fed into included in delivery.
control cabinets or junction boxes and are Seal: NBR / EPDM
supported flexibly. • V4A : 1.4571
IP 65
The stainless steel version is particularly suit- • ALU : 3.3535
able for application in the food and chemical • ST : 137
areas.

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 120/17 V4A 87663143 Smoothed 17 6x 0.24 – 0.39 1
4x 0.35 – 0.55
3x 0.47 – 0.71
4x 0.71 – 0.98
KDP 120/2 B V4A 87663141 Smoothed 2 2x 1.42 – 1.93 1
KDP 120/2 C V4A 87663142 Smoothed 2 1x 0.71 – 1.42 1
1x 1.42 – 1.93
KDP 120/2 V4A 87663140 Smoothed 2 2x 0.71 – 1.42 1
KDP 120/35 V4A 87663144 Smoothed 35 8x 0.14 – 0.26 1
18x 0.24 – 0.39
7x 0.38 – 0.63
2x 0.55 – 0.79
KDP 120/2 ALU 87663001 RAL 7035 2 2x 0.71 – 1.42 1
KDP 120/2 B ALU 87663002 RAL 7035 2 2x 1.42 – 1.93 1
KDP 120/2 C ALU 87663003 RAL 7035 2 1x 0.71 – 1.42 1
1x 1.42 – 1.93
KDP 120/17 ALU 87663004 RAL 7035 17 6x 0.24 – 0.39 1
4x 0.35 – 0.55
3x 0.47 – 0.71
4x 0.71 – 0.98
KDP 120/35 ALU 87663005 RAL 7035 35 8x 0.14 – 0.26 1
18x 0.24 – 0.39
7x 0.38 – 0.63
2x 0.55 – 0.79

935
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 120 (120x190 mm) (Continued...)

c c
g g

Øe
d

A
b

B a

Dimension table

Type Order No. A B a b c d e g

inch inch inch inch inch inch inch inch

KDP 120/17 V4A 87663143 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/2 B V4A 87663141 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/2 C V4A 87663142 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/2 V4A 87663140 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/35 V4A 87663144 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/2 ALU 87663001 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/2 B ALU 87663002 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/2 C ALU 87663003 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/17 ALU 87663004 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56
KDP 120/35 ALU 87663005 4.72 7.48 6.46 3.70 3.46 2.09 0.22 2.56

936
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 134 (134x254 mm)

c c

d Øe
A
b
g
d

a
B

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- Integrated threaded bolts mean that no
minal boxes, control cabinets for tool-free screws are visible from outside. Mounting set -22 – 194 °F
introduction of actuators, sensors, measuring included in delivery.
and control instrumentation, optoelectronic, Seal: NBR / EPDM
pneumatic lines and drive technology into a • V4A : 1.4571
IP 65
control panel. • ALU : 3.3535
The stainless steel version is particularly suit- • ST : 137
able for application in the food and chemical
areas.

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 134/34 ALU 87663024 RAL 7035 34 2x 0.12 – 0.2 1
6x 0.16 – 0.31
15x 0.24 – 0.39
4x 0.31 – 0.47
5x 0.35 – 0.55
2x 0.55 – 0.79

Dimension table

Type Order No. A B a b c d e g

inch inch inch inch inch inch inch inch

KDP 134/34 ALU 87663024 5.28 10 9.09 4.37 3.56 2.40 0.22 4.76

937
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 149 (149x339 mm)

c c
g g

Øe
d
b

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- The stainless steel version is particularly suit-
minal boxes, control cabinets for tool-free able for applications in the food and chemical -22 – 194 °F
introduction of actuators, sensors, measuring industry. Integrated threaded bolts mean that
and control instrumentation, optoelectronic, no screws are visible from outside. Mounting Seal: NBR / EPDM
pneumatic lines and drive technology into a set included in delivery.
IP 65
control panel. KDPs of product group 149
can be fitted directly into the standard cut- V4A : 1.4571
outs of Rittal cabinets. ALU : 3.3535
ST : 137
Rittal cut-out 4

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 149/158, Alu 87663089 RAL 7035 158 126x 0.14 – 0.24 1
24x 0.24 – 0.39
6x 0.31 – 0.47
2x 0.47 – 0.71
KDP 149/56, Alu 87663097 RAL 7035 56 36x 0.24 – 0.39 1
8x 0.35 – 0.55
8x 0.55 – 0.71
4x 0.71 – 0.98
KDP 149/78 ST1) 87663771 RAL 7035 78 30x 0.14 – 0.26 1
40x 0.24 – 0.39
4x 0.43 – 0.63
2x 0.47 – 0.71
2x 0.71 – 0.98
KDP 149/56 V4A 87663086 Smoothed 56 36x 0.24 – 0.39 1
8x 0.35 – 0.55
8x 0.55 – 0.71
4x 0.71 – 0.98
KDP 149/158 V4A 87663068 Smoothed 158 126x 0.14 – 0.24 1
24x 0.24 – 0.39
6x 0.31 – 0.47
2x 0.47 – 0.71

1)
No UR approval

938
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 149 (149x339 mm) (Continued...)

Dimension table

Type Order No. A B a b c d e g

inch inch inch inch inch inch inch inch

KDP 149/158, Alu 87663089 5.87 13.35 11.93 4.53 6.36 2.62 0.20 4.72
KDP 149/56, Alu 87663097 5.87 13.35 11.93 4.53 6.36 2.62 0.20 4.72
KDP 149/78 ST1) 87663771 5.87 13.35 11.93 4.53 6.36 2.62 0.20 4.72
KDP 149/56 V4A 87663086 5.87 13.35 11.93 4.53 6.36 2.62 0.20 4.72
KDP 149/158 V4A 87663068 5.87 13.35 11.93 4.53 6.36 2.62 0.20 4.72

939
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 149 (149x534 mm)

c c
g g g g

d Øe
b
d

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- The stainless steel version is particularly suit-
minal boxes, control cabinets for tool-free able for application in the food and chemical -22 – 194 °F
introduction of actuators, sensors, measuring areas. Integrated threaded bolts mean that
and control instrumentation, optoelectronic, no screws are visible from outside. Mounting Seal: NBR / EPDM
pneumatic lines and drive technology into a set included in delivery.
IP 65
control panel. KDPs of product group 149
can be fitted directly into the standard cut- • V4A : 1.4571
outs of Rittal cabinets. • ALU : 3.3535
• ST : 137
• Rittal cut-out 5

Type Order No. Color No. Openings Pack

Openings No. qty.
Ø inch
KDP 149/140 ALU 87663095 RAL 7035 140 16x 0.14 – 0.24 1
64x 0.18 – 0.33
36x 0.24 – 0.39
4x 0.31 – 0.47
8x 0.35 – 0.55
8x 0.55 – 0.71
4x 0.71 – 0.98
KDP 149/292 ALU 87663079 RAL 7035 292 250x 0.14 – 0.24 1
32x 0.24 – 0.39
8x 0.31 – 0.47
2x 0.47 – 0.71
KDP 149/46 ALU 87663064 RAL 7035 46 8x 0.24 – 0.39 1
16x 0.39 – 0.55
18x 0.47 – 0.71
4x 0.71 – 0.98
KDP 149/140 V4A 87663088 Smoothed 140 16x 0.14 – 0.24 1
64x 0.18 – 0.33
36x 0.24 – 0.39
4x 0.31 – 0.47
8x 0.35 – 0.55
8x 0.55 – 0.71
4x 0.71 – 0.98
KDP 149/292 V4A 87663066 Smoothed 292 250x 0.14 – 0.24 1
32x 0.24 – 0.39
8x 0.31 – 0.47
2x 0.47 – 0.71
940
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 149 (149x534 mm) (Continued...)

Dimension table

Type Order No. A B a b c d e g

inch inch inch inch inch inch inch inch

KDP 149/140 ALU 87663095 5.87 21.02 19.69 4.53 10.20 2.62 0.20 4.33
KDP 149/292 ALU 87663079 5.87 21.02 19.69 4.53 10.20 2.62 0.20 4.33
KDP 149/46 ALU 87663064 5.87 21.02 17.01 4.02 10.20 2.62 0.16 4.33
KDP 149/140 V4A 87663088 5.87 21.02 19.69 4.53 10.20 2.62 0.20 4.33
KDP 149/292 V4A 87663066 5.87 21.02 19.69 4.53 10.20 2.62 0.20 4.33

941
KDP CABLEQUICK® CABLE ENTRY PLATE, METAL, RECTANGULAR

cablequick® Type 160 (160x400 mm)

PRODUCT INFORMATION SPECIFICATIONS

Efficient connection technology for ter- areas. Integrated threaded bolts mean that
minal boxes, control cabinets for tool-free no screws are visible from outside. Mounting -22 – 194 °F
introduction of actuators, sensors, measuring set included in delivery.
and control instrumentation, optoelectronic, Seal: NBR / EPDM
pneumatic lines and drive technology into a • V4A : 1.4571
IP 65
control panel. • ALU : 3.3535
The stainless steel version is particularly suit- • ST : 137
able for application in the food and chemical

Type Order No. Color Openings Pack

No. qty.
Ø inch
KDP 160/66 ALU 87663761 RAL 7035 16x 0.14 – 0.26 1
10x 0.35 – 0.55
40x 0.47 – 0.71

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

KDP 160/66 ALU 87663761 15.75 6.30 14.41 4.92 3.76 2.80 0.22

942
KDM cable entry membranes

943
KDM CABLE ENTRY MEMBRANES

KDM cable entry membrane

Ø

EH

PRODUCT INFORMATION SPECIFICATIONS

KDM is a cable entry system for cables • Easy no-tool push-fit installation
without plug connectors. The various sizes fit • Extremely high tightness IP66 -40.00 – 176 °F
to metrical cut-outs from M16 to M32. • Very flexible diameter ranges (more than Enclosure: Polyethylene
one cable option) Seal: TPE
• Fits on standard cut-outs of M16 to M32 IP 66 from plate thickness of 0.08 in
(2.0 mm). IP 65 for plate thickness of
0.06-0.08 in (1.5-2.0 mm)

Type Order No. Color for Ø EH D Pack

inch inch inch qty.

KDM M16 87401010 Gray 0.04 – 0.35 0.06 0.64 50

KDM M20 87401012 Gray 0.04 – 0.51 0.06 0.80 50
KDM M25 87401014 Gray 0.04 – 0.71 0.06 1.00 50
KDM M32 87401016 Gray 0.04 – 0.98 0.06 1.28 50

944
KDM CABLE ENTRY MEMBRANES

KDM/F cable entry membrane

Ø

EH

PRODUCT INFORMATION SPECIFICATIONS

KDM/F is a self-extinguishing cable entry • Easy no-tool push-fit installation
system for cables without plug connectors. • Extremely high tightness IP66 -40.00 – 176 °F
The various sizes fit to metrical cut-outs from • Very flexible diameter ranges (more than Enclosure: Polyethylene
M16 to M32. one cable option) Seal: TPE
• Self-extinguishing material per UL94 V2
V2
• Fits on standard cut-outs of M16 to M32
IP 66 from plate thickness of 0.08 in
(2.0 mm). IP 65 for plate thickness of
0.06-0.08 in (1.5-2.0 mm)

Type Order No. Color for Ø EH D Pack

inch inch inch qty.

KDM/F M16 87401050 Cream 0.04 – 0.35 0.06 0.64 50

KDM/F M20 87401052 Cream 0.04 – 0.51 0.06 0.80 50
KDM/F M25 87401054 Cream 0.04 – 0.71 0.06 1.00 50
KDM/F M32 87401056 Cream 0.04 – 0.98 0.06 1.28 50

945
KDM CABLE ENTRY MEMBRANES

KDM/G cable entry membrane

Ø

EH
TL

PRODUCT INFORMATION SPECIFICATIONS

KDM/G is a cable entry system for cables • Easy no-tool push-fit installation
without plug connectors. The various sizes • Extremely high tightness IP66/67 -40.00 – 230.00 °F
fit on metric cut-outs from M12 to M50 and • Fits on standard cut-outs ofM12 to M50
are specially designed for cable diameters • High temperature stability EPDM
0.16 – 1.38 inch (4 – 35 mm). IP 66 for plate thickness of 1.0–4.0 mm
IP 67 for plate thickness of 1.0–4.0 mm

Type Order No. Color for Ø EH TL D Pack

inch inch inch inch qty.

KDM/G M12 87401020 Gray 0.16 – 0.28 0.28 0.51 0.48 50

KDM/G M16 87401022 Gray 0.20 – 0.39 0.28 0.71 0.64 50
KDM/G M20 87401024 Gray 0.31 – 0.51 0.28 0.79 0.80 50
KDM/G M25 87401026 Gray 0.43 – 0.67 0.28 0.85 1.00 50
KDM/G M32 87401028 Gray 0.59 – 0.83 0.28 0.98 1.28 50
KDM/G M40 87401030 Gray 0.75 – 1.06 0.31 1.18 1.59 25
KDM/G M50 87401032 Gray 1.10 – 1.38 0.37 1.38 1.99 10

946
Cable entry systems for railway technology

947
KDL CABLE ENTRY SYSTEM FOR RAILWAY TECHNOLOGY

RAS room integrity set

PRODUCT INFORMATION SPECIFICATIONS

The RAS Room integrity set is used in con- Special benefits of the RAS room integrity
junction with the KDL/C or KDL/D and KDL/H system are: Frame: Polyamide 6
cable entry plates. Because the system can
be split apart the RAS room integrity system • Approved for railway technology
can be completely retrofitted on the inside of (EN 45545-2)
the housing. The fire protection mat reacts • Room integrity (firewall)
at temperatures exceeding 160°C (320 °F) • Completely splittable system
by expanding and thereby closing off the • Quick and easy assembly
opening completely fire resistant.

Type Order No. Color Suitable for Pack

qty.

RAS 24/12 87141111 Black KDL/D 24/12 1

RAS 24/9 87141123 Black KDL/D 24/9 1
RAS 24/8 87141119 Black KDL/D 24/8 1
RAS 24/4 87141115 Black KDL/D 24/4 1
RAS 16/8 87141127 Black KDL/D 16/8 1
RAS 16/7 87141131 Black KDL/D 16/7 1
RAS 16/3 87141135 Black KDL/D 16/3 1
RAS 10/6 87141137 Black KDL/D 10/6 1
RAS 10/5 87141143 Black KDL/D 10/5 1
RAS 10/2 87141140 Black KDL/D 10/2 1

Dimension table

Type Order No. Installation height A B

inch inch inch

RAS 24/12 87141111 0.59 5.83 2.28

RAS 24/9 87141123 0.59 5.83 2.28
RAS 24/8 87141119 0.59 5.83 2.28
RAS 24/4 87141115 0.59 5.83 2.28
RAS 16/8 87141127 0.59 4.76 2.28
RAS 16/7 87141131 0.59 4.76 2.28
RAS 16/3 87141135 0.59 4.76 2.28
RAS 10/6 87141137 0.59 3.98 2.28
RAS 10/5 87141143 0.59 3.98 2.28
RAS 10/2 87141140 0.59 3.98 2.28

948
KDL CABLE ENTRY SYSTEM FOR RAILWAY TECHNOLOGY

KDL/D-EN cable entry system

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The KDL/D-EN cable entry systems is • Approved for railway technology
designed for inserting pre-assembled cables. (EN 45545-2) -22 – 212 °F
The KDL/D-EN system is a splittable system • Cable infeed without interruption Frame: Polyamide
that enables the quick and simple installation • Standardized cut-out dimensions Block: TPE
of up to 12 pre-assembled cables with a • Easy assembly
V0
high packing density in control cabinets and • High protection class to IP 65
terminal boxes. • Very robust construction IP 65 (with suitable grommets and
Special benefits of the KDL/D-EN are: • Integrated strain relief cables)

Type Order No. Color No. Pack

Openings qty.
small / large
For standard cut-out size 24
KDL/D-EN 24/12 87141110 Black 12 / 0 1
KDL/D-EN 24/9 87141122 Black 8/1 1
KDL/D-EN 24/8 87141118 Black 6/2 1
KDL/D-EN 24/4 87141114 Black 0/4 1

For standard cut-out size 16

KDL/D-EN 16/8 87141126 Black 8/0 1
KDL/D-EN 16/7 87141130 Black 6/1 1
KDL/D-EN 16/3 87141134 Black 0/3 1

For standard cut-out size 10

KDL/D-EN 10/6 87141138 Black 6/0 1
KDL/D-EN 10/5 87141142 Black 4/1 1
KDL/D-EN 10/2 87141139 Black 0/2 1

For standard cut-out size 6

KDL/D-EN 6/4 87141144 Black 4/0 1

Special size
KDL/D-EN 1/6 87141148 Black 6/0 1

949
KDL CABLE ENTRY SYSTEM FOR RAILWAY TECHNOLOGY

KDL/D-EN cable entry system (Continued...)

c c

d Øe
b
d
a

Dimension table

Type Order No. Installation height A B a b e

inch inch inch inch inch inch

For standard cut-out size 24

KDL/D-EN 24/12 87141110 0.71 5.83 2.28 4.41 1.42 0.22
KDL/D-EN 24/9 87141122 0.71 5.83 2.28 4.41 1.42 0.22
KDL/D-EN 24/8 87141118 0.71 5.83 2.28 4.41 1.42 0.22
KDL/D-EN 24/4 87141114 0.71 5.83 2.28 4.41 1.42 0.22

For standard cut-out size 16

KDL/D-EN 16/8 87141126 0.71 4.76 2.28 3.39 1.42 0.22
KDL/D-EN 16/7 87141130 0.71 4.76 2.28 3.39 1.42 0.22
KDL/D-EN 16/3 87141134 0.71 4.76 2.28 3.39 1.42 0.22

For standard cut-out size 10

KDL/D-EN 10/6 87141138 0.71 3.98 2.28 2.56 1.42 0.22
KDL/D-EN 10/5 87141142 0.71 3.98 2.28 2.56 1.42 0.22
KDL/D-EN 10/2 87141139 0.71 3.98 2.28 2.56 1.42 0.22

For standard cut-out size 6

KDL/D-EN 6/4 87141144 0.71 2.91 2.28 2.56 1.42 0.22

Special size
KDL/D-EN 1/6 87141148 0.71 5.83 1.50 4.41 0.67 0.22

950
KDL CABLE ENTRY SYSTEM FOR RAILWAY TECHNOLOGY

KDL/H-EN cable entry system

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

KDL/H is manufactured in a zinc die-cast • Cable infeed without interruption
process and is designed for feed-through of • Approved for railway technology -22 – 212 °F
pre-assembled cables. The KDL/D system (EN 45545-2 / 3x HL3) Frame: ZN
is a splittable system that enables the quick • Standardized cut-out dimensions Block: TPE
and easy installation of up to 48 pre-assem- • Easy assembly Frame: Aluminum
bled cables with a high packing density in • High protection category to IP 69K (in IP 66/67 (with suitable grommets and
control cabinets and terminal boxes. combination with the proper enclosure) cables)
Special benefits of the KDL/H are: • Very robust construction
• Integrated strain relief
• Matching grommets: KDT/X-EN

Type Order No. Color No. Pack

Openings qty.
small / large
For standard cut-out size 24
KDL/H-EN 24/12 87141510 Black 12 1

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

For standard cut-out size 24

KDL/H-EN 24/12 87141510 0.71 5.83 2.28 4.41 1.42 2.56 0.63 0.22

951
KDL CABLE ENTRY SYSTEM FOR RAILWAY TECHNOLOGY

KDT/X-EN cable entry grommets

PRODUCT INFORMATION SPECIFICATIONS

For example, in conjunction with the KDL/D- • Approved for railway technology
EN and KDL/H-EN cable entry systems, the (EN 45545-2) -22 – 212 °F
KDT/X-EN cable entry grommets can be used
to easily route pre-assembled cables into TPE
and through control cabinets. The grommet
V0
is 1-piece and is subsequently positioned
around the cable.

