Version

June , 2017
Notice

All rights reserved. Reproduction of any part of this manual in any form
80MM Portable MINI Thermal Printer whatsoever, without manufacturer’s express permission is forbidden.
The contents of this manual are subject to change without notice.
Instruction Manual

The above notwithstanding, manufacturer can assume no responsibility

for any errors in this manual

Declaration
 Instruction Mannual 80MM Portable MINI Thermal Printer

Notes on safety 1.Features & Application area

一．Features
This section presents important information intended to ensure safety
It can print 80mm width thermal paper
and effective use of the printer. Please read carefully.
Paper dimensions 40mm
Be sure to use the specified battery and power source provided by our
company. Connection to an improper power source may cau se fire , High-speed,Clear printing
explosion or damage to the printer. Super power lithium electricity, standby time can reach 5-6 days
Don’t put the battery into the fire or water, don’t disassemble or modify Auto sleep, auto awake, save electricity
the battery, don’t be short circuit, otherwise may result in injury or f ire Small size、light weight、reliable performance、simple to connect、
even explosion. easy to use
Please don’t open the paper room cover when it is printing or just when 二．Application area
printing is over, do not touch the print head with hand or body, overheat Relative to the traditional thermal receipt printer, Mini portable printer
may cause scald. has smaller body, more reliable capability, more convenient printing and
portable advantages. The Mini printer can be worked on a lots of locations,
Notes on using such as the TAXI bill printing, administrative fees receipt printing, post
receipt printing, restaurant ordering information printing, online payment
1、 Do not store the printer in hot and humid conditions. information printing, etc. With the rapid popularity of smart-mobile, Mini
2、 The lithium battery have a character that if it is not used for several months, printer will be more widely used in the near future.
it possibly can’t be charged ever. So for that, we suggest to use the adapter
what less than 1A for charging . 2.Specification
3、 The printer’s power adapter is to be connected to a stable power 110~220
Volts, please do not use other devices on the same power socket, to avoid
PrintingMethod: Direct Line Thermal
voltage fluctuations.
4、 Avoid water or conductive material (for example: metal). If water is present Speed:≤90mm/sec
on the surface please turn off the power immediately. Reliability TPH Life: 100000000 pulse / dot or 100km
5、 Please ensure that a thermal paper roll is always inserted in the printer to Resolution: 203DPI (8dot/mm)
avoid damaging the printing roller and the printer head. Printing Width: 72mm (576dot)
6、 Please ensure that your printer is serviced and repaired by a qualified Paper Width: 79.5±0.5mm
technician. No responsibility is taken for misuse and/or non-qualified Paper thickness: 0.06-0.08 mm
servicing. Roll Diameter: φ≤40mm
7、In order to ensure print quality and longevity of your printer, please ensure
Power: rechargeable lithium battery/NI-MH battery
that only good quality thermal paper rolls are used.
Battery: 7.4VDC, 2000mAh
8、Please keep this manual in a safe place, where it can be accessed easily
Charging method: external charger
and used for your reference.
1 2
 Instruction Mannual 80MM Portable MINI Thermal Printer

Print parameters: support to download the Logo trademark

3.Appearance
FontA:12*24dots,1.5(W)*3.0(H)mm
FontB: 9*17dots, 1.1(W)*2.1(H)mm
FontC: 9*24dots, 1.1(W)*3.0(H)mm
Simplified/Traditional:24*24dots,3.0(W)*3.0(H)mm
Printing Chinese character: Chinese: simplified Chinese 24x24 point. support
Charging: Red Light
Full: Blue Light
GB18030 font library, support Taiwan and HK traditional(complex font)
ANK: ANK characters
Extended character table:
Model:8001
OEM437/Katakana/OEM850/OEM860/OEM863/OEM865/West Europe/Greek/ Size:103*100*46 mm
Hebrew/EastEurope/Iran/WPC1252/OEM866/OEM852/OEM858/ Weight:260g(with Battery)

IranII/Latvian/Arabic/PT1511251/OEM747/WPC1257/Vietnam/OEM864/
Hebrew/WPC1255/Thai
Emulation: ESC/POS command
Line spacing: 3.75mm (Default)
Model:8002
Interface: Serial, USB, Bluetooth 2.0/Two-mode Bluetooth (optional), WIFI Size:102*108*43.5 mm
(optional) Weight:285g(With Battery)

