QC and QA Electrical
QC and QA Electrical
Job Description
Position Summary:
This position reports directly to the senior electrical engineer and discipline lead, and is
responsible for overseeing and performing electrical engineering and related activities
associated with TerraTherm projects, including: heater and electrical equipment calculations
and specifications. This position will gradually become more involved with permitting, cost
estimation, equipment procurement and fabrication, system startup, data management and
reporting, and system troubleshooting (as required) for TerraTherm. This position involves a
good amount (~50%) of travel to our project sites throughout the continental United States.
Responsibilities:
Design Engineering:
• Electrical design tasks may include heater calculations, electrical load calculations, short-
circuit and overcurrent protection calculations, transformer and wire sizing, etc.
• Develop electrical equipment and power distribution equipment specifications; prepare
electrical load calculations for single and three phase loads; prepare electrical single line
drawings, schematics and detail drawings as required.
• Should have experience with ETAP (or similar) power system analysis tool.
• Assist with securing electrical service and rates for projects and bids with local or
regional utility companies. Interface with permitting authorities and electrical
subcontractors for electrical construction work.
• Develop equipment schedules and material takeoffs; prepare requests for bids for
subcontractors and material vendors. Prepare construction and equipment
specifications, including means and methods. Compare bids and recommend the
selection of subcontractors and material vendors.
• Become involved with PLC configuration programs, ladder logic diagrams. Develop
point-point wiring diagrams and select components for company-built PLC/control
panels.
• Assist with support team on site visits for new project opportunities to determine the
available site power, any site utility/facility constraints, collect information regarding
construction permits, evaluate potential site support contractors, and assist with
preparation of cost estimates.
• Oversee maintenance, testing and repair of company-owned electrical equipment.
• Perform the function of field engineer including hands on field work and/or field
engineering, supervision of subcontractors, review of daily work production reports,
schedule and budget. Inspect work of company staff and subcontractors. Communicate
issues with senior electrical engineer.
• Communicate and coordinate work quality or safety concerns to the TerraTherm project
manager, general manager and technology manager as necessary to ensure proper and
safe completion of the project.
• Assist the TerraTherm construction supervisor and system operators with equipment
commissioning and startup, and operational troubleshooting as necessary. Cover
system operator rotations (typically 1 to 2 weeks) when necessary.
• Perform on-site and in-house electrical training for the field operations group.
• Assist in developing and implementing staff development and training programs for
direct reports. Set annual goals for direct reports and track progress during regular staff
check-ins.
• Ensure all TerraTherm designs and installations are consistent with applicable codes,
regulations, and standards.
• Assist in conducting annual electrical training programs for staff engineers, construction
personnel, and operations staff.
Additional Responsibilities:
• Always look for new and better ways to streamline the cost and performance of thermal
remediation projects, capture information, and make overall improvements as learning
takes place.
• As directed, develop new methods/equipment in accordance with approved budget and
scope.
• Continue to gain knowledge on the remediation of hazardous materials by reading
relevant trade journals and related information.
• Travel as necessary to perform position description duties. Expect ~50% travel for
periods of 1 to 2 weeks and occasionally up to 4 weeks at one time, based on project
work load.
Qualifications:
Experience Required:
• At least 5 years direct engineering experience or 5 years equivalent experience in
electrical design/construction industry
• Demonstrated hands on experience with electro-mechanical and process equipment
fabrication, integration, operation and trouble shooting.
TerraTherm, Inc. – 151 Suffolk Lane, Gardner, MA 01440 – 978-730-1200 – www.terratherm.com –
Email [email protected]
Electrical Engineer II
Job Description
• Ability to work with electrical meters and hand and power tools.
• Small / start-up company experience preferred, but not required
• Prefer at least 1 year experience in a remediation technology engineering environment,
but not required
• Strong written and verbal communication skills
• Strong computer skills, including proficiency with Microsoft Word, Excel, AutoCAD
Education Required:
• BS or higher Electrical Engineering degree
• Advanced training and experience in electrical power system design and distribution
Certification/Licensing:
• 40 Hour OSHA HAZWOPER training, and current 8 hour refresher training (preferred, but
not required)
• EIT strongly preferred
Skills/Aptitudes:
• Self-starter and outgoing personality traits
• Demonstrated leadership skills
• Ability to take direction and act independently
• Strong communications and organization skills
• Ability to manage multiple priorities and stay organized while doing so
Level of Supervision:
• Work independently based on general instructions, directions or objectives received
from senior electrical engineer