Type Order No. Color for Ø For opening No. of openings Pack
inch small / large qty.

Grommet, small
KDT/X-EN 02 87141310 Black 0.08 – 0.12 •/- 1 12
KDT/X-EN 03 87141312 Black 0.12 – 0.16 •/- 1 12
KDT/X-EN 04 87141314 Black 0.16 – 0.20 •/- 1 12
KDT/X-EN 05 87141316 Black 0.20 – 0.24 •/- 1 12
KDT/X-EN 06 87141318 Black 0.24 – 0.28 •/- 1 12
KDT/X-EN 07 87141320 Black 0.28 – 0.31 •/- 1 12
KDT/X-EN 08 87141322 Black 0.31 – 0.35 •/- 1 12
KDT/X-EN 09 87141324 Black 0.35 – 0.39 •/- 1 12
KDT/X-EN 10 87141326 Black 0.39 – 0.43 •/- 1 12
KDT/X-EN 11 87141328 Black 0.43 – 0.47 •/- 1 12
BTK/X-EN (dummy grommet) 87141370 Black •/- 12

Grommet, large
KDT/X-EN 12 87141330 Black 0.47 – 0.51 -/• 1 4
KDT/X-EN 13 87141332 Black 0.51 – 0.55 -/• 1 4
KDT/X-EN 14 87141334 Black 0.55 – 0.59 -/• 1 4
KDT/X-EN 15 87141336 Black 0.59 – 0.63 -/• 1 4
KDT/X-EN 16 87141338 Black 0.63 – 0.67 -/• 1 4
KDT/X-EN 17 87141340 Black 0.67 – 0.71 -/• 1 4
KDT/X-EN 18 87141342 Black 0.71 – 0.75 -/• 1 4
KDT/X-EN 19 87141344 Black 0.75 – 0.79 -/• 1 4
KDT/X-EN 20 87141346 Black 0.79 – 0.83 -/• 1 4
KDT/X-EN 21 87141348 Black 0.83 – 0.87 -/• 1 4
BTG/X-EN (dummy grommet) 87141366 Black -/• 4

952
KDP CABLE ENTRY PLATE FOR RAILWAY TECHNOLOGY

KDP/EN cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The KDP/EN 24 cable gland plates are made • Enormous time savings in assembly
of modified Polyamide 6 and are cable • High packing density -22 – 158 °F
entry and retaining systems for cables and • Standardized cut-out dimensions Enclosure: Polyamide 6
pneumatic hoses, used in control cabinets or • Option of labeling Seal: EPDM
plant construction specifically in the railway • Protection category IP 65
V0
industry. Wherever quick assembly, cable- • Approved for railway technology
protecting and high packing density are (EN 45545-2) IP 65
required, the cable insertion system is used.
The special benefits of the KDP/EN 24 are:

Type Order No. Color No. Openings Pack

Openings Quantity / Ø inch qty.

KDP/EN 24/11 87301210 Black 11 4x 0.12 – 0.26 1

4x 0.2 – 0.36
3x 0.55 – 0.79
KDP/EN 24/12 87301220 Black 12 12x 0.31 – 0.47 1
KDP/EN 24/13 87301230 Black 13 2x 0.12 – 0.22 1
6x 0.16 – 0.32
4x 0.35 – 0.55
1x 0.55 – 0.79
KDP/EN 24/14 87301240 Black 14 6x 0.12 – 0.26 1
4x 0.2 – 9.2
4x 0.38 – 0.63
KDP/EN 24/17 87301250 Black 17 17x 0.2 – 0.36 1
KDP/EN 24/17-1 87301251 Black 17 11x 0.12 – 0.26 1
1x 0.16 – 0.32
5x 0.31 – 0.49
KDP/EN 24/22 87301260 Black 22 16x 0.12 – 0.26 1
4x 0.2 – 0.36
2x 0.31 – 0.49
KDP/EN 24/23 87301270 Black 23 23x 0.16 – 0.32 1
KDP/EN 24/29 87301280 Black 29 29x 0.12 – 0.26 1
KDP/EN 24/80 87301290 Black 80 78x 0.06 – 0.1 1
2x 0.1 – 0.2

953
KDP CABLE ENTRY PLATE FOR RAILWAY TECHNOLOGY

KDP/EN cable entry plate, plastic (Continued...)

c c

d Øe
b
d
a

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP/EN 24/11 87301210 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/12 87301220 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/13 87301230 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/14 87301240 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/17 87301250 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/17-1 87301251 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/22 87301260 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/23 87301270 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/29 87301280 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN 24/80 87301290 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22

954
KDP CABLE ENTRY PLATE FOR RAILWAY TECHNOLOGY

KDP/EN-RA plastic cable entry plate, plastic

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The KDP/EN-RA 24 cable gland plates are Special benefits of the KDP/EN-RA 24 are:
made of modified Polyamide 6 and are cable -22 – 158 °F
entry and retaining systems for cables and • Enormous time savings in assembly Enclosure: Polyamide 6
pneumatic hoses, used in control cabinets or • High packing density Seal: EPDM
plant construction specifically in the railway • Standardized cut-out dimensions
V0
industry. The fire protection mat, enclosed in • Option of labeling
the supply, reacts at temperatures exceeding • Protection category IP 65 IP 65
160°C (320 °F) by expanding and thereby • Room integrity (firewall)
closing off the opening completely fire resist- • Approved for railway technology
ant. Wherever quick assembly, cable-protect- (EN 45545-2)
ing and high packing density are required,
the cable insertion system is used.

Type Order No. Color No. Openings Pack

Openings Quantity / Ø inch qty.

KDP/EN-RA 24/11 87301215 Black 11 4x 0.12 – 0.26 1

4x 0.2 – 0.36
3x 0.55 – 0.79
KDP/EN-RA 24/12 87301225 Black 12 12x 0.31 – 0.47 1
KDP/EN-RA 24/13 87301235 Black 13 2x 0.12 – 0.22 1
6x 0.16 – 0.32
4x 0.35 – 0.55
1x 0.55 – 0.79
KDP/EN-RA 24/14 87301245 Black 14 6x 0.12 – 0.26 1
4x 0.2 – 0.36
4x 0.38 – 0.63
KDP/EN-RA 24/17 87301255 Black 17 17x 0.2 – 0.36 1
KDP/EN-RA 24/17-1 87301256 Black 17 11x 0.12 – 0.26 1
1x 0.16 – 0.32
5x 0.31 – 0.49
KDP/EN-RA 24/22 87301265 Black 22 16x 0.12 – 0.26 1
4x 0.2 – 9.2
2x 0.31 – 0.49
KDP/EN-RA 24/23 87301275 Black 23 23x 0.16 – 0.32 1
KDP/EN-RA 24/29 87301285 Black 29 29x 0.12 – 0.26 1
KDP/EN-RA 24/80 87301295 Black 80 78x 0.06 – 0.1 1
2x 0.1 – 0.2

955
KDP CABLE ENTRY PLATE FOR RAILWAY TECHNOLOGY

KDP/EN-RA plastic cable entry plate, plastic (Continued...)

c c

d Øe
b
d
a

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

KDP/EN-RA 24/11 87301215 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/12 87301225 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/13 87301235 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/14 87301245 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/17 87301255 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/17-1 87301256 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/22 87301265 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/23 87301275 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/29 87301285 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22
KDP/EN-RA 24/80 87301295 0.59 2.32 5.79 4.41 1.42 2.56 0.63 0.22

956
KDP CABLE ENTRY PLATE FOR RAILWAY TECHNOLOGY

KDP/EN cable entry plate, metal

c c

Øe
d

A
b

a
B

PRODUCT INFORMATION
The KDP/EN Metal cable gland plates are The special benefits of the KDP/EN Metal are: - Other variants are available on request -
cable entry and retaining systems for ca-
bles and pneumatic hoses used in control • Enormous time savings in assembly
cabinets or plant construction specifically • High packing density
in the railway industry. Wherever quick as- • Protection category IP 65
sembly, cable-protecting and high packing • Approved for railway technology
density are required, the cable insertion (EN 45545-2)
system is used.

Type Order No. Color No. Openings Pack

Openings Quantity / Ø inch qty.

cablequick ® KDP/EN 60/30, Alu 87664201 RAL 7035 30 13x 0.04 – 0.14 1
12x 0.12 – 0.2
2x 0.16 – 0.31
1x 0.24 – 0.39
2x 0.31 – 0.47
cablequick KDP/EN 120/59, Alu
®
87664202 RAL 7035 59 22x 0.04 – 0.14 1
15x 0.14 – 0.26
14x 0.24 – 0.39
2x 0.31 – 0.47
6x 0.63 – 0.94

Dimension table

Type Order No. A B a b c d e

inch inch inch inch inch inch inch

cablequick ® KDP/EN 60/30, Alu 87664201 5.83 2.36 4.33 1.81 2.56 0.63 0.22
cablequick KDP/EN 120/59, Alu
®
87664202 11.34 4.72 9.45 3.15 5.39 1.42 0.22

957
958
EMC solutions

959
EMC SHIELD CLIPS SYSTEM

SC-EMV / MSC-EMV shield clip

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Murrplastik products are characterized by
plant and control cabinet installations are their very easy handling. Zinc-plated spring steel
becoming more and more complex.
A good EMC concept therefore gains • The spring action provides uninterrupted
increasing importance. contact pressure with the shield.
Murrplastik earthing and cable shielding • High conductivity
products are designed to meet the demands • Excellent discharge of high-frequency
for low bleeder resistance at high frequen- noise current.
cies.

Type Order No. For shield of Ø Pack

inch qty.

SC-EMV 1.5 - 3 87601002 0.06 – 0.12 25

SC-EMV 3 - 6 87601004 0.12 – 0.24 25
SC-EMV 6 - 8 87601006 0.24 – 0.31 25
SC-EMV 8 - 11 87601008 0.31 – 0.43 25
SC-EMV 11 - 16 87601010 0.43 – 0.63 25
SC-EMV 17 - 22 87601012 0.67 – 0.87 25
SC-EMV 23 - 29 87601014 0.91 – 1.14 25
MSC-EMV 3 - 12 87601020 0.12 – 0.47 25
MSC-EMV 7 - 18 87601022 0.28 – 0.71 25

960
EMC SHIELD CLIPS SYSTEM

SCF-EMV / MSCF-EMV shield clip with snap-on foot

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Murrplastik products are characterized by
plant and control cabinet installations are their very easy handling. Zinc-plated spring steel
becoming more and more complex.
A good EMC concept therefore gains • Easy, no tools required, installation on
increasing importance. 1.38 inch (35 mm) top-hat rails
Murrplastik earthing and cable shielding • The spring action provides uninterrupted
products are designed to meet the demands contact pressure with the shield.
for low bleeder resistance at high frequen- • Excellent discharge of high-frequency
cies. noise current.

Type Order No. For shield of Ø Pack

inch qty.

SCF-EMV 1.5 - 3 87601052 0.06 – 0.12 10

SCF-EMV 3-6 87601054 0.12 – 0.24 10
SCF-EMV 6-8 87601056 0.24 – 0.31 10
SCF-EMV 8-11 87601058 0.31 – 0.43 10
SCF-EMV 11-16 87601060 0.43 – 0.63 10
SCF-EMV 17-22 87601062 0.67 – 0.87 10
SCF-EMV 23-29 87601064 0.91 – 1.14 10
SCF-EMV 30-37 87601066 1.18 – 1.46 10
MSCF-EMV 3 - 12 87601070 0.12 – 0.47 10
MSCF-EMV 7 - 18 87601072 0.28 – 0.71 10

961
EMC SHIELD CLIPS SYSTEM

SCFZ-EMV shield clip with snap-on foot and strain relief

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, • Easy, no tools required, installation on
plant and control cabinet installations are 1.38 inch (35 mm) top-hat rails Zinc-plated spring steel
becoming more and more complex. • The spring action provides uninterrupted
A good EMC concept therefore gains contact pressure with the shield.
increasing importance. • Excellent discharge of high-frequency
Murrplastik earthing and cable shielding noise current.
products are designed to meet the demands • Optional strain relief with cable ties.
for low bleeder resistance at high frequen-
cies.
Murrplastik products are characterized by
their very easy handling.

Type Order No. For shield of Ø Pack

inch qty.

SCFZ-EMV 1.5 - 3 87601074 0.06 – 0.12 10

SCFZ-EMV 3 - 6 87601075 0.12 – 0.24 10
SCFZ-EMV 6 - 8 87601076 0.24 – 0.31 10
SCFZ-EMV 8 - 11 87601077 0.31 – 0.43 10
SCFZ-EMV 11 - 16 87601078 0.43 – 0.63 10
SCFZ-EMV 17 - 22 87601079 0.67 – 0.87 10

962
EMC SHIELD CLIPS SYSTEM

DCS-EMV / DCSZ-EMV douple clip for busbar

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, • Assembly without tools on 0.39x0.12 inch
plant and control cabinet installations are (10x3 mm) bar Zinc-plated spring steel
becoming more and more complex. A good • Less warehoused parts
EMC concept therefore gains increasing • Very compact design
importance. Murrplastik earthing and cable • Strain relief with cable ties (DCSZ-EMV)
shielding products are designed to meet
the demands for low bleeder resistance at
high frequencies. Murrplastik products are
characterized by their very easy handling.

Type Order No. For shield of Ø Pack

inch qty.

DCS-EMV 1.5 - 3 87601034 0.06 – 0.12 10

DCS-EMV 3 - 6 87601036 0.12 – 0.24 10
DCS-EMV 6 - 8 87601038 0.24 – 0.31 10
DCSZ-EMV 1.5 - 3 87601035 0.06 – 0.12 10
DCSZ-EMV 3 - 6 87601037 0.12 – 0.24 10
DCSZ-EMV 6 - 8 87601039 0.24 – 0.31 10

963
EMC SHIELD CLIPS SYSTEM

MCS-EMV/MCSZ-EMV multi-clip for busbar

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Murrplastik products are characterized by
plant and control cabinet installations are their very easy handling. Zinc-plated spring steel
becoming more and more complex.
A good EMC concept therefore gains • Assembly without tools on 0.39x0.12 inch
increasing importance. (10x3 mm) bar
Murrplastik earthing and cable shielding • Less warehoused parts
products are designed to meet the demands • Very compact design
for low bleeder resistance at high frequen- • Strain relief with cable ties (MCSZ-EMV)
cies.

Type Order No. For shield of Ø Pack

inch qty.

MCS-EMV 3 - 12 87601044 0.12 – 0.47 10

MCS-EMV 7 - 18 87601046 0.28 – 0.71 10
MCSZ-EMV 3 - 12 87601045 0.12 – 0.47 10
MCSZ-EMV 7 - 18 87601047 0.28 – 0.71 10

964
EMC SHIELD CLIPS SYSTEM

MFZ-EMV mounting foot with strain relief

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Murrplastik products are characterized by
plant and control cabinet installations are their very easy handling. Zinc-plated spring steel
becoming more and more complex.
A good EMC concept therefore gains • Assembly without tools on 1.38 inch
increasing importance. (35 mm) top-hat rail
Murrplastik earthing and cable shielding • SC-EMV / MSC-EMV shield clips universal
products are designed to meet the demands support bracket
for low bleeder resistance at high frequen- • Small model range because of the vari-
cies. able population options

Type Order No. Pack

qty.

MFZ-EMV 87601030 10

965
EMC SHIELD CLIPS SYSTEM

SF-EMV / SFZ-EMV mounting foot for busbar

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, • Assembly without tools on 0.39x0.12 inch
plant and control cabinet installations are (10x3 mm) top-hat rail Zinc-plated spring steel
becoming more and more complex. • For SC-EMV / MSC-EMV shield clips
A good EMC concept therefore gains • Smaller model range because of the vari-
increasing importance. able population options
Murrplastik earthing and cable shielding • Less warehoused parts
products are designed to meet the demands • Very compact design
for low bleeder resistance at high frequen- • Strain relief with cable ties (SFZ-EMV)
cies.
Murrplastik products are characterized by
their very easy handling.

Type Order No. Pack

qty.

SF-EMV 10x3 87601042 10

SFZ-EMV 10x3 87601040 10

966
EMC SHIELD CLIPS SYSTEM

DF-EMV / DFZ-EMV/EMC direct-mount foot

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, • Direct mounting with M4, M5 or M6 bolt
plant and control cabinet installations are • SC-EMV / MSC-EMV shield clips universal Zinc-plated spring steel
becoming more and more complex. support bracket
A good EMC concept therefore gains • Smaller model range because of the vari-
increasing importance. able population options
Murrplastik earthing and cable shielding • Very compact design
products are designed to meet the demands • Strain relief with cable ties (DFZ-EMV)
for low bleeder resistance at high frequen-
cies.
Murrplastik products are characterized by
their very easy handling.

Type Order No. Pack

qty.

DF-EMV 4 87601082 10
DF-EMV 5 87601086 10
DFZ-EMV 4 87601080 10
DFZ-EMV 5 87601084 10
DFZ-EMV 6 87601087 10

967
EMC SHIELD CLIPS SYSTEM

RFZ-EMV foot string mounting with strain relief

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, • Contacting up to 12 cable shields with
plant and control cabinet installations are stringable foot Zinc-plated spring steel
becoming more and more complex. • Space saving assembly on the mounting
A good EMC concept therefore gains plate with M4 or M5 bolts
increasing importance. • Universal support for shield clip with
Murrplastik earthing and cable shielding various clamping ranges
products are designed to meet the demands • Flexible and adaptable by breaking off at
for low bleeder resistance at high frequen- the perforated breaking points
cies. • Less warehoused parts
Murrplastik products are characterized by • Very compact design
their very easy handling. • Strain relief through cable ties

Type Order No. Pack

qty.