Driver: Win2003/Win2000/WinXP /Win7/WIN8/Win10/LINUX/Android

Working Temperature: -10～50℃
Humidity: 10～90% Charging: Red Light
Full: Blue Light
Weight: 260g
Barcode Types:
1DBarcode: UPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)/CODE39/ITF/
CODABAR/CODE93/CODE128
2D Barcode:QR CODE

Power Port(9V DC)

3
4
 Instruction Mannual 80MM Portable MINI Thermal Printer

5.The installation of the paper roll

Model:8003
Size:113*109*52 mm
Weight:275g(With Battery) The printer use 80MM thermal paper, and adopt to easy paper loading. So
the paper is very convenient install.
Paper diameter Max 40mm.
Thermal paper installation method is as follows:
（1） Open the printer top cover
（2） Thermal Paper as follow Graph to put into paper storehouse

（3）Put out a little of the paper outside printer,then close the top cover.
（4）Use paper sawtooth tear off redundant paper
Button Operating Instructions

4.Communication Interface （Blue Light） ERROR(Red Light）

CHARGE(Red Light
Printer Status
/ Blue Light)
1. RS232(COM)：standard RS232 Communications Protocol OFF OFF OFF Printer Close
2. USB：standard USB Communications Protocol Flash OFF OFF Printer dormant
3. Bluetooth 2.0: General Bluetooth2.0 Communication Protocol
ON（Always） OFF OFF Printer open and have paper
Two-mode Bluetooth: General Bluetooth2.0 / 4.0 Communication
ON（Always） Flash OFF Printer Open , without paper
Protocol
CHARGE(Red Light) Charged with Battery
4. WIFI: Standard 802.11b/g/n Protocol
CHARGE( Blue Light) Full of Battery
Display 1 or 2 shelf Low power of Battery
Hold down power for 3 seconds Printer OPEN/OFF

5 6
 Instruction Mannual 80MM Portable MINI Thermal Printer

Under power on, the paper feeding begins when press

the printer paper feed
6.Operating Manual for Android OS
【F E E D】b u t t o n
This manual applies to all of our android OS compatible printers ( both
Power off the printer, then hold down the【FEED】
button and press the power button at the same time. 58mm & 80mm width printer)Currently, the common communication ports
The printer Self test
Wait 2 seconds ,then loosen the【FEED】button, we used for android OS are ( USB、Ethernet、Bluetooth and WiFi )
the current setting will be printed out. If you want to use Android Device connected with our printer, fiIf you
want to use Android Device connected with our printer, first of all make sure
Power off the printer, then hold down the【FEED】
button and press the power button at the same time. Transformation in both that printers can be supported Android Operate System, proceed as follows
Wait until the power indicator & 【ERROR 】led are English and Chinese ( Bluetooth as example):
both on, and then 【ERROR】led goes off, then Step 1:
loosen the【FEED】button, the language setting - Insert the CD driver disc into the CD-ROM, connect your Android device
status will be printed out.
with your computer;
Power off the printer, then hold down the【FEED】
Step 2:
button and press the power button at the same time.
Wait until the power indicator &【ERROR】led are
- Find the File Named “ SDK” from the CD driver, Then follow the path :
both on, and then 【ERROR】led goes out, after, “ Android SDK--- BLUETOOTHDEMO ---bin---BT-POSPrinter.APK “,
【ERROR】led goes on again ,then loosen the Set printing density and install it into your Android device.
【FEED】button, the density setting status will be
Step 3:
printed out. (It has three levels setting for printing
density, it is a circle Low levelMiddle levelHigh
- Connect your Android device with our printer once the installation done .
levelLow level…, Please switch the density Step 4:
status by repeating operation presented above.)
- Find this icon on the Android device, and click “Connect Printer”
Power off the printer, hold down the【MODE】button to search the Bluetooth printer, (Default pairing password for Bluetooth
and press the power button at the same time. Wait
connection is “ 1234” ) . After the connection successfully, click on the "
until the power indicator &【ERROR】led are both on,
Print Test Page", the printer will work
and then 【ERROR】led goes out, then loosen the
Hexadecimal printing
【MODE】button. The printer turns into the hexadecimal If you use the "Ethernet interface", "USB", "WIFI" communication,
printing mode and print the presentation.Way to quit replace "BLUETOOTHDEMO" from "Step 2" into the corresponding
hexadecimal printing : The way to quit hexadecimal
"NETDEMO", "USBDEMO" and "WIFIDEMO".
printing mode is switch off the printer .
Please noted, the customers can get all the original code from
below path if you need to develop your own APK ( Path is:
src com zj printdemo )