RFZ-EMV 12x4 87601090 5

RFZ-EMV 12x5 87601092 5

968
EMC SHIELD CLIPS SYSTEM

EMC solutions assortment kit

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Content:
plant and control cabinet installations are Zinc-plated spring steel
becoming more and more complex. A good 15x SC-EMV 1.5 – 3
EMC concept therefore gains increasing 15x SC-EMV 3 – 6
importance. Murrplastik earthing and cable 15x SC-EMV 6 – 8
shielding products are designed to meet the 15x SC-EMV 8 – 11
demands for low bleeder resistance at high 5x MSC-EMV 3 – 12
frequencies. 5x MSC-EMV 7 – 18
Murrplastik products are characterized by 3x DCSZ-EMV 3 – 6
their very easy handling. 3x DCSZ-EMV 6 – 8
10x MFZ-EMV
10x DFZ-EMV 4
10x SFZ-EMV 10x3

Type Order No. Pack

qty.

EMC solutions assortment kit 87980099 1

969
EMC CABLE ENTRY SYSTEM

KDL xx/xx-EMC cable entry system

c c

d Øe
B b
d

A a

PRODUCT INFORMATION SPECIFICATIONS

The cable entry system KDL/EMV is based The KDL 16 /xx-EMV types fit on cut-outs
on the cable entry system KDL. A conductive for 16-pin plug connectors, the KDL 24 / -40.00 – 176 °F
surface allows cable sheath interference xx-EMV types fit on cut-outs for 24-pin plug Conductive coating on Polyamide 6.6
to be discharged onto the control cabinet connectors by Harting or Wieland. Polyamide 6.6
simply and without additional aids.
V0
Field-related interferences are discharged by
the metalization.

Type Order No. Color No. Pack

Openings qty.
small / large
For standard cut-out size 16
KDL 16/2-EMV1) 87171020 Chrome 0/2 1
KDL 16/4-EMV 1)
87171022 Chrome 4/0 1

For standard cut-out size 24

KDL 24/3-EMV2) 87171024 Chrome 1/2 1
KDL 24/5-EMV2) 87171026 Chrome 5/0 1

Enlarged cut-out for up to 15 pre-assembled cables

KDL 2/10-EMV3) 87171027 Chrome 10 / 0 1
KDL 3/15-EMV 87980021 Chrome 15 / 0 1

1)
Replacement seal KDL16-EMV 8717102100
2)
Replacement seal KDL 24-EMV 8717102500
3)
Replacement seal KDL 2/10-EMV 87980020

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

For standard cut-out size 16

KDL 16/2-EMV1) 87171020 0.39 4.57 2.28 3.39 1.42 2.03 0.63 0.22
KDL 16/4-EMV 1)
87171022 0.39 4.57 2.28 3.39 1.42 2.03 0.63 0.22

For standard cut-out size 24

KDL 24/3-EMV2) 87171024 0.39 5.75 2.28 4.41 1.42 2.56 0.63 0.22
970
EMC CABLE ENTRY SYSTEM

KDL xx/xx-EMC cable entry system (Continued...)

Type Order No. Installation height A B a b c d e
inch inch inch inch inch inch inch inch

KDL 24/5-EMV2) 87171026 0.39 5.75 2.28 4.41 1.42 2.56 0.63 0.22

Enlarged cut-out for up to 15 pre-assembled cables

KDL 2/10-EMV3) 87171027 0.39 5.75 3.54 4.72 2.36 2.56 1.26 0.22
KDL 3/15-EMV 87980021 0.39 5.75 4.80 4.72 3.78 2.56 1.89 0.22

971
EMC CABLE ENTRY SYSTEM

KDT/Z-EMV cable entry grommets

PRODUCT INFORMATION SPECIFICATIONS

The cable entry grommet KDT/Z-EMV is a
grommet adapted to the sheath diameter -40.00 – 176 °F
with a conductive textile tape to discharge Thermoplastic rubber
interferences to the control cabinet. With conductive textile tape
Strain relief can be provided quickly and
HB
easily for cables using cable ties.

Type Order No. Color For shield of Ø For opening No. Pack
inch small / large Openings qty.

Grommet, small
KDT/Z-EMV 03 87171812 Black 0.12 – 0.16 •/- 1 10
KDT/Z-EMV 04 87171814 Black 0.16 – 0.2 •/- 1 10
KDT/Z-EMV 05 87171816 Black 0.2 – 0.24 •/- 1 10
KDT/Z-EMV 06 87171818 Black 0.24 – 0.28 •/- 1 10
KDT/Z-EMV 07 87171820 Black 0.28 – 0.31 •/- 1 10
KDT/Z-EMV 08 87171822 Black 0.31 – 0.35 •/- 1 10
KDT/Z-EMV 09 87171824 Black 0.35 – 0.39 •/- 1 10
KDT/Z-EMV 10 87171826 Black 0.39 – 0.43 •/- 1 10
KDT/Z-EMV 11 87171828 Black 0.43 – 0.47 •/- 1 10
KDT/Z-EMV 12 87171830 Black 0.47 – 0.51 •/- 1 10
KDT/Z-EMV 13 87171832 Black 0.51 – 0.55 •/- 1 10
KDT/Z-EMV 14 87171834 Black 0.55 – 0.59 •/- 1 10
KDT/Z-EMV 15 87171836 Black 0.59 – 0.63 •/- 1 10

Grommet, large
KDT/Z-EMV 16 87172012 Black 0.63 – 0.67 -/• 1 10
KDT/Z-EMV 17 87172014 Black 0.67 – 0.71 -/• 1 10
KDT/Z-EMV 18 87172016 Black 0.71 – 0.75 -/• 1 10
KDT/Z-EMV 19 87172018 Black 0.75 – 0.79 -/• 1 10
KDT/Z-EMV 20 87172020 Black 0.79 – 0.83 -/• 1 10
KDT/Z-EMV 21 87172022 Black 0.83 – 0.87 -/• 1 10
KDT/Z-EMV 22 87172024 Black 0.87 – 0.91 -/• 1 10
KDT/Z-EMV 23 87172026 Black 0.91 – 0.94 -/• 1 10
KDT/Z-EMV 24 87172028 Black 0.94 – 0.98 -/• 1 10
KDT/Z-EMV 25 87172030 Black 0.98 – 1.02 -/• 1 10
KDT/Z-EMV 26 87172032 Black 1.02 – 1.06 -/• 1 10
972
EMC CABLE ENTRY SYSTEM

KDT/Z-EMV cable entry grommets (Continued...)

Type Order No. Color For shield of Ø For opening No. Pack
inch small / large Openings qty.

KDT/Z-EMV 27 87172034 Black 1.06 – 1.1 -/• 1 10

KDT/Z-EMV 28 87172036 Black 1.1 – 1.14 -/• 1 10

Grommet adapter (adapter for small grommet)

ATG-EMV (adapter grommet) 87172040 Black -/• 1 10

Dummy grommet
BTK 17 (dummy grommet) 87171210 Black •/- 0 10

973
EMC CABLE ENTRY PLATE

Type KDP/N EMV module cable entry plate

PRODUCT INFORMATION
The Murrplastik KDP/N 24 EMV module is makes direct contact with the enclosure wall KDP/N 24 EMV module Features:
designed to dissipate line and field induced on the inside of the enclosure, the KDP/xx
interference. The KDP/N 24-EMV modules 24 cable entry plate provides mechanical • 360° shield contact
are used in conjunction with cable entry protection against dust and liquids from the • Large contact area with short distance
plates of Type KDP/xx 24. In order to ensure environment. • Easy assembly
optimum performance, the EMV module is • Compact and slim form factor
assembled in combination with the KDP/N • Visible contact area
24 cable entry plate. While the EMV module • Stainless steel construction

Type Order No. Suitable for Pack

qty.

KDP/N 24/11 EMV module 87664010 KDP/xx 24/11 1

KDP/N 24/12 EMV module 87664020 KDP/xx 24/12 1
KDP/N 24/13 EMV module 87664030 KDP/xx 24/13 1
KDP/N 24/14 EMV module 87664040 KDP/xx 24/14 1
KDP/N 24/17 EMV module 87664050 KDP/xx 24/17 1
KDP/N 24/17-1 EMV module 87664051 KDP/xx 24/17-1 1
KDP/N 24/22 EMV module 87664060 KDP/xx 24/22 1
KDP/N 24/23 EMV module 87664070 KDP/xx 24/23 1
KDP/N 24/29 EMV module 87664080 KDP/xx 24/29 1

974
EMC CABLE FIXING PLATE

KAF/K cable fixing plate

PRODUCT INFORMATION SPECIFICATIONS

The KAF/K-EMV cable fixing plate consists • Approved for railway technology -40.00 – 257 °F
of a plastic carrier with a fitted V2A stain- (EN 45545-2) Short periods 284 °F
less steel discharge plate. Integrated clamps Plate: Polyamide 6.6
ensure quick and safe fastening, both on the Discharge plate: V2A
top hat or C-rail. The ground contact occurs
V0
through the lateral brackets. The use of two
connecting points ensures a good discharge,
regardless of the position of the cable.

Type Order No. Quantity of Installation height A B c d Pack

cables inch inch inch inch inch qty.

KAF/K-75-EMV 87201414 5 1.05 4.29 0.91 3.80 0.18 1

KAF/K-140-EMV 87201418 9 1.05 6.81 0.91 6.18 0.18 1

975
EMC CABLE FIXING PLATE

KAF/EK cable fixing plate

PRODUCT INFORMATION SPECIFICATIONS

The cable fixing plate KAF/K-EMV consists stand for the 35 mm hat rail (EN50022). The
of a V2A plate for the direct discharge of any KAF/EK is characterized by its extremely fast Plate: V2A
interference on the cable sheaths. Stripping and easy assembly.
the cable in the area of the cable fixing plate • Fits on a 35 mm top-hat rail (EN50022)
and fastening by means of cable ties ensures
contact to the cable fixing plate. The ground
contact is provided through a special screw

Type Order No. Quantity of Installation height A B c Pack

cables inch inch inch inch qty.

KAF/EK-EMV 140 87201228 6 1.14 6.10 1.63 5.75 1

KAF/EK-EMV 165 87201230 10 1.14 7.05 1.63 6.65 1

976
EMC CABLE FIXING PLATE

KAF/SF cable fixing plate

PRODUCT INFORMATION SPECIFICATIONS

The cable fixing plate KAF/SF is suitable for produces a low-resistance ground contact.
discharging interferences which may occur The use of two connecting points ensures a Plate: V2A
on cable sheaths. The earth/ground contact good discharge regardless of the position of
is provided through a special snap-on foot for the cable on the KAF/SF.
the 35 mm top-hat rail (EN50022). Stripping
the cable in the area of the KAF/SF and • Fits on a 35 mm top-hat rail (EN50022)
clamping in the KAF/SF achieves a contact to • Simply snap on
the KAF/SF. The snap-on clip of the KAF/SF

Type Order No. Quantity of Installation height A B c Pack

cables inch inch inch inch qty.

KAF/SF-50 EMV 87201240 2 0.79 1.97 1.93 1.48 1

KAF/SF-83 EMV 87201242 4 0.79 3.27 1.93 2.80 1
KAF/SF-116 EMV 87201244 6 0.79 4.57 1.93 4.06 1
KAF/SF-180 EMV 87201248 10 0.79 7.28 1.93 6.73 1

977
EMC CABLE FIXING PLATE

KAF/DC cable fixing plate

PRODUCT INFORMATION SPECIFICATIONS

The cable fixing plate KAF/DC is suitable for fastening by means of cable ties ensures Plate: V2A
discharging interferences which may occur contact to the cable fixing plate. A low-resist- Stand: Brass
on cable sheaths. The ground connection ance ground contact is achieved by mounting
occurs via the fixing screws. The version DC the KAF on the mounting plate.
is only suitable for direct installation on a The use of two connecting points ensures a
conductive background. Stripping the cable good discharge regardless of the position of
in the area of the cable fixing plate and the cable on the KAF.

Type Order No. Quantity of Installation height A B c Pack

cables inch inch inch inch qty.

KAF/DC-50 EMV 87201250 2 1.04 1.97 1.93 1.48 1

KAF/DC-83 EMV 87201252 4 1.04 3.27 1.93 2.76 1
KAF/DC-116 EMV 87201254 6 1.04 4.57 1.93 4.06 1
KAF/DC-180 EMV 87201258 10 1.04 7.09 1.93 6.69 1

978
EMC STRAIN RELIEF

ZL xx-AB strain relief

PRODUCT INFORMATION SPECIFICATIONS

In conjunction with the ZL strain relief rail,
the ZL-AB discharge plate is suitable for di- Stainless steel 1.4301
scharging interferences which may occur on
cable sheaths.
ZL strain relief not included in delivery.
Please order separately.

Type Order No. Installation height A B c e Pack

inch inch inch inch inch qty.

ZL 39-AB/EMV1) 87701034 0.47 1.61 0.98 0.77 0.26 1

ZL 60-AB/EMV 1)
87701036 0.47 2.46 0.98 1.71 0.26 1
ZL 87-AB/EMV1) 87701040 0.47 3.50 0.98 2.68 0.26 1
ZL 140-AB/EMV 1)
87701046 0.47 5.61 0.98 4.76 0.26 1

1)
The corresponding ZL strain relief plate is required for the discharge plate.

979
EMC DISCHARGE PLATE

KDL-AB discharge plate

PRODUCT INFORMATION SPECIFICATIONS

The discharge plate AB-Clip 24 - EMV is The special advantages of the AB-Clip 24 -
made of 1.4301 (V2A) stainless steel. It can EMV discharge plate are: Stainless steel 1.4310
be used in conjunction with 24-pin cable
entry strips (KDL/x) and cable gland plates • High stability
(KDP/x) to eliminate interference that can • Easy installation of the screen clip system
occur on the cable shields. The discharge • Compact design
plate should be installed on the inside of the • RoHS compliant
control cabinet, directly to the fixing points of
the cable entry system. The deflector plate
accommodates the EMC clip systems, which
can be mounted on a 0.39x0.12 inch (10x3
mm) busbar.
Type Order No. No. Suitable for Pack
Discharges qty.

KDL-AB 24/6-EMV 87252438 6 KDL/C 24/12 1

KDL/D 24/12
KDL-AB 16/2-EMV 87252410 2 KDL 16/2 1
KDL/E 16/2
KDL-AB 16/4-EMV 87252412 4 KDL 16/4 1
KDL-AB 24/3-EMV 87252414 3 KDL 24/3 1
KDL-AB 24/5-EMV 87252416 5 KDL 24/5 1
KDL 2/10
KDL 3/15

980
EMC DISCHARGE PLATE

KDL/N-AB discharge plate

PRODUCT INFORMATION SPECIFICATIONS

The KDL/E discharge plates are suited for
discharging interference which may occur on Stainless steel 1.4310
cable sheaths.
The discharge plate is installed on the inside
of the control cabinet, directly to the fixing
points of the KDL/E cable entry system.

Type Order No. No. Suitable for Pack

Discharges qty.

KDL/N-AB 16/5-EMV OT 87252420 3 KDL/E 16/5 upper part 1

KDL/N-AB 16/5-EMV UT 87252422 2 KDL/E 16/5 lower part 1
KDL/N-AB 16/8-EMV 87252424 4 KDL/E 16/8 upper and lower part 1
KDL/N-AB 24/4-EMV OT 87252426 3 KDL/E 24/4 upper part 1
KDL/N-AB 24/4-EMV UT 87252428 1 KDL/E 24/4 lower part 1
KDL/N-AB 24/7-EMV OT 87252430 4 KDL/E 24/7 upper part 1
KDL/N-AB 24/7-EMV UT 87252432 3 KDL/E 24/7 lower part 1
KDL/N-AB 24/10-EMV OT 87252434 5 KDL/E 24/10 upper part 1
KDL/N-AB 24/10-EMV UT 87252436 5 KDL/E 24/10 lower part 1

981
EMC DISCHARGE PLATE

AB-Clip 24-EMV discharge plate

PRODUCT INFORMATION SPECIFICATIONS

The discharge plate AB-Clip 24 - EMV is The special advantages of the AB-Clip 24 -
made of 1.4301 (V2A) stainless steel. It can EMV discharge plate are: Stainless steel 1.4310
be used in conjunction with 24-pin cable
entry strips (KDL/x) and cable gland plates • High stability
(KDP/x) to eliminate interference that can • Easy installation of the screen clip system
occur on the cable shields. The discharge • Compact design
plate should be installed on the inside of the • RoHS compliant
control cabinet, directly to the fixing points of
the cable entry system. The deflector plate
accommodates the EMC clip systems, which
can be mounted on a 0.39x0.12 inch (10x3
mm) busbar.
Type Order No. Pack
qty.

AB-Clip 24-EMV 87841060 2

982
EMC SHIELD CLIPS SYSTEM ACCESSORIES

SAS busbar

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Murrplastik products are characterized by
plant and control cabinet installations are their very easy handling. Copper
becoming more and more complex.
A good EMC concept therefore gains
increasing importance.
Murrplastik earthing and cable shielding
products are designed to meet the demands
for low bleeder resistance at high frequen-
cies.

Type Order No. Pack

qty.

SAS 10x3 87841010 5

983
EMC SHIELD CLIPS SYSTEM ACCESSORIES

SMF busbar mounting foot

SMF/A 68 SMF/B 50 SMF/D 49

SMF/A 49 SMF/B 20 SMF/C 40

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Murrplastik products are characterized by
plant and control cabinet installations are their very easy handling. Galvanized sheet steel
becoming more and more complex.
A good EMC concept therefore gains
increasing importance.
Murrplastik earthing and cable shielding
products are designed to meet the demands
for low bleeder resistance at high frequen-
cies.

Type Order No. Pack

qty.

SMF/A 49 87841020 10
SMF/A 68 87841022 10
SMF/B 20 87841030 10
SMF/B 50 87841032 10
SMF/C 40 87841040 10
SMF/D 49 87841042 10

984
EMC SHIELD CLIPS SYSTEM ACCESSORIES

FBE ribbon earthing cable

PRODUCT INFORMATION SPECIFICATIONS

The steering components in today’s machine, Murrplastik products are characterized by
plant and control cabinet installations are their very easy handling. Copper
becoming more and more complex.
A good EMC concept therefore gains • Excellent discharge of high-frequency
increasing importance. noise current.
Murrplastik earthing and cable shielding • Very small transient resistance
products are designed to meet the demands
for low bleeder resistance at high frequen-
cies.

Type Order No. Pack

qty.

FBE M6-200/10 87841080 10

FBE M8-250/16 87841084 10
FBE M8-300/16 87841082 10

985
SHIELDING CLAMP

SK shielding clamp

PRODUCT INFORMATION SPECIFICATIONS

The shielding clamp may be used where the
shield of individual cables must be connected Galvanized sheet steel
with the ground potential. The SK can be
either screwed down on the mounting plate
or snapped on to the 1.38 inch (35 mm)
top-hat rail (EN 50022) by means of a
mounting foot. SK mounting foot not included
in delivery. Please order separately.

Type Order No. Fastening For shield of Ø A B C Pack

inch inch inch inch qty.

SK 3 – 8 87201060 M4x0,7 0.12 – 0.31 0.71 0.53 1.02 10

SK 4 – 13.5 87201062 M4x0,7 0.16 – 0.53 0.79 0.79 1.28 10
SK 10 – 20 87201064 M4x0,7 0.39 – 0.79 1.02 0.98 1.57 10
SK 15 – 32 87201066 M4x0,7 0.59 – 1.26 1.28 1.32 2.52 10
SK mounting foot 87201070 0.51 1.97 10

986
SHIELDING CLAMP

SKS shielding clamp

PRODUCT INFORMATION SPECIFICATIONS

The shielding clamp may be used where the
shield of individual cables must be con- Galvanized sheet steel
nected with the ground potential. The SKS
are mounted on a 0.39x0.12 inch (10x3 mm)
busbar. The broad clamping range makes
high contact output to the cable shield pos-
sible.

Type Order No. For shield of Ø Pack

inch qty.

SKS-EMV 2 - 5 87602010 0.08 – 0.2 10

SKS-EMV 3 - 8 87602012 0.12 – 0.31 10
SKS-EMV 3 - 14 87602014 0.12 – 0.55 10
SKS-EMV 3 - 20 87602016 0.12 – 0.79 10
SKS-EMV 5 - 28 87602018 0.2 – 1.1 10

987
988
Strain relief / cable fixing plate

989
STRAIN RELIEF

ZL-fix strain relief

PRODUCT INFORMATION SPECIFICATIONS

The strain relief ZL-fix may be used wherever • Do not constrict sensitive cables such as
cables, hoses, cords, wires or conduits must fiber optic cables or pneumatic hoses -22 – 176 °F
be relieved or routed in a way that is secure, • No-tools fastening Velcro® system can be Tape: Coated polyamide
easy and cost-effective. The strain relief opened and closed infinitely Base: Polyamide 6.6
ZL-fix is available in two versions, either for • Very simple handling
direct screw fastening (flat-head screw M5, • Variable installation positions
not included in delivery) or for fastening on a
profile with 0.39 inch (10 mm) groove width
(integrated nut strap).
Type Order No. Color Length of Velcro strip Section groove Pack
inch Min. – max. inch qty.

Profile assembly
ZL-fix P-15 87705018 Black 3.62 0.39 – 0.43 10
ZL-fix P-25 87705020 Black 6.73 0.39 – 0.43 10
ZL-fix P8-25 87705030 Black 6.69 0.31 – 0.35 10
ZL-fix P-35 87705022 Black 6.73 0.39 – 0.43 10

Screw assembly
ZL-fix W-15 87705008 Black 3.62 10
ZL-fix W-25 87705010 Black 6.73 10
ZL-fix W-25-400 87705015 Black 15.75 10
ZL-fix W-35 87705012 Black 6.73 10

Dimension table

Type Order No. A B EH M Ø

inch inch inch inch inch

Profile assembly
ZL-fix P-15 87705018 1.18 1.34 0.42 0.59 0.20
ZL-fix P-25 87705020 1.46 1.34 0.42 0.98 0.20
ZL-fix P8-25 87705030 0.98 1.34 0.42 0.20
ZL-fix P-35 87705022 1.77 1.34 0.42 1.38 0.20

Screw assembly
ZL-fix W-15 87705008 1.54 1.34 0.42 0.59 0.20
ZL-fix W-25 87705010 1.46 1.34 0.42 0.98 0.20
ZL-fix W-25-400 87705015 1.46 1.34 0.42 0.98 0.20
ZL-fix W-35 87705012 1.77 1.34 0.42 1.38 0.20

990
STRAIN RELIEF

ZL strain relief

PRODUCT INFORMATION SPECIFICATIONS

The ZL strain relief plate may be used • Approved for railway technology
wherever the strain of cables, hoses, cords, (EN 45545-2) -40.00 – 257 °F
wires or conduits must be relieved or they
are to be routed in a secure, easy and Plate: Polyamide 6.6
cost-effective way. The insertion of the ELB
V0
bushing stops the cold extrusion character-
istic of plastic from affecting the secure fixing
of the plate. The DH spacer sleeve is needed
for two-tier mounting.

Type Order No. Color No. Pack

Cables qty.

ZL 04 87701010 Black 12 1
ZL 05 87701012 Black 15 1
ZL 39 87701014 Black 3 1
ZL 60 87701016 Black 4 1
ZL 70 87701017 Black 5 1
ZL 80 87701015 Black 6 1
ZL 87/68 87701018 Black 6 1
ZL 87/50 87701019 Black 6 1
ZL 103 87701020 Black 7 1
ZL 121 87701022 Black 8 1
ZL 140 87701024 Black 9 1
ZL 180/6 87701026 Black 12 1
ZL 180/8 87701027 Black 12 1

Dimension table

Type Order No. A a B EH G1 H O Ø

inch inch inch inch inch inch inch inch

ZL 04 87701010 3.74 2.93 1.38 0.36 0.33 0.12 0.22

ZL 05 87701012 4.69 4.25 1.38 0.36 0.33 0.12 0.22
ZL 39 87701014 1.52 0.77 1.57 0.39 0.47 0.55 0.12 0.35
ZL 60 87701016 2.34 1.71 1.57 0.39 0.47 0.55 0.12 0.35
ZL 70 87701017 2.74 1.71 1.57 0.39 0.47 0.55 0.12 0.35
ZL 80 87701015 3.13 2.68 1.57 0.39 0.47 0.55 0.12 0.35
ZL 87/68 87701018 3.41 2.68 1.57 0.39 0.47 0.55 0.12 0.35
ZL 87/50 87701019 3.41 1.97 1.57 0.39 0.47 0.55 0.12 0.35
ZL 103 87701020 4.04 3.31 1.57 0.39 0.47 0.55 0.12 0.35
991
STRAIN RELIEF

ZL strain relief (Continued...)

Type Order No. A a B EH G1 H O Ø

inch inch inch inch inch inch inch inch

ZL 121 87701022 4.76 4.04 1.57 0.39 0.47 0.55 0.12 0.35
ZL 140 87701024 5.49 4.76 1.57 0.39 0.47 0.55 0.12 0.35
ZL 180/6 87701026 7.09 6.18 1.65 0.45 0.47 0.63 0.12 0.35
ZL 180/8 87701027 7.09 6.18 1.65 0.45 0.53 0.63 0.12 0.43

992
STRAIN RELIEF

Type ZL-AH strain relief

EH

G1 Ø H

PRODUCT INFORMATION SPECIFICATIONS

The ZL-AH strain relief plates are based on
the ZL strain relief plate. By inserting the -40.00 – 257 °F
aluminum grommets, the ZL strain relief Plate: Polyamide 6.6
plate is free of fastening forces. Insert bushing: Aluminum
V0
• Approved for railway technology
(EN 45545-2)

Type Order No. Color No. Pack

Cables qty.

With aluminum grommets, assembly with M5 screws

ZL-AH 39 87701230 Black 3 1
ZL-AH 60 87701232 Black 4 1
ZL-AH 87 87701234 Black 6 1
ZL-AH 103 87701236 Black 7 1
ZL-AH 121 87701238 Black 8 1
ZL-AH 140 87701240 Black 9 1
ZL-AH 180 87701242 Black 12 1

Dimension table

Type Order No. A a B EH G1 H O Ø

inch inch inch inch inch inch inch inch

With aluminum grommets, assembly with M5 screws

ZL-AH 39 87701230 1.52 0.77 1.57 0.39 0.47 0.55 0.28 0.22
ZL-AH 60 87701232 2.34 1.71 1.57 0.39 0.47 0.55 0.28 0.22
ZL-AH 87 87701234 3.41 2.68 1.57 0.39 0.47 0.55 0.28 0.22
ZL-AH 103 87701236 4.04 3.31 1.57 0.39 0.47 0.55 0.28 0.22
ZL-AH 121 87701238 4.76 4.04 1.57 0.39 0.47 0.55 0.28 0.22
ZL-AH 140 87701240 5.49 4.76 1.57 0.39 0.47 0.55 0.28 0.22
ZL-AH 180 87701242 7.09 6.18 1.65 0.45 0.47 0.63 0.28 0.22

993
STRAIN RELIEF

Type ZL-MH strain relief

EH

G1 Ø H

PRODUCT INFORMATION SPECIFICATIONS

The ZL-MH strain relief plates are based on
the ZL strain relief plate. By inserting the -40.00 – 257 °F
brass grommets, the ZL strain relief plate is Plate: Polyamide 6.6
free of fastening forces. Insert bushing: Brass
V0
Approved for railway technology (EN 45545-
2)

Type Order No. Color No. Pack

Cables qty.

With brass grommets, assembly with M5 screws

ZL-MH 39 87701210 Black 3 1
ZL-MH 39, VE 50 87701211 Black 3 50
ZL-MH 60 87701212 Black 4 1
ZL-MH 87 87701214 Black 6 1
ZL-MH 103 87701216 Black 7 1
ZL-MH 121 87701218 Black 8 1
ZL-MH 140 87701220 Black 9 1
ZL-MH 140, VE 50 87701221 Black 9 50
ZL-MH 180 87701222 Black 12 1

with brass grommets, assembly with M6 screws

ZL-MH 39/6 87701270 Black 3 1
ZL-MH 60/6 87701272 Black 4 1
ZL-MH 60, VE 50 87701213 Black 4 50
ZL-MH 70/6 87701274 Black 5 1
ZL-MH 87/6 87701278 Black 6 1
ZL-MH 87, VE 50 87701215 Black 6 50
ZL-MH 103/6 87701282 Black 7 1
ZL-MH 121/6 87701284 Black 8 1
ZL-MH 140/6 87701286 Black 9 1
ZL-MH 180/6 87701288 Black 12 1

994
STRAIN RELIEF

Type ZL-MH strain relief (Continued...)

Dimension table

Type Order No. A a B EH G1 H O Ø

inch inch inch inch inch inch inch inch

With brass grommets, assembly with M5 screws

ZL-MH 39 87701210 1.52 0.77 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 39, VE 50 87701211 1.52 0.77 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 60 87701212 2.34 1.71 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 87 87701214 3.41 2.68 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 103 87701216 4.04 3.31 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 121 87701218 4.76 4.04 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 140 87701220 5.49 4.76 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 140, VE 50 87701221 5.49 4.76 1.57 0.39 0.47 0.55 0.15 0.22
ZL-MH 180 87701222 7.09 6.18 1.65 0.45 0.47 0.55 0.15 0.22

with brass grommets, assembly with M6 screws

ZL-MH 39/6 87701270 1.52 0.77 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 60/6 87701272 2.34 1.71 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 60, VE 50 87701213 2.34 1.71 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 70/6 87701274 2.74 1.71 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 87/6 87701278 3.41 2.68 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 87, VE 50 87701215 3.41 2.68 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 103/6 87701282 4.04 3.31 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 121/6 87701284 4.76 4.04 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 140/6 87701286 5.49 4.76 1.57 0.39 0.47 0.55 0.15 0.26
ZL-MH 180/6 87701288 7.09 6.18 1.65 0.45 0.47 0.63 0.15 0.26

995
STRAIN RELIEF

ZL-AM strain relief

EH

G1 Ø H I

PRODUCT INFORMATION SPECIFICATIONS

The ZL-AM strain relief plates are based • Very fast installation
on the ZL strain relief plate. The embedded • Orderly routing of the cable -40.00 – 257 °F
brass discs hinder the cold flow deformation • Simple and effective strain relief through
properties of the plastic under heavy and cable ties Polyamide 6.6
permanent vibration, thereby preventing the • Micro-encapsulated PreCOTE thread
V0
screwed connection from loosening by itself. coating serves as an added locking
Tenon nuts and bolts enable simple assembly element
on C-rails. • Approved for railway technology
(EN 45545-2)
Type Order No. Color No. Pack
Cables qty.

For 0.63 inch (16 mm) C-rail slot

Interior width 0.87–1.06 inch (22–27 mm)
Brass disc
Stainless steel screw 1.4301 with UNC thread
Stainless steel slot nut 1.4301
ZL-AM 39 87702210 Black 3 1
ZL-AM 60 87702212 Black 4 1
ZL-AM 87 87702214 Black 6 1
ZL-AM 103 87702216 Black 7 1
ZL-AM 121 87702218 Black 8 1
ZL-AM 140 87702220 Black 9 1
ZL-AM 180 87702222 Black 12 1

Dimension table

Type Order No. A a B EH G1 H I Ø

inch inch inch inch inch inch inch inch

For 0.63 inch (16 mm) C-rail slot

Interior width 0.87–1.06 inch (22–27 mm)
Brass disc
Stainless steel screw 1.4301 with UNC thread
Stainless steel slot nut 1.4301
ZL-AM 39 87702210 1.52 0.77 1.57 0.47 0.47 0.63 1.02 0.20
ZL-AM 60 87702212 2.34 1.71 1.57 0.47 0.47 0.63 1.02 0.20
ZL-AM 87 87702214 3.41 2.68 1.57 0.47 0.47 0.63 1.02 0.20
ZL-AM 103 87702216 4.04 3.31 1.57 0.47 0.47 0.63 1.02 0.20
ZL-AM 121 87702218 4.76 4.04 1.57 0.47 0.47 0.63 1.02 0.20
ZL-AM 140 87702220 5.49 4.76 1.57 0.47 0.47 0.63 1.02 0.20
ZL-AM 180 87702222 7.09 6.18 1.65 0.53 0.47 0.63 1.02 0.20
996
STRAIN RELIEF

ZL-SW strain relief

EH

G1 Ø H I

PRODUCT INFORMATION SPECIFICATIONS

The ZL-SW strain relief plates are based • Very fast installation
on the ZL strain relief plate. The embedded • Orderly routing of the cable -40.00 – 257 °F
brass discs hinder the cold flow deformation • Simple and effective strain relief through
properties of the plastic under heavy and cable ties Polyamide 6.6
permanent vibration, thereby preventing the • Micro-encapsulated PreCOTE thread
V0
screwed connection from loosening by itself. coating serves as an added locking
Tenon nuts and bolts enable simple assembly element
on C-rails. • Approved for railway technology
(EN 45545-2)
Type Order No. Color No. Pack
Cables qty.

For 0.47 inch (12 mm) C-rail slot

Interior width 1.06 inch (27 mm)
Brass disc
1.4301 stainless steel screw with metric thread
Stainless steel slot nut 1.4301
ZL-SW 39 87702410 Black 3 1
ZL-SW 60 87702412 Black 4 1
ZL-SW 87 87702414 Black 6 1
ZL-SW 103 87702416 Black 7 1
ZL-SW 121 87702418 Black 8 1
ZL-SW 140 87702420 Black 9 1
ZL-SW 180/6 87702422 Black 12 1

Dimension table

Type Order No. A a B EH G1 H I Ø

inch inch inch inch inch inch inch inch

For 0.47 inch (12 mm) C-rail slot

Interior width 1.06 inch (27 mm)
Brass disc
1.4301 stainless steel screw with metric thread
Stainless steel slot nut 1.4301
ZL-SW 39 87702410 1.52 0.77 1.57 0.47 0.47 0.46 0.71 0.24
ZL-SW 60 87702412 2.34 1.71 1.57 0.47 0.47 0.46 0.71 0.24
ZL-SW 87 87702414 3.41 2.68 1.57 0.47 0.47 0.46 0.71 0.24
ZL-SW 103 87702416 4.04 3.31 1.57 0.47 0.47 0.46 0.71 0.24
ZL-SW 121 87702418 4.76 4.04 1.57 0.47 0.47 0.46 0.71 0.24
ZL-SW 140 87702420 5.49 4.76 1.57 0.47 0.47 0.46 0.71 0.24
ZL-SW 180/6 87702422 7.09 6.18 1.65 0.53 0.47 0.46 0.71 0.24
997
STRAIN RELIEF

ZL-C strain relief

EH

G1 Ø H I

PRODUCT INFORMATION SPECIFICATIONS

The ZL-C strain relief plates are based on • Very fast installation
the ZL strain relief plate. The embedded • Orderly routing of the cable -40.00 – 257 °F
brass discs hinder the cold flow deformation • Simple and effective strain relief through
properties of the plastic under heavy and cable ties Polyamide 6.6
permanent vibration, thereby preventing the • Approved for railway technology
V0
screwed connection from loosening by itself. (EN 45545-2)
Tenon nuts and bolts enable simple assembly
on C-rails.

Type Order No. Color No. Pack

Cables qty.

For 11 mm C-rail
Slot / interior width 21 mm
Brass disc
Steel screw with metric thread
Steel slot nut
ZL-C 39 87702810 Black 3 1
ZL-C 60 87702812 Black 4 1
ZL-C 80 87702814 Black 6 1
ZL-C 87 87702816 Black 6 1
ZL-C 103 87702818 Black 7 1
ZL-C 121 87702820 Black 8 1
ZL-C 140 87702822 Black 9 1
ZL-C 180/6 87702824 Black 12 1

Dimension table

Type Order No. A a B EH G1 H I Ø

inch inch inch inch inch inch inch inch

For 11 mm C-rail
Slot / interior width 21 mm
Brass disc
Steel screw with metric thread
Steel slot nut
ZL-C 39 87702810 1.52 0.77 1.57 0.47 0.47 0.42 0.71 0.35
ZL-C 60 87702812 2.34 1.71 1.57 0.47 0.47 0.42 0.71 0.35
ZL-C 80 87702814 3.13 2.68 1.57 0.47 0.47 0.42 0.71 0.35
ZL-C 87 87702816 3.41 2.68 1.57 0.47 0.47 0.42 0.71 0.35
ZL-C 103 87702818 4.04 3.31 1.57 0.47 0.47 0.42 0.71 0.35
ZL-C 121 87702820 4.76 4.04 1.57 0.47 0.47 0.42 0.71 0.35
998
STRAIN RELIEF

ZL-C strain relief (Continued...)

Type Order No. A a B EH G1 H I Ø
inch inch inch inch inch inch inch inch

ZL-C 140 87702822 5.49 4.76 1.57 0.47 0.47 0.42 0.71 0.35
ZL-C 180/6 87702824 7.09 6.18 1.65 0.53 0.47 0.42 0.71 0.35

999
STRAIN RELIEF

ZL-MF strain relief

PRODUCT INFORMATION SPECIFICATIONS

The strain relief plate ZL-MF is based on • Quick and easy to assemble and dis-
the strain relief plate ZL. The pre-installed assemble without the need for tools. -40.00 – 257 °F
mounting feet enable simple, tool-free as- • Orderly routing of the cable
sembly on a 1.38 inch (35 mm) top-hat rail • Simple and effective strain relief through Polyamide 6.6
(EN 50022). The feet are made of galvanized cable ties
V0
steel plate. • Approved for railway technology
(EN 45545-2)

Type Order No. Color No. Pack

Cables qty.

ZL-MF 39 87702610 Black 3 1

ZL-MF 70 87702614 Black 5 1
ZL-MF 140 87702622 Black 9 1

Dimension table

Type Order No. A a B EH

inch inch inch inch

ZL-MF 39 87702610 1.52 0.77 1.57 0.39

ZL-MF 70 87702614 2.74 1.71 1.57 0.39
ZL-MF 140 87702622 5.49 4.76 1.57 0.39

1000
STRAIN RELIEF

ZLF strain relief

EH

PRODUCT INFORMATION SPECIFICATIONS

The strain relief plate ZLF is based on the • Very fast installation
strain relief plate ZL. The fastening clips that • Orderly routing of the cable -40.00 – 257 °F
are used allow for simply mounting on C-rails • Simple and effective strain relief through
with 0.39 inch (10 mm) slot and a plate cable ties Polyamide 6.6
thickness of 0.08 inch (2.0 mm) maximum. • Approved for railway technology
V0
The pre-mounted screw in the fastening clip (EN 45545-2)
allows the snap-on stand to be splayed and
locked.