7 8
 80MM Portable MINI Thermal Printer

7.Operating Manual for IOS APP

1. Download the Test Tools “POS-PrinterV1.0” from App Store,as below:

(Image1)

2. Turn on the Bluetooth setting of IOS device , then click “POS-Printer”:

( Image 3)

(Image 2)
3. Into the App of “POS-Printer”, select the paper width as below:

9 10
 Instruction Mannual

4. Select the way of communication of printers, “Bluetooth” or “WIFI”:

6, If connect with WIFI, please make sure that your device WIFI is connected
with printer (both of them in the same Network segment). And then click
the “ Connect”, enter into the printer IP :

11 12
 Instruction Mannual 80MM Portable MINI Thermal Printer

8, Other features of this APP:

9.The applicable version: can be compatible with IOS6.0 or above versions.

7, If above steps are successful, then you can print text to have a test:
8.The Bluetooth configuration
Step1: Make sure your device ( like PC, Note Book ) has B luetooth function,
then once the Bluetooth for your device is activated, you will see the Bluetooth
sign showed in the right bottom side of your device(like PC) screen.

13 14
 Instruction Mannual 80MM Portable MINI Thermal Printer

Step2:Power on the Bluetooth printer.

Step3:To add the Bluetooth printer, please left-click the click “Add
a Bluetooth Device” ,then you will enter wizard screen , please choose “My
device is set up according and ready to be found”click “Next”(showed as below).

Step5:Once the Bluetooth printer is found. You can see it listed on the screen,
click “Next”

Step4:if you can see screen as below,then the device is searching the bluetooth
printer,please wait.

15 16
 Instruction Mannual 80MM Portable MINI Thermal Printer

9.How to use the ports of USB/Serial(RS232)

Step7:if you can see the screen as below, that means the Bluetooth printer
is already connected. Please notice the assigned COM ports ,then Click”Finish”.

Step8: Now if you want to test if the printer is OK to print, you could use a
com tool , and send printed data to Outgoing COM port( just as above image
shown: COM5).
(Com tool setting is 9600,N,8,1.)

17 18
 Instruction Mannual 80MM Portable MINI Thermal Printer

2、Select the language you need and click the button”Confirm”,and show 4、Click”next step” ans show as below(customer is available for modifying
the imgae as below,then click the button”next step
channel of driver installation or default one)

3 、please read the related terms carefully,and install it as agreement as

5 、Click the button”next step”again and show as below and install it:
below

19 20
 Instruction Mannual 80MM Portable MINI Thermal Printer

6、After installation,the related interface will be shown as below,select 8.Finish the driver installation as below:
operation system of your computer and printer model,click”USB port for
testing”, if you communication with USB port, USB port of computer will
be identified automatically .Click he button”next step”and install
continuously as below :

9.2 Serial port to be used (if you choose a serial print)

1. Open the Printer Properties screen, and then select the "Port" item, as
shown below:
7、Click the button”Start Installation” and shown as below. And select
installation:

21 22
 Instruction Mannual 80MM Portable MINI Thermal Printer

2. Select the list of ports "COM1" → "Configure Port", the printer factory
default settings as shown below:

Click "Apply" again.

3.Return to the "General" tab, click "Print Test Page" as shown below:

You can see the setting parameters of serial port from self-test page, Click
"Apply", then click "OK" (Note: This setting must consistent with the setting
parameters of serial port from the printer self-test page, otherwise it will be
garbled case) appears as shown below:

23 24
 Instruction Mannual 80MM Portable MINI Thermal Printer

If the printer prints a normal page, then it shows that the work was successful.
If you feel the print speed is slow, please click on the "Device Settings" →
"Print Mode" → Choose "soft font" button as shown below:

Enter “ admin” for the user name and default password is also “admin”.
Press ok and then Next:

10.The WIFI configuration

80mm MINI Portable Bluetooth Printer WIFI parameters configured
through a Browser, the steps are as follows:
1, Connect the printer with PC and switch on the printer.
2, Find the wireless network and link it. Then find the file named“HF-LPB100”
and link it – after successful connection , go to next step.
3, Enter the IP address ( 10.10.100.254 ) into the PC browser, press Enter we
can see as below:

25 26
 Instruction Mannual 80MM Portable MINI Thermal Printer

Above are all your current wireless network, select one of your wireless device
Select “AP+STA mode” , and save.
available to be used, then click “ OK ”.
Note: When the module is selected to STA mode (NIC), then re-start the
6, Input the correct configuration within the dialog, as below:
module, you can not reuse the wireless configuration, SSID number can not
be found.