Type Order No. Color No. Pack

Cables qty.

ZLF 39 87701410 Black 3 10

ZLF 60 87701412 Black 4 10
ZLF 87 87701414 Black 6 10
ZLF 103 87701416 Black 7 10
ZLF 121 87701418 Black 8 10
ZLF 140 87701420 Black 9 10

Dimension table

Type Order No. A a B EH

inch inch inch inch

ZLF 39 87701410 1.52 0.77 1.57 0.67

ZLF 60 87701412 2.34 1.71 1.57 0.67
ZLF 87 87701414 3.41 2.68 1.57 0.67
ZLF 103 87701416 4.04 3.31 1.57 0.67
ZLF 121 87701418 4.76 4.04 1.57 0.67
ZLF 140 87701420 5.49 4.76 1.57 0.67

1001
STRAIN RELIEF

KDZL strain relief

PRODUCT INFORMATION SPECIFICATIONS

The KDZL 24 strain relief modules is manu- Special benefits of the KDZL are:
factured from thermoplastic rubber. When -22 – 212 °F
combined with KDP/F, the KDZL 24 is a • Enormous time savings in assembly
strain relief for cables and pneumatic hoses • High packing density TPE
such as those used in control cabinets, • Standard cut-out dimensions
HB
plant or machine construction. Strain relief • Large wire diameter ranges
is achieved e.g. by installing cable ties. • Easy assembly
Wherever quick assembly, cable-protection • High degree of strain relief
and high packing density are required,
including good strain relief, the strain relief
module is the solution.

Type Order No. Color Suitable for Pack

qty.

KDZL 24-14, sw 87302210 Black KDP/F 24/14 5

KDZL 24-22, sw 87302220 Black KDP/F 24/22 5
KDZL 24-28, sw 87302240 Black KDP/F 24/28 5
KDZL 24-46, sw 87302250 Black KDP/F 24/46 5

1002
STRAIN RELIEF

KS-fix strain relief

PRODUCT INFORMATION SPECIFICATIONS

The Velcro base serves as installation aid • Velcro strips at variable lengths
for carefully fixing wires, cables and hoses. • Gentle wire fixing without constrictions Polyamide 6.6
The base can be equipped at various lengths • Reusable
without tools by just using our Velcro strips. • Cable bundles can easily be expanded V0
The Velcro base is designed for direct • Easy handling
mounting, using countersunk screws. • Reduced risk of injury compared to
trimmed cable ties

Type Order No. Color Suitable for Pack

qty.

KS-fix 4-201) 87705050 Black KB-fix 10 10

KS-fix 8-35 1)
87705060 Black KB-fix 20 10
KS-fix 10-60 1)
87705070 Black KB-fix 20 10
KS-fix 20-1002) 87705080 Black KB-fix 30 10

1)
Mounted with M5 screws
2)
Mounted with M6 screws

Dimension table

Type Order No. A B

inch inch

KS-fix 4-201) 87705050 0.75 0.59

KS-fix 8-351) 87705060 1.14 1.02
KS-fix 10-60 1)
87705070 1.42 1.02
KS-fix 20-1002) 87705080 2.44 1.50

1003
CABLE FIXING PLATE

KAF cable fixing plate

EH

PRODUCT INFORMATION SPECIFICATIONS

The cable fixing plate KAF is suitable for • Approved for railway technology
simultaneously holding and relieving the (EN 45545-2) -40.00 – 257 °F
strain of cables in the control cabinet.
Designed to be mounted on a standard Polyamide 6.6
1.38 inch (35 mm) top-hat rail (EN 50022;
V0
Niedax 2934;2936) or on a C-rail (Niedax
2970;2971). Installation is a simple snap-in
process.

Type Order No. Color No. Pack

Cables qty.

KAF 11 87201010 Black 1 1

KAF 75 87201014 Black 5 1
KAF 140 87201018 Black 9 1

Dimension table

Type Order No. A B a EH K L M

inch inch inch inch inch inch inch

KAF 11 87201010 0.45 1.57 0.43 0.53 0.47 0.37

KAF 75 87201014 2.95 1.57 2.48 0.43 0.53 0.47 0.37
KAF 140 87201018 5.49 1.57 5.03 0.43 0.53 0.47 0.37

1004
CABLE FIXING PLATE

KAF/NI cable fixing plate

K
L

EH

PRODUCT INFORMATION SPECIFICATIONS

The cable fixing plate KAF is suitable for si- • Approved for railway technology
multaneously holding and relieving the strain (EN 45545-2) -40.00 – 257 °F
of cables in the control cabinet. Mounted
using Niedax model 2910 C-rail. Installation Polyamide 6.6
is a simple snap-in process. Additional
V0
securing through pre-mounted lock screw.

Type Order No. Color No. Pack

Cables qty.

KAF/NI 100 87201006 Black 6 1

Dimension table

Type Order No. A B a EH K L

inch inch inch inch inch inch

KAF/NI 100 87201006 3.94 0.94 2.64 0.87 0.47 0.22

1005
CABLE FIXING PLATE

KBL cable tie rail

PRODUCT INFORMATION SPECIFICATIONS

Quick and easy fitting of cables.
Cable ties may be pushed on if a rail is -40.00 – 176 °F
already fitted.
Polyamide PA 6

V0

Type Order No. Color No. Pack

Cables qty.

KBL 245 x 15 87702122 Black 6 100

KBL 245 x 15 87702120 Black 6 1

Dimension table

Type Order No. A B a a2 EH X Y Ø

inch inch inch inch inch inch inch inch

KBL 245 x 15 87702122 9.65 0.61 9.09 1.52 0.20 0.94 0.34 0.16
KBL 245 x 15 87702120 9.65 0.61 9.09 1.52 0.20 0.94 0.34 0.16

1006
Cable fittings m-seal®

1007
FITTINGS

Cable fitting m-seal® KV (plastic version)

EH GL

LW
SW2 SW1

PRODUCT INFORMATION SPECIFICATIONS

The m-seal cable fittings are manufactured m-seal cable fittings feature the following -4 – 212 °F
of specially modified Polyamide and the seal advantages: Short periods 302 °F
is made of NBR. • Large seal and clamping area
• With integrated strain relief
• High protection class IP 68
i.a.w. UL94 V2 self-extinguishing
• Simple, fast assembly without special
tools. IP 68

Strain relief according to DIN EN 50262

Type Order No. Color Connecting Clamping range (LW) EH GL SW 1 / 2 Pack

thread inch inch inch inch qty.

Metric plastic thread

m-seal KV M12x1.5 3.0-6.51) 84181250 Black M12x1,5 0.12 – 0.26 0.87 0.24 0.59 100
m-seal KV M12x1.5 4.0-8.0 1)
84181252 Black M16x1,5 0.16 – 0.31 0.98 0.31 0.75 50
m-seal KV M20x1.5 6.0-12.02) 84181254 Black M20x1,5 0.24 – 0.47 1.14 0.39 0.94 50
m-seal KV M25x1.5 11.0-17.0 2)
84181256 Black M25x1,5 0.43 – 0.67 1.30 0.31 1.14 50
m-seal KV M32x1.5 15.0-21.0 2)
84181258 Black M32x1,5 0.59 – 0.83 1.54 0.39 1.42 25
m-seal KV M40x1.5 19.0-28.02) 84181260 Black M40x1,5 0.75 – 1.1 1.73 0.39 1.81 20
m-seal KV M50x1.5 30.0-38.0 2)
84181262 Black M50x1,5 1.18 – 1.5 1.93 0.71 2.36 10
m-seal KV M63x1.5 34.0-44.02) 84181264 Black M63x1,5 1.34 – 1.73 1.93 0.71 2.56 10

m-seal KV M12x1.5 3.0-6.51) 84181200 Gray M12x1,5 0.12 – 0.26 0.87 0.24 0.59 100
m-seal KV M12x1.5 4.0-8.01) 84181202 Gray M16x1,5 0.16 – 0.31 0.98 0.31 0.75 50
m-seal KV M20x1.5 6.0-12.0 2)
84181204 Gray M20x1,5 0.24 – 0.47 1.14 0.39 0.94 50
m-seal KV M25x1.5 11.0-17.0 2)
84181206 Gray M25x1,5 0.43 – 0.67 1.30 0.31 1.14 50
m-seal KV M32x1.5 15.0-21.02) 84181208 Gray M32x1,5 0.59 – 0.83 1.54 0.39 1.42 25
m-seal KV M40x1.5 19.0-28.0 2)
84181210 Gray M40x1,5 0.75 – 1.1 1.73 0.39 1.81 20
m-seal KV M50x1.5 30.0-38.02) 84181212 Gray M50x1,5 1.18 – 1.5 1.93 0.71 2.36 10
m-seal KV M63x1.5 34.0-44.0 2)
84181214 Gray M63x1,5 1.34 – 1.73 1.93 0.71 2.56 10

Pg plastic threading
m-seal KV Pg 7 3.0-6.51) 84181050 Black Pg 07 0.12 – 0.26 0.87 0.31 0.59 100
m-seal KV Pg 9 4.0-8.01) 84181052 Black Pg 09 0.16 – 0.31 0.98 0.31 0.75 50
1008
FITTINGS

Cable fitting m-seal® KV (plastic version) (Continued...)

Type Order No. Color Connecting Clamping range (LW) EH GL SW 1 / 2 Pack
thread inch inch inch inch qty.

m-seal KV Pg 11 5.0-10.03) 84181054 Black Pg 11 0.2 – 0.39 1.10 0.31 0.87 50

m-seal KV Pg 13.5 6.0-12.0 2)
84181056 Black Pg 13.5 0.24 – 0.47 1.14 0.35 0.94 50
m-seal KV Pg 16 10.0-14.0 4)
84181058 Black Pg 16 0.39 – 0.55 1.22 0.39 1.06 50
m-seal KV Pg 21 13.0-18.02) 84181060 Black Pg 21 0.51 – 0.71 1.38 0.43 1.3 25
m-seal KV Pg 29 18.0-25.0 4)
84181062 Black Pg 29 0.71 – 0.98 1.57 0.43 1.65 20
m-seal KV Pg 36 22.0-32.0 2)
84181064 Black Pg 36 0.87 – 1.26 1.93 0.51 2.09 10
m-seal KV Pg 42 30.0-38.02) 84181066 Black Pg 42 1.18 – 1.5 1.93 0.51 2.36 10
m-seal KV Pg 48 34.0-44.0 2)
84181068 Black Pg 48 1.34 – 1.73 1.93 0.55 2.56 10

m-seal KV Pg 7 3.0-6.51) 84181000 Gray Pg 07 0.12 – 0.26 0.87 0.31 0.59 100
m-seal KV Pg 9 4.0-8.0 1)
84181002 Gray Pg 09 0.16 – 0.31 0.98 0.31 0.75 50
m-seal KV Pg 11 5.0-10.03) 84181004 Gray Pg 11 0.2 – 0.39 1.10 0.31 0.87 50
m-seal KV Pg 13.5 6.0-12.0 2)
84181006 Gray Pg 13.5 0.24 – 0.47 1.14 0.35 0.94 50
m-seal KV Pg 16 10.0-14.04) 84181008 Gray Pg 16 0.39 – 0.55 1.22 0.39 1.06 50
m-seal KV Pg 21 13.0-18.0 2)
84181010 Gray Pg 21 0.51 – 0.71 1.38 0.43 1.3 25
m-seal KV Pg 29 18.0-25.0 4)
84181012 Gray Pg 29 0.71 – 0.98 1.57 0.43 1.65 20
m-seal KV Pg 36 22.0-32.02) 84181014 Gray Pg 36 0.87 – 1.26 1.93 0.51 2.09 10
m-seal KV Pg 42 30.0-38.0 2)
84181016 Gray Pg 42 1.18 – 1.5 1.93 0.51 2.36 10
m-seal KV Pg 48 34.0-44.0 2)
84181018 Gray Pg 48 1.34 – 1.73 1.93 0.55 2.56 10

1)
With UR approval
2)
With UL approval
3)
With cURus- approval
4)
With cULus- approval

1009
FITTINGS

Cable fitting m-seal® MV (metal version)

EH GL

LW
SW2 SW1

PRODUCT INFORMATION SPECIFICATIONS

The m-seal cable fittings are made of m-seal cable fittings feature the following -4 – 212 °F
nickel-plated brass and the sealing ring of advantages: Short periods 302 °F
neoprene. The fittings offer excellent strain • Large seal and clamping area
relief and have a cap nut that is resistant to • With integrated strain relief
vibration. • High protection class IP 68
i.a.w. UL94 V2 self-extinguishing
• Simple, fast assembly without special
tools. IP 68

Strain relief according to DIN EN 50262

Type Order No. Connecting Clamping range (LW) EH GL SW 1 / 2 Pack

thread inch inch inch inch qty.

Metric metal thread

m-seal MV M12x1.5 3.0-6.51) 84201600 M12x1,5 0.12 – 0.26 0.85 0.24 0.55 50
m-seal MV M16x1.5 5.0-10.0 2)
84201602 M16x1,5 0.2 – 0.39 1 0.28 0.79 50
m-seal MV M20x1.5 6.0-12.01) 84201604 M20x1,5 0.24 – 0.47 1 0.31 0.87 50
m-seal MV M25x1.5 11.0-17.0 3)
84201606 M25x1,5 0.43 – 0.67 1.22 0.31 1.06 25
m-seal MV M32x1.5 15.0-21.03) 84201608 M32x1,5 0.59 – 0.83 1.32 0.31 1.34 10
m-seal MV M40x1.5 19.0-28.0 3)
84201610 M40x1,5 0.75 – 1.1 1.65 0.35 1.69 10
m-seal MV M50x1.5 27.0-38.0 3)
84201612 M50x1,5 1.06 – 1.5 1.97 0.35 2.28 5
m-seal MV M63x1.5 34.0-44.01) 84201614 M63x1,5 1.34 – 1.73 2.06 0.55 2.52 / 2.68 5

Pg metal thread
m-seal MV Pg 7 3.0-6.51) 84201000 Pg 07 0.12 – 0.26 0.86 0.24 0.55 50
m-seal MV Pg 9 4.0-8.0 1)
84201002 Pg 09 0.16 – 0.31 0.89 0.24 0.67 50
m-seal MV Pg 11 5.0-11.01) 84201004 Pg 11 0.2 – 0.43 1 0.24 0.79 50
m-seal MV Pg 13.5 6.0-12.0 1)
84201006 Pg 13.5 0.24 – 0.47 0.95 0.26 0.87 50
m-seal MV Pg 16 10.0-14.0 1)
84201008 Pg 16 0.39 – 0.55 1.08 0.26 0.94 25
m-seal MV Pg 21 13.0-18.01) 84201010 Pg 21 0.51 – 0.71 1.23 0.28 1.18 20
m-seal MV Pg 29 18.0-25.0 1)
84201012 Pg 29 0.71 – 0.98 1.55 0.31 1.57 10
m-seal MV Pg 36 22.0-32.01) 84201014 Pg 36 0.87 – 1.26 1.86 0.35 1.97 5
m-seal MV Pg 42 30.0-38.0 1)
84201016 Pg 42 1.18 – 1.5 1.88 0.47 2.28 5
m-seal MV Pg 48 34.0-44.0 1)
84201018 Pg 48 1.34 – 1.73 2.05 0.55 2.52 5

Long, metal metric threading

m-seal MV M12x1.5-L 3.0-6.5 84201400 M12x1,5 0.12 – 0.26 0.85 0.47 0.55 50
1010
FITTINGS

Cable fitting m-seal® MV (metal version) (Continued...)

Type Order No. Connecting Clamping range (LW) EH GL SW 1 / 2 Pack
thread inch inch inch inch qty.

m-seal MV M16x1.5-L 5.0-10.0 84201402 M16x1,5 0.2 – 0.39 1 0.47 0.79 50

m-seal MV M20x1.5-L 6.0-12.0 84201404 M20x1,5 0.24 – 0.47 1 0.47 0.87 50
m-seal MV M25x1.5-L 11.0-17.0 84201406 M25x1,5 0.43 – 0.67 1.22 0.47 1.06 25
m-seal MV M32x1.5-L 15.0-21.0 84201408 M32x1,5 0.59 – 0.83 1.32 0.59 1.34 10
m-seal MV M40x1.5-L 19.0-28.0 84201410 M40x1,5 0.75 – 1.1 1.65 0.59 1.69 10
m-seal MV M50x1.5-L 27.0-38.0 84201412 M50x1,5 1.06 – 1.5 1.97 0.59 2.28 5
m-seal MV M63x1.5-L 34.0-44.0 84201414 M63x1,5 1.34 – 1.73 2.06 0.59 2.52 / 2.68 5

Long, metal PG threading

m-seal MV Pg 7-L 3.0-6.5 84201200 Pg 07 0.12 – 0.26 0.86 0.39 0.55 50
m-seal MV Pg 9-L 4.0-8.0 84201202 Pg 09 0.16 – 0.31 0.89 0.39 0.67 50
m-seal MV Pg 11-L 5.0-11.0 84201204 Pg 11 0.2 – 0.43 1 0.39 0.79 50
m-seal MV Pg 13.5-L 6.0-12.0 84201206 Pg 13.5 0.24 – 0.47 0.95 0.39 0.87 50
m-seal MV Pg 16-L 10.0-14.0 84201208 Pg 16 0.39 – 0.55 1.08 0.39 0.94 25
m-seal MV Pg 21-L 13.0-18.0 84201210 Pg 21 0.51 – 0.71 1.23 0.47 1.18 20
m-seal MV Pg 29-L 18.0-25.0 84201212 Pg 29 0.71 – 0.98 1.55 0.47 1.57 10
m-seal MV Pg 36-L22.0-32.0 84201214 Pg 36 0.87 – 1.26 1.86 0.55 1.97 5
m-seal MV Pg 42-L 30.0-38.0 84201216 Pg 42 1.18 – 1.5 1.88 0.63 2.28 5
m-seal MV Pg 48-L 34.0-44.0 84201218 Pg 48 1.34 – 1.73 2.05 0.71 2.52 5

1)
With CSA approval
2)
With CSA- and cURus- approval
3)
With CSA- and cULus- approval

1011
FITTINGS

Cable fitting m-seal® EMC (EMV)

EH GL

LW
SW2 SW1

PRODUCT INFORMATION SPECIFICATIONS

With the m-seal EMC (EMV) cable fittings, The m-seal EMC (EMV) cable fitting features -4 – 212 °F
simple radial and axial movement of the the following advantages: Short periods 302 °F
cable are possible, even at contact location. • Large seal and clamping area
The contact finger surfaces with rounded • With integrated strain relief
edges prevent damage to the conductor. • High protection class IP 68
i.a.w. UL94 V2 self-extinguishing
In addition, the large surface on the contact • High contract rating, even at vibration
finger makes low contact resistance possible, conditions IP 68
even on loosely woven cables (the contact • Very simple and rapid assembly without
area does not press into the conductor). tools Strain relief according to DIN EN 50262
• Suitable for the highest requirements of
today’s technology
• Very good shielding attenuation

Type Order No. Connecting Clamping range (LW) Contact diameter EH GL SW 1 / 2 Pack
thread inch inch inch inch inch qty.

Metric metal thread / EMC version

m-seal EMC M12x1.5 3.0-6.51) 84201800 M12x1,5 0.12 – 0.26 0.08 – 0.2 1.10 0.24 0.55 50
m-seal EMC M16x1.5 5.0-10.0 1)
84201802 M16x1,5 0.2 – 0.39 0.14 – 0.31 1.34 0.24 0.79 50
m-seal EMC M20x1.5 6.0-12.0 84201804 M20x1,5 0.24 – 0.47 0.18 – 0.39 1.50 0.24 0.94 50
m-seal EMC M25x1.5 10.0-18.0 1)
84201806 M25x1,5 0.39 – 0.71 0.28 – 0.55 1.65 0.31 1.18 25
m-seal EMC M32x1.5 16.0-25.0 2)
84201808 M32x1,5 0.63 – 0.98 0.47 – 0.79 1.97 0.35 1.57 10
m-seal EMC M40x1.5 22.0-32.02) 84201810 M40x1,5 0.87 – 1.26 0.71 – 1.06 2.24 0.35 1.97 5
m-seal EMC M50x1.5 30.0-38.0 2)
84201812 M50x1,5 1.18 – 1.5 1.02 – 1.34 2.68 0.35 2.28 5
m-seal EMC M63x1.5 34.0-44.02) 84201814 M63x1,5 1.34 – 1.73 1.18 – 1.57 2.72 0.55 2.52 / 2.68 5

1)
With cURus- approval
2)
With cULus- approval

1012
Accessories

1013
CABLE ENTRY / CABLE RETAINING

KDL/E catch hook

PRODUCT INFORMATION SPECIFICATIONS

Catch hooks for fixing the KDL/E types in the
control cabinet cut-out -40.00 – 284 °F

• No screws necessary Polyamide 6.6

V0

Type Order No. Color Pack

qty.

Spare parts
Catch hooks 1.5 – 2.0 mm (0.06 – 0.08 inch) 8712102000 Black 10
Catch hooks 2.1 – 2.7 mm (0.08 – 0.11 inch) 8712101800 Black 10
Catch hooks 2.8 – 3.4 mm (0.11 – 0.13 inch) 8712101600 Black 10
Catch hooks 3.5 – 4.1 mm (0.14 – 0.16 inch) 8712101400 Black 10

1014
CABLE ENTRY / CABLE RETAINING

SBB control cabinet floor plate

PRODUCT INFORMATION SPECIFICATIONS

The control cabinet floor plate can be in- Non-required cut-outs can be closed with the
stalled in Rittal (type CM and TS8) control BP/H 24 blanking plate. -40.00 – 257 °F
cabinets. Up to 5 cable entry systems can be • Protection category IP 54 when properly Floor sheeting: Galvanized sheet steel
installed. assembled as a system (control cabinet + Locking plates: Polyamide 6.6
Locking plates of Type VP 24 or VP/N 24 floor plate)
V0
are included with the supply of the control • Can be installed entirely retrospectively
cabinet floor plates. These are required to • Earthing points (M6 and M8) available on IP 54 when installed correctly
lock the floor sheeting into place. both side

Type Order No. For control cabinet width No. Plate thickness A B Pack
inch Location spaces inch inch inch qty.

and M5 threads
SBB-M5 420-20001) 87821012 39.37 2x 24-pin 0.06 16.69 3.94 1
SBB-M5 460-2000 87821022 23.62 2x 24-pin 0.06 18.27 3.94 1
SBB-M5 520-30001) 87821032 47.24 3x 24-pin 0.06 20.63 3.94 1
SBB-M5 660-3000 87821042 31.50 3x 24-pin 0.06 26.14 3.94 1

with through-hole
SBB 420 - 20001) 87821010 39.37 2x KDL/E 24 | BPH 0.06 16.69 3.94 1
SBB 460 - 2000 87821020 23.62 2x KDL/E 24 | BPH 0.06 18.27 3.94 1
SBB 520 - 3000 1)
87821030 47.24 3x KDL/E 24 | BPH 0.06 20.63 3.94 1
SBB 660 - 3000 87821040 31.50 3x KDL/E 24 | BPH 0.06 26.14 3.94 1
SBB 860 - 5000 2)
87821050 39.37 5x KDL/E 24 | BPH 0.06 34.02 3.94 1

Replacement part: Locking plates

VP24 87821090 5
suitable for KDL/E 24
VP/N 24 87821092 5
suitable for KDP, KDL/C and KDL/D 24

1)
Cabinet width with central strut
2)
Cabinet width without central strut

1015
CABLE ENTRY / CABLE RETAINING

KDP/H conduit connector

PRODUCT INFORMATION SPECIFICATIONS

The KDP/H conduit connection enables a • Line protection
connection to our Murrflex M50/P48 cable • Contaminant water and water jet -40.00 – 230.00 °F
protection conduits with standard corrugation protection
on the cable entry plates of Types KDP/N 24, • Easy assembly and disassembly Polyamide 6
KDP/X 24 and KDP/E 24. The conduit con- • Compact design
V0
nection is comprised of a lower part that is • For all Murrflex conduits of sizes M50/
screwed together with the cable entry plate P48 with standard corrugation
and an upper part that engages with the
lower part after the cables have been feed
through the cable entry plate without tools.

Type Order No. Color A B a b Ø EH Pack

inch inch inch inch inch inch qty.

KDP/H 48 87301098 Black 5.83 2.36 2.09 4.17 0.22 2.56 1

1016
CABLE ENTRY / CABLE RETAINING

Blanking plate (plastic version)

c c

d Øe
b
d
a

PRODUCT INFORMATION SPECIFICATIONS

The blanking plates are suited for sealing
cut-outs for 16- or 24-pole connectors. -40.00 – 257 °F
BP, BP/N: Polyamide 6.6
• Integrated seal BP/H: TPE
• BP/N can be snap-fitted or screw-fas- V0 BP, BP/N:
tened HB BP/H:
• BP/H snap-fit assembly IP 54 BP:
IP 65 BP/N:
IP 42 BP/H:

Type Order No. Color Pack

qty.

Reinforced version
BP 16 87171620 Black 10
BP 24 87171622 Black 10

High design, latchable from plate thickness 1.5–2.0 mm

BP/N 24 87171624 Black 1

Flexible version
BP/H 24 87171626 Black 1

Dimension table

Type Order No. Installation height A B a b c d e

inch inch inch inch inch inch inch inch

Reinforced version
BP 16 87171620 0.31 4.57 2.28 3.39 1.42 2.03 0.63 0.22
BP 24 87171622 0.31 5.75 2.28 4.41 1.42 2.56 0.63 0.22

High design, latchable from plate thickness 1.5–2.0 mm

BP/N 24 87171624 0.61 5.75 2.28 4.41 1.42 2.56 0.63 0.22

Flexible version
BP/H 24 87171626 0.18 5.75 1.89 4.41 1.42 2.56 0.63 0.22

1017
CABLE ENTRY / CABLE RETAINING

Blanking plate (metal version)

PRODUCT INFORMATION SPECIFICATIONS

Blanking plate for closing off unused adapter Plate: See article
positions and cut-outs. Seal: NBR
The stainless steel version is particularly suit-
able for applications in the food and chemical
industry.
Integrated threaded bolts mean that no
screws are visible from outside.
Mounting set included in delivery.

Type Order No. Color Material Plate Pack

qty.

KDP BP 120/190 V4A 87663145 Smoothed V4A (1.4571) 1

KDP BP 120/190 ALU 87663096 RAL 7035 AlMg3 (3.3535) 1
KDP BP 90/144 ALU 87663091 RAL 7035 AlMg3 (3.3535) 1
KDP BP 90/221 ALU 87663093 RAL 7035 AlMg3 (3.3535) 1
KDP BP 100/145 V4A 87663090 Smoothed V4A (1.4571) 1
KDP BP 105/155 ALU 87663092 RAL 7035 AlMg3 (3.3535) 1
KDP BP 105/155 V4A 87663094 Smoothed V4A (1.4571) 1

1018
CABLE ENTRY / CABLE RETAINING

Rittal adapter plate

PRODUCT INFORMATION SPECIFICATIONS

The Rittal adapter plates can be directly Stainless steel V2A (1.4301)
mounted into the prefabricated cut-outs from V4A (1.4571)
Rittal casings. They are used to accommo- Steel (1.1203)
date various Murrplastik cable entry systems.
Unused adapter spaces can be closed off
using blanking plates.

Type Order No. Color Location spaces Cutting Plate thickness A B Pack
inch inch inch qty.

With integral M5/M6 threads

AP/RI-TS/1+1-M6 St-vz 87663220 Gray 1x KDL-Jumbo 1 TS8 0.08 13.31 6.61 1
1x KDL-Jumbo 2
AP/RI-TS/1+2-M5/M6 St-vz 87663216 Gray 1x KDL-Jumbo 1 TS8 0.08 13.31 6.61 1
2x 24-pole
AP/RI-TS/2-M6 St-vz 87663218 Gray 2x KDL-Jumbo 1 TS8 0.08 13.31 6.61 1
APM/RI-2 1x24-M5, RAL 7035 1)
87823080 RAL 7035 1x 24-pole 2 0.06 8.70 3.54 1
APM/RI-3 1x24-M5, RAL 70351) 87823070 RAL 7035 1x 24-pole 3 0.06 12.99 3.54 1
APM/RI-3 2x24-M5, RAL 70351) 87823072 RAL 7035 2x 24-pole 3 0.06 12.99 3.54 1
APM/RI-4 2x24-M5, RAL 7035 1)
87823050 RAL 7035 2x 24-pole 4 0.06 13.35 5.87 1
APM/RI-4 4x24-M5, RAL 70351) 87823052 RAL 7035 4x 24-pole 4 0.06 13.35 5.87 1
APM/RI-5 3x24-M5, RAL 7035 1)
87823060 RAL 7035 3x 24-pole 5 0.06 21.02 5.87 1
APM/RI-5 6x24-M5, RAL 70351) 87823062 RAL 7035 6x 24-pole 5 0.06 21.02 5.87 1
KDP AP/RI-TS/3-M5 87663212 Smoothed 3x 24-pole TS8 0.08 13.31 6.61 1
KDP AP/RI-TS/4-M5 87663214 Smoothed 4x 24-pole TS8 0.08 13.31 6.61 1

With 24-pin cut-outs

APM/RI-2 1x24, RAL 70351) 87823040 RAL 7035 1x 24-pole 2 0.06 8.70 3.54 1
APM/RI-3 1x24, RAL 70351) 87823030 RAL 7035 1x 24-pole 3 0.06 12.99 3.54 1
APM/RI-3 2x24, RAL 70351) 87823032 RAL 7035 2x 24-pole 3 0.06 12.99 3.54 1
APM/Ri-4 2x24, RAL 70351) 87823010 RAL 7035 2x 24-pole 4 0.06 13.35 5.87 1
APM/Ri-4 4x24, RAL 7035 1)
87823012 RAL 7035 4x 24-pole 4 0.06 13.35 5.87 1
APM/Ri-5 3x24, RAL 7035 1)
87823020 RAL 7035 3x 24-pole 5 0.06 21.02 5.87 1
APM/Ri-5 6x24, RAL 70351) 87823022 RAL 7035 6x 24-pole 5 0.06 21.02 5.87 1
KDP AP/RI-TS/3 87663202 Smoothed 3x 24-pole TS8 0.08 13.31 6.61 1
KDP AP/RI-TS/4 87663204 Smoothed 4x 24-pole TS8 0.08 13.31 6.61 1
KDP 24/AP/RI-KL/1 87663073 Smoothed 1x 24-pole 2 0.08 8.70 3.54 1
KDP 24/AP/RI-BG/2 87663074 Smoothed 2x 24-pole BG 1558.510 0.08 13.98 3.62 1
1019
CABLE ENTRY / CABLE RETAINING

Rittal adapter plate (Continued...)

Type Order No. Color Location spaces Cutting Plate thickness A B Pack
inch inch inch qty.

KDP 24/AP/RI-AE/2 87663072 Smoothed 2x 24-pole 3 0.08 12.99 3.54 1

KDP 24/AP/RI-BG/3+4 87663075 Smoothed 3x 24-pole BG 1559.510 0.08 21.85 3.62 1
2x M20
2x M25
KDP 24/AP/RI-AE/4 2)
87663070 Smoothed 4x 24-pole 4 0.08 13.35 5.87 1
KDP 24/AP/RI-AE/6+2 2)
87663071 Smoothed 6x 24-pole 5 0.08 21.02 5.87 1
2x M32

For metal KDP

KDP AP 149/105/3 St1) 87663084 RAL 7035 3x KDP 105/xx 5 0.10 21.02 5.87 1
KDP AP 149/100/2 V4A 87663080 Smoothed 2x KDP 100/xx 4 0.10 13.35 5.87 1
KDP AP 149/100/3 V4A 87663082 Smoothed 3x KDP 100/xx 5 0.10 21.02 5.87 1

With M50 cut-out

AP/RI-TS/3x50 87663208 Smoothed 3x M50 TS8 0.08 13.31 6.61 1
AP/RI-TS/5x50 87663206 Smoothed 5x M50 TS8 0.08 13.31 6.61 1

BP RI-TS/338x168 87663210 Smoothed TS8 0.08 13.31 6.61 1

1)
Material steel (1.1203)
The KDL/E 24/xx cable entry system is mounted in a staggered pattern on the cut-outs. As a result, KDL/E 24/xx units cannot be positioned on top of
2)

one another. The configuration plan illustrates the possible layouts for the KDL/E 24/xx cable entry system.

1020
CABLE ENTRY / CABLE RETAINING

Sarel adapter plate

PRODUCT INFORMATION SPECIFICATIONS

Adapter plate can be fitted directly into the Stainless steel 1.4301
standard cut-outs of Sarel cabinets. They are (V2A)
used to accommodate various Murrplastik
cable entry systems. Unused adapter spaces
can be closed off using blanking plates. A
blade terminal L6.3 is available for grounding
the adapter plate. Adapter plate without
sealing. The seal is part of the cabinet acces-
sories.

Type Order No. Color Location spaces Cutting Plate thickness A B Pack
inch inch inch qty.

With 24-pin cut-outs

KDP 24/AP/SA/2+0 87663102 Smoothed 2x 24-pole 515X4 0.08 13.58 5.12 1
KDP 24/AP/SA/2+4 87663112 Smoothed 2x 24-pole 515X5 0.08 17.52 5.12 1
4x M32
KDP 24/AP/SA/3+2 87663108 Smoothed 3x 24-pole 515X6 0.08 21.46 5.12 1
2x M32
KDP 24/AP/SA/5+4 87663100 Smoothed 5x 24-pole 515X7 0.08 19.49 8.66 1
2x M25
2x M50

For metal KDP

KDP AP/SA/130/100/2 87663130 Smoothed 2x KDP 100/xx 515X4 0.10 13.58 5.12 1
KDP AP/SA/130/100/2+4 87663128 Smoothed 2x KDP 100/xx 515X5 0.10 17.52 5.12 1
4x M32
KDP AP/SA/130/100/3+2 87663126 Smoothed 2x KDP 100/xx 515X6 0.10 21.46 5.12 1
3x M32

For KDP/R
KDP/R AP/SA-1 87663106 Smoothed 6x M63 515X6 0.08 21.46 5.12 1
KDP/R AP/SA-2 87663110 Smoothed 5x M63 515X5 0.08 17.52 5.12 1
KDP/R AP/SA-3 87663114 Smoothed 3x M63 515X4 0.08 13.58 5.12 1
KDP/R AP/SA-4 87663104 Smoothed 2x M32 515X3 0.08 9.65 5.12 1
2x M63

1021
CABLE ENTRY / CABLE RETAINING

Lohmeier adapter plate

PRODUCT INFORMATION SPECIFICATIONS

The Lohmeier adapter plates can be directly Stainless steel 1.4301
mounted into the prefabricated cut-outs (V2A)
from Lohmeier casings. They are used to
accommodate various Murrplastik cable
entry systems. Unused adapter spaces can
be closed off using blanking plates. A blade
terminal L6.3 is available for grounding the
adapter plate. Adapter plate come with seal
included.

Type Order No. Color Location Cutting Plate thickness A B Pack

spaces inch inch inch qty.

With 24-pin cut-outs

KDP 24/AP/LO-BG/1 87663078 Smoothed 1x 24-pole F200 type BG 0.08 7.64 3.62 1
KDP 24/AP/LO-BG/2 87663077 Smoothed 2x 24-pole F300 type BG 0.08 11.57 3.62 1

1022
CABLE ENTRY / CABLE RETAINING

Ensto adapter plate

PRODUCT INFORMATION SPECIFICATIONS

The Ensto adapter plates can be directly Stainless steel 1.4301
mounted into the prefabricated cut-outs (V2A)
from Ensto casings. They serve to retain
various Murrplastik cable entry systems.
Unused adapter spaces can be closed off
using blanking plates. A blade terminal L6.3
is available for grounding the adapter plate.
Adapter plate without sealing. The seal is
part of the cabinet accessories.

Type Order No. Color Location Cutting Plate thickness A B Pack

spaces inch inch inch qty.

With 24-pin cut-outs

KDP 24/AP/EN-KG/1 87663076 Smoothed 1x Cubo Type FFUF 0.08 8.46 3.35 1

1023
STRAIN RELIEF / CABLE FIXING PLATE

DH spacer sleeve

B C

G H
A

Two-tier installation

PRODUCT INFORMATION SPECIFICATIONS

The DH spacer sleeve is required for stacking
the ZL strain relief plate. This allows for ca- Brass
bles to be stacked, thereby saving space.

Type Order No. A B C G H Pack

inch inch inch inch inch qty.

For ZL 04 and ZL 05
DH 30/8 87701054 1.18 0.33 0.20 1.02 1.73 1

For ZL39 – 180/8
DH 32/6 87701052 1.26 0.47 0.25 1.10 1.81 1
DH 32/8: Typical material1) 87701062 1.26 0.51 0.33 1.10 1.81 1

1)
for ZL 180/8 only

1024
STRAIN RELIEF / CABLE FIXING PLATE

ELB insert bushing

B C

PRODUCT INFORMATION SPECIFICATIONS

The ELB insert bushing can be laid into the
strain relief plate type ZL. It prevents cold Brass
flow of the plastic at the fixing point during
heavy strain or permanent movement.

Type Order No. A B C Pack

inch inch inch qty.