4, Select “ STA Setting ” as below;

STA setting is complete, click "save".

7, Select "Other Setting", setting as below:

5, Then click “Scan”, it will appear selection as below:

9600

Enable

27 28
 Instruction Mannual 80MM Portable MINI Thermal Printer

After finish the setting, click “ Save”. If details shows as below , means connection is Ok
8,Restart the module, as below:

Return to the driver -" properties " - " port "-" add port ", consistent with the
Module configuration is complete add ports :
9, Click computer “Start” “ Run”, Input word “CMD”，as below： WIFI port choose：
1,Open the Printer Properties screen, then select the "Port" item, as shown
below:

Input “ping 192.168.1.105 -t” as below

29 30
 Instruction Mannual 80MM Portable MINI Thermal Printer

4,Add the standard TCP / IP Printer Port Wizard, select the device type, and
then click “Next” to continue the installation, See the following image:

2,Click "Port" to Select “Add Standard TCP/IP Printer Port Wizard”, click
“Next” to continue the installation.

5,Click “Finish” to complete the installation, see the following image:

3,Enter the IP address into “Printer Name” dialog, and click “Next” to continue
the installation.

31 32
 Instruction Mannual 80MM Portable MINI Thermal Printer

6, Installation will return to “Properties” interface, and then select the

correct IP port, click “Apply”, you can now print a test page. See the
following images:

11.Cleaning of printer head

Cleaning of printer
When the printer has the following conditions, you should clean the printer head:
①　The printer does not print clearly and the thermal paper is Ok.
②　The printer Print pages lengthways is not clear
③　It’s getting too noisy while feeding paper or printing.
Printer head cleaning steps are as follows:
1. Power off the printer and open the paper room cover. Remove the thermal
paper roll.
2. If the printer just finished printing , please wait for the print head to cool
down.
3. With a soft cotton cloth dipped in ethanol (please make sure there is no
dripping), wipe the thermal printer head gently and remove any dust or
7, Return to “ General ” and click “ Print Test Page ” as below:
stains.

33 34
 Instruction Mannual 80MM Portable MINI Thermal Printer

4. Wait for the complete evaporation of any ethanol, then place the thermal 7. Printing speed is very slow for serial printer
paper roll back in the printer and close the paper room cover, then print a A: follow this path and change the set accordingly : Driver -- Properties --
test page. Device Settings -- Print Mode -- Print as soft font.
Notes： 8. Water or other liquid spills into the printer
When the printer maintenance must ensure that the power is shut down A: Cut off the power,we can dry the main board or printer head with a hair
Hands or other metal tools away from the surface of the printer head,do not dryer, careful of the temperature ( average 50 degree is ok )
use tweezers to scratch the surface of the printer head and other sensitive 9. The printer can't work
parts.
A：The battery maybe without electricity，please use power adapter to
Do not use gasoline,acetone and other organic solvents for printer head
charge. Then you try to star the printer, if the printer has same problem, please
cleaning.
send to service center for repair.
12.General Troubleshooting 10. Can not search the Bluetooth printer
A：Please check the equipment "Bluetooth" function whether opened, the
1: Why serial port printer printing messy code? communication whether normal, then replug the printer "Bluetooth Module"

A: Ensure the baud rate setting in the PC is same as the printer baud rate. try to connect and search “Bluetooth” again, if the problom are still existed,

( we can see printer baud rate from self test page) please send the specified location repair.

2: Self printing test is ok,but printer does not work after driver installation.
A: Recheck the installation according to above installation wizard and see if
we selected the right port or ask service center for advice if needed.
3: Malfunction of paper feeding?
A: Use soft brush to clean the paper sensor and try again or send it to the
service center for repair.
4．Malfunction of the indicator light
A: Check the cable connecting way / adapter / power cord / switch on or off?
Or contact the service center for repair.
5．Messy code printing except Arabic numeral printing.
A: language switching incorrectly, please use our tool "IPrinter" (you can find it
on the enclosed CD) to change the language what you want print.
6．Red indicator keep flashing during the printing.
A: Usually it is due to the high temperature of the print head. If printing
stopped,please contact the service center for repair.

35 36