For ZL39 – 180/6

ELB/6 87701050 0.26 0.47 0.24 1

For ZL 180/8
ELB/81) 87701060 0.26 0.53 0.32 1

1)
for ZL 180/8 only

1025
SECURING RIVET

BN securing rivet

PRODUCT INFORMATION SPECIFICATIONS

Plastic expansion rivets for the quick in-
stallation of components, e.g. cable ducts. -76 – 176 °F
Assembly tool BNW is optimally adjusted to
the fixing rivets. Only this tool brings out the Hostalene
full economical effect of the BN fixing rivet.

Type Order No. Color Holes Shaft Length Fixing thickness Fixing thickness Pack
inch inch Min. mm Max. mm qty.

BN 1 87621410 Gray 0.12 0.35 0.12 0.30 500

BN 2 87621412 Gray 0.18 0.39 0.12 0.31 500
BN 3 87621414 Gray 0.26 0.59 0.18 0.39 1000

1026
CABLE TIES

KB/KBM cable tie

PRODUCT INFORMATION SPECIFICATIONS

Cable ties are a reliable method for the The cable tie KKB 28 is equipped with a KB: Polyamide 6.6
economic bundling and fastening of cables, special locking mechanism and is especially KBM: Stainless steel 1.4301
cable harnesses, tubes, conduits and other suitable for heavy-duty applications. V2 for Type KB Black only
components. V2 for Type KKB only
The Black cable ties are suitable for outdoor The KBM metal cable tie is ideally used for
Black cable ties are UV stabilized
applications. EMC solutions. It creates greater contact
surface area for discharging sheath currents.

Type Order No. Color Length Width Bundle range Tensile strength Pack
inch inch inch max. qty.

Plastic cable ties

KB 151) 87661251 Black 2.95 0.09 0.59 60.00 1000
KB 20 1)
87661252 Black 3.86 0.10 0.79 60.00 1000
KB 221) 87661254 Black 4.72 0.10 1.18 80.00 1000
KB 25 1)
87661256 Black 5.51 0.14 1.30 130.00 1000
KB 30 1)
87661260 Black 6.30 0.18 1.50 180.00 1000
KB 451) 87661262 Black 7.01 0.19 1.77 220.00 1000
KB 50 1)
87661264 Black 7.87 0.11 1.97 80.00 1000
KB 551) 87661266 Black 7.87 0.19 1.97 220.00 1000
KB 75 1)
87661268 Black 11.42 0.19 2.95 220.00 100
KB 100 1)
87661270 Black 14.17 0.19 3.94 220.00 100
KB 1101) 87661272 Black 14.57 0.31 4.13 540.00 100
KB 15 1)
87661210 Natural color 2.95 0.09 0.59 60.00 1000
KB 201) 87661214 Natural color 3.86 0.10 0.79 60.00 1000
KB 22 1)
87661218 Natural color 5.12 0.10 1.18 80.00 1000
KB 25 1)
87661222 Natural color 5.51 0.14 1.30 130.00 1000
KB 301) 87661226 Natural color 6.30 0.18 1.50 180.00 1000
KB 45 1)
87661230 Natural color 7.01 0.19 1.77 220.00 1000
KB 50 1)
87661234 Natural color 7.87 0.11 1.97 80.00 1000
KB 551) 87661238 Natural color 7.87 0.19 1.97 220.00 1000
KB 75 1)
87661242 Natural color 11.42 0.19 2.95 220.00 100
KB 1001) 87661246 Natural color 14.17 0.19 3.94 220.00 100
KB 1101) 87661248 Natural color 14.57 0.31 4.13 540.00 100

Power cable tie with special lock

KKB 282) 87661258 Black 7.09 0.31 1.57 360.00 100

1027
CABLE TIES

KB/KBM cable tie (Continued...)

Type Order No. Color Length Width Bundle range Tensile strength Pack
inch inch inch max. qty.

Metal cable tie

KBM 15 87661014 Materialtypisch 7.87 0.17 1.97 445 100

The dimensions may deviate for technical or production reasons.

1)
Recommended assembly tool for all widths of KKBW to 6 mm width KBW 1K.
2)
Recommended assembly tool KKBW

1028
CABLE TIES

BF cable tie

PRODUCT INFORMATION SPECIFICATIONS

Cable tie with title block.
For use with ink pens or permanent water- -13 – 185 °F
proof markers.
BF20 (Fig. right) Polyamide
Labeling field lengthwise on cable.
BF45 (Fig. left)
Labeling field across the cable.

Type Order No. Color B E F L Bundle range Tensile strength Pack

inch inch inch inch inch max. qty.

BF 20 87681010 White 0.10 0.31 0.98 3.39 0.75 80.00 100

BF 45 87681012 Natural color 0.19 1.10 0.51 6.18 1.77 222.00 100

1029
SCREW-DOWN AND ADHESIVE HOLDER

SH screw-down holder

PRODUCT INFORMATION SPECIFICATIONS

The SH screw-down holder is used to fix
individual cables cost-effectively. It can be -40.00 – 185 °F
screwed or riveted to any surface.
Polyamide

Type Order No. Color L B H X Y Z Ø Pack

inch inch inch inch inch inch inch qty.

SH 1 87681210 White 0.59 0.39 0.28 0.20 0.08 0.28 0.15 100
SH 2 87681212 White 0.89 0.59 0.43 0.36 0.11 0.39 0.20 100

1030
SCREW-DOWN AND ADHESIVE HOLDER

KH screw-down and adhesive holder

PRODUCT INFORMATION SPECIFICATIONS

Adhesive holder, plastic. The retention force
can be increased by additional fastening with -40.00 – 185 °F
a screw. If pressure sensitive adhesives are
used, the surface must be smooth and free Polyamide
of dust and grease. Contaminated surfaces
must be cleaned with proper cleaning
agents.

Type Order No. Color L B H X Y Z Ø Pack

inch inch inch inch inch inch inch qty.

KH 1 87681220 White 0.75 0.75 0.24 0.16 0.07 0.30 0.17 100
KH 2 87681222 White 1.06 1.06 0.30 0.24 0.09 0.38 0.19 100

1031
VELCRO STRIP

KB-fix Velcro strip

PRODUCT INFORMATION SPECIFICATIONS

The KB-fix Velcro strip is made of Poly- • Very simple handling
propylene and Velour Polyamide. It serves • Fire classification V2 per UL94 -22 – 176 °F
as a mounting aid in the fields of electrical • Does not constrict sensitive lines such as Polypropylene (PP)
and pneumatic installations, for instance in fiber optic cables or pneumatic hoses Polyamide 6
steering and control cabinets, on machines • Can be opened and closed hundreds of
V2
and/or residential installations, for consumer times
applications and much more. The Velcro • No injuries possible from sharp edges, as
(hook and loop) fastener strips are avail- from shortened cable ties
able on a 25 m (82.02 ft) roll and are cut as
required.
Particular benefits of the KB-fix Velcro strip
are:

Type Order No. Color Width Pack

inch qty.

KB-fix 10-V2 87661802 Black 0.39 82.02

KB-fix 16-V2 87661804 Black 0.63 82.02
KB-fix 20-V2 87661806 Black 0.79 82.02
KB-fix 25-V2 87661808 Black 0.98 82.02
KB-fix 30-V2 87661810 Black 1.18 82.02

1032
SEALING PLUG

VST sealing plug

PRODUCT INFORMATION SPECIFICATIONS

VST sealing plugs are used to seal cable
grommets (KDT/ZE, KDT/X, etc.) and multi- -40.00 – 212 °F
line inserts for cable fittings not equipped
with lines. They provide a secure seal for not Polyamide
or no longer needed openings.

Type Order No. Color Ø Pack

inch qty.

VST 2 mm 87822010 Red 0.08 50

VST 3mm 87822012 Red 0.12 50
VST 4mm 87822014 Red 0.16 50
VST 5mm 87822016 Red 0.20 50
VST 6mm 87822018 Red 0.24 50
VST 7mm 87822020 Red 0.28 50
VST 8mm 87822022 Red 0.31 50

1033
1034
Tools

1035
RIVETING TOOL

BNW riveting tool

PRODUCT INFORMATION
Only this tool brings out the full economical
effect of the BN fixing rivet. The tools are
matched to the size of the rivets.
For type BN fixing rivets, see “Accessories”
chapter.

Type Order No. For blind rivet Pack

Type qty.

BNW 1 87641010 BN 1 1
BNW 2 87641012 BN 2 1
BNW 3 87641014 BN 3 1

1036
ASSEMBLY TOOL

KS cable shears

PRODUCT INFORMATION
Sturdy cable shears KS1. Suitable for re-
moving cable sheathing and braided shields.
EW-PAP cable protection conduit with metal
braiding can be processed with these shears.

Type Order No. Approx. Length Pack

inch qty.

KS 1 87661016 6.89 1
With adjustable internal blade

1037
ASSEMBLY TOOL

KM cable stripping knife

PRODUCT INFORMATION
Special cable stripping knife KM for stripping
of wiring.

Type Order No. Approx. Length Pack

inch qty.

KM 87661018 6.69 1

1038
ASSEMBLY TOOL

KBW / KKBW cable tie tool for plastic cable ties

KKBW KBW 1K

PRODUCT INFORMATION
Cable tie tool KBM and KKBW for mounting • KBW 1K with adjustable automated
of plastic cable ties. cutting mechanism, plastic casing,
automated metal cutting mechanism
• KKBW is full metal with manual cutting
mechanism

Type Order No. Approx. Length Pack

inch qty.

For plastic cable ties

KBW 1K 87661012 6.69 1
With adjustable automatic cutting device

Suitable for cable ties of up to 0.24 inch (6 mm) wide

For plastic cable ties type KKB

KKBW 87669094 7.48 1
Ties with manual cutting mechanism

Cable tie tool suitable for plastic cable ties KKB 28 / KB 110.

Also suitable for plastic cable ties up to 0.31 inch (8 mm) wide

1039
ASSEMBLY TOOL

MMH magnetic assembly aid

PRODUCT INFORMATION SPECIFICATIONS

The magnetic mounting aid is used to hold
the lock nuts on the control cabinet during Polyamide 6
installation.
This helps to install all 24-pole cable entries
quickly and easily and from just one side of
the control cabinet.

Type Order No. Pack

qty.

Without centering aid

MMH 87661002 1

With centering aid

MMH-Z 87661006 1

1040
Punching tools

1041
PUMPS

SW-HG hydraulic manual punch

PRODUCT INFORMATION SPECIFICATIONS

Practical manual punch without additional • Hydraulic punch made of high-strength
conduit and cylinder, ideal for workshop and aluminum
assembly. • Overload protection via overpressure valve
• Ergonomic handle, springs back automat-
ically

Type Order No. Weight Punching force Operating pressure Pack

kg / piece kN bar qty.

Compact hydraulic manual punch, straight

SW-HG hydraulic manual punch 87801010 2.94 75 9427.45 1

consisting of:
1 pce. compact hydraulic manual punch
1 each tension bolt version A
1 pce. tension bolt version A
1 pce. spacer bushing set (3-parts)
1 pce. tap drill 0.43 inch (11.0 mm)
1 pce. transport case

Punching performance, round hole perforator:

0.08 inch (2.0 mm) sheet steel (St37) Ø max. 3.31 inch (84 mm)
0.12 inch (3.0 mm) sheet steel (St37) Ø max. 2.52 inch (64 mm)
0.08 inch (2.0 mm) stainless steel (V2A) Ø max. 3.31 inch (84 mm)

Punching performance, square hole perforator:

0.08 inch (2.0 mm) sheet steel (St37) max. 1.42 x 4.41 inch (36 x 112 mm)

Spare part see chapter “spare part for punching tool”

1042
PUMPS

SW-HW hydraulic manual punch

PRODUCT INFORMATION SPECIFICATIONS

Practical manual punch without additional • Hydraulic punch made of high-strength
conduit and cylinder, ideal for workshop and aluminum
assembly. • Overload protection via overpressure valve
• Ergonomic handle, springs back automat-
ically
• The angle head can be pivoted 360° for
better handling.

Type Order No. Weight Punching force Operating pressure Pack

kg / piece kN bar qty.

Compact hydraulic manual punch with pivoting head

SW-HW hydraulic manual angled punch 87801012 3.3 75 9427.45 1

consisting of:
1 pce. compact hydraulic manual punch
1 each tension bolt version A
1 pce. tension bolt version A
1 pce. spacer bushing set (3-parts)
1 pce. tap drill 0.43 inch (11.0 mm)
1 pce. transport case

Punching performance, round hole perforator:

0.08 inch (2.0 mm) sheet steel (St37) Ø max. 3.31 inch (84 mm)
0.12 inch (3.0 mm) sheet steel (St37) Ø max. 2.52 inch (64 mm)
0.08 inch (2.0 mm) stainless steel (V2A) Ø max. 3.31 inch (84 mm)

Punching performance, square hole perforator:

0.08 inch (2.0 mm) sheet steel (St37) max. 1.42 x 4.41 inch (36 x 112 mm)

Spare part see chapter “spare part for punching tool”

1043
PUMPS

SW-HF hydraulic foot punch

PRODUCT INFORMATION SPECIFICATIONS

Practical hydraulic punch with foot pump; • Overload protection via installed pump
ideal for use in the workshop. safety valve
The foot pump does not require use of the • Better punching performance than with a
hands, leaving both hands free for exact manual punch
positioning and punching at the control • For larger punching tools
cabinet. The support frame of the foot pump
is splayed. This provides for stable, anti-tip
working.

Type Order No. Weight Punching force Operating pressure Pack

kg / piece kN bar qty.

Hydraulic punch with foot pump

SW-HF hydraulic punch with foot pump 87801014 13.92 100 10152.64 1

consisting of:
1 pce. hydraulic cylinder with quick coupling
1 pce. hydraulic conduit 9.19 ft (2.8 m)
1 each tension bolt version A
1 pce. tension bolt version A
1 pce. spacer bushing set (5-parts)
1 pce. tap drill 0.43 inch (11.0 mm)
1 pce. sheet steel transport case

Punching performance, round hole perforator:

0.08 inch (2.0 mm) sheet steel (St37) Ø max. 5.91 inch (150 mm)
0.12 inch (3.0 mm) sheet steel (St37) Ø max. 3.94 inch (100 mm)
0.08 inch (2.0 mm) stainless steel (V2A) Ø max. 3.94 inch (100 mm)

Punching performance for square hole punch:

0.08 inch (2.0 mm) sheet steel (St37) max. 5.43 x 5.43 inch (138 x 138 mm)
0.08 inch (2.0 mm) stainless steel sheet (V2A) max. 3.62 x 3.62 inch (92 x 92 mm)

Spare part see chapter “spare part for punching tool”

1044
DIE PLATES

SW-WR punching tools (rectangular)

PRODUCT INFORMATION SPECIFICATIONS

Several punching tools for the creation of
square or rectangular cut-outs. These hole Steel
punches are delivered a plastic transport
case. Also ideal for mounting use. Cor-
responding tension bolt is included in the
delivery. The attachment points for the screw
holes can be punch-marked during the
punching process.

Type Order No. Punching Tension- Cut-out for Steel type Suited for Pack
inch ing screw Hydraulic punch qty.
Type SW-HG (HW) / SW-HF
Hole puncher (rectangular) for sheet steel with centering tips
SW-WR 17.0x19.01) 87801330 0.67 x 0.75 G Sheet steel •/• 1
SW-WR 21,8x25,8 1)
87801332 0.86 x 1.02 K Sheet steel •/• 1
SW-WR 22,0x30,01) 87801334 0.87 x 1.18 K Sheet steel •/• 1
SW-WR 22,0x42,0 1)
87801336 0.87 x 1.65 K Sheet steel •/• 1
SW-WR 23,0x57,0 1)
87801339 0.91 x 2.24 K Sheet steel •/• 1
SW-WR 25,0x50,01) 87801340 0.98 x 1.97 K Sheet steel •/• 1
SW-WR 36.0x52.0 1)
87801350 36.0 x 2.05 D Industrial Connectors 6 pole Sheet steel •/• 1
SW-WR 36,0x46,0 1)
87801358 1.42 x 1.81 D KDL/C & KDL/D 6 Sheet steel •/• 1
SW-WR 36,0x65,01) 87801352 1.42 x 2.56 D KDL/C & KDL/D 10 Sheet steel •/• 1
SW-WR 45,0x92,0 1)
87801342 1.77 x 3.62 D Sheet steel •/• 1
SW-WR 46,0x112,01) 87801356 1.81 x 4.41 E Sheet steel -/• 1
SW-WR 46,0x86,0 1)
87801354 1.81 x 3.39 D Sheet steel •/• 1
SW-WR 46,0x92,0 1)
87801344 1.81 x 3.62 D Sheet steel •/• 1
SW-WR 68.0x138.02) 87801346 2.68 x 5.43 E Sheet steel -/• 1
SW-WR 82,0x132,0 2)
87801382 3.23 x 5.2 E cablequick Type 100 Sheet steel -/• 1
SW-WR 86,0x36,01) 87801292 3.39 x 1.42 D KDL/xx 16 (screw fastened) Sheet steel •/• 1
SW-WR 91,0x36,0 1)
87801294 3.58 x 1.42 D KDL/E 16 (snap fastened) Sheet steel •/• 1
SW-WR 112,0x36,0 1)
87801290 4.41 x 1.42 D KDP/xx 24, KDL/xx 24 Sheet steel •/• 1
SW-WR-VA 112.0x36.03) 87801291 4.41 x 1.42 D KDP/xx 24, KDL/xx 24 Stainless sheet steel •/• 1

1)
suitable for sheet steel <= 2 mm (0.12 in)
2)
suitable for sheet steel <= 3 mm (0.12 in)
3)
suitable for steel and stainless steel sheets <= 2 mm (0.08 in)

1045
DIE PLATES

SW-WQ punching tools (square)

PRODUCT INFORMATION SPECIFICATIONS

Several punching tools for the creation of
square or rectangular cut-outs. These hole Steel
punches are delivered a plastic transport
case. Also ideal for mounting use. Cor-
responding tension bolt is included in the
delivery. The attachment points for the screw
holes can be punch-marked during the
punching process.

Type Order No. Punching Tensioning Steel type Suited for Pack
inch screw Hydraulic punch qty.
Type SW-HG (HW) / SW-HF
Hole perforator (rectangular) for sheet steel with centering tips
SW-WQ 12.7x12.71) 87801300 0.5 x 0.5 H Sheet steel •/• 1
SW-WQ 15,8x15,8 1)
87801302 0.62 x 0.62 H Sheet steel •/• 1
SW-WQ 19,0x19,0 1)
87801304 0.75 x 0.75 G Sheet steel •/• 1
SW-WQ 22,2x22,21) 87801306 0.87 x 0.87 G Sheet steel •/• 1
SW-WQ 24,0x24,0 1)
87801308 0.94 x 0.94 G Sheet steel •/• 1
SW-WQ 25,4x25,41) 87801310 1.0 x 1.0 K Sheet steel •/• 1
SW-WQ 45,5x45,5 1)
87801312 1.79 x 1.79 F Sheet steel •/• 1
SW-WQ 46.0x46.0 1)
87801314 1.81 x 1.81 F Sheet steel •/• 1
SW-WQ 50,8x50,81) 87801316 2.0 x 2.0 D Sheet steel •/• 1
SW-WQ 68,0x68,0 1)
87801318 2.68 x 2.68 D Sheet steel •/• 1
SW-WQ 92,0x92,01) 87801320 3.62 x 3.62 E Sheet steel -/• 1
SW-WQ 125,0x125,01) 87801322 4.92 x 4.92 E Sheet steel -/• 1
SW-WQ 138,0x138,0 1)
87801324 5.43 x 5.43 E Sheet steel -/• 1

1)
suitable for sheet steel <= 2 mm (0.12 in)

1046
DIE PLATES

SW-WE punching tools (round)

PRODUCT INFORMATION SPECIFICATIONS

Round hole punch, individual tools for steel or
stainless steel plates. Versions for punching Steel
holes in metric or Pg threaded connections.

• Metric sizes from M16 to M63

• Pg sizes from Pg9 to Pg48

Type Order No. Di- Punch- Tension- Cut-out for Steel type Suited for Pack
men- ing ing screw Hydraulic punch qty.
sion inch Type SW-HG (HW) / SW-HF
Hole perforator (round) for steel sheets
SW-WE-NS M161) 87801210 M16 0.64 A Sheet steel •/• 1
SW-WE-NS M20 1)
87801212 M20 0.80 A Sheet steel •/• 1
SW-WE-NS M25 1)
87801214 M25 1 A Sheet steel •/• 1
SW-WE-NS M322) 87801216 M32 1.28 C Sheet steel •/• 1
SW-WE-NS M40 2)
87801218 M40 1.59 C KDPR/F M40/xx Sheet steel •/• 1
SW-WE-NS M50 2)
87801220 M50 1.99 C KDP/R M50/x, KDL/D-R M50/xx Sheet steel •/• 1
SW-WE-NS M632) 87801222 M63 2.50 C KDP/R M63/x Sheet steel •/• 1
SW-WE-NS Pg09 1)
87801238 Pg09 0.60 A Sheet steel •/• 1
SW-WE-NS Pg111) 87801240 Pg11 0.73 A Sheet steel •/• 1
SW-WE-NS Pg13 1)
87801242 Pg13 0.80 A Sheet steel •/• 1
SW-WE-NS Pg16 1)
87801244 Pg16 0.89 A Sheet steel •/• 1
SW-WE-NS Pg211) 87801246 Pg21 1.11 A Sheet steel •/• 1
SW-WE-NS Pg29 2)
87801248 Pg29 1.46 C Sheet steel •/• 1
SW-WE-NS Pg362) 87801250 Pg36 1.85 C Sheet steel •/• 1
SW-WE-NS Pg42 2)
87801252 Pg42 2.13 C Sheet steel •/• 1
SW-WE-NS Pg48 2)
87801254 Pg48 2.36 C Sheet steel •/• 1

Hole perforator (round) for Steel and stainless steel

SW-WE-VA M163) 87801224 M16 0.64 B Steel and stainless steel •/• 1
SW-WE-VA M203) 87801226 M20 0.80 B Steel and stainless steel •/• 1
SW-WE-VA M25 3)
87801228 M25 1 B Steel and stainless steel •/• 1
SW-WE-VA M324) 87801230 M32 1.28 C Steel and stainless steel •/• 1
SW-WE-VA M40 4)
87801232 M40 1.59 C KDPR/F M40/xx Steel and stainless steel •/• 1
SW-WE-VA M50 4)
87801234 M50 1.99 C KDP/R M50/x, KDL/D-R M50/xx Steel and stainless steel •/• 1
SW-WE-VA M634) 87801236 M63 2.50 C KDP/R M63/x Steel and stainless steel •/• 1
SW-WE-VA Pg09 3)
87801256 Pg09 0.60 B Steel and stainless steel •/• 1
SW-WE-VA Pg113) 87801258 Pg11 0.73 B Steel and stainless steel •/• 1
1047
DIE PLATES

SW-WE punching tools (round) (Continued...)

Type Order No. Di- Punch- Tension- Cut-out for Steel type Suited for Pack
men- ing ing screw Hydraulic punch qty.
sion inch Type SW-HG (HW) / SW-HF
SW-WE-VA Pg133) 87801260 Pg13 0.80 B Steel and stainless steel •/• 1
SW-WE-VA Pg163) 87801262 Pg16 0.89 B Steel and stainless steel •/• 1
SW-WE-VA Pg214) 87801264 Pg21 1.11 C Steel and stainless steel •/• 1
SW-WE-VA Pg294) 87801266 Pg29 1.46 C Steel and stainless steel •/• 1
SW-WE-VA Pg36 4)
87801268 Pg36 1.85 C Steel and stainless steel •/• 1
SW-WE-VA Pg42 4)
87801270 Pg42 2.13 C Steel and stainless steel •/• 1
SW-WE-VA Pg484) 87801272 Pg48 2.36 C Steel and stainless steel •/• 1
SW-WE-VA 30,5 4)
87801231 1.20 C Steel and stainless steel •/• 1

1)
suitable for sheet steel <= 2 mm (0.12 in)
2)
suitable for sheet steel <= 3 mm (0.12 in)
3)
suitable for steel and stainless steel sheets <= 2 mm (0.08 in)
4)
suitable for steel and stainless steel sheets <= 2.5 mm (0.08 in)

1048
DIE PLATES

SW-WS punching tool sets

PRODUCT INFORMATION SPECIFICATIONS

Round hole punch sets from M16 to M40
or to M63 and from PG9 to PG48. For steel Steel
or stainless steel plates. Punching tools are
delivered in handy plastic transport case.
Also ideal for mounting use.

Type Order No. Tensioning screw Steel type Pack

Type qty.

Sheet metal perforator set for sheet steel

SW-WS-NS PG9-PG48 87801278 A&C Sheet steel 1
Consisting of: each. 1 ea PG9, PG11, PG13, PG16, PG21, PG29, PG36, PG42, PG48, transport case
SW-WS-NS M16-M40 87801280 A&C Sheet steel 1
Consisting of: each. 1 ea M16, M20 (PG13), M25, M32, M40, transport case
SW-WS-NS M16-M63 87801282 A&C Sheet steel 1
Consisting of: each. 1 ea M16, M20 (PG13), M25, M32, M40, transport case

Sheet metal perforator set for stainless sheet steel

SW-WS-VA M16-M40 87801284 B&C Steel and stainless steel 1
Consisting of: each. 1 ea M16, M20 (PG13), M25, M32, M40, transport case
SW-WS-VA M16-M63 87801286 B&C Steel and stainless steel 1
Consisting of: each. 1 ea M16, M20 (PG13), M25, M32, M40, M50, M63, transport case

1049
DIE PLATES

SW-WD punching tool (SUB-MIN-D)

PRODUCT INFORMATION SPECIFICATIONS

Punching tool for creation of SUB-MIN-D
plug cut-outs (9 to 50 poles). Simple and Steel
quick creation of these cut-outs, e.g. for
connection of data transmission cables.
Corresponding tension bolt is included in the
delivery.

Type Order No. Tensioning screw Punching for Steel type Pack
Type qty.

Hole perforator for SUB-MIN-D plug

SW-WD 9-pole1) 87801360 L SUB-MIN-D 9-pole Sheet steel 1
SW-WD 15-pole1) 87801362 L SUB-MIN-D 15-pole Sheet steel 1
SW-WD 25-pole 2)
87801364 L SUB-MIN-D 25-pole Sheet steel 1
SW-WD 37-pole 2)
87801366 L SUB-MIN-D 37-pole Sheet steel 1
SW-WD 50-pole2) 87801368 L SUB-MIN-D 50-pole Sheet steel 1

1)
suitable for sheet steel <= 2 mm (0.12 in)
2)
suitable for sheet steel <= 1.65 mm (0.06 in)

1050
DIE PLATES

SW-ASN universal punching tool

PRODUCT INFORMATION SPECIFICATIONS

Universal punching tool for creation of
various cut-out sizes and shapes. Tools with Steel
hole punch width 15 and 20 mm.

Type Order No. Hole punch width Hole punch Length Hole diameter Steel type Pack
inch inch inch qty.

Special ASN nibbling tool

SW-ASN 151) 87801370 0.59 0.26 0.85 Sheet steel 1
SW-ASN 201) 87801372 0.79 0.35 1.12 Sheet steel 1

1)
suitable for sheet steel <= 2 mm (0.12 in)

1051
REPLACEMENT PARTS

Spare parts list for punching tools

PRODUCT INFORMATION SPECIFICATIONS

Spare parts for the entire punching tool
system. Steel

Type Order No. Tensioning screw Length Pilot hole Pack

Version inch inch qty.

Tensioning screw
SW-WE-ZS Type A 87801410 A 3.94 0.39 1
SW-WE-ZS Type B 87801412 B 3.94 0.45 1
SW-WE-ZS Type C 87801414 C 4.72 0.79 1
SW-WE-ZS Type D 87801416 D 6.50 0.94 1
SW-WE-ZS Type E 87801434 E 6.81 1.18 1
SW-WE-ZS Type F 87801436 F 5.55 0.79 1
SW-WE-ZS Type G 87801438 G 4.17 0.55 1
SW-WE-ZS Type H 87801440 H 3.43 0.39 1
SW-WE-ZS Type K 87801442 K 4.17 0.67 1
SW-WE-ZS Type L 87801444 L 3.43 0.39 1

Spacer bushing set

SW-WS-DS 3-pce. 87801430 1
SW-WS-DS 5-pce. 87801432 1

Pre-drill
SW-WE-VB 0.39 inch (10.0 mm) 87801420 1
SW-WE-VB 11.0 mm 87801422 1
SW-WE-VB 11.5 mm 87801424 1

Replacement stamp for special nibbling tool

SW-ASN 15 stamp 87801374 1
SW-ASN 20 stamp 87801376 1

1052
Appendix

1053
Protection classes in accordance with DIN EN 60529

An important element for housings is protection of integrated IP protection classes are indicated through a two digit code
elements against drilling, foreign particles and water. The various (IPXX). The first digit indicates protection against contact and
protection properties are divided into foreign particles, the second the water protection factor.
IP classes (IP = international protection). The framework con- Accordingly the class IP65 is completely protected against con-
ditions that a protection class must guarantee are laid out in DIN tacts, dustproof (1st digit = 6) and is protected against jets of
40050 and IEC-EN 60529. water from a nozzle in all directions (2nd digit = 5).

First Contact protection Foreign particle pro- Second Brief description Water protection
index tection index
number number

0 No protection 0 No protection

1 Protected against The object probe, a sphere 1 Protected against Drops which fall vertically must not
solid foreign objects of 50 mm (0.49 in) in vertical falling drops have any harmful effect.
of 50 mm (1.97 in) diameter, must not fully of water
and larger penetrate.

2 Protected against The object probe, a sphere 2 Protected against Drops which fall vertically must not
solid foreign sub- of 12.5 mm (0.49 in) in diagonally falling have any harmful effects if the hous-
stances of 12.5 diameter, must not fully (up to 15°) drops of ing is inclined at an angle of up to 15°
mm diameter and penetrate. water at either side of the perpendicular.
above
3 Protected against The object probe of 2.5 3 Protected against Water which is sprayed at an angle
solid foreign sub- mm, shall in no way pen- diagonally falling of up to 60° from either side of the
stances of 2.5 mm etrate. spray (up to 60°) perpendicular must not have any
diameter and above harmful effects.

4 Protected against The object probe of 1.0 4 Protected against Water splashing against the enclosure
solid foreign sub- mm, shall in no way pen- spray from all from one direction shall have no
stances of 1.0 mm etrate. directions harmful effect.
diameter and above
5 Dust-protected The ingress of dust is not 5 Protected against Water which is sprayed in a jet
fully prevented; however, it jets of water against the housing from any direction
must not penetrate to such (nozzle) must not have any harmful effects.
an extent that satisfactory
operation or safety are
impaired.
6 Impervious to dust No ingress of dust. 6 Protected against Water projected in powerful jets from
strong water jets any direction against the housing shall
(flooding) have no harmful effects.

7 Protected against Water must not penetrate to an extent

the effect of tem- that will cause harmful effects if the
porary immersion housing is temporarily submerged in
in water water under pressure and under time
conditions.
8 Protected against Water must not penetrate to such
the effect of an extent that it will cause harmful
temporary sub- effects if the housing is permanently
mersion in water submerged in water.
9k Protection against IP x9K according to DIN 40050
highly pressurized Water jet at 0°, 30°, 60° and 90°
water/steam jet Cycle: 30 seconds each
cleaning Distance: 10 – 15 cm (3.94 – 5.91 in)
Water volume: 14 – 16 liters (3.70 –
4.22 gal) per minute
Water temperature: 80 °C +/- 5 °C
(176 °F +/- 9 °F)
Water pressure: 80-100 bar

1054
Description of fire classifications according to UL 94

FIRE CLASSIFICATION HB

The material burns slowly in the horizontal combustion test. The rate of combustion must not exceed 3 inches/min. for wall
thicknesses of up to 3 mm (0.12 in), and 1.5 inches/min. for wall thicknesses over 3 mm (0.12 in). Any materials exceeding these
combustion rate limits are not registered by UL.

FIRE CLASSIFICATION V2

In the vertical combustion test, self-extinguishing must occur after an average of 25 seconds (individual values not to exceed 30
seconds). Any dripping material may ignite cotton wool located underneath. However, any afterglow must not exceed 60 seconds.

FIRE CLASSIFICATION V1

In the vertical combustion test, self-extinguishing must occur also after an average of 25 seconds (individual values are not to
exceed 30 seconds). However, any material dropping off must not ignite cotton wool placed underneath. Any afterglow must not
exceed 30 seconds.

FIRE CLASSIFICATION V0

In the vertical combustion test, self-extinguishing must occur after an average of less than 5 seconds (individual values not to ex-
ceed 10 seconds). However, any dripping material must not ignite the cotton wool and any afterglow must not exceed 30 seconds.

1055
General information

Approved for EU railways

MATERIALS
The use and combination of widely varied materials like plas-
CSA approval
tics of all types, elastomer or metals means that Murrplastik
products can be used in a variety of situations.

EX approval

UR approval
CHEMICAL PROPERTIES
Reactions with chemical substances differ according to the
CURUS approval individual plastics and elastomers.

General technical data

Additional information

CE (EU Directive 765/2008)

FIRE BEHAVIOR
Self-extinguishing materials and material alloys allow for the
RoHs (EC Directive 202/95/EC) use of plastics in critical areas.
The products or the raw material are usually certified and
classified according to UL 94.
WEEE (EC Directive 2002/96/EC)

TEMPERATURES SPECIFICATIONS
The temperature ranges quoted for the individual products
must be noted in application.

APPROVALS
Our products boast a large number of approvals and
certifications, e.g. GL, UL/UR, CSA, DIN EN. Note the
specifications in the catalog and product data sheets.

IP PROTECTION CLASS
The IP protection class indicates the tightness of products
against solids and water.
The values are also related to static applications. With
dynamic applications, the protection class may change.

1056
Index of types

TYPE PAGE TYPE PAGE TYPE PAGE

AB-Clip 982 KDL/D-EN 949 KDT/VE 895

AP/RI 1019 KDL/D-mono 884 KDT/X 887
APM/RI 1019 KDL/D-R 882 KDT/X-ASI 888
ATG/E 895 KDL/E 892 KDT/X-EN 952
ATG/X 888 KDL/H 885 KDT/X-LAN 889
ATG/XL 889 KDL/H-EN 951 KDT/X-USB 889
ATG-EMV 973 KDL/N-AB 981 KDT/ZE 894
BF 1029 KDL/S 898 KDT/ZE-ASI 895
BN 1026 KDL/S 24 899 KDT/Z-EMV 972
BNW 1036 KDL/S-G 889 KDT/Z-Jumbo 905
BP 1017 KDL/S-K 889 KDZL 1002
BP RI 1828 KDL-EMV 970 KH 1031
BP/H 1017 KDL-Jumbo 904 KKB 1027
BP/N 1017 KDM 944 KKBW 1039
BST KDT/ZE-ASI 895 KDM/F 945 KM 1038
BTG/E 895 KDM/G 946 KS 1037
BTG/X 888 KDP 100 931 KS-fix 1003
BTG/X-EN 952 KDP 105 933 MCS-EMV 964
BTG/XL 888 KDP 120 935 MCSZ-EMV 964
BT-Jumbo 905 KDP 134 937 MFZ-EMV 965
BTK 973 KDP 149 938, 940 MMH 1040
BTK/E 895 KDP 160 942 MSC-EMV 960
BTK/X 888 KDP 24 914 MSCF-EMV 961
BTK/X-EN 952 KDP 24/AP/EN 1023 m-seal® EMC 1012
Catch hook 1014 KDP 24/AP/LO 1022 m-seal KV®
1008
DCS-EMV 963 KDP 24/AP/RI 1019 m-seal® MV 1010
DCSZ-EMV 963 KDP 24/AP/SA 1021 RAS 948
DF-EMV 967 KDP 90 924 – 930 RFZ-EMV 968
DFZ-EMV 967 KDP AP 149 1020 SAS 983
DH 1024 KDP AP/RI 1019 SBB 1015
ELB 1025 KDP AP/SA 1021 SC-EMV 960
EMC solutions assortment kit 969 KDP BP 1018 SCF-EMV 961
FBE 985 KDP/E 912 SCFZ-EMV 962
KAF 1004 KDP/EN 953, 957 SDT/ZE 895
KAF/DC 978 KDP/EN-RA 955 SF-EMV 966
KAF/EK 976 KDP/F 915 SFZ-EMV 966
KAF/K 975 KDP/H 1016 SH 1030
KAF/NI 1005 KDP/N 908 SK 986
KAF/SF 977 KDP/N-EMV 974 SKS-EMV 987
KB 1027 KDP/R 920 SMF 984
KB-fix 1032 KDP/R AP/SA 1021 SW-ASN 1051, 1052
KBL 1006 KDP/R-KGM 921 SW-HF 1044
KBM 1028 KDP/X 910 SW-HG 1042
KBW 1039 KDP/Z 917 SW-HW 1043
KDL 970 KDPR/F 922 SW-WD 1050
KDL-AB 980 KDT/S 900 SW-WE 1047, 1052
KDL/C 880 KDT/S-G 901 SW-WQ 1046
KDL/D 882 KDT/S-K 901 Continued on next page

1057
 Index of types

TYPE PAGE TYPE PAGE TYPE PAGE

SW-WR 1045
SW-WS 1049, 1052
VP/N 24 1015
VP24 1015
VST 1033
ZL 979, 991
ZL xx-AB 979
ZL-AH 993
ZL-AM 996
ZL-C 998
ZLF 1001
ZL-Fix 990
ZL-MF 1000
ZL-MH 994
ZL-SW 997

1058